-
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Gravesend area of Kent.
The position offers excellent opportunities for both training and career development working with a good mix of PPM and reactive taskings.What's in it for your as a Maintenance Engineer:
Hours of work - Week 1 - Monday - Friday 6am-3pm // Week 2 - Monday - Thursday 12pm -10pm
Salary - Circa £43,500 per annum
Location - Gravesend, Kent
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
This position would suit Multi-Skilled Engineer, Maintenance Engineer, Maintenance Electrician and Maintenance Fitter ....Read more...
Type: Permanent Location: Gravesend, England
Start: ASAP
Salary / Rate: Up to £43000.00 per annum
Posted: 2025-09-09 09:27:37
-
An opportunity has arisen for a qualified Electrician to join a well-regarded provider of sustainable heating solutions specialising in delivering innovative low-carbon systems to domestic properties, supporting the transition to greener energy.
As an Electrician, you will be working on domestic electrical systems, supporting the installation of renewable technologies such as air source heat pumps and solar systems.
This full-time permanent role offers a salary up to £45,000 and benefits.
You will be responsible for:
* Installing and integrating electrical systems for technologies such as solar PV, battery storage, EV charging and air source heat pumps
* Carrying out inspection, testing and certification of completed works
* Reading and updating job schedules via internal systems and completing all project-related documentation
* Liaising with end users where necessary to provide guidance and ensure satisfaction
* Ensuring compliance with relevant health & safety, environmental and electrical regulations
What we are looking for:
* Previously worked as an Electrician, Electrical Technician, Electrical Engineer, Maintenance Engineer, Electrical Installer, Service Engineer or in a similar role.
* Possess 1+ years experience.
* Experience with system controls.
* Must hold a minimum of the 18th Edition qualification.
* Competent and certified domestic electrician with strong installation experience.
* Background working in residential environments with a focus on quality and safety.
* Experience with renewable technologies such as air source heat pumps, solar PV systems, or battery storage would be preferred.
* Strong problem-solving approach with sound technical understanding.
* Full UK driving licence with willingness to travel to sites across London and nearby regions.
* Must have own hand tools (specialist equipment provided where required).
What's on offer:
* Competitive salary
* Company van and fuel card
* Full PPE and uniform provided
* Long-term opportunities within a growing and future-focused sector
This is an exciting chance to join a dynamic organisation that's shaping the future of home energy.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: London, England
Start:
Duration:
Salary / Rate: £45000 Per Annum
Posted: 2025-09-08 17:34:46
-
This Engineering Maintenance Supervisor position offers a basic salary of circa £50,000, plus company pension matched to 10% and generous holiday allowance.
Based near the area of Ossett - Wakefield, the hours of work are 8am - 5pm, Monday to Friday, DAYS ONLY.
The company is a leading international manufacturing business with a huge network of UK manufacturing plants across the country and a fantastic reputation.
They manufacturer products within a fast-paced automated environment and can offer you an array of training, development, and career progression opportunities, including upskilling and cross skilling.
What's in it for you:
Certified Training opportunities
The opportunity to obtain a position working DAYS Monday to Friday, 40 hours per week
Hours of work are 8am to 5pm
Basic salary up to £50k per annum (40 hours)
Company pension matched up to 10% by the company
Excellent employee benefits program, share option schemes, employee benefits program etc
The ability to drive plant and site improvements as part of the leadership team
Duties of Engineering Maintenance Supervisor
The development of maintenance plans and systems, driving PPMs
Undertaking improvement projects as part of the maintenance team, including CAPEX
The leadership and development of a small team of engineers who also work days Monday to Friday
Responsible for subcontractor management and safety
Responsible for identifying and eliminating recurring plant issues through engineering improvements
Hands on maintenance
Experience and Qualifications Required for Engineering Maintenance Supervisor
Engineering qualified City & Guilds, ONC, NVQ 3 or equivalent qualification in either Mechanical Engineering or Electrical Engineering
Strong Health and Safety awareness
Previous experience as a Maintenance Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Maintenance Planner, Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities
Please apply now!keywords: maintenance electrician, maintenance engineer, multi-skilled engineer, engineering maintenance supervisor, maintenance engineer team leader ....Read more...
