-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. As our Mechanic Operator you are responsible for both the maintenance and operation of filling and packaging equipment.
Additionally provide assistance and support to the Maintenance Mechanic in making repairs throughout the plant.
Here's what you can expect every day:
Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspecting drives, motors, and belts, checking fluid levels, replacing filters, or performing other maintenance actions, following checklists. Using tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install, or repair: wiring, piping, machinery, and equipment. Clean and lubricate shafts, bearings, gears, and other parts of machinery. Diagnose mechanical problems and determining how to correct them, utilizing repair manuals and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.
Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
Required Experience:
High school graduate or equivalent. 1-3 years of industrial experience. Experience with filling and packaging equipment. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Ability to read and follow standard operating procedures. Ability to do basic math and enter computer data. Ability to coordinate with the work of others and solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to lift 75 pounds. Willingness to work overtime as required.
Additional Consideration Given to Those With:
Exposure to quality programs. Paint/Coatings/chemical industry knowledge or experience. Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment. Previous experience with safety programs. Flex Schedule: 6:00 PM to 6:15 AM shift following a 3-6-3-2 rotation-3 days on, 6 days off, 3 days on, and 2 days off.
(Week 1: Mon, Tue.
Wed.
- Week 2: Wed, Thrs, Fri) - Each 12.5 hour shift includes 30 minute unpaid lunch and 3 paid breaks (15 minutes) Shift Premium = $1.25 Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-01-06 14:09:40
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. As our Mechanic Operator you are responsible for both the maintenance and operation of filling and packaging equipment.
Additionally provide assistance and support to the Maintenance Mechanic in making repairs throughout the plant.
Here's what you can expect every day:
Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspecting drives, motors, and belts, checking fluid levels, replacing filters, or performing other maintenance actions, following checklists. Using tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install, or repair: wiring, piping, machinery, and equipment. Clean and lubricate shafts, bearings, gears, and other parts of machinery. Diagnose mechanical problems and determining how to correct them, utilizing repair manuals and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.
Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
Required Experience:
High school graduate or equivalent. 1-3 years of industrial experience. Experience with filling and packaging equipment. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Ability to read and follow standard operating procedures. Ability to do basic math and enter computer data. Ability to coordinate with the work of others and solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to lift 75 pounds. Willingness to work overtime as required.
Additional Consideration Given to Those With:
Exposure to quality programs. Paint/Coatings/chemical industry knowledge or experience. Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment. Previous experience with safety programs. Flex Schedule: 6:00 PM to 6:15 AM shift following a 3-6-3-2 rotation-3 days on, 6 days off, 3 days on, and 2 days off.
(Week 1: Mon, Tue.
Wed.
- Week 2: Wed, Thrs, Fri) - Each 12.5 hour shift includes 30 minute unpaid lunch and 3 paid breaks (15 minutes) Shift Premium = $1.25 Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-01-06 14:09:37
-
Quality Engineer
Weymouth, Dorset
Quality Engineer Salary: £35k - £40k
Play a key role in driving quality, compliance, and improvement within a world-class precision manufacturer.
Were working with a highly respected aerospace engineering company based in Dorset, known for producing complex precision components and assemblies to the highest standards.
Theyre now looking for an experienced Quality Engineer to strengthen their quality department and support continuous improvement across the business.
As a Quality Engineer, youll be the go-to person for all things quality, from internal audits and customer reviews to supporting MRB, RCCA, and process improvement initiatives.
Youll work closely with the Quality Manager, customers, and production teams to ensure everything leaving the site meets both AS9100 requirements and customer expectations.
Day-to-day as a Quality Engineer, youll:
- Support and maintain compliance with AS9100, customer, and regulatory requirements
- Lead and support root cause analysis, MRB, and corrective actions
- Review and interpret First Article Inspection Reports (FAIRs)
- Act as a key contact for quality matters both internally and externally
- Drive waste and variation reduction using lean and six sigma principles
- Participate in audits, customer reviews, and business improvement workshops
- Help develop and implement standard processes across departments
- Promote and embed a culture of continuous improvement
What were looking for in a Quality Engineer:
- Proven experience as a Quality Engineer within aerospace or other precision engineering sectors
- Strong understanding of manufacturing processes and engineering drawings
- Working knowledge of AS9100, ISO9001, and ideally NADCAP
- Experience with auditing, inspection techniques, and problem-solving tools
- HNC or professional qualification in a relevant discipline
- Lead auditor training or certification would be advantageous
- Confident communicator with strong analytical and decision-making skills
What youll get:
- Salary around the £35,000 mark, depending on experience
- The chance to work on high-end aerospace projects within a forward-thinking business
- A collaborative culture that values professional development and continuous improvement
If youre a Quality Engineer looking to take ownership of quality initiatives and play a big part in a companys ongoing success, this ones for you.
