-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2025-05-12 15:28:40
-
Our Client based in Birmingham is looking for 18+ Leaving Care Personal Advisor to join their team
The main purpose of the role is
To provide a statutory social work service for children in care and care leavers age 18-25 years, ensuring that all legislative requirements are met.
The work with eligible, relevant, former relevant and qualifying care leavers will be done on a case management basis.
This will involve the co-ordination, preparation and completion of pathway plans and supporting young people preparing for leaving independently into adulthood.
Your primary responsibilities will include
To act as a full member of the staff team of the Service and to contribute to the development of the Service within the Directorate.
To fully contribute to the work of the Service and to manage an individual caseload, work with individual and groups of young people and to participate in the duty work, responding to need as it arises
To participate in the provision of appropriate programmes for individual service users of the Service, in conjunction with other Directorate staff and other agencies within this field; that will most effectively assist the young people to achieve the transition to adulthood, with particular emphasis upon their transition from being in care, to living independently in the community
Within the role of aftercare adviser, to implement and adhere to all relevant Directorate and Service procedures.
Requirements
You must have an enhanced DBS
You must also have
Substantial experience of working with children and young people up to the age of 21 and 25 if they are in higher education in a voluntary or Professional setting.
Experience of interagency work with young people who are vulnerable, at risk, homeless or have been in care.
Experience of being responsible for directly assisting young people (caseload responsibility)
Have worked successfully in achieving outcomes for Young People under supervision.
To be literate and able to write emails, reports, case records and other documents using electronic case recording systems and software such as word.
Ability to advise young people around budgeting, and to be financially accountable where appropriate.
Ability to seek and secure education, training and employment opportunities for care leavers.
Ability to talk to, listen to, and develop good working relationships with young people, including those who may be difficult to engage or are challenging.
Ability to develop working relationships with family, carers, professionals & partner agencies.
(Education, training, employment, accommodation, police, probation, prison, DWP, health, etc).
To be aspirational for young people.
A friendly, sympathetic, understanding and realistic approach, to the needs of young people.
Good verbal presentation skills.
Ability to manage time and work to deadlines.
Ability to respond flexibility to changing situations.
Effective communication skills.
A commitment to anti oppressive and anti-discriminative practice.
Ability to work as part of and contribute to team working.
Pay
£18 P/H
Shift Pattern
08:45AM to 5:15PM
If interested please apply below
....Read more...
Type: Contract Location: Birmingham, England
Salary / Rate: Up to £18 per hour
Posted: 2025-05-12 12:39:47
-
The Company:
Leading manufacturer of precision engineering components used in the life science sector.
Global presence.
Market leader in providing fluid handling solutions to the life science and pharmaceutical sectors.
Fantastic career prospects with structured training and development program.
Market leading brand within the Automation, Pneumatics and Control Industries.
Fantastic products.
The Role of the Sales Engineer – Life Science
Field based applications role involved in commissioning and specification of products used in the life science sector for fluid handling applications.
Typical products are Thermo Controllers, chiller technology, gas control, analysers, valves and lots more!
There will be joint visits with the sales team as well as individual visits.
Will be doing product demo's, workshops, show stands etc...
Working on complex systems with their products integrated.
Focussing on life science, pharmaceutical and semi-conductor markets.
Ideally based centrally in the UK.
Benefits of the Sales Engineer – Life Science
£50k-£60k basic salary (Neg)
Bonus circa 1 months salary
Exec Car
Pension
Healthcare
Life assurance
Laptop
Mobile
25 Days annual leave + Bank holidays
The Ideal Person for the Sales Engineer – Life Science
Commercial awareness and ideally be able to spot additional opportunities and make appointments.
Strong knowledge of the Life Tech / Life Science / Electronics sectors
A background in process instrumentation sales.
Possibly an Applications Engineer, Projects/Design but moved into something with a commercial/sales slant.
Someone who can take a system that someone else has designed and integrate their products into the whole machine.
