-
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely.
Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable. ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £36000 Per Annum None
Posted: 2025-12-23 10:09:02
-
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team.
The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems.
This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package - Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc90000 - Swiss Franc130000 per annum
Posted: 2025-12-22 01:13:35
-
Monday - Friday Maintenance Engineer, Shift Engineer, MON to FRI role, you will be joining a leading specialist that transforms materials into high-quality products for the construction and manufacturing sectors, based near Peterborough.
Excellent training, ongoing development and clear career advancement opportunities are provided.
Location: Peterborough
What's in it for you as a Maintenance Engineer?
£54,000 salary
Monday to Friday - 3 Shift (6-2/2-10/10-6)
31 days' holiday (pro rata), increasing by one day each year up to 36 days, including bank holidays.
Peterborough location is easily accessible from Stamford, Huntingdon, March, Spalding, Bourne, Wisbech, Grantham, Oundle, Ely, Northampton, Bedford, Corby, Kettering
Overtime available at 1.5x and 2x
KPI Bonus
Company pension
Excellent training, ongoing development and clear career advancement opportunities
Main Responsibilities of the Maintenance Engineer?
Providing full plant-wide maintenance support, repairs and technical assistance to ensure production output and efficiency targets are consistently achieved
Carrying out maintenance on a wide range of factory manufacturing machinery and automated equipment
Supporting machine set-ups and changeovers, ensuring compliance with QA standards and maximising efficiency during production transitions
Identifying faults, diagnosing issues and implementing effective and permanent engineering solutions
Requirements for the Maintenance Engineer?
Recognised Engineering Apprenticeship to become a Maintenance Engineer / Electrical Engineer/ Maintenance Engineer, Shift Engineer, NVQ Level 2-5 in Mechanical Engineering Experience with industrial machinery, conveyors, pumps, motors, and automation systems
Strong awareness of Health & Safety and safe working practices
Proven ability to fault-find, repair and resolve engineering issues confidently
Previous experience working as a Maintenance Engineer or in a similar engineering maintenance role
....Read more...
Type: Permanent Location: Peterborough, England
Start: ASAP
Salary / Rate: Up to £54000.00 per annum + KPI bonus, pension
Posted: 2025-12-21 16:17:37
-
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians.
The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £35000 Per Annum None
Posted: 2025-12-21 11:23:24
-
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry.
Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects.
Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilise digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £34000 Per Annum None
Posted: 2025-12-21 11:22:22
-
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £17 - £20 Per Annum None
Posted: 2025-12-18 11:47:42
-
Mechanical Fitter position in the Dewsbury area paying £45,427.20.
Fully days-based role working Monday - Friday.
Offering company benefits such as company pension scheme, 1.30pm finish every Friday, healthcare cashback plan and free onsite parking.
Their site is easily commutable from Leeds, Bradford, Wakefield, Batley and other surrounding areas.
Salary and Benefits of the Mechanical Fitter
£45,427.20 annual salary
Overtime paid at 1.5x
Early finish every Friday (1:30pm)
Healthcare cashback plan
Company pension scheme
Free onsite parking
Permanent, stable role at a single site
The Role of the Mechanical Fitter
As a Mechanical Fitter, you will be responsible for the installation, maintenance and repair of mechanical equipment and pipework across the site.
Working in high-hazard areas, you will play a key role in maintaining safe, reliable and efficient plant operations.
Your duties will include:
Mechanical fitting and installation of plant equipment
Installation, modification and repair of process pipework
Working on pumps, valves, vessels and associated mechanical systems
Reading and working from engineering drawings, isometrics and P&IDs
Carrying out planned and reactive maintenance
Supporting shutdowns and improvement projects
Working in line with strict health, safety and permit-to-work procedures
What We're Looking For
Time-served Mechanical Fitter or completed apprenticeship in Mechanical Engineering.
Proven pipefitting experience within industrial or process environments
Experience working in chemical, water treatment or high-hazard manufacturing sites.
Ability to work safely, independently and to a high standard.
Strong attention to detail and problem-solving skills.
How to Apply: To apply for the role of Mechanical Fitter, please apply direct by submitting your CV or contact Toni-Marie Monks at E3 Recruitment.
....Read more...