Type: Permanent Location: Ossett, England
Start: ASAP
Salary / Rate: Up to £50000.00 per annum
Posted: 2025-09-08 15:40:36
-
Field Service Engineer
Birmingham
£32,000 - £37,000 + OEM Training + Work life balance + Appreciation + No weekend work + Door to door + Company Van + Personal Use + Fuel Card + Lunch allowance + Sick pay + Holiday + Pension + Optional Overtime + Low staff retention + Stability + Job Satisfaction
Solidify your career as a Field Service Engineer with a company that truly values its people and promotes a greater work-life balance with no weekend work! This is a rare opportunity to join a growing business that will provide original equipment manufacturer training on the job and courses so that you are able to produce a quality job and have everyday job satisfaction.
This growing company operates within the medical & patient foodservice equipment industry and is looking for a Field Service Engineer to join the team and help the company facilitate and manage their growth plans.
Benefit from working within a supportive environment where you're recognised and appreciated but also somewhere which prioritises your work-life balance — with no weekend work, accompanied by a generous package! The Role Of A Field Service Engineer Will Include:
* 70% Based PPM'S of Patient Feed Service Trolley's
* 30% Service & Repairs Of Medical Ovens And Fridges.
* Field Service Role Covering The Midlands Area The Successful Field Service Engineer Will Have: i
Please apply or call Rebecka on 07458 163046 for immediate consideration.
Keywords: field service engineer, field engineer, service engineer, mobile engineer, trainee engineer, service engineer, service technician, mobile technician, field technician, refrigeration, air conditioning, air con engineer, F gas, f-gas, gas safe, electrical, refrigeration engineer, catering engineer, field catering engineer,F gas engineer, hospital engineer, medical engineer, NHS, engineer,dental engineer,PPM Engineer, maintenance engineer,weighing equipment engineer, coffee engineer, commercial white goods engineer,dishwasher engineer, foodservice equipment engineer,Repair engineer,heated display engineer,hvac engineer,calibration engineer, comission engineer,Birmingham,Wolverhampton,Dudley,Walsall,West Bromwich,Telford,Shrewsbury,ionbrudge,Codsall,Derby,Stoke-On-Trent
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Birmingham, England
Start: asap
Duration: Perm
Salary / Rate: £33000 - £37000 per annum + Training + Stability + Work life balance
Posted: 2025-09-08 11:41:09
-
Site Energy Manager
Birmingham
- Join a global leader in sustainable solutions
- Spearhead the site's energy strategy and CO2 reduction roadmap
- Engage in innovative decarbonisation projects and novel technologies
- Represent the plant in energy forums and secure funding for net-zero objectives
The Site Energy Manager will drive all energy strategy and decarbonisation efforts.
This pivotal role offers the opportunity to make a significant impact.
The Site Energy Manager will be responsible for ensuring the safe, compliant, and efficient provision of power and steam to support the continuous operation of the plant and associated utilities.
This role encompasses leading the site's energy strategy, upholding health, safety, environmental, and legal compliance standards, and driving the Energy Reduction Plan aligned with ISO 50001.