Apprenticeship, HNC+ or Degree preferred though time served considered in Mechatronics, Electrical, Electronic or possibly Mechanical if they understand sizing.
If you think the role of Sales Engineer – Life Science is for you, apply now!
Consultant: Darren Wrigley
Email: darrenw@otrsales.co.uk
Tel no.
020 8397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Swindon, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £50000 - £60000 Per Annum Excellent Benefits
Posted: 2025-05-12 12:00:59
-
An opportunity has arisen for a Senior Legal Cashier to join a well-regarded law firm.
This role offers a competitive salary and benefits.
As a Senior Legal Cashier, you will be supporting a busy finance function by managing all legal cashiering duties in line with regulatory standards.
You will be responsible for:
* Processing daily incoming post and directing correspondence to appropriate teams
* Downloading bank statements and conducting daily reconciliations across client and office accounts
* Monitoring and managing the banking system for electronic payments (e.g.
CHAPS, BACS)
* Posting and allocating receipts, including manual and electronic transactions
* Preparing and completing client-to-office transfers for disbursements and fees
* Handling cheque requests, card payments and foreign transactions in accordance with firm policy
* Issuing client and business cheques for approval and signature
* Assisting with completion statements and arranging outgoing payments
* Ensuring ledgers are accurate, balanced, and compliant with SRA rules
* Managing petty cash and ensuring accurate reconciliation
* Running daily financial reports and maintaining digital filing systems
* Ensuring all financial operations adhere strictly to legal accounting regulations
What we are looking for:
* Previously worked for 2 years as a Legal Cashier or in a similar role.
* A solid understanding of the Solicitors Accounts Rules and compliance frameworks
* Skilled in Microsoft Excel and Word
* A confident telephone manner and the ability to liaise across departments
* Working knowledge of legal accounting software such as Partner for Windows
* Educated to GCSE level or equivalent
This is a fantastic opportunity for an experienced Legal Cashier to join a respected legal practice and contribute to a thriving accounts function.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Battle, England
Start:
Duration:
Salary / Rate: £25000 - £45000 Per Annum
Posted: 2025-05-12 11:53:11
-
Electronics Engineer Consultant - Security Clearance - Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company.
You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies.
Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies.
Due to this, I'm expecting a lot of interest in this role.
If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications.
Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:32:03
-
Senior Mechanical Engineer - Biotech Mechatronics - Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD.
Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows.
Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it's like to wear multiple hats when needed.
Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives.
I can provide more details once you have made an application.
Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I'm expecting a lot of interest in the role.
So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: bonus, enhanced pension
Posted: 2025-05-12 09:31:08
-
Medical Devices Consultant - Senior Mechanical Engineer - Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role.
The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology.
Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties.
Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices.
Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required.
However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector.
Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly.
The organisation is open to candidates with varying levels of experience.
If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:29:51
-
Principal Mechanical Design Engineer - Medical Devices - Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists.
Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career.
In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills.
Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:29:18
-
Embedded Software Engineer - Security Clearance - Cambridge
A growing spinout security technology company, based in Cambridge, is currently seeking an experienced Embedded Software Engineer to assist with the development, modification, and enhancement of various security technologies.
Your focus will span across radio, satellite, communications, radar, sensors, and other complex technologies used in the defence, aerospace, telecommunications, and other cutting-edge sectors, where you will contribute to the development of new technologies.
You will collaborate with a team of experts, including electronics design engineers, software engineers, mechanical engineers, physicists, and other specialists.
You won't necessarily need prior experience in the specific sector, as this is trainable, but you should have substantial experience in developing embedded systems using C/C++ programming languages.
This company provides bespoke products and services for clients, ensuring that your projects will always be unique, presenting their own set of problems and challenges to keep you engaged.
In addition to client projects, you will be involved in developing new versions of existing technology and improving current versions, offering a diverse and engaging role that will keep you interested for the long term.