Call Ian at Holt Engineering on 07734406996 ....Read more...
Type: Permanent Location: Weymouth,England
Start: 06/01/2026
Salary / Rate: £35000 - £40000 per annum
Posted: 2026-01-06 08:17:04
-
A leading aerospace and aviation organisation is seeking an experienced Compliance Investigator to support its Maintenance, Repair and Overhaul (MRO) operations.
This is a contract opportunity, based primarily in Oxfordshire, with regular travel required to operational sites across the UK.
The successful contractor will play a key role in ensuring regulatory and operational compliance, conducting in-depth investigations, identifying root causes, and driving corrective and preventive actions.
This role sits within a compliance and quality-focused environment and supports the promotion of safety, standardisation, and continuous improvement across multiple locations.
Key ResponsibilitiesCompliance Investigations & Root Cause Analysis
Conduct thorough investigations into compliance-related incidents, discrepancies, and safety concerns
Perform MEDA investigations where required
Apply Root Cause Analysis methodologies such as 5 Whys, Fishbone Diagrams, and Fault Tree Analysis
Identify Human Factors and Human Performance contributors
Analyse trends and systemic issues, ensuring sustainable corrective actions are implemented
Regulatory & Quality Assurance
Ensure adherence to applicable aviation regulatory frameworks, including Part 145 and associated UK/EASA requirements
Support compliance with CAMO, Part 21 G, and military aviation regulations where applicable
Work closely with Quality and Assurance teams to support audits and inspections
Support regulatory audits and coordinate responses to findings, ensuring timely closure of non-conformances
Process Improvement & Risk Mitigation
Collaborate with cross-functional teams to improve maintenance procedures and operational effectiveness
Recommend and support implementation of risk mitigation strategies
Promote best practice in safety, human factors, and compliance monitoring
Stakeholder Engagement & Reporting
Produce clear, structured investigation reports with recommendations for senior stakeholders and regulators
Engage with engineering, maintenance, production, and safety teams to improve compliance awareness
Maintain accurate investigation records and track corrective and preventive actions (CAPA)
Essential Experience & Skills
Proven experience conducting compliance investigations within an aviation maintenance or aerospace environment
Strong expertise in Root Cause Analysis and structured problem-solving techniques
In-depth knowledge of UK CAA and EASA regulatory frameworks, particularly Part 145
Solid understanding of Human Factors, Human Performance, and limitations
Experience reviewing technical documentation, maintenance records, and regulatory requirements
Background in audits and inspections within a maintenance or regulated environment
Strong analytical, report-writing, and stakeholder communication skills
Proficiency with Quality Management Systems (QMS) and compliance monitoring tools
Desirable Experience
Experience with MEDA investigations
Knowledge of CAMO, Part 21 G, and/or military aviation regulations (MRP 145, MIL CAMO)
Familiarity with ISO 9001, AS9100, or equivalent aviation quality standards
Experience using Lean, Six Sigma, or continuous improvement methodologies
Ability to engage confidently with stakeholders at all levels
Qualifications & Experience Essential
Formal training in Root Cause Analysis and investigative techniques
Security Clearance (SC) or the ability to obtain clearance
Desirable
Aviation Safety Management Systems (SMS) certification
Aviation Auditor or Lead Auditor certification
Lean Six Sigma Green or Black Belt
Extensive background in compliance, investigation, or audit roles within an aviation MRO setting
This contract role would suit a compliance-focused aviation professional who thrives in regulated environments and is comfortable working across multiple sites.
Applications are welcomed from all suitably qualified contractors regardless of gender, background, or personal characteristics.
....Read more...
Type: Contract Location: Oxfordshire, England
Start: ASAP
Duration: 6-months
Salary / Rate: £30 - £32 per hour + Umbrella rate
Posted: 2026-01-05 15:40:55
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Supervisor will oversee the day-to-day manufacturing activities of their respective shift to meet daily, monthly, quarterly, and yearly productivity goals.
The position will provide leadership for the hourly associates, driving the lean process to maximize growth, throughput, customer service, and cleanliness.
Other responsibilities include improving workforce flexibility, reducing operating costs, supporting Lean Six Sigma initiatives, including Small K and process improvements, and holding their employees accountable.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Leads the activities of the team members in the production of quality products in accordance with work instructions and company policy, to ensure a quality product delivered on time.
Responsible for implementing and maintaining safety standards, as required by law and company policy.
