-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-07-12 15:18:00
-
JOB DESCRIPTION
We are currently looking for an individual to fill a Batch Maker position at our manufacturing plant in Medina, Ohio.
Duties/Responsibilities, Core knowledge:
Handles batch making responsibilities in all departments
Trained to make all formulations i.e.
Roof coating, Latex, and Solvent departments
Responsible for housekeeping in the work area
Reports raw material/equipment needs to Production Manager
Helps maintain inventory levels/cycle counts
Fills batches according to need i.e.
1's, 5's, 55's or totes (domestic or export)
Operates tow motor
Shop floor reporting
Submit a batch sample to QC lab for approval and retain before filling
Skills, Qualifications, Experience, Special Physical Requirements:
Computer literacy is required, a basic understanding of SAP is helpful.
Able to work independently in a team-based lean/six sigma environment and contribute to the team's overall success.
Preferred background in the Chemical Industry with batch-making experience.
Demonstrated safe work record
Demonstrated reliable attendance
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Medina, Ohio
Posted: 2025-07-12 15:11:07
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-07-12 15:10:53
-
JOB DESCRIPTION
We are currently looking for an individual to fill a Batch Maker position at our manufacturing plant in Medina, Ohio.
Duties/Responsibilities, Core knowledge:
Handles batch making responsibilities in all departments
Trained to make all formulations i.e.
Roof coating, Latex, and Solvent departments
Responsible for housekeeping in the work area
Reports raw material/equipment needs to Production Manager
Helps maintain inventory levels/cycle counts
Fills batches according to need i.e.
1's, 5's, 55's or totes (domestic or export)
Operates tow motor
Shop floor reporting
Submit a batch sample to QC lab for approval and retain before filling
Skills, Qualifications, Experience, Special Physical Requirements:
Computer literacy is required, a basic understanding of SAP is helpful.
Able to work independently in a team-based lean/six sigma environment and contribute to the team's overall success.
Preferred background in the Chemical Industry with batch-making experience.
Demonstrated safe work record
Demonstrated reliable attendance
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Medina, Ohio
Posted: 2025-07-12 15:10:12
-
We are seeking a talented and driven Process Engineer to join a Chemical Manufacturer, in Lancashire who will play a key role in delivering safe, efficient, and cost-effective operations.
The successful candidate will provide a broad range of process engineering services, including project management, troubleshooting, risk assessment, and continuous improvement. Key Responsibilities of Process Engineer:
Deliver comprehensive process engineering support across the site, including design, risk evaluation, operational troubleshooting, and project management, ensuring alignment with company policies and relevant legislation.
Develop and implement targeted improvement programs to maximise process yield, throughput, and product quality, while reducing utility consumption, waste, and batch variability.
Lead or support capital projects, including debottlenecking, plant modifications, and process upgrades, either directly or by working with cross-functional project teams.
Serve as a key Process Engineer liaison between operations, maintenance, quality, and EHS to drive performance and ensure smooth integration of engineering solutions.
Identify and involve appropriate internal and external resources and skills to scope, specify, design and commission projects
Conduct root cause analyses for process deviations and implement corrective and preventive measures that support sustainable operations.
Supporting production operations by continuously improving manufacturing processes, using lean techniques to achieve positive impacts on quality, cost, delivery and safety.
Ensure process designs and modifications comply with safety, environmental, and regulatory standards, including HAZOP and LOPA assessments.
Prepare and maintain accurate documentation, including PFDs, P&IDs, SOPs, and process reports, in support of engineering and operational excellence.
Qualifications and Experience:
Degree in Chemical Engineering or a related field.
Relevant experience as a Process Engineer in a chemical, pharmaceutical, or related manufacturing environment.
Working knowledge of process safety standards and methodologies (e.g., HAZOP, LOPA, FMEA).
Proven ability to manage projects and work cross-functionally in a fast-paced environment.
Six Sigma or Lean Manufacturing experience is desirable.