Type: Permanent Location: Dewsbury, England
Start: ASAP
Salary / Rate: Up to £45427.2000 per annum + Pension, 33 Holidays + more!
Posted: 2025-12-17 09:33:10
-
Building Controls electrical panel design Engineer required to work on integrated building solutions.
Skills
Electrical apprenticeship or comparable qualification, happy to consider an Electrician nearing the end of their apprenticeship.
Panel Build experience or knowledge.
Understanding of electrical drawings
Role
Lay out and fit electrical panel components to its back plate.
Work from wiring diagrams and schematics
Troubleshoot and repair control panels.
Type: Permanent Location: Newtownabbey, Northern Ireland
Start: ASAP
Duration: Permanent
Salary / Rate: £23000 - £34000 Per Annum None
Posted: 2025-12-16 15:33:41
-
We are looking for a Junior BMS Panel Builder to join our team.
This role involves assembling, wiring, and testing control panels, with occasional fault-finding and repair tasks, both in-house and on-site.
Key Responsibilities
Assemble and install panel components on backplates.
Interpret wiring diagrams and schematics to wire and test control panels before shipping.
Troubleshoot and repair control panels in the workshop and at client sites.
Use various power tools, such as drills and jigsaws, as required.
Comprehensive training will be provided to the successful candidate.
Working Hours
Full-time role based at our Mallusk head office.
During probation:
Monday to Thursday: 8:30 am ??? 4:45 pm
Friday: 8:30 am ??? 3:30 pm
Post-probation: Flexible working hours are available.
Education and Experience
Ideally suited for individuals who have recently completed or are nearing the end of an electrical apprenticeship or qualification.
Prior experience as a Panel Builder and familiarity with electrical diagrams is an advantage.
A team player with the ability to work independently when necessary. ....Read more...
Type: Permanent Location: Newtownabbey, Northern Ireland
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £40000 Per Annum None
Posted: 2025-12-16 15:32:39
-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £52000 Per Annum None
Posted: 2025-12-15 13:08:07
-
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes.
The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2025-12-15 10:58:53
-
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians.
The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £46000 - £50000 Per Annum None
Posted: 2025-12-15 10:57:47
-
Our client is now seeking to appoint a highly skilled Controls Automation Engineer.
This role requires someone who has very strong knowledge and experience of electrical/automation and PLC systems to join the team.
Basic salary of £70,000 per annum, plus bonusOur client is a global industry-leading manufacturing business with a multimillion-pound turnover and impressive growth plans, supported with large-scale investment and an existing established network of manufacturing facilities across the UK.What's in it for you as Controls Automation Engineer?
Salary circa - £70,000 per annum
Bonus Scheme
Shift Pattern and Working hours - Monday - Friday DAYS
Competitive pension match
Employee Walfare Program
Extensive training and personal development are available, including accredited training and career development plans for those who want it.
Position Overview of Controls Automation Engineer
The role will be working as part of the Maintenance Team providing ‘Hands-on' Electrical & PLC Technical support to both Production and other internal functions throughout the Factory.
You will need strong skills and experience with breakdowns, fault finding, and changing of PLC parameters specifically.
The workload as an estimate will be balanced out Project work 60/40 projects, 70/30 projects lead.
Experience of installing servo drives and projects, capex improvements and HMI all required.
Providing plant-wide electrical maintenance service, departmental support and repairs on a wide range of machinery such as conveyor-based systems, hydraulic presses, moulding machines and packaging machinery, ensuring that all production targets are maintained.
Experience and Qualification Required for a Controls Automation Engineer
Recognised Electrical Engineering Apprenticeship & Qualification or equivalent UK level 3 qualification - NVQ, City and Guilds AND BTEC 3 or HNC/HND in Electrical Engineering
PLC Fault finding experience is essential
You will need strong skills and experience with breakdowns, fault finding, and changing of PLC parameters specifically.
Experience of installing servo drives and projects, capex improvements and HMI is all required
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
....Read more...
Type: Permanent Location: Basildon, England
Start: ASAP
Salary / Rate: Up to £70000.00 per annum
Posted: 2025-12-15 09:39:41
-
We are seeking an experienced Maintenance Team Leader to join a leading manufacturer based in Nottingham.The salary being offered is up to £60,000 with overtime at a premium.
