-
An Electronic Manufacturing company is looking for a Test Technician to join their growing team.
They are a growing company with production facility in the UK and global customer base.
They supply products into wide range of vertical markets.
Candidate requirements
Knowledge and Experience in PCB and electronics assembly.
Experience in Testing of PCB operations and assembly.
Experience in documentation of the test procedures and results.
Ability to find component level faults and test them.
....Read more...
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £35000 Per Annum None
Posted: 2025-09-17 21:16:54
-
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools.
You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards.
....Read more...
Type: Permanent Location: Dyce, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £32000 Per Annum None
Posted: 2025-09-17 21:08:46
-
As an Assembly Test Technician you will be responsible for executing assembly tasks, conducting tests, troubleshooting issues, and ensuring the smooth operation of the assembly and testing processes.
Key Responsibilities
Perform assembly tasks to build products or sub-assemblies using hand tools, power tools, and other equipment.
Conduct functional tests, performance tests, and quality inspections on assembled products using specialized testing equipment and tools.
Identify and troubleshoot technical issues that arise during assembly or testing processes.
Use diagnostic tools and problem-solving techniques to determine the root cause of problems and implement appropriate corrective actions.
Qualifications and Skills
Proven experience as an assembly technician, test technician, or a similar role in a manufacturing environment.
Understanding of quality control principles and practices.
Ability to interpret technical documents, diagrams, and test procedures.
Perform assembly, disassembly of complex electro-mechanical products ....Read more...
Type: Contract Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £18 - £27 Per Annum None
Posted: 2025-09-17 18:47:42
-
JOB DESCRIPTION
Specific Requirements:
Works directly with the Production Superintendent, other Production Supervisors, Process Technicians, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Review, check, and signoff on appropriate paperwork for both their own and the Process Technicians and Utility employees under watch. Oversee the training of Process Technicians and Utility employees as well as administer reviews and additional trainings as required.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors, and emergency shutdown procedures. Comprehension of manufacturing techniques vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirement of equipment used. Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Manages inventory reduction per departmental inventory reduction strategy. Understand and demonstrate compliance with HMIS, SDS's, HAZCOM, General Safety, Tank Markings, Plant Signage, HAZWASTE, LO/TO, PSM, PPE protocol, and proper housekeeping. The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High School Diploma or GED. Five years prior manufacturing experience or in a related area. Ability to lift/move up to 50lbs frequently.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursemenApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-17 15:11:29
-
JOB DESCRIPTION
Specific Requirements:
Works directly with the Production Superintendent, other Production Supervisors, Process Technicians, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Review, check, and signoff on appropriate paperwork for both their own and the Process Technicians and Utility employees under watch. Oversee the training of Process Technicians and Utility employees as well as administer reviews and additional trainings as required.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors, and emergency shutdown procedures. Comprehension of manufacturing techniques vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirement of equipment used. Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Manages inventory reduction per departmental inventory reduction strategy. Understand and demonstrate compliance with HMIS, SDS's, HAZCOM, General Safety, Tank Markings, Plant Signage, HAZWASTE, LO/TO, PSM, PPE protocol, and proper housekeeping. The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High School Diploma or GED. Five years prior manufacturing experience or in a related area. Ability to lift/move up to 50lbs frequently.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursemenApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-17 15:10:16
-
Our client are a Market Leading Manufacturing group that are looking to develop their team within the factory with the recruitment of a Quality Technician.
Unrivalled development and learning available to become knowledgeable within moulding and automation manufacturing.What's in it for you as a Quality Technician?
A salary of circa £36,000
Monday - Friday Working 8am-4pm
KPI Bonus
3x Life assurance in salary
Employee welfare program
Enhanced company pension
Key Responsibilities of the Quality Technician;
Assist in planning, executing and documenting R&D Projects, including those focused on product durability and innovation.
Prepare and test samples in accordance with UKAS standards, including freeze/ thaw cycles and other long- term durability assessments.
Collaborate proactively with cross-functional teams to prototype and evaluate new solutions and construction methods.
Initiate, as well as support investigations into product performance and contribute to research programmes replicating field conditions in laboratory settings.
