-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2025-12-23 09:53:39
-
A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry.
The Senior Electronics Test Engineer, Essex, will take ownership of complex testing projects, applying strong analogue and digital expertise to resolve technical issues, support product development, and ensure the highest engineering standards.
You will also play a key role in developing automated test systems and mentoring junior colleagues.
Responsibilities include:
Perform in-depth testing of new and existing electronic modules to the highest standards.
Lead complex projects in collaboration with international colleagues.
Resolve advanced electronic test issues using technical knowledge and initiative.
Develop C++ software applications for engineering and production test systems.
Provide coaching, support, and technical guidance to engineers and technicians.
The Senior Electronics Test Engineer, Essex, will have the following key skills:
Bachelor's or Master's degree in Electronic or Electrical Engineering.
Proven experience in electronics testing (analogue and digital).
Strong circuit design, signal processing, and fault-finding skills.
Proficiency in C++ (or similar) for automated test systems.
Experience with oscilloscopes, digital multimeters, signal generators, and logic analysers.
APPLY NOW - Senior Electronics Test Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.com Or call Adam on 01582 878821 / 07961158768 ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-12-23 09:51:32
-
Lead Dental Engineer
Nottingham
£45,000 - £55,000 + Market Leader + Stability + Company Car/Van + Fuel Card + Medical Insurance + Pension + Immediate Start
Are you a Dental Engineer looking to join a stable and growing company? This is a fantastic opportunity to join a company offering exceptional job stability, career growth.
Work for a well established company, who pride themselves on providing a high quality service and valuing their staff for the long term.
This expanding medical equipment service company is setting the pace in the industry and consistently winning new contracts.
You'll benefit from a supportive team environment, and a role that offers great career growth.
This role is best suited for a Dental Engineer looking to accelerate their career!
Your Role As A Lead Dental Engineer Will Include:
Field Service Role - Covering a Regional Patch
Service, Maintenance & Repair of Dental Equipment
Leading a Team of Engineers
As A Lead Dental Engineer You Will Have:
Dental Engineering Background
Happy to Travel
Full Driving License
If Interested, please apply or contact Toby Cooke on 07458 163036
Keywords: Manager, Lead, Supervisor, Senior, Field Service Engineer, Mobile Technician, Service, Medical, Biomedical, Dental, X-Rays, Chairs, Decontamination, Autoclaves, Ultrasounds, Washers, Disinfectors, Birmingham, Midlands, Coventry, Walsall, Wolverhampton, Leicester
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates with a valid legal permit or right to work in the United Kingdom.
Candidates who do not have this right, or are awaiting approval, should not apply.
....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £45000.00 - £55000 per annum
Posted: 2025-12-23 09:41:12
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:54
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:28
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £14 - £20 Per Annum None
Posted: 2025-12-22 09:33:35
-
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £27000 - £40000 Per Annum None
Posted: 2025-12-22 09:29:29
-
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria.
Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2025-12-21 11:34:35
-
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems.
As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £38000 Per Annum None
Posted: 2025-12-21 11:28:30
-
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis.
You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £23000 - £34000 Per Annum None
Posted: 2025-12-21 11:23:25
-
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry.
Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects.
Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilise digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £34000 Per Annum None
Posted: 2025-12-21 11:22:22
-
Holt Engineering are working with an innovative manufacturing company based in Havant, who are on the lookout for an IPC technician.
A well-established company, with years of experience providing the design and manufacture of electrical and assembly products, they are based in a modern facility in Hampshire with a close-knit and friendly team right at the centre of all they do.
This role is offering a Permanent contract, working Monday to Friday with an early finish on Fridays.
Salary - £26,000 - £31,000 (Depending on Experience)
Responsibilities for the IPC Technician:
- Manufacturing PCB Assemblies
- Soldering of PCBs
- Preparing kits
- Wiring Modifications
- Cable/harness assembly
- Mechanical assembly
- Working to IPC Specifications
To be a successful IPC technician:
- ESD Awareness - Essential
- IPC 610 certified - Essential
- Ability to read from technical drawings
- Great Attention to detail
- Recognise specific components
- Self Motivated
Benefits for the successful IPC Technician:
- Early finish on Fridays
- Last Friday of every month off
- Competitive pay structure
Sound like a good fit for a IPC Technician?