Implements Skill Sets and job-related training for all employees on the shift.
Coaches and provides technical and Supervisory expertise to resolve processing issues and creates and ensures corrective actions are implemented.
Manages the execution of the Production Schedule.
Supervisory responsibilities include management of employee performance, hiring, discipline, development, and resource planning.
Implements and reviews SOPs and drives compliance standards.
Utilizes problem-solving techniques and teamwork-building strategies to meet or exceed the facility's key operating statistics.
Facilitates workflow management, workforce scheduling, and team members' placement to ensure the facility and company goals are successfully met or exceeded.
Conducts leads or implements the appropriate lean process audits.
Maintains adherence to company policies, standard work, safety standards, and good housekeeping practices.
Learns and performs training on the SAP production modules.
Participates in scheduled Gemba walks and drives resolution to identified wastes and issues.
Uses DAKOTA software as a compliance tool for environmental health and safety.
Leads Daily Tier meetings with Production Associates.
Posts constraints and drives resolution in a timely manner.
Enforces plant housekeeping standards.
Performs other job duties, as assigned.
EDUCATION:
Bachelor's degree from a four-year college or university.
EXPERIENCE:
Four to ten years' related experience and/or training.
Demonstrated experience working hands-on in a manufacturing production environment.
Minimum of three years of direct supervisory experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Excellent verbal and written communication.
Proficient in Microsoft Suites and Statistical Analysis.
SAP applications and other Enterprise Resource Planning (ERP) utilization.
Proven facility and leadership.
Labor relations and negotiation.
Interact with all levels of the organization.
Knowledge of arithmetic, "Lean" concepts, Lean Six Sigma, ISO procedures, and their applications.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-01-04 22:07:56
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Supervisor will oversee the day-to-day manufacturing activities of their respective shift to meet daily, monthly, quarterly, and yearly productivity goals.
The position will provide leadership for the hourly associates, driving the lean process to maximize growth, throughput, customer service, and cleanliness.
Other responsibilities include improving workforce flexibility, reducing operating costs, supporting Lean Six Sigma initiatives, including Small K and process improvements, and holding their employees accountable.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Leads the activities of the team members in the production of quality products in accordance with work instructions and company policy, to ensure a quality product delivered on time.
Responsible for implementing and maintaining safety standards, as required by law and company policy.
Implements Skill Sets and job-related training for all employees on the shift.
Coaches and provides technical and Supervisory expertise to resolve processing issues and creates and ensures corrective actions are implemented.
Manages the execution of the Production Schedule.
Supervisory responsibilities include management of employee performance, hiring, discipline, development, and resource planning.
Implements and reviews SOPs and drives compliance standards.
Utilizes problem-solving techniques and teamwork-building strategies to meet or exceed the facility's key operating statistics.
Facilitates workflow management, workforce scheduling, and team members' placement to ensure the facility and company goals are successfully met or exceeded.
Conducts leads or implements the appropriate lean process audits.
Maintains adherence to company policies, standard work, safety standards, and good housekeeping practices.
Learns and performs training on the SAP production modules.
Participates in scheduled Gemba walks and drives resolution to identified wastes and issues.
Uses DAKOTA software as a compliance tool for environmental health and safety.
Leads Daily Tier meetings with Production Associates.
Posts constraints and drives resolution in a timely manner.
Enforces plant housekeeping standards.
Performs other job duties, as assigned.
EDUCATION:
Bachelor's degree from a four-year college or university.
EXPERIENCE:
Four to ten years' related experience and/or training.
Demonstrated experience working hands-on in a manufacturing production environment.
Minimum of three years of direct supervisory experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Excellent verbal and written communication.
Proficient in Microsoft Suites and Statistical Analysis.
SAP applications and other Enterprise Resource Planning (ERP) utilization.
Proven facility and leadership.
Labor relations and negotiation.
Interact with all levels of the organization.
Knowledge of arithmetic, "Lean" concepts, Lean Six Sigma, ISO procedures, and their applications.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-01-04 22:07:38
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-04 22:07:22
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-04 14:08:43
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished product and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products. Ensure that quality checks are performed at the required frequency and targets, additionally periodically evaluate target levels, and amend as appropriate. Regularly audit product and process to ensure standard work executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management. Track, report, and reduce manufacturing waste. Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems. Research customer complaints including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order. Organize and maintain related files, logs, and reports. Develop quality standards/test/inspection plan for raw materials and finished product (specification, sample size and frequency) as well as a robust training process. Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years supervisory experience. Demonstrated knowledge and experience in quality related programs such as lean, ISO, six sigma, etc.