Why Join the Team?As a Process Engineer on the team, you will be empowered to take ownership of improvement initiatives and contribute directly to site performance.
You will work in a collaborative, safety-focused environment where innovation and continuous learning are valued.
Please click the link below to apply directly! ....Read more...
Type: Permanent Location: Accrington, England
Start: ASAP
Salary / Rate: Up to £50000 per annum
Posted: 2025-07-10 23:35:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Quality Control Manager manages the Quality Process to ensure we are effectively meeting our key business metrics and satisfying all customer product requirements.
Key responsibilities include Quality, Lean and Six Sigma, and Continuous Improvement, with responsibility for ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality-related functions in the plant.
Act as primary plant liaison with Customers dealing with their processing issues.
Participate in the development of specifications for processing, products, and materials.
Work directly with Corporate and local Purchasing on vendor quality or supply issues; assist with vendor selection and qualification.
Manage ISO Quality systems.
Lead the Lean/Six Sigma initiatives in the plant.
Respond to and report on internal and external quality concerns - manage the root cause investigation, corrective action implementation, and follow up, and the SAP quality process.
Interact professionally and timely both verbally and in writing with customers and the sales force.
Develop quality standards for raw materials and finished products.
Oversee all lab functions and personnel, assuring safety and integrity of those operations.
Test on raw materials and finished product as required.
Implement material cost-saving plans where and when appropriate.
Participate in annual budget planning.
Assist in all compliance activities, especially Hazcom and maintaining SDS system.
Other projects/tasks as assigned.
EDUCATION REQUIREMENT:
Degree in Quality, Chemistry, Chemical Engineering, Materials, Polymer, or Business.
EXPERIENCE REQUIREMENT:
2+ years' related experience.
Experience in Quality Programs (Lean, ISO, Six Sigma).
CERTIFICATES, LICENSES, REGISTRATIONS:
ISO certification.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
ISO knowledge. Six Sigma / Lean Thinking. Training experience. Strong communication skills (written, verbal). Confidentiality.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-07-10 07:16:56
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Quality Control Manager manages the Quality Process to ensure we are effectively meeting our key business metrics and satisfying all customer product requirements.
Key responsibilities include Quality, Lean and Six Sigma, and Continuous Improvement, with responsibility for ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality-related functions in the plant.
Act as primary plant liaison with Customers dealing with their processing issues.
Participate in the development of specifications for processing, products, and materials.
Work directly with Corporate and local Purchasing on vendor quality or supply issues; assist with vendor selection and qualification.
Manage ISO Quality systems.
Lead the Lean/Six Sigma initiatives in the plant.
Respond to and report on internal and external quality concerns - manage the root cause investigation, corrective action implementation, and follow up, and the SAP quality process.
Interact professionally and timely both verbally and in writing with customers and the sales force.
Develop quality standards for raw materials and finished products.
Oversee all lab functions and personnel, assuring safety and integrity of those operations.
Test on raw materials and finished product as required.
Implement material cost-saving plans where and when appropriate.
Participate in annual budget planning.
Assist in all compliance activities, especially Hazcom and maintaining SDS system.
Other projects/tasks as assigned.
EDUCATION REQUIREMENT:
Degree in Quality, Chemistry, Chemical Engineering, Materials, Polymer, or Business.
EXPERIENCE REQUIREMENT:
2+ years' related experience.
Experience in Quality Programs (Lean, ISO, Six Sigma).
CERTIFICATES, LICENSES, REGISTRATIONS:
ISO certification.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
ISO knowledge. Six Sigma / Lean Thinking. Training experience. Strong communication skills (written, verbal). Confidentiality.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-07-10 07:08:49
-
An exciting opportunity for an experienced Production Manager, Bedford, Bedfordshire is available to lead a high-performing team within a fast-paced electronics manufacturing environment.
The Production Manager, Bedford, Bedfordshire role is responsible for delivering the production schedule through effective planning, team leadership, and cross-functional collaboration.
This position also plays a key role in driving Continuous Improvement, innovation, and standardisation across the Manufacturing Cells, while maintaining world-class quality standards and fostering a positive, development-focused team culture.