Call Sam on 07485 390946 or APPLY NOW ....Read more...
Type: Permanent Location: Havant,England
Start: 19/12/2025
Salary / Rate: £26000 - £31000 per annum
Posted: 2025-12-19 10:02:04
-
Holt Engineering are working with an innovative manufacturing company based in Havant, who are on the lookout for a skilled and experienced Assembly Technician.
The successful candidate will be working with a company who have clients across the globe in a very interesting and exciting industry.
With years of experience providing the design and manufacture of electrical and assembly products, they are based in a modern facility in Hampshire and looking for a skilled Assembly Technician to join their expanding team.
This role is offering a Permanent contract, working Monday to Friday with an early finish on Fridays. Salary - £26,000 - £35,000 (Depending on Experience)
Responsibilities for the Assembly Technician:
- Manufacturing PCB Assemblies
- Preparing/checking kits
- Wiring Modifications
- Cable/harness assembly
- Mechanical assembly
- Working to ECSS Specifications
To be a successful Assembly Technician:
- ESD Awareness - Essential
- ECSS-Q-ST-70-61C Essential
- ECSS-Q-ST-70-26C Desirable
- Ability to read from technical drawings
- Carry out microscopic soldering
- Great Attention to detail
- Recognise specific components
- Disciplines of a cleanroom
- Self motivated
Benefits for the successful Assembly Technician:
- Early finish on Fridays
- Close-Knit environment
- Last Friday of every month off
- Competitive pay structure
If you have the required qualification and experience, please apply with your CV or cal Sam on 07485 390946 ....Read more...
Type: Permanent Location: Havant,England
Start: 19/12/2025
Salary / Rate: £26000 - £35000 per annum
Posted: 2025-12-19 09:59:04
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-18 14:08:25
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-18 14:08:21
-
Field Service Engineer
Northampton
£40,000 + £48,000 (OTE £60,000) + Training + Growing Company + No Weekends + No Call out + Progression + Van
Work for a growing company who has concrete plans to become the industry leader.
You will have the opportunity to progress your career long term to higher roles and gain responsibility and benefit from full technical training to develop your skillset and become the best at what you do.
This company operates in the fmcg sector and is rapidly growing and expanding.
In result, they are looking for an additional field service engineer to come and join the team and help contribute to their consistent workload.
Join now and secure the opportunity to earn well through overtime and progress your career with an industry leader!
Your Role As A Field Service Engineer:
* Service, repairs & PPM's of Winery, Brewery and Distillery Equipment
* Field service role covering Nationwide
* Regular Stay Aways
The Successful Field Service Engineer Will Have:
* Electro-Mechanical Engineering Background
* Full driving licence
* Happy to Travel
Please apply or contact Toby on 07458 163036 for immediate consideration.
