-
Aircraft Maintenance Engineer required for the Airbus A320 aircraft.
A B1, B2 or B1/2 with A320 family experience including PW1100G engine is ideal however candidates with A320 family knowledge with V2500, CFM56 or LEAP 1A on their UKCAA licence also suitable.
You will ensure the airworthiness, safety, and performance of aircraft being responsible for maintaining tooling, equipment, and documentation, as well as overseeing aircraft and component inspections.
Key Responsibilities
Oversee maintenance tasks efficiently and ensure compliance with procedures.
Maintain valid licenses, qualifications, and training.
Support the team through briefings, safety compliance, and technical updates.
Skills
Aircraft Maintenance Engineering experience
Certified ideally B1 or B2
Airbus A320 aircraft
V2500, CFM56 or LEAP1A ....Read more...
Type: Permanent Location: Luton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £72000 Per Annum None
Posted: 2026-01-04 15:30:56
-
Assembly Fixtures and tooling Designer required for a mechanical design and production organisation.
Skills
Assembly fixture and tooling Design experience in high volume automotive manufacturing.
3D SolidWorks CAD.
GDandT.
Rubber to metal bonding knowledge.
ATF16949 or APQP.
Role
Design simple hand operating fixtures and complex automated multifunction fixtures including rubber and polymer moulds.
SolidWorks parametric modelling, assembly and 2D drawing.
Support Assembly tooling and Fixtures in production.
3D printing prototypes and low volume fixtures.
Work closely with the engineering and operations departments ensuring quality and manufacturability of design. ....Read more...
Type: Permanent Location: Coventry, England
Start: ASAP
Duration: permanent
Salary / Rate: £36000 - £48000 Per Annum None
Posted: 2026-01-04 15:19:40
-
We are looking for Tooling and Fixture Designer.
You will work closely with production engineers to design, test, and implement both simple and complex fixtures, primarily using SolidWorks.
The role demands proficiency in 3D modelling, project management, and continuous improvement, with a focus on enhancing production efficiency and quality.
Responsibilities:
Design and develop assembly fixtures and moulding tools for production lines, ensuring designs meet manufacturing requirements.
Provide technical support in fixture development, troubleshooting, and process optimization.
Use CAD and CAE tools to develop models, run simulations, and create detailed drawings.
Qualifications:
Strong expertise in SolidWorks 3D CAD software for assembly and detailed design.
At least 3 years of experience in fixture and tooling design, particularly for rubber or polymer moulding.
Knowledge of conventional and modern manufacturing methods
Proven project management skills, with the ability to manage multiple projects simultaneously.
Experience in automotive or high-volume manufacturing environments is highly desirable. ....Read more...
Type: Permanent Location: Coventry, England
Start: ASAP
Duration: permanent
Salary / Rate: £33000 - £38000 Per Annum None
Posted: 2026-01-04 15:18:38
-
Jig and Fixture Designer required for a mechanical design and production organisation.
Skills
Assembly fixture and tooling Design experience.
3D SolidWorks CAD.
GDandT & its applications.
Rubber to metal bonding knowledge.
ATF16949 or APQP.
Role
Design simple hand operating fixtures and complex automated multifunction fixtures including rubber and polymer moulds.
SolidWorks parametric modelling, assembly and 2D drawing.
Support Assembly tooling and Fixtures in production.
3D printing prototypes and low volume fixtures.
Work closely with the engineering and operations departments ensuring quality and manufacturability of design. ....Read more...
Type: Permanent Location: Coventry, England
Start: ASAP
Duration: permanent
Salary / Rate: £30000 - £38000 Per Annum None
Posted: 2026-01-04 15:15:34
-
Product Certification Engineer required to conduct electronic product approvals and functional safety certification, particularly against UL mark or underwriter laboratories certificates.
You will work as part of an existing Quality team within an electronics manufacturing organisation.
You will become the internal authority on particular approval requirements and the go to internal contact for legal requirement questions within your specific area.
Skills
Documentation, planning, structure and attention to detail.
Certification procedure intimate understanding.
Type approval and self certification knowledge.
Legal perspective knowledge of technical requirements.
Ability to communicate legal requirements and certification needs to others.
Responsibilities
Lead the certification activities, managing authority contacts for your area.
Own compliance documentation and associated tools or processes.
Stay ahead of regulations and standard evolution.
Update and train technical and engineering teams on legal requirements. ....Read more...
Type: Permanent Location: Welshpool, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £52000 Per Annum None
Posted: 2026-01-04 15:04:31
-
Be part of a leading automotive company known for developing vehicles.