The Key Responsibilities for the Production Manager, include;
People Management & Development of a large manufacturing department
Production Scheduling & Workflow
Continuous Improvement & Innovation, Lead a culture of continuous improvement using lean tools and methodologies such as 5S, GEMBA and Six Sigma Lean methodologies
The successful candidate for the Production Manager, Bedford, Bedfordshire will have a proven background in an electronic manufacturing environment.
APPLY NOW for the Production Manager, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref.
THD1337.
Otherwise, we always welcome the opportunity to discuss other roles similar to Manufacturing related jobs on 01582 878 848 or 07961158762. ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Salary / Rate: £50000 - £65000 per annum
Posted: 2025-07-08 14:19:00
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to: Lead small projects for improvement of a process or equipment Collect data for process waste reduction Edit or create P&IDs Work alongside Process Engineers on Capital Expense Projects Conduct meetings to communicate information or collaborate on projects Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required. Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-07-07 15:10:56
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to: Lead small projects for improvement of a process or equipment Collect data for process waste reduction Edit or create P&IDs Work alongside Process Engineers on Capital Expense Projects Conduct meetings to communicate information or collaborate on projects Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required. Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-07-07 15:10:52
-
JOB DESCRIPTION
Collaborate with the plant as well as corporate functions/departments to determine where the most significant areas of improvement exist and develop projects from those opportunities. Develop, prioritize, and execute continuous improvement initiatives aligned with the organization's goals and plant objectives. Assess, monitor, maintain, and enhance business performance by analyzing current practices, developing business process improvements, implementing changes in workflows, structures, and teams to ensure continuous company performance. Plan, facilitate, and execute continuous improvement events using Lean Six Sigma tools, provide support for plant level initiatives, and participate in Kaizen events on the production floor in support of Tremco's MS168 philosophies. Provide support to the production staff to ensure that implemented lean principles are understood and implement change management strategies to ensure successful adoption of process improvements. Lead cross functional work teams focused on identifying root causes and implementing corrective actions to provide sustainable improvements that meet/exceed expectations.
Conduct semi-Annual Audits Read, research, interpret, and analyze data on current processes, safety rules, operating and maintenance instructions, and procedure manuals. Leverage knowledge of tiered governance systems, Kaizen, 5S, visual management and SMED to assist sites in improving efficiencies by evaluating process and practice from various perspectives.
Influence and motivate others to attend to, participate in and own local continuous improvement efforts and initiatives. Lead cross-functional improvement projects, ensuring projects are completed on time, within budget, and meet predefined objectives.
Develop, monitor, and communicate project plans, timelines, and budgets with key stakeholders.
provide supportive project management expertise and monthly savings tracking, key performance indicators, and reporting.
Teach, lead and coach cross-functional teams on Lean Six Sigma tools and methodologies. Use data analytics such as statistical process control, process capability analysis, and correlation to make data driven decisions while demonstrating quantitative improvement/impact. Prepare, review, and analyze operational data, reports, and metrics to generate insights, identify trends, isolate bottlenecks, and make informed decisions.
Build a culture of continuous improvement by promoting awareness and buy-in at all levels of the organization. Develop and maintain comprehensive performance dashboards and reports.
Stay current with industry best practices, emerging trends, and technologies related to continuous improvement and benchmark against industry peers and incorporate best practices into the organization.
Education: & Experience:
Bachelor's degree, Process Management, or Operations, with concentration in Engineering preferred.
Four to seven years related experience and/or training Previous experience in a manufacturing environment, preferred in Chemical Manufacturing and/or batch manufacturing operations. Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations, write reports, business correspondence, and procedure manuals and effectively present information and respond to questions from diverse groups.
Solve Practical problems where only limited standardization exists.
Interprets instructions furnished in written, oral, diagram, or schedule form. Work with mathematical concepts and apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Preferred Lean Six Sigma Green Belt or higher certification. Must be able to work in the United States without current or future sponsorship requirements.