Keywords: service engineer, field technician, mechanical, electrical, electronics, electromechanical, fmcg, packaging, mechatronics, maintenance, brewery, distillery, winery, drink dispenser, coffee, games machine, vending machine, northampton, silverstone, banbury, bedford, wellinborough, luton ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £40000.00 - £48000.00 per annum
Posted: 2025-12-18 11:59:55
-
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £17 - £20 Per Annum None
Posted: 2025-12-18 11:47:42
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities. Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods. Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring. Assist with New Employee Orientation including PSM initial training and HAZWOPER. Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation. Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary. Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling. Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions. Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's. Works with all personnel at the facility to make sure all applicable regulations related to the PSM program. Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters. Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance Maintain and update Process Safety Information (PSI), including: P&ID documentation Pressure relief device calculations Chemical hazard information Conduct and document Process Hazard Analyses (PHAs). Ensure Management of Change (MOC) procedures are properly implemented and completed. Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC). Assist in emergency shutdown procedure training and deviation correction protocols. Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described. Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge. Demonstrated organization, facilitation, communication and presentation skills. Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction. Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance. This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear. The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs. This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR. Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures. Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-17 14:13:28
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities. Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods. Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring. Assist with New Employee Orientation including PSM initial training and HAZWOPER. Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation. Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary. Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling. Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions. Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's. Works with all personnel at the facility to make sure all applicable regulations related to the PSM program. Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters. Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance Maintain and update Process Safety Information (PSI), including: P&ID documentation Pressure relief device calculations Chemical hazard information Conduct and document Process Hazard Analyses (PHAs). Ensure Management of Change (MOC) procedures are properly implemented and completed. Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC). Assist in emergency shutdown procedure training and deviation correction protocols. Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described. Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge. Demonstrated organization, facilitation, communication and presentation skills. Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction. Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance. This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear. The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs. This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR. Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures. Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-17 14:11:22
-
Field Service EngineerYeovil£32,000 - £34,000 Basic + Overtime (OTE £40,000) + Van (Personal Use) + Medical + Gym + Premier Inn Card + 25 Days Holiday + Birthday Off + Pension + Stability + Immediate Start
Are you a Field Service Engineer who wants a rewarding role? Do you want to join a well-established company that genuinely looks after its employees and offers a strong package, supportive culture, and long-term stability?
This is a fantastic chance to join a growing company as a Field Service Engineer within the healthcare sector, servicing care homes across the South West.
If you have experience in the industry then great! If not, experience with electro-mechanical equipment (medical devices, coffee machines, white goods, etc.) transfers just as well.
A role in a recession proof industry that offers real variety!
Your Job As A Field Service Engineer Will Include:
* Servicing, maintaining, and repairing healthcare equipment in care homes
* Fault finding, testing, and ensuring compliance and safety standards
* Covering the South West
* Providing excellent customer service and building strong client relationships
* Accurate completion of job notes and reports using mobile devices
As A Field Service Engineer You Will Have:
* Electro-mechanical background - medical, coffee, vending, white goods or similar all transferable
* Full clean UK driving licence (essential)
* Experience working in field service roles
* Strong fault-finding and problem-solving skills
* Excellent communication and customer service skills
* Flexible, reliable, and able to work independently
If interested please apply or contact Billy on 07458163030.Keywords: Field Service Engineer, Service Technician, Maintenance Engineer, Electrical, Mechanical, Medical Equipment, Coffee Machine, Vending Engineer, White Goods, Fault Finding, Servicing, Repairs, Installation, Customer Service, Bath, Bristol, Salisbury, Swindon
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Yeovil, England
Start: ASAP
Salary / Rate: £32000.00 - £34000.00 per annum + + OTE 40'000 + Van + Stability
Posted: 2025-12-17 09:48:58
-
Mechanical and Electrical Manufacturing Technician required to join a growing production team, supporting the build of equipment used in cutting edge marine and subsea applications.
This is a hands on role ideal for someone with strong electronics assembly and wiring experience.
Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines.
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £42000 Per Annum None
Posted: 2025-12-17 09:34:23
-
Field Service Engineer
Bath£32,000 - £34,000 Basic + Overtime (OTE £40,000) + Van (Personal Use) + Medical + Gym + Premier Inn Card + 25 Days Holiday + Birthday Off + Pension + Stability + Immediate Start
Are you a Field Service Engineer who wants a rewarding role? Do you want to join a well-established company that genuinely looks after its employees and offers a strong package, supportive culture, and long-term stability? This is a fantastic chance to join a growing company as a Field Service Engineer within the healthcare sector, servicing care homes across the South West.
If you have experience in the industry then great! If not, experience with electro-mechanical equipment (medical devices, coffee machines, white goods, etc.) transfers just as well.
A role in a recession proof industry that offers real variety!