The shift pattern for this Maintenance Team Leader role is 4 on 4 off, 6-6 days and nights.What's in it for you as a Maintenance Team Leader:
Salary up to £60k per annum
Pension contribution 20% and excellent benefits package
Training and career development
Days and Nights, 6am to 6pm, 6pm to 6am, 4 on 4 off shift pattern.
Main Duties & Responsibilities of the Maintenance Team Leader:
Providing plant wide PPM and reactive maintenance service, departmental support and maintenance repairs
Workload management overseeing the allocation of maintenance tasks across the department
Strengthen the team and enhance engineering capabilities to improve plant performance and increase efficiency
Subcontractor Management ensuring safety standards are met
Drive improvements in plant reliability through best practices.
Required Experience and Qualifications of the Maintenance Team Leader:
UK Apprenticeship in Engineering - NVQ Level 3 & BTEC Level 3 qualification or equivalent
Strong understanding of environmental health and safety practices
Familiarity with manufacturing costs and cost control
Proven experience in Mechanical or Electrical maintenance within a manufacturing setting
Experience with developing and implementing PPM (Planned Preventative Maintenance) activities.
If you are an experienced Maintenance Team Leader wanting to join a forward-thinking company, who wants to further their career with training, development and progression opportunities and fantastic prospects, please apply now... ....Read more...
Type: Permanent Location: Nottinghamshire, England
Start: ASAP
Salary / Rate: Up to £60000.00 per annum + Excellent Benefits
Posted: 2025-12-12 16:36:51
-
We are seeking an experienced Maintenance Engineer to join a leading manufacturer based in Nottingham.The salary being offered is up to £51,000 with overtime at a premium.
The shift pattern for this Maintenance Engineer role is 4 on 4 off, 6-6 days and nights.What's in it for you as a Maintenance Engineer:
Salary up to £51k per annum
Pension contribution 20% and excellent benefits package
Training and career development
Days and Nights, 6am to 6pm, 6pm to 6am, 4 on 4 off shift pattern
Main Duties & Responsibilities of the Maintenance Engineer include:
Providing plant wide PPM and reactive maintenance service, departmental support and mechanical repairs
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Required Experience and Qualifications of the Maintenance Engineer:
Recognised Engineering Apprenticeship, Level 3 NVQ and BTEC Level 3 in Mechanical Engineering, City and Guilds Mechanical Engineering Level 3 etc
Pneumatics, hydraulics skills
Welding skills would be an advantage but not essential
High degree of Health & Safety awareness
Ability to fault find, repair, and provide solutions to problems.
If you are an experienced Maintenance Engineer wanting to join a forward-thinking company, who wants to further their career with training, development and progression opportunities and fantastic prospects, please apply now... ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £50000 - £51000 per annum + Excellent Benefits
Posted: 2025-12-12 16:29:17
-
MIG Welder
Permanent or Contract Days, Earlies or Lates
Location: Near Ilkley, West Yorkshire
Salary: £15 21.90
Shifts: Days / Earlies / Lates (4-day week available on lates)
MIG Welder Overview
Are you a MIG Welder with experience in fabrication and working to high levels of accuracy? We have multiple exciting opportunities for skilled MIG Welders to join a market-leading manufacturer with a strong order book and excellent working conditions.
Why join this company as a MIG Welder?
- Permanent positions or 6-month+ contracts (PAYE or umbrella)
- 25 days holiday + bank holidays
- 10% shift allowance (earlies), 25% (lates)
- 4-day week available on late shift, early finish Fridays on others
- Overtime at 1.5x
- Enhanced pension contributions
- Employee Assistance Programme
Role overview MIG Welder
As a MIG Welder, you will be working primarily with mild steel plate (3mm10mm), producing bespoke assemblies to tight tolerances using technical drawings.
MIG Welder Key Responsibilities:
- MIG welding and fabricating mild steel parts to specification
- Reading and interpreting detailed engineering drawings
- Inspecting work for accuracy, size, and finish
- Using cutting and hand tools as required
- Operating rolling and swaging machinery (training provided)
- Moving materials safely with overhead cranes and lifting equipment
Requirements for MIG Welders:
- Level 3 Apprenticeship or NVQ in Fabrication & Welding (or equivalent)
- Strong MIG welding experience in a manufacturing environment
- Confident with technical drawings and welding symbols
- Safety and quality conscious with attention to detail
We're looking for MIG Welders who take pride in their work and are either seeking a long-term position or a stable contract with full-time hours.