This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation/PTO/sick days/parental leave, 401(k), employee stock purchase plan, and Company provided pension plan.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-07-04 23:10:03
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Strategic Sourcing Buyer I/II/Senior is responsible for working cross-functionally with multiple stakeholders to diversify how and where materials are procured, brings new products to market, and tactfully supports operational buying.
This role encompasses planning, data analysis, reporting, negotiating, process development and cost management.
To deliver successful results, the Strategic Sourcing Buyer must develop strong internal/external relationships and knowledge of operations.
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Identify, evaluate, and select new suppliers that meet quality, delivery, and cost objectives
Design and implement scalable sourcing plans
Implement vendor contracts and supply agreements
Manage Bills of Material for new products, work with suppliers and buyers to obtain cost, lead time, minimum order quantity, tooling cost, to support all phases of development and product launch
Collaborate with other Legend Brands buyers and suppliers in the negotiation of contracts, pricing, problem resolution, and new product introduction
Manage and maintain procurement-related data and systems to support reporting and analysis
Execute and develop objectives to improve against department KPIs
Participate in Engineering and New Products Teams as an active member helping to influence best practice sourcing
Work with Quality Assurance to ensure procured materials/services meet technical, business, and quality requirements
Build relationships and collaborate with Sales Operations, Engineering, QA, Materials Management, Product Management, New Product Development, Accounting, and Production
Utilize advanced Excel functionality and D365 to analyze data, implement solutions and create successful business results
Stay up to date on industry trends, best practices, and regulatory changes to ensure compliance and maximize performance
Ability to convey complex information in a clear and concise manner
Report-out to leadership on project timelines, improvement, and status
Performs other related duties as assigned
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Business, Supply Chain, Engineering or related field required
Purchasing Certification is preferred
Previous project management experience preferred
Technical knowledge of HVAC parts and equipment preferred
Strategic Sourcing Buyer
I
Strategic Sourcing Buyer I is the first-level classification in the Strategic Sourcing Buyer series and is intended for individuals with a minimum of 2-5 years related work experience.
As experience and proficiency are gained, assignments will become more varied and difficult; supervision becomes more general rather than direct.
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire:
Lead sourcing events (RFI/RFQ/RFP) for defined categories
Perform total cost of ownership (TCO) and should-cost analyses
Negotiate pricing, terms, and supply agreements
Identify and onboard new suppliers
Moderate autonomy; resolving and escalating complex issues to senior staffThe Strategic Sourcing Buyer I receives close instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required.
Knowledge of MRP/ERP systems.
Skilled at managing vendors while focusing on quality and cost elimination.
Skilled at public speaking, presenting, and leading meetings.
Skilled in completing assignments accurately and with attention to detail.
Ability to travel 10% domestically, 5% internationally.
Ability to interpret engineering drawings and bridge communication between suppliers, engineering, and stakeholders.
Ability to pivot as new product requirements change.
Ability to negotiate.
Ability to communicate effectively in both written and oral form.
Ability to work successfully as a member of a team.
Ability to analyze, organize and prioritize work while meeting multiple deadlines.
Ability to pass a pre-employment background check.
Hiring Range:
Between $86,000 - $97,000/annually - position is incentive eligible.
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background screening
Accepting applications through August 31, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-07-04 23:10:02
-
JOB DESCRIPTION
Collaborate with the plant as well as corporate functions/departments to determine where the most significant areas of improvement exist and develop projects from those opportunities. Develop, prioritize, and execute continuous improvement initiatives aligned with the organization's goals and plant objectives. Assess, monitor, maintain, and enhance business performance by analyzing current practices, developing business process improvements, implementing changes in workflows, structures, and teams to ensure continuous company performance. Plan, facilitate, and execute continuous improvement events using Lean Six Sigma tools, provide support for plant level initiatives, and participate in Kaizen events on the production floor in support of Tremco's MS168 philosophies. Provide support to the production staff to ensure that implemented lean principles are understood and implement change management strategies to ensure successful adoption of process improvements. Lead cross functional work teams focused on identifying root causes and implementing corrective actions to provide sustainable improvements that meet/exceed expectations.