Work on projects aimed at minimising waste in addition to projects assessing the impact of new and related materials
Conduct scheduled calibrations, including plant calibrations, to save money, and maintain lab equipment to ensure accurate and reliable testing.
Maintain and update documentation to support ISO standards.
Provide technical input for development projects
Requirements of the Quality Technician;
Promoting and complying Health and Safety policies to ensure the health and safety of its employees and customers.
Communicating effective awareness of the risks and hazards to all personnel and maintain controls necessary
Developing self within role and participate in and develop from training and developmental activities assigned to oneself.
Establishing self as a subject matter expert in designated technical/professional/operational discipline.
....Read more...
Type: Permanent Location: Maidstone, England
Start: ASAP
Salary / Rate: Up to £36000.00 per annum
Posted: 2025-09-17 15:02:32
-
Field Service Engineer Birmingham £33,000 - £37,000 Basic + Overtime (OTE £45,000+) + Company Van/Allowance + 25 Days Holiday + Pension + Healthcare + Immediate Start
Are you a Field Service Engineer with strong mechanical and electrical maintenance skills and enjoy variety in your work? Are you looking for a role that gives you the opportunity to travel across the UK and abroad while working on cutting-edge material handling systems? If so, this is a fantastic opportunity to join a global market leader in conveyors and automation.
This is a great chance to be part of a growing service division as a Field Service Engineer where your technical skills and problem-solving ability will make a real impact.
You'll gain exposure to high-profile clients in logistics, e-commerce, retail and manufacturing, while enjoying excellent training and long-term career prospects.
Your Job As A Field Service Engineer Will Include:
* Installing, servicing and maintaining conveyors and material handling equipment
* Carrying out preventative maintenance and breakdown repairs
* Training customers and technicians on safe use and maintenance
* Producing service reports and ensuring compliance with H&S standards
* Supervising installation projects when required
As A Field Service Engineer You Will Have:
* NVQ/Apprenticeship or time served in mechanical/electrical engineering
* Hands-on experience in service, maintenance and installations
* Good communication skills and confident working with customers
* Flexible approach to travel and overnight stays 1 week out of 4
* Full UK Driving Licence
Apply now or call Billy on 07458 163030 for immediate consideration!
Keywords: field service engineer, mechanical maintenance, electrical maintenance, conveyor systems, installation engineer, breakdown repairs, preventative maintenance, PPM, material handling, automation, distribution centres, e-commerce, retail, manufacturing, telescopic conveyors, powered conveyors, flexible conveyors, international travel, UK travel, NVQ mechanical engineering, NVQ electrical engineering, customer training, fault finding, technical service engineer, service and maintenance, installation projects, maintenance engineer
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Salary / Rate: £34000 - £36000 per annum + + OTE £45'000 + Van + Healthcare + Travel
Posted: 2025-09-17 09:50:18
-
Assembly Fitters - Full Training Provided Location: South Elmsall (Easily accessible from Doncaster, Barnsley & Wakefield) Salary: £24,126 per year Hours: Monday - Thursday, 6:30am - 4:30pm (3-day weekends!) Contract: Permanent after 12-week probationWe are recruiting Assembly Fitters to join a growing manufacturing business with a strong order book and exciting future plans.
This is an excellent opportunity for individuals looking to build a long-term career in a clean, organised, and modern workshop. Full training is provided - so if you're confident using hand and power tools, enjoy working as part of a team, and have a positive attitude, this could be the perfect role for you.Duties of the Assembly Fitter position
Assembling vehicles on a production line
Using hand and power tools (full training provided)
Following detailed build instructions
Working as part of a supportive team in a modern workshop
What is required for the Assembly fitter role.
Previous experience in a manufacturing or production environment is desirable but not essential
Comfortable using hand and power tools (or keen to learn)
Team player with a proactive and positive approach
We would love to hear from candidates with backgrounds such as: Vehicle Builder, Coachbuilder, Vehicle Mechanic, Vehicle Technician, Mechanical Assembler, Maintenance Engineer, Production Operative, Joiner, Manufacturing Technician, or similar.