We are searching for an experienced engineer to lead powertrain concept.
Essential Skills and Qualifications
Over 5 years of design experience in the automotive industry using Catia V5
Strong background in concept development and full vehicle packaging
Expertise in carbon fibre composite design powertrain layout
Solid automotive experience and understanding of industry standards
Skilled in creating detailed technical drawings including geometric tolerancing
Knowledge of mechanical design for automotive systems ( fastening, sealing, and manufacturing processes)
Familiar with DFMEA and risk management in the automotive sector ....Read more...
Type: Contract Location: Woking, England
Start: ASAP
Duration: Contract
Salary / Rate: £42000 - £55000 Per Annum None
Posted: 2026-01-04 15:02:49
-
Join a leading global company at the forefront of designing, developing, and manufacturing company.
We are seeking a detail-oriented and reliable Production Operator to support our high-tech production processes.
Key Responsibilities
Operate and monitor advanced equipment used in the production of reticles and photomasks
Ensure adherence to strict quality and safety standards throughout the manufacturing process
Collaborate with engineers and technicians to ensure smooth workflow and resolve any technical issues
Conduct regular equipment inspections and maintenance to ensure optimal performance
Handle and process delicate materials with precision
Record production data and ensure accurate documentation
Essential Skills and Qualifications
Previous experience as a production operator or technician in electronics, semiconductor, or related industries
Understanding of semiconductor or microelectronic production processes
Strong attention to detail and ability to work with high-precision equipment
Ability to follow detailed instructions and work in a cleanroom environment
Basic mechanical or engineering knowledge is a plus ....Read more...
Type: Permanent Location: Bridgend, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £38000 Per Annum None
Posted: 2026-01-04 15:00:48
-
We are seeking a highly adaptable full-stack engineer to join EMEA team, responsible for ensuring cosmetics e-commerce platform remains at the forefront of the industry.
You will enhance existing functionality while also building new cloud-native APIs and services.
Their culture is centered around agile methodologies and a leader-leader model, meaning you???ll have the chance to shape projects from start to finish.
Responsibilities
Work across different programming languages to deliver innovative solutions and solve unexpected challenges.
Spearhead cloud migration efforts, converting legacy systems into modern microservices architectures.
Ensure all code is optimized for performance, security, and scalability.
Invest time in training and certifications to stay updated with technology trends.
Design robust technical solutions that meet the needs of e-commerce platform.
Technical Requirements
Over 5 years of experience in software development, with a preference for e-commerce platforms.
Experience in Perl, PHP, JavaScript, and CSS: familiarity with Elixir is an advantage.
Knowledge of cloud-native architecture principles, DevOps, and security best practices. ....Read more...
Type: Contract Location: London, England
Start: ASAP
Duration: 6 months initially
Salary / Rate: £200 - £350 Per Annum None
Posted: 2026-01-04 14:46:29
-
Leading designer and manufacturer of advanced electronic control systems and components for the automotive industry.
We are seeking an experienced CNC Programmer.
In this role, you will be responsible for creating, modifying, and optimizing CNC programs for manufacturing processes.
Key Responsibilities
Develop and optimise CNC programs for multi-axis machines to produce high-precision components.
Collaborate with the design and engineering teams to interpret technical drawings and ensure manufacturing feasibility.
Perform tool path simulations to ensure accuracy and identify potential issues before production.
Set up and troubleshoot CNC machines, ensuring proper tooling and fixturing.
Monitor production processes to maintain quality standards and improve efficiency.
Key Requirements
Proven experience as a CNC Programmer, preferably in the automotive or ancillary industries.
Strong knowledge of CNC machine setup, tooling, and programming ( G-code, CAM software).
Proficiency in reading and interpreting technical drawings and blueprints.
Familiarity with multi-axis machining and experience with CAD/CAM software ....Read more...
Type: Permanent Location: Coventry, England
Start: ASAP
Duration: permanent
Salary / Rate: £33000 - £38000 Per Annum None
Posted: 2026-01-04 14:44:26
-
Software Test Engineer required to build and test software that is developed internally for Microsoft Windows desktop applications.
Skills
Test Automation programming and scripting for software build and test.
Software Engineering Lifecycle knowledge, test and integration particularly.
Testing software for PCs running Windows.
Writing test plans, specifications and reports.
Software installer experience, ideally build and development.
Degree in Software Development, Computer Science or equivalent.
Role
Software test and build. ....Read more...