CERTIFICATES, LICENSES, REGISTRATIONS:
Attain and maintain all related Health and Safety Certifications.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Familiarity with manufacturing regulations and reporting methods. Knowledge of the production process and team interactions. Analytical acumen for compiling and analyzing data. Ability to plan, organize, follow through and prioritize. Ability to interact with all levels within organization. Strong verbal and written communication abilities. Quality and safety oriented, attention to details. Training in quality programs (lean, ISO, Six Sigma)
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $66,434 and $83,044.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-01-03 22:09:17
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished product and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products. Ensure that quality checks are performed at the required frequency and targets, additionally periodically evaluate target levels, and amend as appropriate. Regularly audit product and process to ensure standard work executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management. Track, report, and reduce manufacturing waste. Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems. Research customer complaints including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order. Organize and maintain related files, logs, and reports. Develop quality standards/test/inspection plan for raw materials and finished product (specification, sample size and frequency) as well as a robust training process. Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years supervisory experience. Demonstrated knowledge and experience in quality related programs such as lean, ISO, six sigma, etc.
CERTIFICATES, LICENSES, REGISTRATIONS:
Attain and maintain all related Health and Safety Certifications.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Familiarity with manufacturing regulations and reporting methods. Knowledge of the production process and team interactions. Analytical acumen for compiling and analyzing data. Ability to plan, organize, follow through and prioritize. Ability to interact with all levels within organization. Strong verbal and written communication abilities. Quality and safety oriented, attention to details. Training in quality programs (lean, ISO, Six Sigma)
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $66,434 and $83,044.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-01-03 22:08:58
-
Manufacturing Process Engineer required to introduce the latest manufacturing technologies and machines to ensure the smooth introduction of new products into production.
Experience
Manufacturing processes, methodologies, technologies and planning.
Project Management of resources and budgets to meet project targets.
Manufacturing safety regulations and practices, ensure the protection of workers and the environment.
Lean Manufacturing implementing lean strategies into existing production processes continuously identifying and eliminating inefficiencies in the manufacturing process.
Understanding of the assembly, test and finishing processes related to building and construction equipment production.
Familiarity of Siemens Teamcenter is desirable.
Six Sigma project leadership to improve quality and manufacturing processes.
Engineering or a related degree.
Lean Manufacturing and Six Sigma certification advantageous.
Role
Identify opportunities for process improvement or new technology opportunities, assess their impact, and model capital investment.
Lead New Product Introduction and Improvement Projects impacting technology, efficiency and quality from initiation through to production completion.
Ensuring they are delivered on time, within budget, and to scope.
Work with cross-functional teams to develop manufacturing process solutions using tools such as process flows, PFMEAs, control plans, and lean methodologies.
Ensure processes are safe, efficient, and meet manufacturing needs.
Develop equipment specifications and installation requirements, ensuring the equipment is safe and aligned with the needs of the manufacturing process.
Drive DFM and best manufacturing practices, ensuring manufacturability and efficiency in product design. ....Read more...
Type: Permanent Location: Hinckley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £58000 Per Annum None
Posted: 2026-01-02 13:22:02
-
Quality Engineer
Weymouth, Dorset
Quality Engineer Salary: £35k - £40k
Play a key role in driving quality, compliance, and improvement within a world-class precision manufacturer.
Were working with a highly respected aerospace engineering company based in Dorset, known for producing complex precision components and assemblies to the highest standards.
Theyre now looking for an experienced Quality Engineer to strengthen their quality department and support continuous improvement across the business.
As a Quality Engineer, youll be the go-to person for all things quality, from internal audits and customer reviews to supporting MRB, RCCA, and process improvement initiatives.
Youll work closely with the Quality Manager, customers, and production teams to ensure everything leaving the site meets both AS9100 requirements and customer expectations.
Day-to-day as a Quality Engineer, youll:
- Support and maintain compliance with AS9100, customer, and regulatory requirements
- Lead and support root cause analysis, MRB, and corrective actions
- Review and interpret First Article Inspection Reports (FAIRs)
- Act as a key contact for quality matters both internally and externally
- Drive waste and variation reduction using lean and six sigma principles
- Participate in audits, customer reviews, and business improvement workshops
- Help develop and implement standard processes across departments
- Promote and embed a culture of continuous improvement
What were looking for in a Quality Engineer:
- Proven experience as a Quality Engineer within aerospace or other precision engineering sectors
- Strong understanding of manufacturing processes and engineering drawings
- Working knowledge of AS9100, ISO9001, and ideally NADCAP
- Experience with auditing, inspection techniques, and problem-solving tools
- HNC or professional qualification in a relevant discipline
- Lead auditor training or certification would be advantageous
- Confident communicator with strong analytical and decision-making skills
What youll get:
- Salary around the £35,000 mark, depending on experience
- The chance to work on high-end aerospace projects within a forward-thinking business
- A collaborative culture that values professional development and continuous improvement
If youre a Quality Engineer looking to take ownership of quality initiatives and play a big part in a companys ongoing success, this ones for you.