Responsibilities
- Oversee the safe and efficient operation of power generation assets, including CHP and boilers
- Develop and execute the site's CO2 reduction roadmap, securing buy-in from the leadership team
- Manage capital planning for asset replacement and secure funding for net-zero objectives
- Optimise energy consumption and on-site generation, driving the site's Energy Reduction Plan
- Ensure compliance with national and site-wide energy schemes (UKETS, CCA, Capacity Market, EII exemptions)
- Manage R&M budgets, control operational costs, and ensure timely and accurate reporting to various agencies
- Lead and develop the Energy Team, fostering a culture of continuous improvement and knowledge sharing
Requirements
- Degree in Engineering (Chemical, Mechanical, Electrical, or Energy) or a related technical discipline
- Experience in energy management, carbon reduction projects, and power generation
- Knowledge of mechanical/electrical systems, gas and fluid systems, and biogas as a fuel
- Familiarity with end-to-end maintenance and compliance requirements of power generation
- Strong leadership, communication, and problem-solving skills
- Ability to organise self and others, influence effectively, and deliver projects from concept to commissioning
- Desirable: BOAS (Management Level), ISO 50001 Internal Auditor, APM PMQ, or CEng status
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Birmingham, England
Start: 08/09/2025
Salary / Rate: £Neg + Benefits
Posted: 2025-09-08 11:06:41
-
JOB DESCRIPTION
As our Manager of Engineering and Maintenance you are responsible to manage and coordinate the activities of mechanics, installers, and repairers by helping to install, maintain, and repair equipment, manage workers in maintenance, manage the parts replacement process, and manage the repair of industrial machinery, as well as both electrical and electronic equipment. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Responsibilities/Expectations:
Responsible for all aspects of management for the department including safety/health/environmental, quality, cost, and culture Ensure smooth operation of all equipment, machinery, and systems within the plant Support plant metric attainment and goal achievement through effective management of Maintenance/Engineering department: process engineering, maintenance mechanics, maintenance planning/scheduling, and maintenance storeroom groups in the department Direct reports include a maintenance supervisor, a night shift assistant supervisor, a maintenance planner/scheduler/storeroom supervisor, 2 Filling process engineers, and 2 milling process engineers Indirect reports include storeroom associate, buyer, and 20 mechanics In coordination with EHS Manager lead plant PSM compliance Lead capex planning and budgeting for the plant Small capex project management - on-time, on-budget, and achieve project results Interface with corporate engineering to facilitate completion of large capex projects Full participation in plant continuous improvement tier meetings Communicate with other departments in the plant on maintenance planning Oversight of facility maintenance and contracts supporting the site Lead training and career development of all department associates Keep abreast of industry trends and best practices in maintenance and engineering Comply with all regulatory requirements federal, state, and local
QUALIFICATIONS:
KNOWLEDGE
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Personnel and Human Resources - Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Transportation - Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits. Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services Clerical - Knowledge of administrative and clerical procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and other office procedures and terminology.
Skills
Coordination - Adjusting actions in relation to others' actions. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Instructing - Teaching others how to do something. Negotiation - Bringing others together and trying to reconcile differences. Time Management - Managing one's own time and the time of others. Operations Analysis - Analyzing needs and product requirements to create a design. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9.5 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-07 23:09:42
-
JOB DESCRIPTION
As our Manager of Engineering and Maintenance you are responsible to manage and coordinate the activities of mechanics, installers, and repairers by helping to install, maintain, and repair equipment, manage workers in maintenance, manage the parts replacement process, and manage the repair of industrial machinery, as well as both electrical and electronic equipment. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Responsibilities/Expectations:
Responsible for all aspects of management for the department including safety/health/environmental, quality, cost, and culture Ensure smooth operation of all equipment, machinery, and systems within the plant Support plant metric attainment and goal achievement through effective management of Maintenance/Engineering department: process engineering, maintenance mechanics, maintenance planning/scheduling, and maintenance storeroom groups in the department Direct reports include a maintenance supervisor, a night shift assistant supervisor, a maintenance planner/scheduler/storeroom supervisor, 2 Filling process engineers, and 2 milling process engineers Indirect reports include storeroom associate, buyer, and 20 mechanics In coordination with EHS Manager lead plant PSM compliance Lead capex planning and budgeting for the plant Small capex project management - on-time, on-budget, and achieve project results Interface with corporate engineering to facilitate completion of large capex projects Full participation in plant continuous improvement tier meetings Communicate with other departments in the plant on maintenance planning Oversight of facility maintenance and contracts supporting the site Lead training and career development of all department associates Keep abreast of industry trends and best practices in maintenance and engineering Comply with all regulatory requirements federal, state, and local
QUALIFICATIONS:
KNOWLEDGE
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Personnel and Human Resources - Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Transportation - Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits. Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services Clerical - Knowledge of administrative and clerical procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and other office procedures and terminology.
