-
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely.
Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable. ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £36000 Per Annum None
Posted: 2025-12-23 10:09:02
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2025-12-23 09:53:39
-
A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry.
The Senior Electronics Test Engineer, Essex, will take ownership of complex testing projects, applying strong analogue and digital expertise to resolve technical issues, support product development, and ensure the highest engineering standards.
You will also play a key role in developing automated test systems and mentoring junior colleagues.
Responsibilities include:
Perform in-depth testing of new and existing electronic modules to the highest standards.
Lead complex projects in collaboration with international colleagues.
Resolve advanced electronic test issues using technical knowledge and initiative.
Develop C++ software applications for engineering and production test systems.
Provide coaching, support, and technical guidance to engineers and technicians.
The Senior Electronics Test Engineer, Essex, will have the following key skills:
Bachelor's or Master's degree in Electronic or Electrical Engineering.
Proven experience in electronics testing (analogue and digital).
Strong circuit design, signal processing, and fault-finding skills.
Proficiency in C++ (or similar) for automated test systems.
Experience with oscilloscopes, digital multimeters, signal generators, and logic analysers.
APPLY NOW - Senior Electronics Test Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.com Or call Adam on 01582 878821 / 07961158768 ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-12-23 09:51:32
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:54
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:28
-
Workshop Technicians - Temp to Perm
Salary: £24K-26K Dependent on experience + Benefits
8-5 Monday to Thursday, & Friday 8 - 4.30pm, and every other Friday 12.30 pm Finish.
My client is looking for self-motivated individuals who are flexible, take pride in their work, and want to be part of a business with an exciting future.
Full training will be given.
This is a great opportunity for someone looking to join a friendly company who enjoys working with small devices, looking to learn and grow within a technical environment.
This position has huge potential for the right person.
Basic duties will include:
- Repair and servicing of electronic devices, including bar code readers, PPS (point of sale) devices, as well as monitors and computers, and chip and pin (payment) devices
- Managing spare parts usage using our IT database system
- Testing units to meet with quality control procedures
- Co-operation with logistics and production support departments
Candidate requirements:
- Broadly understood knowledge in the field of electronics, the basics of building computers and electronic devices
- Basic knowledge of computer science
- An additional advantage will be an education in electronics / electrotechnics and experience in electronics repairs and maintenance
Personal Skills
- Candidates must demonstrate an aptitude for working with small hand tools/soldering, etc.
and have an eye for detail
- Must have the ability to work to deadlines and achieve high-quality standards
- Competent with working alone on computers, including using specialist manufacturers
calibration programs (training provided)
- Knowledge of taking apart and working with computers, mobiles or electrical devices.
My client offers the opportunity to:
- Work for an established group, with a stable market position
- Raising own professional qualifications
- Internal training (inside and outside of the UK)
- An international working environment
- Friendly atmosphere
- Basic Contract to include:
, 40 hours per week
, 20 days annual leave in addition to Bank Holidays
KH Recruitment Ltd is acting as an Employment Business in relation to this vacancy. ....Read more...
Type: Contract Location: West Malling, England
Start: 30/01/2026
Salary / Rate: £24000 - £26000 per annum + + Benefits
Posted: 2025-12-22 16:04:06
-
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria.
Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2025-12-21 11:34:35
-
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems.
As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £38000 Per Annum None
Posted: 2025-12-21 11:28:30
-
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis.
You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £23000 - £34000 Per Annum None
Posted: 2025-12-21 11:23:25
-
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians.
The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £35000 Per Annum None
Posted: 2025-12-21 11:23:24
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation, and controls, to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of the organization, including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventive Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Crosstrain on other production functions to aid as business needs dictate.
EDUCATION REQUIREMENT:
High school diploma required.
One-year certificate from college, technical school, or manufacturing training program.
EXPERIENCE REQUIREMENT:
No prior experience or training.
3-5 years of experience, in lieu of a one-year certificate from college, technical school, or manufacturing training program.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift license preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Experience in 480-volt 3-phase, electricity required (Preferred in AB).
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred.
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry, and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $25 and $27.99.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-12-20 22:09:21
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation, and controls, to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of the organization, including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventive Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Crosstrain on other production functions to aid as business needs dictate.
EDUCATION REQUIREMENT:
High school diploma required.
One-year certificate from college, technical school, or manufacturing training program.
EXPERIENCE REQUIREMENT:
No prior experience or training.
3-5 years of experience, in lieu of a one-year certificate from college, technical school, or manufacturing training program.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift license preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Experience in 480-volt 3-phase, electricity required (Preferred in AB).
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred.
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry, and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $25 and $27.99.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-12-20 22:08:25
-
Test Technician - Electronics
Are you a Test Technician with hands-on experience testing electronic or power-based systems, looking to work with high-power, cutting-edge technology?
Our client, a global leader in green energy technology, is expanding their specialist R&D and test team in Glasgow, Scotland.
This hybrid role offers strong technical exposure, long-term development, and the opportunity to support advanced battery charging and power conversion products used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Test Technician - Electronics job are:
Test industrial charging systems, comparing results to given specifications.
Construct, modify and maintain test fixtures and setups, following electrical diagrams.
Setup equipment such as power supplies, oscilloscopes and data loggers.
Assembly of cables and connectors for test setups.
Prepare reports to be shared with R&D engineers and management.
Requirements for this Test Technician - Electronics job are:
Experience working with high power electrical systems.
Knowledge of product test procedures and the ability to follow instructions.
Practical knowledge of laboratory equipment such as Thermal chambers, power supplies and oscilloscopes would be ideal.
Otherwise, the potential to transfer skills from another background.