Call Hayden at Holt Engineering on 07955 081 482. ....Read more...
Type: Permanent Location: Weymouth,England
Start: 02/01/2026
Salary / Rate: £35000 - £40000 per annum
Posted: 2026-01-02 12:08:04
-
JOB DESCRIPTION
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Production Maintenance Technician I/II/Senior/Lead is responsible for performing repairs, maintenance, and operational activities in support of manufacturing, The PMT helps maintain an inventory of manufacturing equipment, hand tools, molds, fixtures, and gauges, including spare parts.
The PMT establishes and maintains a preventive maintenance program.
participates in new equipment installations.
The PMT will assist manufacturing by assessing needs, researching and evaluating new tools and equipment, developing fixtures, and shop aids.
Work Schedule
Monday - Friday, 9am - 6pm
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Provide maintenance support for all process equipment, which will entail repair of down equipment and the coordination of various maintenance projects.
Analyze, troubleshoot and diagnose equipment, machines, and process related problems.
Perform maintenance, fabrication, adjustment, and repairs on all machinery and equipment.
Develop and review spare parts lists and inventory, order repair parts and tools, and keep accurate maintenance records utilizing Limble or other PMT programs.
Improve preventative maintenance plans including procedures with instructions for operator preventative maintenance.
Perform scheduled preventative maintenance activities.
Install, set up, evaluate and make recommendations regarding new/existing equipment.
Make modifications to equipment to optimize performance.
Coordinate fabrication of fixtures and shop aids.
Ensure that manufacturing systems meet health, safety, and environmental management requirements.
Perform other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
High School Diploma or GED required.
___________________________________________________________________________
Production Maintenance Technician I
Production Maintenance Technician I is the entry-level classification in the Production Maintenance Technician series and is intended for individuals with limited or no related work experience.
Employees in the classification receive on-the-job training and experience in the maintenance of process equipment.
As experience and proficiency are gained, assignments will become more varied and difficult; supervision become more general rather than direct.
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire:
Basic understanding of electrical, hydraulic and other systems, knowledge of general maintenance processes and methods, performing necessary equipment repairs, and working knowledge of hand tools and problem-solving skills.
This level requires the following certifications be initiated within six (6) months of hire:
LOTO certified, Forklift certified, Fall protection certification
The Production Maintenance Technician I will receive close instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
______________________________________________________________________________
Production Maintenance Technician II
This is the next level of the Production Maintenance Technician series and is required to have a minimum of 5 years of previous experience and working knowledge and competent demonstration of the following:
Solid understanding of pneumatic /electrical drills, grinders, routers, and motors.
Solid understanding of electrical, hydraulic and other systems, general maintenance processes and methods, power tools, welders and machine shop equipment.
Solid problem-solving skills including equipment breakdown, performing repairs and installation.
Previous welding experience preferred.This level requires the following certifications:
LOTO certified, Forklift certified, Fall protection certificationThe Production Maintenance Technician II performs broader range of duties, proven skillset to fully perform PMT responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
The Production Maintenance Technician II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required.
Knowledge of Lock Out/Tag Out and PPE.
Knowledge of methods, practices, materials, tools, and equipment used in the repair and maintenance of machinery and equipment or the ability to quickly learn processes and to problem solve.
Skill in verbal and written communication.
Skill in problem-solving.
Skilled at manufacturing shop math skills.
Ability to work in confined spaces and wear a silo harness.
Ability to communicate and comprehend in English, both verbal and written.
Ability to use independent discretion and judgement within organizational values, policies, and procedures.
Ability to follow directions.
Ability to work overtime.
Ability to pass a pre-employment background check.
Hiring Range
Between $22.00 - $31.50 per hour
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-12-29 06:13:25
-
JOB DESCRIPTION
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Production Maintenance Technician I/II/Senior/Lead is responsible for performing repairs, maintenance, and operational activities in support of manufacturing, The PMT helps maintain an inventory of manufacturing equipment, hand tools, molds, fixtures, and gauges, including spare parts.
The PMT establishes and maintains a preventive maintenance program.
participates in new equipment installations.