While experience in telecommunications, aerospace, scientific, radar, radio, or other complex technologies that involve communication between devices would be ideal, it is not essential.
Your experience as an Embedded Software Engineer is more crucial than the specific sector.
Certain roles may require security clearance, typically necessitating a British passport with no criminal record or a history of residing in the UK and paying taxes for several years (also with no criminal record).
This role has arisen due to the company's growth.
They take pride in investing in their staff by providing continuous training to support your career development.
They have received awards for their commitment to staff development.
In addition to award-winning training, career growth, and varied and unique work, you will receive a competitive starting salary, bonuses, pension contributions, medical insurance, life assurance, free parking, and other excellent benefits.
There are currently several openings for Embedded Software Engineers within the company, so they will consider candidates with different levels of experience, from those early in their careers to senior candidates with years of experience.
Salary will be determined based on experience, and there may be new roles approved in the future.
If you are interested, we recommend submitting your application now to avoid missing out.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:28:06
-
Embedded Software Consultant - Defence - Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C.
Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors.
It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles.
The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company's natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you.
Please note we will not be able to discuss the role specifics until we have a copy of your CV. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:25:45
-
Firmware Engineer - Electronics Hardware Integration - Defence - Cambridge
We have an important Firmware Engineer role for a growing Defence Sector organisation, aimed at contributing to the development of new technologies that will enhance the defence of the UK and other allied nations, with a focus on defensive technologies rather than offensive.
Ideally, we are looking for someone with an electronics engineering background who can leverage their Firmware Engineering experience along with knowledge of electronics hardware integration.
It's preferable if you have a proven track record of successfully completing complex projects resulting in launched devices.
Some of the project you will be involved in will be focus on the advancing new technologies, pushing boundaries, and doing things that no one has done before.
This means you won't get bored in this role and will continue to develop your careers and skills.
While prior experience in the Defence sector is ideal, we are open to consider candidates from other complex fields.
You will need to hold a degree in a software or electronics field that led you into a Firmware Engineer career.
Given the nature of this role in the Defence sector, it will be essential for you to be able to obtain security clearance.
In addition to career development and interesting projects, you will also receive an excellent starting salary (dependant on experience level), bonuses, a pension, free lunches, healthcare, on site gym access and other excellent benefits typically associated with larger organisations.
Collaboration is the key focus within this company, operating within a flat structure where peers help develop your knowledge as you contribute to theirs, all while working on some of the most fascinating projects you can imagine.
If this sounds like the kind of work you want to be involved in, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Please note that we will not be able to discuss the role specifics until we have a copy of your CV. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-05-12 09:24:39
-
Principal Electromechanical Hardware Design Engineer - Medical Devices - Oxford
A growing and well-funded scale-up Medical Devices company, based in Oxford, is currently hiring a Senior or Principal Electromechanical Hardware Design Engineer.
You will help with the development of a new and exciting Medical Devices that will continue to push the sector forward.
Main focuses in this role will be leading the design and development of complex electronic circuits, specifically to Medical Devices standards, including ISO 13485 and IEC 60601.
You'll be working on the hardware design and electronics design of Medical Devices.
This work will also include testing and validation of the completed Medical Devices, this will include developing and running testing rigs to make sure the Medical Device is safe for use on humans.
Another important part of the role will be working alongside the manufacturing and process engineering teams to make sure the transition from development to production is as smooth as possible.
We need principal and senior-level candidate, someone who has worked on Medical Devices for several years, while also mentoring and developing junior engineers.
This is a growing company, who have secured funding for a number of years, including funding for ambitious growth plans.
This means career development is possible for the right person.
Consequently, it would be ideal if you have previously worked for a start-up/scale-up Medical Devices company and know what it's like to wear multiple hats when needed.
The technology you will be working on will save lives.
I can provide more details once you have made an application.
Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Electronics Engineering, Biomedical Engineering, Mechanical Engineering, or another relevant scientific subject that led you into a Systems Engineer role.