Conduct semi-Annual Audits Read, research, interpret, and analyze data on current processes, safety rules, operating and maintenance instructions, and procedure manuals. Leverage knowledge of tiered governance systems, Kaizen, 5S, visual management and SMED to assist sites in improving efficiencies by evaluating process and practice from various perspectives.
Influence and motivate others to attend to, participate in and own local continuous improvement efforts and initiatives. Lead cross-functional improvement projects, ensuring projects are completed on time, within budget, and meet predefined objectives.
Develop, monitor, and communicate project plans, timelines, and budgets with key stakeholders.
provide supportive project management expertise and monthly savings tracking, key performance indicators, and reporting.
Teach, lead and coach cross-functional teams on Lean Six Sigma tools and methodologies. Use data analytics such as statistical process control, process capability analysis, and correlation to make data driven decisions while demonstrating quantitative improvement/impact. Prepare, review, and analyze operational data, reports, and metrics to generate insights, identify trends, isolate bottlenecks, and make informed decisions.
Build a culture of continuous improvement by promoting awareness and buy-in at all levels of the organization. Develop and maintain comprehensive performance dashboards and reports.
Stay current with industry best practices, emerging trends, and technologies related to continuous improvement and benchmark against industry peers and incorporate best practices into the organization.
Education: & Experience:
Bachelor's degree, Process Management, or Operations, with concentration in Engineering preferred.
Four to seven years related experience and/or training Previous experience in a manufacturing environment, preferred in Chemical Manufacturing and/or batch manufacturing operations. Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations, write reports, business correspondence, and procedure manuals and effectively present information and respond to questions from diverse groups.
Solve Practical problems where only limited standardization exists.
Interprets instructions furnished in written, oral, diagram, or schedule form. Work with mathematical concepts and apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Preferred Lean Six Sigma Green Belt or higher certification. Must be able to work in the United States without current or future sponsorship requirements.
This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation/PTO/sick days/parental leave, 401(k), employee stock purchase plan, and Company provided pension plan.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-07-04 23:09:16
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Strategic Sourcing Buyer I/II/Senior is responsible for working cross-functionally with multiple stakeholders to diversify how and where materials are procured, brings new products to market, and tactfully supports operational buying.
This role encompasses planning, data analysis, reporting, negotiating, process development and cost management.
To deliver successful results, the Strategic Sourcing Buyer must develop strong internal/external relationships and knowledge of operations.
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Identify, evaluate, and select new suppliers that meet quality, delivery, and cost objectives
Design and implement scalable sourcing plans
Implement vendor contracts and supply agreements
Manage Bills of Material for new products, work with suppliers and buyers to obtain cost, lead time, minimum order quantity, tooling cost, to support all phases of development and product launch
Collaborate with other Legend Brands buyers and suppliers in the negotiation of contracts, pricing, problem resolution, and new product introduction
Manage and maintain procurement-related data and systems to support reporting and analysis
Execute and develop objectives to improve against department KPIs
Participate in Engineering and New Products Teams as an active member helping to influence best practice sourcing
Work with Quality Assurance to ensure procured materials/services meet technical, business, and quality requirements
Build relationships and collaborate with Sales Operations, Engineering, QA, Materials Management, Product Management, New Product Development, Accounting, and Production
Utilize advanced Excel functionality and D365 to analyze data, implement solutions and create successful business results
Stay up to date on industry trends, best practices, and regulatory changes to ensure compliance and maximize performance
Ability to convey complex information in a clear and concise manner
Report-out to leadership on project timelines, improvement, and status
Performs other related duties as assigned
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Business, Supply Chain, Engineering or related field required
Purchasing Certification is preferred
Previous project management experience preferred
Technical knowledge of HVAC parts and equipment preferred
Strategic Sourcing Buyer
I
Strategic Sourcing Buyer I is the first-level classification in the Strategic Sourcing Buyer series and is intended for individuals with a minimum of 2-5 years related work experience.