Skills
Coordination - Adjusting actions in relation to others' actions. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Instructing - Teaching others how to do something. Negotiation - Bringing others together and trying to reconcile differences. Time Management - Managing one's own time and the time of others. Operations Analysis - Analyzing needs and product requirements to create a design. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9.5 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-07 15:10:13
-
Auto Electrician
Location: Huddersfield/Elland (easy access from M62) Salary: £40 Overtime @1.5 after 39 hrs Hours: Monday - Friday (days) Contract: Permanent
A world-renowned multinational company is seeking an Auto Electrician to join their modern, fully equipped workshop.
You'll be working on a variety of specialist HGVs, including fire appliances and bespoke vehicles.
Duties include:
Fault diagnosis & repairs using electronic diagnostic equipment.
Vehicle servicing, maintenance and electrical repairs.
Completing all service/repair documentation accurately.
Interpreting and resolving vehicle defect reports from users.
The ideal candidate for the Auto Electrical role.
Experienced as an Auto Electrician, Vehicle Electrician, PSV/HGV Electrician, or REME Engineer.
Qualified to City & Guilds Levels 1-3 in Auto Electrical (or equivalent).
Confident with diagnostics and fault-finding on specialist vehicles.
Benefits of the Auto Electrician role:
Basic salary up to £40K
Paid overtime @1.5 after 39 hrs.
28 days holiday (incl.
stats).
6% employer / 5% employee pension scheme.
Death in Service cover (3x annual salary).
Permanent role with training and development opportunities.
Apply today or, for a confidential chat before applying for the Auto Electrician , contact Rodger Morley at E3 Recruitment. ....Read more...
Type: Permanent Location: Rochdale, England
Start: ASAP
Salary / Rate: £35000 - £400000 per annum
Posted: 2025-09-07 10:00:05
-
£46,000
Peckham
Monday to Friday 10am - 6pm then 6pm - 2am25 days HOL + BHSynergi are recruiting for an Mechanical Maintenance Engineer to join a large manufacturer in Peckham.
The successful candidate would join the Engineering Team on a Monday to Friday basis working an average of 40 hours a week.
This is a great opportunity for an Mechanical Maintenance Engineer/Fitter to work in an award-winning business with progression and training options.Company Profile:The company is one of the largest producers in Britain.
People are at the heart of the business all the way from material to the retail shelves in major suppliers.
They pride themselves on knowledge and dedicate to products of the highest quality.Mechanical Maintenance Engineer Job Description:As an Mechanical Maintenance Engineer, you will be overseeing reactive and Planned Maintenance and ensure standards are hit.
You will be diagnosing faults, identifying problems on machinery, and implementing solutions.
Repair of site machinery with electrical and mechanical multi-skilling will be required.
You will be aware of the pressures involved and have a proactive approach to electrical maintenance.Roles & Responsibilities as a Mechanical Maintenance Engineer:, Mechanical Maintenance, Preventative maintenance, Health & SafetyTo be suitable for this position, the ideal Mechanical Maintenance Engineer will have experience in the below:, A UK Recognised engineering qualification, Worked in either Food, Pharmaceutical, Automation, General FMCG£46,000Monday to Friday 10am - 6pm then 6pm - 2am25 days HOL + BH ....Read more...
Type: Permanent Location: Peckham, England
Start: ASAP
Salary / Rate: £45000 - £47000 per annum + Pension, Healthcare
Posted: 2025-09-05 15:33:59
-
Mechanical Maintenance EngineerSalary: Up to £50,000Shifts: 4 on 4 offLocation: ChessingtonSynergi are recruiting for an Mechanical Maintenance Engineer to join a large manufacturer in Leicester.