You will also be rewarded with an excellent starting salary, pension, life assurance, private medical, income protection, equity scheme, and other benefits, plus future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a scale-up company at the beginning of their journey, I'm expecting a lot of interest in the role.
So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Oxford, England
Salary / Rate: bonus, pension, income protection
Posted: 2025-05-12 09:24:03
-
Join a Leading Electrical & PCB Manufacturing Team!
Are you an experienced PCB Wiring Technician looking for a role that offers variety, technical challenge, and career growth?
Do you have skills in wiring looms, PCB assembly, and soldering to IPC standards?
If so, this is a fantastic opportunity to work with a reputable company known for delivering high-quality solutions across the marine, defence, and industrial sectors.
This role is ideal for a motivated and detail-oriented professional who thrives in precision-based electrical assembly environments.
Youll work on cutting-edge projects, assembling and wiring electronic components while ensuring the highest quality standards.
What Youll Be Doing as a PCB Wiring Technician:
Wiring & Assembly
- Build and assemble wiring looms and electrical assemblies following IPC-A-620 standards.
- Work from technical engineering drawings and wiring schedules to complete accurate assemblies.
- Solder PCB components using surface-mount and through-hole techniques to IPC-610 & J-STD-001 standards.
Quality & Testing
- Conduct inspection and rework of PCBs to ensure compliance with specifications.
- Apply conformal coatings and use programmers such as Dataman & Phyton.
- Complete required documentation to maintain full traceability.
Continuous Improvement & Training
- Assist in the training and mentoring of new employees.
- Stay up to date with technical training, including IPC certifications.
- Contribute to maintaining a clean, safe, and efficient workspace.
What Were Looking For in a PCB Wiring Technician:
- Experience in wiring, soldering, and PCB assembly (ideally to IPC & J-STD standards).
- Ability to read and interpret technical drawings and wiring schedules.
- Strong attention to detail with a quality-driven approach.
- Ability to work independently and as part of a team in a fast-paced environment.
- A proactive mindset with a willingness to learn and undertake further training.
Whats in It for You?
Competitive Salary Get rewarded for your skills and experience.
Career Growth & Training Gain IPC-A-610, IPC-A-620 & J-STD-001 certifications.
Flexible Working Hours Achieve work-life balance with Monday-Friday shifts.
Comprehensive Benefits Package:
- 25 days annual leave + bank holidays (with additional days based on service).
- Holiday buy/sell scheme for added flexibility.
- 5% employer pension contributions to secure your future.
- Eyecare vouchers for free eye tests and discounted eyewear.
- Life insurance (4x salary) for peace of mind.
- Employee discounts on various products and services.
- Cycle-to-work scheme for eco-friendly commuting.
- Tech scheme spread the cost of electronics and home appliances.
- Recognition awards & long-service bonuses to celebrate your contributions.
- Christmas shutdown to enjoy the festive season with loved ones.
- Regular social events including summer parties, raffles, and charity fundraisers.
- On-site parking & free refreshments tea, coffee, and fresh fruit available daily.
Apply Today! If you have wiring, soldering, and PCB assembly experience, we want to hear from you!
Call Ian at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: Poole,England
Start: 12/05/2025
Salary / Rate: £32760 per annum
Posted: 2025-05-12 09:03:03
-
An exciting opportunity has arisen for a Field Service Engineer to join a growing team, providing maintenance, installation, and technical support for essential healthcare equipment across care homes, hospitals, and hospices.
This role is ideal for someone with experience in electrical fault-finding, mechanical repairs, plumbing, and electronic control systems.
You will be responsible for installing, servicing, and troubleshooting a range of capital equipment while ensuring the highest standards of safety and compliance.
Key Responsibilities For a field Service Engineer:
- Maintenance & Repairs
- Perform preventative maintenance, fault diagnosis, and breakdown cover on customer sites.
- Compliance & Quality Assurance Ensure servicing meets EN/HTM standards and participate in ISO compliance procedures.