Your Job As A Field Service Engineer Will Include:
* Servicing, maintaining, and repairing healthcare equipment in care homes
* Fault finding, testing, and ensuring compliance and safety standards
* Covering the South West
* Providing excellent customer service and building strong client relationships
* Accurate completion of job notes and reports using mobile devices
As A Field Service Engineer You Will Have:
* Electro-mechanical background - medical, coffee, vending, white goods or similar all transferable
* Full clean UK driving licence (essential)
* Experience working in field service roles
* Strong fault-finding and problem-solving skills
* Excellent communication and customer service skills
* Flexible, reliable, and able to work independently
If interested please apply and contact Billy on 07458163030.Keywords: Field Service Engineer, Service Technician, Maintenance Engineer, Electrical, Mechanical, Medical Equipment, Coffee Machine, Vending Engineer, White Goods, Fault Finding, Servicing, Repairs, Installation, Customer Service, Bath, Bristol, Salisbury, Swindon
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Bath, England
Start: ASAP
Salary / Rate: £32000.00 - £34000.00 per annum + + OTE 40'000 + Van + Stability
Posted: 2025-12-17 08:30:44
-
NDT Technician required for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff.
This employer is recognised globally for quality and innovative deliverables.The successful NDT Technician will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the NDT Technician will include:
Conduct various inspections, including Visual Inspection (VI), Magnetic Particle Inspection (MPI), Dye Penetrant Inspection (DPI), Ultrasonic Testing (UT), and Nital Etch inspection (NE) of forgings, machine components, and weldments.
Analyse inspection results, identify potential flaws, interpret standards, and document findings according to established procedures.
Raise non-conformance reports in line with the non-conformance management procedure.
Assist in resolving shop floor issues related to machining, welding, heat treatment, or metallurgical causes.
For the NDT Technician role, we are keen to receive CVs from candidates who possess:
PCN Level 2 Minimum in Visual, MPI, DPI and UT Forgings
Experienced in preparing detailed reports outlining inspections findings, Defects and Interpreting specifications and standards
Manual Handling and training experience
ISO9001:2015 Internal Auditor Trained
Salary & Benefits on offer for the successful NDT Technician:
£37379 - £44107.22
37.5 hours per week - Monday to Friday - Rotating Shifts - Morninng and afternoons
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions.
These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the NDT Technician role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.
....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum + COMPANY BENEFITS
Posted: 2025-12-16 16:46:07
-
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
Specifically to build and tests various components of a complex downhole drilling tools.
....Read more...
Type: Permanent Location: Strouod, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £36000 Per Annum None
Posted: 2025-12-16 16:26:00
-
Trainee Engineer
London
£29,000 - £32,000 Basic + Overtime (£40'000) OTE + Vehicle + Laptop + Phone + Bonuses + Travel + IMMEDIATE START
Earn in excess of £40'000 a year as a trainee engineer whilst learning and training with great products for an innovative firm offering exciting, green energy HVAC products.
You'll be working in high end buildings and Cat A fit outs in London in a role offering progression with training courses and fantastic earning potential!
If you have HVAC or similar qualifications or are starting out in your career, this company will offer training and variety from installs and commissioning working with experienced people.
As a trainee engineer you will earn well through overtime always being on offer as well as upskill with new qualifications.
Your Role As Trainee Engineer:
* Install & Commission Air Conditioning and HVAC systems
* Training and up-skilling whenever required
* Travelling across London and surrounding areas as a field service engineer with some travel nationwide
What You'll Need As A Trainee Engineer
* Experience in engineering / construction / minimum of a level 1 qualification in either discipline
* Clean driving licence and happy to travel around london, must be 21+ to be able to qualify for fleet insurance
* Commutable distance / happy to travel in and around the City of London
If this sounds like you - please apply for an immediate interview and consideration
Keywords: Trainee engineer, Electrical, Controls, Systems, M&E, Air conditioning, Field Service, Maintenance, HVAC Technician, London, Mobile Engineer, south london, croydon, kent, west london, south east london
Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: £29000.00 - £32000 per annum + OTE ( £40'000 )+Progression+Training
Posted: 2025-12-16 16:25:20