The successful candidate would join the Engineering Team on a 4 on 4 off basis working an average of 42.5 hours a week.
This is a great opportunity for an Mechanical Maintenance Engineer/Fitter to work in an award-winning business with progression and training options.Company Profile:The company is one of the largest producers in Britain.
People are at the heart of the business all the way from material to the retail shelves in major suppliers.
They pride themselves on knowledge and dedicate to products of the highest quality.Mechanical Maintenance Engineer Job Description:As an Mechanical Maintenance Engineer, you will be overseeing reactive and Planned Maintenance and ensure standards are hit.
You will be diagnosing faults, identifying problems on machinery, and implementing solutions.
Repair of site machinery with electrical and mechanical multi-skilling will be required.
You will be aware of the pressures involved and have a proactive approach to electrical maintenance.Roles & Responsibilities as a Mechanical Maintenance Engineer:, Mechanical Maintenance, Preventative maintenance, Health & SafetyTo be suitable for this position, the ideal Mechanical Maintenance Engineer will have experience in the below:, A UK Recognised engineering qualification, Worked in either Food, Pharmaceutical, Automation, General FMCGMechanical Maintenance EngineerSalary: Up to £50,000Shifts: 4 on 4 offLocation: Chessington ....Read more...
Type: Permanent Location: Chessington, England
Start: ASAP
Salary / Rate: £48000 - £50000 per annum + Pension, Healthcare
Posted: 2025-09-05 15:26:27
-
JOB DESCRIPTION
ESSENTIAL JOB FUNCTIONS:
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
The primary result expected from the Process Engineer is to control internal processes to manufacture paint and paint products by defining and analyzing the manufacturing process of both milling and filling operations for improvement in quality, safety, and efficiency, and creating, improving, and maintaining manufacturing Process Instructions (PI) and salvage/rework integration.
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following: Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Science - Using scientific rules and methods to solve problems. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. Technology Design - Generating or adapting equipment and technology to serve user needs. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Mathematics - Using mathematics to solve problems. Writing - Communicating effectively in writing as appropriate for the needs of the audience.
WORK ACTIVITIES
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems. Analyzing Data or Information - Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information. Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job. Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work. Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data. Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions. Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-05 15:10:44
-
JOB DESCRIPTION
ESSENTIAL JOB FUNCTIONS:
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
The primary result expected from the Process Engineer is to control internal processes to manufacture paint and paint products by defining and analyzing the manufacturing process of both milling and filling operations for improvement in quality, safety, and efficiency, and creating, improving, and maintaining manufacturing Process Instructions (PI) and salvage/rework integration.
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following: Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Science - Using scientific rules and methods to solve problems. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. Technology Design - Generating or adapting equipment and technology to serve user needs. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Mathematics - Using mathematics to solve problems. Writing - Communicating effectively in writing as appropriate for the needs of the audience.
WORK ACTIVITIES
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems. Analyzing Data or Information - Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information. Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job. Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work. Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data. Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions. Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-05 15:10:42
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-09-05 15:10:18
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-09-05 15:10:16
-
Field Service EngineerWiltshire£45,000 - £50,000 Basic + Overtime (OTE £60k) + Company Vehicle + Training + Equipment + ProgressionJoin a manufacturing specialist and have the opportunity to earn a terrific all-around package with a realistic earning potential of £60,000.
You'll work on varied projects within manufacturing and become a specialist in the thriving packaging industry.
This manufacturer of specialist packaging equipment to various industries are looking for a hands-on field service engineer who wants to progress, earn well, and be part of a highly skilled team in a varied role.
You will receive training to increase your skills and progress into becoming a specialist in what you do.