Whether you're a permanent jobseeker or a contractor, we'd love to hear from you.
How to Apply for the MIG Welder Position
Apply now, or for more information, contact Rio at Holt Engineering on 07483025038.
Dont miss this opportunity to secure a rewarding role as a MIG Welder with a respected employer. ....Read more...
Type: Permanent Location: Ilkley,England
Start: 12/12/2025
Salary / Rate: £15 - £18 per annum
Posted: 2025-12-12 09:46:04
-
Title: Service Engineer – Marine Propulsion
Reference: 1420/22
Sector: Power & Propulsion
Type: Permanent
Location: Workshop / Field Service - Dependent on work.
Salary: £40,000 + £5,000 Car Allowance
HSB Technical’s Power & Propulsion team is seeking multiple Service Engineers to support a range of leading businesses across the UK, Europe, Middle East, and Africa (EMEA).
This is an exciting opportunity to work on state-of-the-art waterjet systems for a key OEM in the marine industry, supporting major MOD clients’ vessels, including:
Coastguard and Police boats
Royal Navy Pacific Fleet vessels
Workboats
Fast Ferries
The role involves frequent travel, typically in 5-day assignments, with most weekends spent at home.
As a Service Engineer, you will act as the company’s on-site representative, providing hands-on support to customers, distributors, and service agents.
Key Responsibilities - Service Engineer – Marine Propulsion
As a Service Engineer, you will act as the company’s on-site representative across the EMEA region.
Your responsibilities will include:
Delivering technical support on-site and remotely, ensuring customer satisfaction and operational efficiency.
Conducting detailed inspections, producing comprehensive reports with clear recommendations.
Completing refurbishment and repair works, including mechanical and electronic systems, following customer approval.
Recommending parts replacements and associated costs, ensuring repairs are completed efficiently and to a high standard.
Performing fault finding and troubleshooting on complex propulsion and control systems.
Delivering training sessions for customers and service agents, using hands-on methods and supporting PowerPoint presentations.
Ensuring all work is performed safely, efficiently, and in compliance with company and client procedures.
Knowledge & Skills - Service Engineer – Marine Propulsion
Strong knowledge of hydraulics, pneumatics, and mechanical controls.
( Thrusters & Water Jet propulsion systems )
Ability to read and interpret mechanical, hydraulic, and electrical drawings.
Excellent report writing and communication skills.
Willingness to travel across the UK and internationally.
Qualifications - Service Engineer – Marine Propulsion
Full UK driving licence.
Valid passport.
Recognised engineering apprenticeship or equivalent qualification.
This role is advertised by HSB Technical, acting as the appointed recruitment consultancy.
Our client base is global, well-established, and respected within the Power & Propulsion sector. ....Read more...
Type: Permanent Location: East Grinstead, England
Start:
Duration:
Salary / Rate: £35000 - £40000 Per Annum £5,000 Car Allowance
Posted: 2025-12-12 09:44:07
-
Test technician with good all round precision engineering mechanical, electronic and simulation test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical and electronic / electrical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Role requirements
Electrical and/or mechanical apprenticeship ideally with ONC/HNC or other engineering qualifications.
Mechanical fitting or electrical experience.
Supporting design and development design teams with mechanical and electrical test fixtures.
Diagnosis and fault finding.
Mechanical assembly / electrical systems.
Understanding of engineering drawings, schematics and flow charts.
An eye of irregularities in data (e.g.
over temperatures, over pressures). ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £44000 Per Annum None
Posted: 2025-12-12 09:37:38
-
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with
Mechanical fitting skills practical ability with hand and power tools.
Mobile hydraulics.
Pneumatics
Pressure systems
Pressure equipment (e.g.
Accumulators/pulsation dampener)
Pressure safety equipment, e.g.
Pressure Relief Valves.
Fluid Power systems ??? Pumps, Piping, Valves.
Plant maintenance activities, installation or fault finding and repairs of equipment and services.
3D CAD
....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-12-12 09:36:34
-
The Maintenance Engineer vacancy is working with a market leading listed manufacturing business, based in the Wakefield area (Featherstone/Normanton).