- Customer Service & Relationship Management Build strong relationships with clients while maintaining a professional and safety-conscious approach.
- Technical Reporting & Feedback Use an electronic task management system to report on job progress and identify commercial opportunities.
- Installation & Commissioning Install and commission washer disinfectors, macerators, and stainless-steel fixtures requiring water and waste services.
What Were Looking For in a Field Service Engineer:
Experience & Skills:
- Proven experience in electrical fault-finding, mechanical repairs, and plumbing installations.
- Strong knowledge of electro-mechanical systems.
- National Certificate, City & Guilds, or equivalent technical qualification.
- Qualifications in HTM 2010 and HTM 2030 are desirable.
- Strong problem-solving skills and ability to work independently.
- Full UK driving licence required.
Personal Attributes for a Field Service Engineer:
- Excellent communication skills, both written and verbal.
- Ability to prioritise workload and work efficiently under pressure.
- Willingness to travel within the UK and occasionally stay overnight when required.
- Comfortable working in healthcare environments and handling waste products.
Whats in It for You?
Company Van & Tools Provided Fully equipped for field-based work.
- 25 Days Annual Leave Increasing with service milestones, plus public holidays.
- Private Medical Insurance Including health cashback plans and discounted gym membership.
- Life Assurance 4x base salary.
- Overtime & On-Call Allowance Extra earning potential.
- Drink & Meal Allowance While working in the field.
- Commission & Bonus Scheme Based on company performance.
- Employee Assistance Program Support for mental health and wellbeing
- Cycle to Work Scheme, Free Flu Jabs & Paid Volunteer Time.
Apply Today!
If youre an experienced Field Service Engineer looking for a role with career progression, excellent benefits, and hands-on technical challenges, we want to hear from you!
Click Apply Now or contact Ian Broadhurst at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: Bristol,England
Start: 12/05/2025
Salary / Rate: £28000 - £30000 per annum
Posted: 2025-05-12 09:01:04
-
Join a Leading Electrical & PCB Manufacturing Team!
Are you an experienced PCB Wiring Technician looking for a role that offers variety, technical challenge, and career growth?
Do you have skills in wiring looms, PCB assembly, and soldering to IPC standards?
If so, this is a fantastic opportunity to work with a reputable company known for delivering high-quality solutions across the marine, defence, and industrial sectors.
This role is ideal for a motivated and detail-oriented professional who thrives in precision-based electrical assembly environments.
Youll work on cutting-edge projects, assembling and wiring electronic components while ensuring the highest quality standards.
What Youll Be Doing as a PCB Wiring Technician:
Wiring & Assembly
- Build and assemble wiring looms and electrical assemblies following IPC-A-620 standards.
- Work from technical engineering drawings and wiring schedules to complete accurate assemblies.
- Solder PCB components using surface-mount and through-hole techniques to IPC-610 & J-STD-001 standards.
Quality & Testing
- Conduct inspection and rework of PCBs to ensure compliance with specifications.
- Apply conformal coatings and use programmers such as Dataman & Phyton.
- Complete required documentation to maintain full traceability.
Continuous Improvement & Training
- Assist in the training and mentoring of new employees.
- Stay up to date with technical training, including IPC certifications.
- Contribute to maintaining a clean, safe, and efficient workspace.
What Were Looking For in a PCB Wiring Technician:
- Experience in wiring, soldering, and PCB assembly (ideally to IPC & J-STD standards).
- Ability to read and interpret technical drawings and wiring schedules.
- Strong attention to detail with a quality-driven approach.
- Ability to work independently and as part of a team in a fast-paced environment.
- A proactive mindset with a willingness to learn and undertake further training.
Whats in It for You?
Competitive Salary Get rewarded for your skills and experience.
Career Growth & Training Gain IPC-A-610, IPC-A-620 & J-STD-001 certifications.
Flexible Working Hours Achieve work-life balance with Monday-Friday shifts.