The ability to work safely with high voltages, as our current products may be powered by up to 660Vac, 3Ph, input.
Experience in industrial, defence, rail, power, or similar sectors is beneficial.
To apply for this Test Technician - Electronics role: Please send your CV to NDrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2025-12-19 13:47:11
-
Electronic Technician required for off shore Electrical and Electronic repair experience of pneumatic and hydraulic systems including:
Caterpillar
Detroit Diesel / MTU
Marine
Honeywell
or Aviation equipment
The ideal candidate will have cement pumping machinery troubleshooting and repair experience with cementing, pressure pumping equipment from: SIEMENS PLC, COMPEX certified, Halliburton, Baker, Sangel, Weatherford and/or Honeywell.
The successful candidate will be required to travel offshore as needed (c.
80%).
You will be responsible for troubleshooting, repair and maintenance of PLC, electrical, electronic, and computer-based equipment and systems located on cementing pumps and blending units. ....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £52000 Per Annum None
Posted: 2025-12-19 10:30:41
-
Electronic Technician required with off shore Electrical and Electronic repair experience of pneumatic and hydraulic systems including:
Caterpillar
Detroit Diesel / MTU
Marine
Honeywell
or Aviation equipment
The ideal candidate will have cement pumping machinery troubleshooting and repair experience with cementing, pressure pumping equipment from: SIEMENS PLC, COMPEX certified, Halliburton, Baker, Sangel, Weatherford and/or Honeywell.
The successful candidate will be required to travel offshore as needed (c.
80%).
You will be responsible for troubleshooting, repair and maintenance of PLC, electrical, electronic, and computer-based equipment and systems located on cementing pumps and blending units. ....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £40000 Per Annum None
Posted: 2025-12-19 10:29:39
-
Holt Engineering are working with an innovative manufacturing company based in Havant, who are on the lookout for an IPC technician.
A well-established company, with years of experience providing the design and manufacture of electrical and assembly products, they are based in a modern facility in Hampshire with a close-knit and friendly team right at the centre of all they do.
This role is offering a Permanent contract, working Monday to Friday with an early finish on Fridays.
Salary - £26,000 - £31,000 (Depending on Experience)
Responsibilities for the IPC Technician:
- Manufacturing PCB Assemblies
- Soldering of PCBs
- Preparing kits
- Wiring Modifications
- Cable/harness assembly
- Mechanical assembly
- Working to IPC Specifications
To be a successful IPC technician:
- ESD Awareness - Essential
- IPC 610 certified - Essential
- Ability to read from technical drawings
- Great Attention to detail
- Recognise specific components
- Self Motivated
Benefits for the successful IPC Technician:
- Early finish on Fridays
- Last Friday of every month off
- Competitive pay structure
Sound like a good fit for a IPC Technician?
Call Sam on 07485 390946 or APPLY NOW ....Read more...
Type: Permanent Location: Havant,England
Start: 19/12/2025
Salary / Rate: £26000 - £31000 per annum
Posted: 2025-12-19 10:02:04
-
Holt Engineering are working with an innovative manufacturing company based in Havant, who are on the lookout for a skilled and experienced Assembly Technician.
The successful candidate will be working with a company who have clients across the globe in a very interesting and exciting industry.
With years of experience providing the design and manufacture of electrical and assembly products, they are based in a modern facility in Hampshire and looking for a skilled Assembly Technician to join their expanding team.
This role is offering a Permanent contract, working Monday to Friday with an early finish on Fridays. Salary - £26,000 - £35,000 (Depending on Experience)
Responsibilities for the Assembly Technician:
- Manufacturing PCB Assemblies
- Preparing/checking kits
- Wiring Modifications
- Cable/harness assembly
- Mechanical assembly
- Working to ECSS Specifications
To be a successful Assembly Technician:
- ESD Awareness - Essential
- ECSS-Q-ST-70-61C Essential
- ECSS-Q-ST-70-26C Desirable
- Ability to read from technical drawings
- Carry out microscopic soldering
- Great Attention to detail
- Recognise specific components
- Disciplines of a cleanroom
- Self motivated
Benefits for the successful Assembly Technician:
- Early finish on Fridays
- Close-Knit environment
- Last Friday of every month off
- Competitive pay structure
If you have the required qualification and experience, please apply with your CV or cal Sam on 07485 390946 ....Read more...
Type: Permanent Location: Havant,England
Start: 19/12/2025
Salary / Rate: £26000 - £35000 per annum
Posted: 2025-12-19 09:59:04
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:27
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Cross-train on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT: 3+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:25
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:20
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Cross-train on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT: 3+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:49
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:28
-
MET Technician / Strip Fitter role:
- Salary of up to £55,000 per annum + Bonus (OTE Circa £80k)
- Overtime Available if desired
- 45 hours Monday - Friday (Flexible start and finish time)
- Permanent Role
Our client, a busy Accident Repair Centre in the Elstree area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £55,000 + Bonus Bodyshop Elstree
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician ....Read more...
Type: Permanent Location: Elstree,England
Start: 18/12/2025
Salary / Rate: £55000 per annum, Benefits: OTE Circa £80k
Posted: 2025-12-18 15:31:04
-
The MET Technician / Strip Fitter role:
job id: 198802
- Salary of up to £57,000 per annum + Bonus
- Monday - Friday 45 Hours per week
- Flexible start and finish times
- Permanent Role
Our client, a busy Accident Repair Centre in the Thames Ditton area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £57k Bodyshop Thames Ditton
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician ....Read more...
Type: Permanent Location: Thames Ditton,England
Start: 18/12/2025
Salary / Rate: £57000 per annum, Benefits: + Bonus
Posted: 2025-12-18 13:31:07