The position offers excellent opportunities for both training and career development.What's in it for your as a Maintenance Engineer:
Hours of work - Days and Nights 4 on 4 off
Salary - £53,200 per annum
Location - Featherstone/Normanton
KPI Bonus of 7%
OT paid at 1.5 and 2x
Life Assurance schemes
Double figure pension match
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled maintenance engineer etc ....Read more...
Type: Permanent Location: Pontefract, England
Start: ASAP
Salary / Rate: £52500.00 - £53500.00 per annum
Posted: 2025-12-11 15:29:52
-
The Maintenance Engineer vacancy is working with a leading manufacturing company based in the Peterborough area.
The position offers excellent opportunities for both training and career development.Location: Peterborough (Commutable from Yaxley, Stamford, Whittlesey)What's in it for you as a Maintenance Engineer:
Hours of Work - Monday - Friday (6-2/2-10/10-6)
Salary - £54,000 with annual pay increases
Enhanced Holiday allowance
Overtime paid at 1.5x and 2x
Discretionary bonus scheme
Training, Career and Development opportunities
Enhanced Company pension
Employee Assistance Programme
Main Duties & Responsibilities of the Maintenance Engineer;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Keeping and implementing plant wide PPM structures ensuring H&S, quality assurance as well as liaising with Engineering Stores
Working within a small Team and along side contractors to diagnose breakdowns and Mechanical Faults across the Plant
Experience and Qualifications Required for Maintenance Engineer;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or HNC and HND - Mechanical
Time served Mechanical Engineer or Fitter
Ability to fault find, repair and provide solutions to problems
High degree of Health & Safety awareness.
....Read more...
Type: Permanent Location: Peterborough, England
Start: ASAP
Salary / Rate: Up to £55000.00 per annum
Posted: 2025-12-10 17:18:22
-
We are seeking an Electrician to lead a small team on installation projects across the UK, focusing on the M6/M1 corridors (from Liverpool down through the Midlands to the Luton area).Start Date: 5th of January 2026 Rate: £21 per hour PAYE (Higher rate available for Supervisor positions). Hours: 8-10 hours paid daily (07:30 to 16:30/17:00). Contract: Permanent / Long-term (Full-time) Duties:
Installation work, often leading a small team and reporting directly to the Supervisor.
Projects require extensive travel through the Midlands, up to Liverpool, and down to Luton/East area.
Overtime Structure:
Nights and Saturdays: Paid at 1.5x.
Sundays and Weekend Nights: Paid at 2x.
Requirements:
ECS Card (essential).
PTS Card (Rail) is highly preferred due to the nature of some work.
2391 Inspection and Testing qualification is preferred.
Full Electrical Apprenticeship.
IPAF and PASMA certifications are highly preferred.
If you are an Electrician ready for a travelling, leadership role with excellent overtime rates, please contact Josh on WhatsApp 07799803257. ....Read more...
Type: Permanent Location: West Midlands, England
Start: 5th of January
Salary / Rate: Up to £21 per hour
Posted: 2025-12-10 11:37:20
-
Maintenance Technician Location: Poole
Salary: Competitive pay
Shifts: Double Days (rotating)
Holt Engineering is working with a well-established manufacturing business looking to strengthen its maintenance team with an experienced Maintenance Technician.
This is a solid opportunity for someone who takes pride in keeping CNC machinery running at its best and wants to be part of a well-organised, forward-thinking production environment.
The Role
As a Maintenance Technician, youll take ownership of keeping all plant and CNC equipment in top condition.
Youll be:
- Carrying out planned preventive maintenance (PPM) and reactive repairs.
- Diagnosing and fixing faults on CNC machinery and wider production kit.
- Supporting continuous improvement work to boost reliability and uptime.
- Getting involved in machinery upgrades and process improvements.
- Ensuring all work meets health & safety standards.
- Working closely with production teams to minimise downtime and keep output steady.
About You
To succeed as a Maintenance Technician, youll need:
- Proven hands-on experience maintaining and repairing CNC machinery essential.
- A recognised qualification in Mechanical or Electrical Engineering (Apprenticeship, NVQ, City & Guilds, or equivalent).
- Strong fault-finding ability across electrical and mechanical systems.