Type: Permanent Location: Enfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £45000 Per Annum None
Posted: 2026-01-04 14:12:18
-
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components.
In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £75000 Per Annum None
Posted: 2026-01-04 14:11:15
-
We are looking for a Senior RF Antenna Design Engineer to help develop next generation of satellite communication antenna systems.
Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays.
This role focuses on designing and optimising antennas using EM simulations and prototypes.
Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable.
Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £75000 Per Annum None
Posted: 2026-01-04 14:08:13
-
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation.
The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing.
This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2026-01-04 14:06:11
-
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals.
All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D.
in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers.
....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £60000 Per Annum None
Posted: 2026-01-04 11:40:06
-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technology.
Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems ....Read more...
Type: Permanent Location: Northampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £38000 Per Annum None
Posted: 2026-01-04 11:39:05
-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Type: Permanent Location: Northampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-01-04 11:34:03
-
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Type: Permanent Location: Edenbridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £52000 Per Annum None
Posted: 2026-01-04 11:27:57
-
We are seeking a hands-on Operations Coordinator to manage and support external vehicle conversion partners delivering specialist build work for our business.
Acting as the central link between internal teams and third-party contractors, you will ensure vehicles are converted to specification, on schedule, and to the highest quality standards.
This is not a purely desk-based role.
You will use your practical knowledge of vehicle conversion, coachbuilding, or specialist vehicle manufacturing to challenge processes, support build teams on-site, and resolve issues quickly and effectively.
Key Responsibilities of the Operations Coordinator -
Third-Party Converter Management
Serve as the primary contact for external vehicle conversion partners
Support, train, and onboard converters to deliver new and existing vehicle build types
Ensure converters operate within their technical capability and production capacity
Identify, escalate, and resolve issues affecting quality, cost, or delivery timelines
Build Support & Technical Coordination
Ensure converters work from the latest build documentation, including drawings, specifications, bills of materials, and visual references
Provide technical support during builds and act as the go-to contact during and after conversions
Coordinate prototype and new build training, including on-site sessions when required
Quality Control & Compliance
Monitor build quality at third-party sites through regular checks and inspections
Coordinate formal quality reviews and follow-up visits where issues arise
Record and report vehicle damage or defects, ensuring corrective actions are implemented
Planning, Scheduling & Logistics
Work closely with internal production and scheduling teams to forecast workloads and allocate vehicles appropriately
Monitor build progress and maintain visibility of converter capacity
Coordinate supply, collection, and return of parts and consumables to support uninterrupted builds
Oversee stock control for free-issue or consignment parts held at converter sites
General Responsibilities -
Attend operational, technical, and planning meetings
Maintain accurate records and system updates relating to parts, builds, and supplier activity
Support continuous improvement across third-party conversion processes
Undertake additional reasonable duties in line with the role
What we are looking for in an Operations Coordinator -
Proven hands-on experience in vehicle conversion, coachbuilding, specialist vehicle builds, or a closely related automotive environment
Strong understanding of production processes, quality standards, and technical drawings
Confident communicator with the ability to build effective working relationships with external contractors
Highly organised, able to manage multiple builds and priorities simultaneously
Comfortable working independently while collaborating across internal departments
Strong IT skills, including Excel and standard office systems (ERP experience advantageous)
Full driving licence and willingness to travel regularly to external sites, including occasional overnight stays
Desirable
The operations coordinator will come from a background in mechanical, electrical, or engineering disciplines
Familiarity with CAD or technical drawing systems
Experience working in fast-paced, build-to-order, or project-based environments
Location: High Wycombe (office-based with occasional travel) Salary: Circa £40k (dependant on experience) Hours: 40 hours per week, Monday to Friday (8:00am - 5:00pm) Holidays: 25 days + bank holidays
For more information about the Operations Coordinator role, please contact Sophie Ranson at E3 Recruitment or hit ‘Apply' now! ....Read more...
Type: Permanent Location: High Wycombe, England
Start: ASAP
Salary / Rate: £30000.00 - £45000.00 per annum
Posted: 2026-01-04 10:00:18
-
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems. ....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £70000 Per Annum None
Posted: 2026-01-03 14:34:26
-
Embedded Software Engineer required to join a team working in Embedded C on Microcontroller Programming.
Key skills
Embedded C
Microcontrollers, ARM Cortex based ideally ST Cortex-M
Version control ideally in GIT
GCC compiler knowledge
Build understanding of CMake
Docker, GDB
Python
Linux
DevOps, Continuous Integration and automated testing experience beneficial.