Comprehensive Benefits Package:
- 25 days annual leave + bank holidays (with additional days based on service).
- Holiday buy/sell scheme for added flexibility.
- 5% employer pension contributions to secure your future.
- Eyecare vouchers for free eye tests and discounted eyewear.
- Life insurance (4x salary) for peace of mind.
- Employee discounts on various products and services.
- Cycle-to-work scheme for eco-friendly commuting.
- Tech scheme spread the cost of electronics and home appliances.
- Recognition awards & long-service bonuses to celebrate your contributions.
- Christmas shutdown to enjoy the festive season with loved ones.
- Regular social events including summer parties, raffles, and charity fundraisers.
- On-site parking & free refreshments tea, coffee, and fresh fruit available daily.
Apply Today! If you have wiring, soldering, and PCB assembly experience, we want to hear from you!
Call Ian at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: Poole,England
Start: 12/05/2025
Salary / Rate: £28000 - £30400 per annum
Posted: 2025-05-12 08:55:08
-
I am proud to be partnering with Trident Maritime Systems, a world-renowned leader in maritime engineering and technology in the defence sector, to recruit top talent for their growing team.
This is a fantastic opportunity to join an innovative and globally respected brand that delivers cutting-edge solutions across the maritime sector.
This exclusive partnership means we are your direct gateway to the best career opportunities within their organisation.
I am seeking skilled and motivated Electronic Test Technicians and Survey Repair Engineers.
These roles involves testing, inspecting, diagnosing, and repairing products to ensure functionality and quality standards.
You will contribute to maintaining high performance across manufacturing and engineering processes while adhering to company health and safety policies.
Key Responsibilities for an Electronic Test Technician and Electronic Repair Technician:
- Perform testing and inspection of manufactured and purchased products using relevant specifications and equipment.
- Diagnose faults and repair units, including wiring, card changes, and component-level replacements and PCB Repairs.
- Conduct surveys to assess product conditions and identify issues.
- Write detailed reports on test results, failures, and defective components.
- Provide support for prototype equipment, offering specialist advice on testing requirements.
- Maintain and improve test equipment and manufacturing processes.
- Work collaboratively to ensure deadlines and customer requirements are met.
- Follow health and safety guidelines and contribute to continuous improvement efforts.
Qualifications and Skills for an Electronic Test Technician and Electronic Repair Technician:
Essential:
- Level 3 qualification in Electrical and Electronics or equivalent experience.
- Strong understanding of electrical/electronic test practices.
- Ability to read circuit diagrams and fault-find to component level.
- Knowledge of electrical/electronic test equipment (such as Oscilloscopes, signal Generators and spectrum Analysers) and ESD procedures.
- Proficient in Microsoft Word, Excel, and programming.
Desirable:
- Experience in IPC 620 and 610 standards for repair.
- Effective communication skills, both written and verbal.
- Confident problem solver with the ability to meet tight deadlines.
- Self-motivated, team player, with a "can-do" attitude.
What Trident Offer
- Competitive salary based on experience.
- 25 days holiday plus bank holidays.
Option to buy or sell holiday
- Enhanced pension scheme.
- Cycle-to-work scheme.
- Christmas shutdown.
- Eyecare vouchers.
- Help at Hand Employee Support Programme including online GP appointments
- Refer-a-friend rewards scheme.
- Opportunities for professional growth and training
- Free refreshments on site
- Free car parking
Based in the heart of Poole Dorset you are only minutes away from 7 miles of award winning blue flag beaches, beautiful forests and great transport links to the South East and South West.
This really is a great place to live and work.
Relocation support will be considered for this role.
Holt Engineering is managing all hiring for these exciting roles.
If you are an agency and wish to partner with us on these opportunities, please reach out to discuss how to Join The Process.
As the role is for a defence sector business you will need to have lived in the UK for 5 years and be able to get clearance or be a UK national.
Apply Today!
If you have the required skills and experience for this role, we would love to hear from you.