- Previous maintenance experience in a manufacturing or engineering environment.
- A proactive approach with solid problem-solving skills and clear communication.
- Willingness to work on a rotating Double Days shift pattern.
Whats on Offer
- Competitive pay with overtime available.
- A supportive, team-driven culture within a stable, growing company.
- Ongoing training and development to keep your skills sharp.
If youre a skilled Maintenance Technician who enjoys getting stuck into CNC machinery maintenance and wants a role with long-term stability and variety, wed like to hear from you.
Apply today or get in touch with Kate Taylor at Holt Engineering for more details. ....Read more...
Type: Permanent Location: Poole,England
Start: 10/12/2025
Salary / Rate: £1 - £100000 per annum
Posted: 2025-12-10 08:16:04
-
Our client is a leading supplier in the food industry.
With a commitment to quality and innovation, they provide products for customers across the globe.
Sustainability and responsible sourcing are at the heart of their operations, ensuring they continue to be a trusted name in the food industry.
Job Role & Key Responsibilities:
As a Multi Skilled Maintenance Engineer, you'll be responsible for ensuring the smooth operation and upkeep of mechanical systems across the site.
The role is mechanically focused but requires electrical knowledge to support diagnostics and minor repairs.
Performing proactive/reactive maintenance on mechanical machinery
Diagnosing and repairing mechanical faults (gears, motors, pneumatics, hydraulics)
Supporting electrical diagnostics (PLC systems, control circuits, motor controls)
Driving continuous improvement and supporting machinery upgrades
Minimizing downtime through close collaboration with production teams
The ideal candidate will have:
Mechanical apprenticeship and NVQ Level 3 or higher (ONC/HNC)
Experience in mechanical maintenance within FMCG or food production
Strong skills in fault diagnosis and mechanical repair
A basic understanding of electrical systems and PLC diagnostics
Knowledge of mechanical safety standards and working practices
Desirable Skills:
Experience with Root Cause Analysis (RCA)
Familiarity with continuous improvement processes
Exposure to mechanical systems such as:
Conveyor systems
Packaging lines and ovens
Mixing/blending equipment
Pneumatic and hydraulic systems
Checkweighers, metal detectors, and other QC machinery
Benefits Include:
Competitive salary
Opportunities for growth
Exposure to varied and critical production equipment
Great working culture
If you believe you are a great fit for this role, we'd love to hear from you.
Apply now! ....Read more...
Type: Permanent Location: Harlow, England
Start: ASAP
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-12-08 10:48:46
-
With 33 Holidays, a highly competitive salary of £44107 on a double shift plus life insurance, on-site gym and long term job stability are some of the perks the CNC Machinist will enjoy whilst working with this world class manufacturing business.You have the opportunity to apply for a CNC Machinist position with a company that have been established since for over 100 years and work on a global basis..For this CNC Machinist we are keen to receive applications from individuals who possess:
Formal qualifications within Mechanical Engineering or a relevant discipline (HNC, HND, BTEC/NVQ/City & Guilds Level 3, Apprenticeship etc.)
Stable work history with experience working in a heavy machining / engineering environment
Programming skills (editing OR creating from scratch) - all controls will be considers as full training will be provided
Working hours of the CNC Machinist Rotating AM & PM shifts working an average of 37 hours per week - 18% shift allowance is applicable:
AM Shift: 40 Hours per week
Monday to Friday 06:30 to 14:30
PM Shift: 34 Hours per week
Monday to Thursday 14:30 to 22:00
Friday: 14:30 to 18:30
In return, the CNC Machinist will receive:
Base Salary: £37379 (£44107.22 including 18% shift allowance)
Holiday Allowance: 33 Days
Immediate enrolment to the company pension scheme - up to 13% combined contribution
Access to the onsite canteen and gym
Permanent employment with long-term stability
To apply for this CNC Machinist role, please call Riz Haider at E3 Recruitment on 0148 645269 and/or send your CV o
Keen to speak to any of the following, CNC miller, CNC Turner, CNC Machinist, HORIZONTAL BORER, 5 XIS MILLER, Gear cutter ....Read more...
Type: Permanent Location: Bradford, England
Start: ASAP
Salary / Rate: £35000 - £450000 per annum
Posted: 2025-12-08 09:45:13