The role involves travelling in and around Wiltshire and the South West working on various projects.As a field service engineer your role will include:
* Field Service Engineer role covering Wiltshire and surrounding area
* Workshop / clients sites depending on the job
* Breakdowns / service / maintenance of packaging and associated kit
* Stayaways when needed The successful field service engineer will need:
* Multi-skilled (bias either way)
* Service engineer or maintenance background
* Must be comfortable travelling around the Wiltshire area and live commutable to SwindonPlease apply or call on: 02038137931 and ask for Ryan PowlettKey Words: Field Service, Mechanical, Multiskilled, Mobile, Electrical, Generator, Technician, Installation Engineer, packaging, manufacturing, production, fmcg, food, pharma, Wiltshire, Swindon.This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Wiltshire, England
Start: asap
Salary / Rate: £40000 - £50000 per annum
Posted: 2025-09-05 14:49:18
-
An established Mechanical & Electrical company based in Bexleyheath but have sites in Piccadilly is seeking an experienced Mechanical Maintenance Engineer to join their team immediately.Key Responsibilities
Provide dedicated maintenance support two days per week (Wednesday and Friday) at our prestigious client's high-end law firm offices in Piccadilly
Conduct comprehensive mechanical maintenance and repair works
Assist project management teams for three days per week on various technical projects
Contribute to project delivery and support across different work streams
Maintain high standards of professional service and workplace efficiency
Key Qualifications
Minimum 3-5 years' relevant industrial maintenance experience
Strong technical troubleshooting skills
Excellent problem-solving capabilities
Valid CSCS card or equivalent professional certification
Driving licence essential
Offer
Salary is £45,000 per annum
Temp to Perm opportunity
Flexible working arrangement
To apply, please submit your most recent CV, and we will be in touch. ....Read more...
Type: Contract Location: Bexleyheath, England
Start: ASAP
Salary / Rate: Up to £45000 per annum
Posted: 2025-09-05 14:04:30
-
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Stanford Le Hope area.
The position offers excellent opportunities for both training and career development and development.
Fully automated site working with a market leading FMCG Manufacturing company.What's in it for your as a Maintenance Engineer:
Hours of work - Days and Nights 4 on 4 off - 6am to 6pm
Salary - Circa £60,000 per annum (Including Shift Allowance)
Location - Sandford Le Hope, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc ....Read more...
Type: Permanent Location: Grays, England
Start: ASAP
Salary / Rate: Up to £59000.00 per annum
Posted: 2025-09-05 13:39:16
-
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Stanford Le Hope area.
The position offers excellent opportunities for both training and career development and development.
Fully automated site working with a market leading FMCG Manufacturing company.What's in it for your as a Maintenance Engineer:
Hours of work - Days and Nights 4 on 4 off - 6am to 6pm
Salary - Circa £60,000 per annum (Including Shift Allowance)
Location - Sandford Le Hope, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc ....Read more...
Type: Permanent Location: Basildon, England
Start: ASAP
Salary / Rate: Up to £59000.00 per annum
Posted: 2025-09-05 13:38:23
-
Trainee HVAC EngineerHigh Wycombe £30,000 - £34,000 Basic + Company Van + Overtime + Training and Development + Unlimited Progression + Established organisation + Industry Leader + Diverse Projects + Bupa Health Care + IMMEDIATE START An outstanding opportunity for a Trainee HVAC Engineer to join a leading, award-winning organisation.
You'll be working alongside a skilled team on impactful environmental projects, with continuous training and mentorship, and a structured progression plan to senior positions. Established over 50 years ago, this industry-leading company needs a Trainee HVAC Engineer Engineer to join their team in High Wycombe.
You'll be working nationwide across projects for Schools and Healthcare clients - with training and expertise provided to cultivate future leaders in the field.
Join now to accelerate your career!