As experience and proficiency are gained, assignments will become more varied and difficult; supervision becomes more general rather than direct.
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire:
Lead sourcing events (RFI/RFQ/RFP) for defined categories
Perform total cost of ownership (TCO) and should-cost analyses
Negotiate pricing, terms, and supply agreements
Identify and onboard new suppliers
Moderate autonomy; resolving and escalating complex issues to senior staffThe Strategic Sourcing Buyer I receives close instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required.
Knowledge of MRP/ERP systems.
Skilled at managing vendors while focusing on quality and cost elimination.
Skilled at public speaking, presenting, and leading meetings.
Skilled in completing assignments accurately and with attention to detail.
Ability to travel 10% domestically, 5% internationally.
Ability to interpret engineering drawings and bridge communication between suppliers, engineering, and stakeholders.
Ability to pivot as new product requirements change.
Ability to negotiate.
Ability to communicate effectively in both written and oral form.
Ability to work successfully as a member of a team.
Ability to analyze, organize and prioritize work while meeting multiple deadlines.
Ability to pass a pre-employment background check.
Hiring Range:
Between $86,000 - $97,000/annually - position is incentive eligible.
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background screening
Accepting applications through August 31, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-07-04 23:09:08
-
My client is a world leader in specialised electronic technologies and they are looking for a Senior Quality Engineer based in Portsmouth, Hampshire, to join their growing Quality Engineering team.
The Senior Quality Engineer will report into the Quality Manager and will lead and develop product and process compliance to customer and industry standards to AS9100 / AS9102.
Other duties for the Senior Quality Engineer based in Portsmouth, Hampshire include;
Work on Root Cause Analysis projects with regards to rework / scrap
Completing FAIR reports in line to AS9102 standards
The Quality Manager in Portsmouth will ideally have:
Experience of quality standards relating to defence, military or aerospace AS9100
Experience of electronics manufacturing processes
Exposure to Lean Six Sigma principals, ideally Green Belt certified
APPLY NOW! For the Senior Quality Engineer job located in Portsmouth, Hampshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 or 07961158762 quoting ref.
THD1219.
Alternatively, if this job is not suitable but you are looking for a job within Quality, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Portsmouth, England
Start: ASAP
Salary / Rate: £45000 - £50000 per annum
Posted: 2025-07-04 09:00:55
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished products and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products.
Ensure that quality checks are performed at the required frequency and targets, additionally periodically evaluate target levels, and amend as appropriate.
Regularly audit products and process to ensure standard work is executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management.
Track, report, and reduce manufacturing waste.
Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems.
Research into customer complaints including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order.
Organize and maintain related files, logs, and reports.
Develop quality standards/test/inspection plan for raw materials and finished products (specification, sample size and frequency) as well as a robust training process.
Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
EDUCATION REQUIREMENT:
A High School diploma is required.
Bachelor's degree in quality, chemistry, chemical engineering, durable manufacturing or related field is preferred.
EXPERIENCE REQUIREMENT:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years supervisory experience.
Demonstrated knowledge and experience in quality related programs such as lean, ISO, six sigma, etc.
CERTIFICATES, LICENSES, REGISTRATIONS:
Attain and maintain all related Health and Safety Certifications.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Familiarity with manufacturing regulations and reporting methods.
Knowledge of the production process and team interactions.
Analytical acumen for compiling and analyzing data.
Ability to plan, organize, follow through and prioritize.
Ability to interact with all levels within an organization.
Strong verbal and written communication abilities.
Quality and safety oriented, attention to detail.
Training in quality programs (lean, ISO, Six Sigma).
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $71,506 and $89,382.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-03 23:09:55
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished products and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products.
Ensure that quality checks are performed at the required frequency and targets, additionally periodically evaluate target levels, and amend as appropriate.
Regularly audit products and process to ensure standard work is executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management.