Apply now or contact Ian at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: United Kingdom,United Kingdom
Start: 12/05/2025
Salary / Rate: £1 - £100000 per annum
Posted: 2025-05-12 08:54:04
-
An exciting opportunity has arisen for a SHE Manager to join a globally recognised organisation, whose solutions are a key part of many industries, including electronics, medical research, renewable energy plus more.
This job will be based at their site in Eastbourne.
The SHE Manager serves as the lead role in the Safety, Health, Environmental and Quality culture including creating strategies for these key areas, as well as leading the team to comply to necessary standards.
Duties of the SHE Manager job based in Eastbourne include:
Planning and overseeing the work of the SHE Team.
Drive the Safety, Health, Environmental and Quality functions of the business to yield solid results.
Ensuring adherence to ISO standards and regulations.
Support General Manager and Executive Management Team in making effective business decisions.
Key skills and experience for the SHE Manager job based in Eastbourne are:
Masters or bachelor's degree in Business, Operational Health, Industrial Hygiene, or related field.
Extensive experience as a safety, occupational health, environmental and/or quality assurance professional.
Knowledge and experience with ISO standards.
Experience within a engineering/electronics environment.
IOSH Managing Safely or NEBOSH would be advantageous.
This is an exciting job opportunity for a Safety, Health, Environmental specialist to join a fast growing, exciting company based in Eastbourne.
To apply for the SHE Manager job based in Eastbourne please send your CV and covering letter to Ricky Wilcocks, rwilcocks@redlinegroup.Com or call 01582 87 8810 or 07931 788834. ....Read more...
Type: Permanent Location: Eastbourne, England
Start: ASAP
Salary / Rate: £40000 - £60000 per annum
Posted: 2025-05-10 00:00:11
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman.
Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Aberdeen, Maryland
Posted: 2025-05-09 15:10:48
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman.
Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Laurel, Maryland
Posted: 2025-05-09 15:10:43
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman.
Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Aberdeen, Maryland
Posted: 2025-05-09 15:10:13
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman.
Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Laurel, Maryland
Posted: 2025-05-09 15:10:04
-
RF Validation Engineer - MmWave - Semiconductor
Location: Shepton Mallet, Somerset
Company: Join a world-class semiconductor team working on cutting-edge RF and mmWave technologies.
This is a great opportunity to support the development and validation of high-frequency devices in a fast-paced, customer-focused engineering environment.
You will play a key role in validating RF, microwave, and mmWave components up to 50GHz, while contributing to the success of a broad product portfolio including analogue and digital systems.
Key Responsibilities for this RF Validation Engineer job, based in Shepton Mallet:
Support engineering teams in validating advanced RF and mmWave devices.
Perform RF measurements and characterisation using VNAs, spectrum analyzers, and other lab equipment.
Design and optimise matching networks; analyse parameters such as S11, P1dB, IP3, and noise figure.
Review schematics, datasheets, and customer designs to support integration and performance analysis.
Document validation results and contribute to technical support materials, including application notes.
Qualifications and Skills required for this RF Validation Engineer job, based in Shepton Mallet:
Degree in Electronics, RF Engineering, or a related field, with hands-on RF lab experience.
Proficient in RF testing and familiar with tools such as VNAs, signal generators, and power meters.
Understanding of RF building blocks and system-level concepts, including filters, mixers, and amplifiers.
Strong communication skills and the ability to work across teams to resolve technical challenges.
How to Apply:
If you're ready to shape the future of wireless communication and work with advanced mmWave technologies, please submit your CV and cover letter to ndrain@redlinegroup.Com or call Nick on 01582 878828 / 07487 756328! ....Read more...
Type: Permanent Location: Somerset, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2025-05-09 14:39:20
-
Holt Engineering is looking for an Electronic Inspector for an established electronics manufacturing business in Havant!
The Electronic Inspector is a key part of the operations structure, acting as key support for the Quality Controller & is expected to operate within the framework of objectives and targets determined by the Management but with the latitude to pursue initiatives that will enable the department targets to be achieved.