Benefits
Competitive salary - £24,126 per year
3-day weekends - 4-day working week
Permanent contract after probation
Immediate starts available following interview
Clean, modern, and organised workshop
Career development in a growing business.
If you would like a private chat about the role, please contact Sophie Ranson at E3 Recruitment ....Read more...
Type: Permanent Location: Pontefract, England
Start: ASAP
Salary / Rate: Up to £24126.00 per annum
Posted: 2025-09-16 15:20:42
-
Senior Glazing Technician - Optical Lab Job in Lancaster, Lancashire Full Time | £28,000 - £32,000| Leading Optical Manufacturer
Zest Optical are working in partnership with a UK-leading lens manufacturer to recruit a Senior Glazing Technician for their state-of-the-art optical lab based in Lancaster, Lancashire area.
This is an exciting opportunity for an experienced Glazing Technician or Glazing Supervisor to lead a team in delivering high-volume, high-quality lens glazing and production services to Opticians across the UK.
Role Overview - Senior Glazing Technician
Ensure efficient and accurate production of high-quality ophthalmic lenses
Help drive continuous improvement initiatives
Work with the Lab Manager to implement innovative production strategies, ensuring quality and precision
Train on the MEI machine with full training provided
Monday to Friday, 9am-5pm
Competitive salary between £28,000 to £32,000 DOE
Join an employee owned company which empowers and rewards its employees at every opportunity
Candidate Requirements
Strong knowledge of lens manufacturing, optical glazing, and optical lab operations
Previous management experience in a fast-paced, high-volume optical lab environment
SMC (Tech) qualification is desirable
Quality-focused with a high level of accuracy and attention to detail
Excellent decision-making and task prioritisation skills
Apply Now Are you ready to lead in one of the UK's top optical labs? If you're an experienced Glazing Technician, Optical Production Supervisor, or Lab Team Leader, we want to hear from you. Click Apply Now to take the next step in your optical career. ....Read more...
Type: Permanent Location: Lancaster, England
Salary / Rate: £28000 - £32000 per annum
Posted: 2025-09-16 15:13:48
-
JOB DESCRIPTION
Position Summary: The Process Technician will be responsible for production assigned duties.
This includes but is not limited to batch and process manufacturing, compliance responsibilities, inventory control, bulk material handling, and packaging.
There are three categories for a Process Technician; C, B, & A where A is most senior and technically proficient.
In addition, Process Technician A will be required as needed to fill in for the duties of Production Supervisors.
Process Technician A will have a full understanding and ability to perform assigned tasks as well as assist Level B & C as well as Utility with their assigned task.
Specific Requirements:
Works directly with Production Supervisors, other Process Technician, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Have good command and general working knowledge of manufacturing equipment. Comprehension of manufacturing techniques and demonstrates safety compliances Executes tasks and project responsibilities as outlined and assigned from the compliance calendar, production worklist, expected delivery report, and verbal / written instructions from Supervisors and Management.
Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Assists in management and development of processes and safety programs Manages inventory reduction per departmental inventory reduction strategy Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies and demonstrates compliance through work practice. The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
HS Diploma Minimum of 2 years related experience. Ability to lift/move up to 50 lbs daily and occasionally life/move up to 75 lbs.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:25
-
JOB DESCRIPTION
Position Description: This position is responsible for performing real-time trouble shooting and repair along with general assembly and chemical plant improvements.
This position also has direct responsibilities for preventative maintenance as well as work and duties being compliant with the PSM standard.
Specific Requirements:
Works with Management, the Plant Superintendent and Production Supervisors, and technicians to schedule and conduct necessary repairs on a prioritized basis. Development and perpetuation of the prioritized maintenance schedule of repair, PM's, and new installation projects. Schedule outside contractor work, monitor their work status, complete the contractor checklists and verify cost estimates vs.
invoices. Conducts pipe work fabrication and welding. Completes maintenance and repairs on boilers, air compressors, chillers, cooling tower fans and circulation pumps, generators, as well as respective checklists. Repairs chemical hoses, reactors, tanks, lines and other miscellaneous plant equipment. Executes tasks and project responsibilities from maintenance meetings, daily updates, and compliance & PM scheduled activities does so with independent time management that may result in change of tasks planned for the workday. Provides on call and over-times support as needed in the evenings and other required times designated by management. Suggests improvements for safety and compliance.