As a Trainee HVAC Engineer, your role will include:
* Working across several sites, installing / maintaining HVAC equipment
* Assisting and learning from senior engineers
* Travelling to sites across the UK when needed
* Dealing with customer queries on site
The Ideal Trainee Field Service Engineer will have:
* CSCS Card (renewal optional!) & UK Drivers licence
* Good mechanical skills (hand tools, assembly)
* Commutable to High Wycombe
* Flexibility to travel and stay away when requiredIf this sounds like you - please apply or call David Blissett on 020 3813 7954Keywords: Trainee field service Engineer, Trainee HVAC Engineer, Junior engineer, HVAC, Electrical, Controls, Systems, M&E, Air conditioning, Field Service, Maintenance, Technician, Mobile, Construction, CSCS, High Wycombe, Aylesbury, slough, reading, Watford, Mobile Engineer, Ex-ForcesFuture Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: High Wycombe, England
Salary / Rate: £30000 - £340000 per annum
Posted: 2025-09-05 13:26:08
-
Maintenance EngineerLouth£35,000 - £37,000 Basic + Rotating Shifts (Days & Nights - Friday to Sunday 6am to 6pm - 6pm to 6am) + Family Run Company + Stability + BenefitsExciting opportunity for a Maintenance Engineer to work a weekend shift for a thriving manufacturing business at the forefront of the renewables industry.
You'll be working with specialist equipment and cutting-edge solutions in a role that offers variety, technical challenge, and development.
If you enjoy problem solving and want to become a true technical expert, this is the perfect next step.As Maintenance Engineer, you'll be joining a long standing, family run company that genuinely values its people and has built a reputation in the renewable and recycling sectors.
With operations across the UK and internationally, the business continues to grow, offering employees longevity, progression, and the opportunity to make a real impact.
You'll benefit from a supportive environment, ongoing training, and the opportunity to work on projects that contribute to a more sustainable future.Your Role as Maintenance Engineer:
* Maintenance Engineer - Rotating shift - days and nights (Friday to Sunday)
* Reactive and planned preventative maintenance
* Installations and equipment upgrades, fault finding and breakdowns
* Weekend Shift (Days & Nights - Friday to Sunday 6am to 6pm - 6pm to 6am rotating)The Ideal Maintenance Engineer Will Have:
* A background in maintenance
* Time served with a Manufacturing or Engineering background
* NVQ Level 3 / City & Guilds / HNC or HND in Engineering (or equivalent)
* Mechanical skills with (some Electrical)
* Able to commute reliably to Louth Apply now or call Ryan on 02038137931 for immediate consideration!Keywords: Maintenance Engineer, Multiskilled Engineer, Multskilled Maintenance Engineer, Mechanical Engineer, Electrical Engineer, Maintenance Technician, Field Service Engineer, Field Engineer, Louth, Lincolnshire, Grimsby, Lincoln, Grimsby, Lincolnshire, weekend shift.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Louth, England
Start: ASAP
Duration: PERM
Salary / Rate: £35000 - £37000 per annum + Good Benefits
Posted: 2025-09-05 10:59:59
-
Electrical Maintenance EngineerAndover£52,000+ Monday to Friday totational shifts25 days holiday + BHHealthcare
Job description:
Electrical Maintenance Engineer
Our client a leading manufacturer is looking for an Electrical Maintenance Engineer with an excellent eye for detail and a passion for quality to join their team in Andover.
They offer a competitive salary and employment benefits as well as ample opportunities to grow and develop.
Roles and responsibilities
Perform electrical, controls, and basic mechanical maintenance including planned and reactive maintenance activities, and implementing any upgrades or modifications required
Record all relevant data, including any relevant refurbishment and overhauls that are required.
Support the operations teams by developing training materials
Work alongside other teams to identify solve problems.
Continually improve equipment maintenance strategies
Analyse PLC faults and diagnose external faults using various software programs
Requirements
Apprentice-trained electrical maintenance engineer, with a /NVQ3 in electrical engineering or equivalent
Ability to work a 3-shift rotation pattern.
Minimum of 5 years' experience in manufacturing engineering, preferably in the FMCG sector.