Type: Permanent Location: Taunton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2026-01-03 14:21:13
-
Senior Hardware Design Engineer will support the design and implementation of hardware subsystems for advanced mobile and fixed satellite tracking antenna terminals.
Key Responsibilities
Lead complex hardware designs and manage priorities.
Architect and design terminal hardware, ensuring quality and cost goals.
Present design analyses during reviews.
Verify and test hardware in a lab setting.
Mentor junior engineers.
Requirements
6 to 10 years in hardware design and testing.
Strong PCB design skills, Altium preferred.
Experience in power supply design and compliance testing.
Knowledge of embedded systems, high-speed digital design, and interconnect technologies. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £90000 Per Annum None
Posted: 2026-01-03 14:20:11
-
JOB DESCRIPTION
We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization.
If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for.
You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies.
You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills.
Technology Knowledge:
Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc.
Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings.
Strong command on analytical methods and structure-property relationship
Expert understanding of manufacturing process and product development
Technical Leadership:
Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation
Demonstrated skillset and track record in creating an environment to scout new ideas and innovation.
Continuous learning and intimate awareness of open literature and competitive landscape
Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress.
Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership
Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community.
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc.
Energetic, Driving and Inspiring
Action oriented, perseverance and results driven
Demonstrates Courage
Leadership (technical & managerial) command skills, conflict management
Continuous learning/growth and mentorship and teaching skills
Organization Leadership:
Ability to lead and interact with cross-functional teams in a matrixed organization
Agility to respond emerging business needs - strong change of management skills
Managing high stakes and challenging situation with all levels of organizations
Using, assessing the organizational processes and developing new processes to improve efficiency and quality
Demonstrate strong career ambition - potential to become top leader.
QUALIFICATIONS:
KNOWLEDGE:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes.
At least 4 years of technical supervisory or management experience with a diverse workforce., M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave).
Rust-Oleum offers 10.5 paid holidays and 1 floating holiday per year.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-01-03 14:08:48
-
Microwave Antenna Design Engineer required to help develop next generation of satellite communication antenna systems.
Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays.
This role focuses on designing and optimising antennas using EM simulations and prototypes.
Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable.
Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities:
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements:
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £90000 Per Annum None
Posted: 2026-01-03 13:57:03
-
Intelligent Robotics Software Development Engineer required to refine industrial robot applications using Robot Operating System to make them fully autonomous.
This role is diverse and has elements of research, collaboration (commercial and academic), exploiting emerging technologies and scouting for new partners all in the interest of developing, verifying and validating new technology applications to industry and the emerging generation of intelligent robotics
Skills
Robotic manipulation, sensing, programming, ROS, C++, Python, virtual environment, augmentation, simulation or emulator development.
Robotic industry future technologies and emerging tech knowledge.
Robotics research academic institution roadmap to viable product.
RandD consortium proposals, development and successful delivery.
System engineering, testing and assembly.
Role
Delivering robotics projects exceeding agreed requirements within budget and deadline.
Identify, select and acquire robotic technical capabilities, equipment and knowledge.
Development, operation and maintenance of robotic facilities.
Engage industry stake holders identifying needs and innovating solutions. ....Read more...
Type: Permanent Location: Didcot, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2026-01-03 10:22:48
-
Are you passionate about shaping the next generation of cutting-edge robotic technologies? We are seeking a dynamic and innovative professional to join our development team.
In this role, you will drive technological advancements, foster partnerships with leading universities, and contribute to groundbreaking research and development efforts that empower the future of robotics.
Key Responsibilities
Oversee technical deliverables to ensure they exceed customer expectations, align with budgets, and meet project deadlines.
Identify and procure the tools, equipment, and technologies required to deliver exceptional solutions.
Explore new possibilities and spearhead innovative initiatives whenever opportunities arise.
Your Skills and Experience
Proficiency in robotics technologies, especially in areas such as manipulation, sensing, simulation and high-level programming (ROS, C++, Python).
An understanding of the tools and infrastructure necessary for the next wave of robotics innovation.
Experience partnering with academic institutions to research advancements and translate them into commercial opportunities.
A track record of developing robotics proposals and working in collaborative consortia settings.
Strong knowledge of system engineering principles, including testing and assembly methodologies.
Familiarity with space technologies or applying robotics in industrial environments ....Read more...
Type: Permanent Location: Didcot, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £55000 Per Annum None
Posted: 2026-01-03 10:21:46