Key Responsibilities for the Electronic Inspector:
- Final Inspection of PCBs, Electrical & Electronic Assemblies.
- Assist in the resolution of quality-related problems.
- To work with the Quality Controller to develop, improve & maintain quality standards across the areas of responsibility.
- To work with the Quality Controller to ensure that the key performance targets of quality, productivity, on-time delivery are met.
- Provide QA support as necessary.
- To assist the Quality Controller in the diagnosis of quality problems.
For an Electronic Inspector role we will require:
- Excellent communicator, written and verbal.
- Analytical
- Must be able to work under own initiative to solve problems.
- Motivated
- Good time management skills.
- Calm and collected with the ability to work under extreme pressure.
- Structured and logical approach to problem-solving.
- Knowledge of Quality management system procedures within manufacturing
- ESA & IPC manufacturing experience
- Understanding of complex engineering drawings & instructions
This is a full time position working 7:30am - 4:00pm Monday to Friday, with an early finish on Fridays, offering an Immediate start.
Sounds like a good fit? Please call Sam on 07485 390946 or APPLY NOW with this advert! ....Read more...
Type: Permanent Location: Havant,England
Start: 09/05/2025
Salary / Rate: £13 - £15 per hour
Posted: 2025-05-09 11:52:06
-
Are you an experienced assembler looking for a new opportunity?
Holt Engineering is currently working with an innovative manufacturing company based in Portsmouth, which is on the lookout for a PCB Assembler.
As a PCB Assembler, you will be supporting the production team with the assembly work flow this could include, masking, PCB assembly, conformal coating, and more.
If youre looking to secure a PCB Assembler position with a steadily growing business, then this job is for you!
To be successful in these PCB Assembler roles you must:
- Have experience working within electronics
- Soldering experience
- Previous experience working with PCBs
- Have good attention to detail and be able to work to tight deadlines
- Be able to work from drawings and part lists
For the successful PCB Assembler you will:
- Get a competitive pay structure
- Free parking
- Friendly work environment.
The role will be day shift work.
Paying between £12.21-£13.00ph depending on experience.
Sound like a good fit? Great, then we would love to hear from you!
Contact Sam at Holt Engineering on 07485 390946 or apply now for this advert.
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated ....Read more...
Type: Permanent Location: Portsmouth,England
Start: 09/05/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £13 per hour
Posted: 2025-05-09 11:50:12
-
Holt Engineering is looking for a PCB Inspector for a growing manufacturing business in Fareham!
As a PCB Inspector you will play a pivotal role within the business, you will be working within goods in, stage and final inspection of electrical & electronic assemblies.
This role is temporary to permanent and paying £12.21-£14ph DOE.
Working hours are Monday to Thursday 7:30-16:30 and Friday 7:30 to 12:30.
Key Responsibilities for PCB Inspector
- Inspection of Electrical & Electronic Assemblies.
- Calibrated Tool control issuing & approval.
- Assist with First Article Inspection
- Assist in the resolution of quality-related problems.
- To work with the Quality Controller to develop, improve & maintain quality standards across the areas of responsibility.
- To work with the Quality Controller
- Proactively advise management of any issues
- Provide QA support as necessary.
- To assist the Quality Controller in the diagnosis of quality problems.
To be considered for this PCB Inspector role:
- IPC Trained would be advantageous but not essential
- Ability to read & understand complex Engineering drawings & instructions.
- Previous experience inspecting electronics is essential
- Structured and logical approach to problem-solving.
- Able to work independently as well as within a team
- Excellent communicator
- Good time management skills
Sounds like a good fit? Please call Sam on 07485 390946 or APPLY NOW for this advert! ....Read more...
Type: Contract Location: Fareham,England
Start: 09/05/2025
Duration: 12 weeks ongoing
Salary / Rate: £12.21 - £14 per hour
Posted: 2025-05-09 11:42:05