The PMT will assist manufacturing by assessing needs, researching and evaluating new tools and equipment, developing fixtures, and shop aids.
Work Schedule
Monday - Friday, 9am - 6pm
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Provide maintenance support for all process equipment, which will entail repair of down equipment and the coordination of various maintenance projects.
Analyze, troubleshoot and diagnose equipment, machines, and process related problems.
Perform maintenance, fabrication, adjustment, and repairs on all machinery and equipment.
Develop and review spare parts lists and inventory, order repair parts and tools, and keep accurate maintenance records utilizing Limble or other PMT programs.
Improve preventative maintenance plans including procedures with instructions for operator preventative maintenance.
Perform scheduled preventative maintenance activities.
Install, set up, evaluate and make recommendations regarding new/existing equipment.
Make modifications to equipment to optimize performance.
Coordinate fabrication of fixtures and shop aids.
Ensure that manufacturing systems meet health, safety, and environmental management requirements.
Perform other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
High School Diploma or GED required.
___________________________________________________________________________
Production Maintenance Technician I
Production Maintenance Technician I is the entry-level classification in the Production Maintenance Technician series and is intended for individuals with limited or no related work experience.
Employees in the classification receive on-the-job training and experience in the maintenance of process equipment.
As experience and proficiency are gained, assignments will become more varied and difficult; supervision become more general rather than direct.
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire:
Basic understanding of electrical, hydraulic and other systems, knowledge of general maintenance processes and methods, performing necessary equipment repairs, and working knowledge of hand tools and problem-solving skills.
This level requires the following certifications be initiated within six (6) months of hire:
LOTO certified, Forklift certified, Fall protection certification
The Production Maintenance Technician I will receive close instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
______________________________________________________________________________
Production Maintenance Technician II
This is the next level of the Production Maintenance Technician series and is required to have a minimum of 5 years of previous experience and working knowledge and competent demonstration of the following:
Solid understanding of pneumatic /electrical drills, grinders, routers, and motors.
Solid understanding of electrical, hydraulic and other systems, general maintenance processes and methods, power tools, welders and machine shop equipment.
Solid problem-solving skills including equipment breakdown, performing repairs and installation.
Previous welding experience preferred.This level requires the following certifications:
LOTO certified, Forklift certified, Fall protection certificationThe Production Maintenance Technician II performs broader range of duties, proven skillset to fully perform PMT responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
The Production Maintenance Technician II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required.
Knowledge of Lock Out/Tag Out and PPE.
Knowledge of methods, practices, materials, tools, and equipment used in the repair and maintenance of machinery and equipment or the ability to quickly learn processes and to problem solve.
Skill in verbal and written communication.
Skill in problem-solving.
Skilled at manufacturing shop math skills.
Ability to work in confined spaces and wear a silo harness.
Ability to communicate and comprehend in English, both verbal and written.
Ability to use independent discretion and judgement within organizational values, policies, and procedures.
Ability to follow directions.
Ability to work overtime.
Ability to pass a pre-employment background check.
Hiring Range
Between $22.00 - $31.50 per hour
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-12-28 22:09:11
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee the day-to-day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
The Production Manager will drive the lean process to maximize profitable growth, provide premier customer service, develop a technically qualified workforce, reduce operating costs and inventories through incremental and quantum continuous improvements.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant-level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant-wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Promotes and ensures a safe and environmentally compliant work environment.
Directly manages the departmental cell and works cooperatively with other functional managers/supervisors/leaders to optimize the entire value stream.
The Product Manager is relentless about implementing MS168 and continuous improvement.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
HS Diploma with 8+ years' experience OR
Engineering Degree with 2 years' experience OR
Non-Engineering Degree with 4 years' experience.
EXPERIENCE REQUIREMENT:
1 year of previous supervisor or management experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong leadership, negotiation, and communication skills.
Demonstrate problem analysis and problem solving.
Ability to organize, plan, and execute.
Experience in implementing Lean.
Demonstrated experience working hands-on in a production environment.
Proven leadership skills or ability to develop.
Excellent verbal and written communication skills.
Ability to learn and use Microsoft Office and SAP.
Ability to interact with all levels of the organization.
Labor relations and negotiation skills.
Principles of Lean Six Sigma.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Key focus points for the Production Manager.
Provide direction to Supervisors and development of the workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive needs; for example, vacuum times and upgrading the Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps between Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Lead and oversee all aspects of the production process to ensure safety, quality, and productivity goals are consistently met.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-12-28 06:08:27
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee the day-to-day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
The Production Manager will drive the lean process to maximize profitable growth, provide premier customer service, develop a technically qualified workforce, reduce operating costs and inventories through incremental and quantum continuous improvements.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant-level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant-wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Promotes and ensures a safe and environmentally compliant work environment.