Track, report, and reduce manufacturing waste.
Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems.
Research into customer complaints including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order.
Organize and maintain related files, logs, and reports.
Develop quality standards/test/inspection plan for raw materials and finished products (specification, sample size and frequency) as well as a robust training process.
Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
EDUCATION REQUIREMENT:
A High School diploma is required.
Bachelor's degree in quality, chemistry, chemical engineering, durable manufacturing or related field is preferred.
EXPERIENCE REQUIREMENT:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years supervisory experience.
Demonstrated knowledge and experience in quality related programs such as lean, ISO, six sigma, etc.
CERTIFICATES, LICENSES, REGISTRATIONS:
Attain and maintain all related Health and Safety Certifications.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Familiarity with manufacturing regulations and reporting methods.
Knowledge of the production process and team interactions.
Analytical acumen for compiling and analyzing data.
Ability to plan, organize, follow through and prioritize.
Ability to interact with all levels within an organization.
Strong verbal and written communication abilities.
Quality and safety oriented, attention to detail.
Training in quality programs (lean, ISO, Six Sigma).
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $71,506 and $89,382.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-03 23:09:32
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-27 15:10:11
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-27 15:10:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment. Collect data for process waste reduction.
Edit or create P&IDs.
Work alongside Process Engineers on Capital Expense Projects.
Conduct meetings to communicate information or collaborate on projects.
Serve as a back-up for the Quality Lab Safety.
EDUCATION REQUIREMENT:
Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
No prior experience or training required.
Experience with manufacturing is encouraged but not required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem solving methodology.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-06-25 07:10:27
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment. Collect data for process waste reduction.
Edit or create P&IDs.
Work alongside Process Engineers on Capital Expense Projects.
Conduct meetings to communicate information or collaborate on projects.
Serve as a back-up for the Quality Lab Safety.
EDUCATION REQUIREMENT:
Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
No prior experience or training required.
Experience with manufacturing is encouraged but not required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem solving methodology.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-06-25 07:09:54
-
This Continuous Improvement Engineer role is working with a European Blue Chip Manufacturing Client and world leading manufacturer looking for a skilled Continuous Improvement Engineer to join their Manufacturing Team.The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities.What's in it for you as Continuous Improvement Engineer;
A salary of £50,000
Discretionary KPI Bonus
3x Life Assurance in Salary
Monday - Friday 40 hours per week (8am-4pm)
Group Company Pension
Location - Sevenoaks (approximately 7 miles away, with regular train services)
33 days holiday
Genuine career progression and development opportunities
Main Responsibilities of the Continuous Improvement Engineer.
Deliver CI projects to support the operational and Engineering teams to always improve plant output and quality.
Support the delivery of financial budget aligned with the delivery of KPI's (waste, TOS, efficiency, machine uptime, planned tonnage and accidents).
Leverage and develop site capability on CI tools and techniques (Lean Six-sigma, Kaizen, SMED, 5S, Line-balancing, Centrelines).
Support the maintenance and drive CI in our bakery OEE performance management system.
Support embedding site values as part of CI Strategies.
Demonstrate Health and Safety adherence and cultural behaviours to support site culture.
Essential or desirable skills as the Continuous Improvement Engineer.
Lean Six-Sigma Green Belt or similar relevant qualification in CI - essential.
Previous experience/qualifications in Manufacturing Excellence.
Clear understanding and application of CI tools and techniques, in particular DMAIC, SMED, 5S, Centre Lining, SIC, Kaizen and Line Balancing.
Experience working with production overall Equipment Effectiveness software systems.
Experience in analysing and presenting reports.
Please apply directly for further information regarding the Continuous Improvement Engineer. ....Read more...
Type: Permanent Location: Kent, England
Start: ASAP
Salary / Rate: £49000.00 - £50000.00 per annum + DOE
Posted: 2025-06-24 09:08:22
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: San Antonio, Texas
Posted: 2025-06-23 23:10:13
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2025-06-23 23:10:09
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2025-06-23 23:10:00