Excellent knowledge of manufacturing engineering equipment, with experience working in production lines, warehouses and distribution centres
Strong understanding of PLC control system architecture and field control devices.
Strong MS Office skills and experience with CMMS systems.
Benefits
Salary of £52000+ per annum
Shift: The Electrical Maintenance Engineer is a Monday to Friday.
Yearly bonus based on personal and company performance.
10% Pension scheme contribution
25 days of holiday plus 8 bank holidays
Sign-on bonus.
Access to an onsite Gym and Wellbeing Centre, as well as onsite staff shop and online staff discounts.
Employee discount scheme with savings across online platforms, high street stores, cinemas, holidays, restaurants, and more.
Cycle to work scheme.
Simply Health Cash plan.
Company overview/values/ DNA
As one of the leading food manufactures in the UK our client is looking for individuals who are as passionate as they are about producing quality products.
They provide an inclusive healthy environment where people can grow and develop in a diverse environment.
If you are suitable for the Electrical Maintenance Engineer, please apply below or give us a call on 01923 227 543
Alternatively, if you know anyone suitable for this role, please could you send me their details
....Read more...
Type: Permanent Location: Andover, England
Start: ASAP
Salary / Rate: £51000 - £54000 per annum + 33 days holiday, pension, healthcare
Posted: 2025-09-05 10:12:17
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Two+ years related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-09-04 23:53:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Two+ years related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-09-04 23:51:39
-
We're looking for an experienced Maintenance Engineer to join a leading UK manufacturer on a 12-month fixed-term contract at their Cannock site.
This is an excellent opportunity for a skilled engineer to work with modern production machinery in a fast-paced environment, carrying out both preventative and reactive maintenance.
What's in it for you
£35 per hour + premium overtime rates
12-month fixed-term contract
4 on 4 off shift pattern - days and nights (6am-6pm / 6pm-6am)
Long-term contract stability with overtime opportunities
Work with a respected manufacturer investing in their site and equipment
The Role You'll be responsible for maintaining, repairing, and improving production machinery, ensuring downtime is kept to a minimum and reliability is maximised.
This includes working with hydraulics, pumps, shafts, bearings, gearboxes, and other mechanical components, as well as supporting site projects and continuous improvement initiatives.
Skills & Experience
Time-served Maintenance Engineer (NVQ Level 3, HNC, HND or equivalent)
Strong background in mechanical maintenance - hydraulics, pumps, gearboxes, shafts, bearings etc.
Multi-skilled knowledge (basic electrical fault finding) would be advantageous
Previous experience in manufacturing, heavy industry, or similar environments
Proactive approach with a strong focus on health & safety
If you're an experienced Maintenance Engineer looking for a high-paying contract role with excellent shift-based earnings, apply now to find out more. ....Read more...
Type: Permanent Location: Cannock, England
Start: ASAP
Salary / Rate: £30.00 - £35.00 per hour
Posted: 2025-09-04 17:57:18
-
OverviewLanguagesEnglishEducationCollege, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 yearsExperience2 years to less than 3 yearsOn site Work must be completed at the physical location.
There is no option to work remotely.ResponsibilitiesTasksDesign and develop power equipment and systemsInstall equipmentMaintain equipmentRead blueprints or other instructions to determine work requirementsTest power equipment and systemsAssist in inspecting, testing and adjusting electronic componentsCalibrate electronic equipment and instrumentsCollect and compile operational or experimental dataCarry out applied research in fields of electrical and electronic engineering and physicsConduct or supervise the installation, commissioning, and operation of electrical and electronic equipment and systemsSet up and operate specialized and standard test equipment to diagnose, test and analyze the performance of electrical and electronic components, assemblies and systemsComplete work orders, test and maintenance reportsAdditional informationPersonal suitabilityEfficient interpersonal skillsValues and ethicsDedication ....Read more...
Type: Contract Location: Edmonton. Canada
Posted: 2025-09-04 16:21:58