Directly manages the departmental cell and works cooperatively with other functional managers/supervisors/leaders to optimize the entire value stream.
The Product Manager is relentless about implementing MS168 and continuous improvement.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
HS Diploma with 8+ years' experience OR
Engineering Degree with 2 years' experience OR
Non-Engineering Degree with 4 years' experience.
EXPERIENCE REQUIREMENT:
1 year of previous supervisor or management experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong leadership, negotiation, and communication skills.
Demonstrate problem analysis and problem solving.
Ability to organize, plan, and execute.
Experience in implementing Lean.
Demonstrated experience working hands-on in a production environment.
Proven leadership skills or ability to develop.
Excellent verbal and written communication skills.
Ability to learn and use Microsoft Office and SAP.
Ability to interact with all levels of the organization.
Labor relations and negotiation skills.
Principles of Lean Six Sigma.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Key focus points for the Production Manager.
Provide direction to Supervisors and development of the workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive needs; for example, vacuum times and upgrading the Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps between Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Lead and oversee all aspects of the production process to ensure safety, quality, and productivity goals are consistently met.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-12-27 22:07:37
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-12-25 22:08:10
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-12-25 22:08:10
-
Business Improvement Lead - Transformation - BirminghamBusiness Improvement Lead required for a leading company based in Birmingham to be responsible for driving the improvement of business processes and practices across Group.
This role focuses on assessing current processes, identifying opportunities for improvement, ascertaining areas of good practice, and implementing programs of work to enhance process quality.The ideal candidate for this role will have previous experience working in a Business Improvement role, be comfortable dealing with stakeholders of all levels and be able to operate strategically.The salary on offer for this position is £60,000 per annum plus benefits.
Hybrid - Birmingham
Key Skills :
Extensive experience in process improvement and transformation within a large, multi-site organisation.
Proven ability in supporting large-scale transformation projects.
Target Operation Model experience
Strong analytical skills to assess processes and quantify potential process improvements.
Exceptional communication abilities to manage stakeholder expectations and team collaboration effectively.
Comfortable at managing through ambiguous or moving situations.
Qualifications such as Six Sigma, Lean, or similar process improvement methodologies would be advantageous.
Ability to think outside the box and bring creative solutions to complex process challenges.
Flexibility to adapt strategies in response to new information or changing conditions.
Experience of using process mining platforms to analyse business processes, and produce actionable insights and recommendations.
Interested?! Send your up-to-date CV to Emma Siwicki at Crimson for reviewNot interested?! Do you know anyone that might be? Refer a friend for this role to earn £250 worth of vouchers.
Crimson is acting as an employment agency regarding this vacancy ....Read more...
Type: Permanent Location: Birmingham, England
Salary / Rate: Up to £60000 per annum
Posted: 2025-12-24 11:02:27
-
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies.
Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g.
First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g.
through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £24000 - £42000 Per Annum None
Posted: 2025-12-24 10:58:16
-
The Manufacturing Engineer is responsible for complex electronic assemblies.
Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics.
Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g.
First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g.
through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £46000 Per Annum None
Posted: 2025-12-24 10:57:08
-
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £22000 - £38000 Per Annum None
Posted: 2025-12-23 09:53:39
-
Are you an experienced Business Analyst with a proven ability in delivering concurrent business solutions within IT/change programmes and projects? Let Informed Recruitment help you to achieve your potential with an exciting opportunity for a Business Analyst to work on formulating, developing, and taking responsibility for end-to-end business solutions within a change portfolio.
As a specialist provider of resource to the Property & Associated Technology markets, we are delighted to be partnering with a social enterprise offering you the opportunity to make a difference and gain experience as part of modern environment championing continual improvement.
The purpose of the role will be to take a lead on all business analysis facets of large or complex business change and technology programmes and shape the associated business outcomes.
Your day-to-day responsibilities will include driving the business goals ensuring that they are understood and documented; engaging with key stakeholders to complete robust analysis in line with the overall delivery plan; using Lean and Lean Six to drive efficiencies and improvements, the production of artefacts such as Process architectures, Process Designs, Logical Data Models, Agile user Journeys amongst others; working to continuously improve business analysis practice; mentoring and supporting direct reports; requirement gathering ensuring robust elicitation & validation; translating business requirement into function & technical specifications by engaging with internal & external stakeholders; improving existing business processes, artefact production, solution support and user acceptance testing; and change impact assessments amongst other responsibilities. Must Have
Demonstrable commercial experience of effectively working independently as a Business Analysis.
A track record of delivering tangible process improvements utilising Lean, Six Sigma or other process improvement techniques.
Experience of Business Process Modelling, leveling methods and/or BPMN 2.0 experience.
Previous experience of delivering in both an Agile/Scrum and iterative/Waterfall environment.
Robust artefact creation and documentation.
Some formal certification such as BCS Foundation as a minimum, and evidence of working towards BCS Diploma Business Analysis certification (or similar level)
Nice to Have
Experience of Cloud Adoption projects and/or ERP SaaS solutions such as Oracle Fusion, Salesforce, SAP, Microsoft Dynamics 365 or similar
Experience in property management processes such as Income Management, Rents, Service Charges,
Leasehold, Estates, Tenancies, Allocations, Lettings, Repairs, Maintenance, Assets, Customers, or similar.
Lean or Lean Six Sigma accreditation.
As an individual you will have a strong and proven analytical background with working on large and complex projects and programmes from the concept stage through to the operational acceptance, excellent problem-solving skills, and attention to detail, be a self-starter comfortable with taking responsibility for delivery.
You will have excellent interpersonal skills, the ability to think on your feet and be ultimately goal orientated.
Alongside a competitive salary you will receive an impressive benefits package that includes bonus scheme, generous employer matched pension, flexible working, generous leave entitlement, life/health insurance and professional development.
The role will be hybrid based, with one or two days spent in the office in Hampshire on a weekly basis If this role describes you, then please apply without delay for the opportunity to continue your career with a driven yet friendly organisation continually looking to provide a better service to customers.
Informed Recruitment Limited acts as an Employment Agency in respect to this vacancy as defined by the Employment Agencies Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, national origin, disability status, or any other basis protected by appropriate law.
All hiring decisions are made based on merit, competence, and business need.
As defined under the General Data Protection Regulation (GDPR), Informed Recruitment is a Data Controller and a Data Processor, and our legal basis for processing your personal data is 'Legitimate Interests'.
You have the right to object to us processing your data in this way.
For more information about this, your rights, and our approach to Data Protection and Privacy, please visit our website. ....Read more...
Type: Permanent Location: Portsmouth, England
Salary / Rate: £48000 - £51000 per annum + pension, bonus
Posted: 2025-12-23 09:50:21
-
JOB DESCRIPTION
Position Summary:
Responsible for processing outbound / inbound warehouse materials, including paperwork, scanning, skid wrapping, and forklift operation to move materials, the loading and unloading of trucks and general warehouse duties.
Essential Functions:
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP
Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP
Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods
Identifies, pulls, counts, stages and ships orders.
Process pick-sheets, skid labels, bills of lading documents.
Loads and unloads trucks.
Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently.
Maintains orderliness and cleanliness in receiving and storage areas.
Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor.
Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements:
High School Diploma or GED
One year minimum warehouse experience.
Six (6) months previous shipping/receiving or one-year prior general warehouse experience
Forklift operations experience
Preferred Requirements:
Hazmat materials training
Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements:
Must pass standard eye examination (corrected or uncorrected)
Bending, squatting, kneeling, lifting - frequent
Must be able to pick up 50# bags
80% - Loading/unloading utilizing forklift
20% - Scanning and Paperwork
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $16.00/hour and $19.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2025-12-23 06:09:34
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: CI Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Ready to make an impact this summer? As a Continuous Improvement (CI) Intern, you'll dive into real-world manufacturing challenges and help drive smarter, faster, and more efficient production processes.
You'll work side-by-side with experienced engineers, learn Lean Manufacturing principles, and contribute to projects that reduce waste, improve quality, and boost performance.
This is your chance to turn ideas into action and gain hands-on experience in a fast-paced, innovation-driven environment.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering, Chemistry, or a related field.
Available to work 30-40 hours per week from May to August.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Strong excel skills.
Preferred: Passion for process improvement and manufacturing operations and basic understanding of Lean or Six Sigma.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Gather and analyze production data to uncover trends, inefficiencies, and opportunities for improvement.
Support ongoing process improvement projects using Lean and Six Sigma methodologies.
Create and update clear, user-friendly procedures and training materials.
Participate in/lead team meetings to brainstorm ideas and evaluate process enhancements.
Shadow engineers and quality professionals to gain hands-on insight into manufacturing systems.
Assist with safety and environmental initiatives to promote a responsible and compliant workplace.
Take on additional tasks and projects that support team goals and help build your professional skills.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-12-22 22:08:52