Background Requirements:
High School Diploma or GED and 5 years' experience in maintenance field Minimum 5 years experience and demonstrated proficiency with fluid transfer pumps of hazardous chemicals, and other chemical manufacturing equipment Ability to lift/move up to 50lbs frequently and occasionally lift and move up to 75lbs
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:24
-
JOB DESCRIPTION
Position Summary:
Responsible for production and compliance assigned duties.
This includes but is not limited to batch and process manufacturing, compliance responsibilities, inventory control, bulk material handling, and packaging.
Essential Functions:
Works with Production Supervisors, Process Technicians, other Utility, and the Corporate Compliance Manager in the safe handling of the equipment and chemical intermediates in both storage and use in production Understand and demonstrate compliance with HMIS, SDS's, HAZCOM, General Safety, HAZWASTE, LO/TO, PSM, PPE protocol, and proper housekeeping Management of Wastewater including monitor and reporting of tank volumes, compliant and effective loading of the outbound water trailers, sampling tanks and trailers, neutralization when necessary, and weight tickets for outbound trailers Management of Storm Water including monitor and reporting of storm water in containment areas and reporting to Corporate Compliance Manager, Sampling Storm Water and logging samples into laboratory, compliant and effective discharge of the Storm Water, and completing the cycle of required documentation including the Storm Water checklist back to Corporate Compliance Manager Housekeeping specific assigned areas and duties Maintain hazardous waste satellite and accumulations areas such that they are compliant with all regulations, including monitoring containment pallets and emptying via proper disposal when necessary as well as respective Satellite and Accumulation Area checklists for compliance.
Minimum Requirements:
High school diploma or GED Minimum 2 years' experience in the field
Physical Requirement:
Ability to lift/move up to 75 lbs.
frequently Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:24
-
JOB DESCRIPTION
Position Description: This position is responsible for performing real-time trouble shooting and repair along with general assembly and chemical plant improvements.
This position also has direct responsibilities for preventative maintenance as well as work and duties being compliant with the PSM standard.
Specific Requirements:
Works with Management, the Plant Superintendent and Production Supervisors, and technicians to schedule and conduct necessary repairs on a prioritized basis. Development and perpetuation of the prioritized maintenance schedule of repair, PM's, and new installation projects. Schedule outside contractor work, monitor their work status, complete the contractor checklists and verify cost estimates vs.
invoices. Conducts pipe work fabrication and welding. Completes maintenance and repairs on boilers, air compressors, chillers, cooling tower fans and circulation pumps, generators, as well as respective checklists. Repairs chemical hoses, reactors, tanks, lines and other miscellaneous plant equipment. Executes tasks and project responsibilities from maintenance meetings, daily updates, and compliance & PM scheduled activities does so with independent time management that may result in change of tasks planned for the workday. Provides on call and over-times support as needed in the evenings and other required times designated by management. Suggests improvements for safety and compliance.
Background Requirements:
High School Diploma or GED and 5 years' experience in maintenance field Minimum 5 years experience and demonstrated proficiency with fluid transfer pumps of hazardous chemicals, and other chemical manufacturing equipment Ability to lift/move up to 50lbs frequently and occasionally lift and move up to 75lbs
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:23
-
JOB DESCRIPTION
Position Summary:
Responsible for production and compliance assigned duties.
This includes but is not limited to batch and process manufacturing, compliance responsibilities, inventory control, bulk material handling, and packaging.
Essential Functions:
Works with Production Supervisors, Process Technicians, other Utility, and the Corporate Compliance Manager in the safe handling of the equipment and chemical intermediates in both storage and use in production Understand and demonstrate compliance with HMIS, SDS's, HAZCOM, General Safety, HAZWASTE, LO/TO, PSM, PPE protocol, and proper housekeeping Management of Wastewater including monitor and reporting of tank volumes, compliant and effective loading of the outbound water trailers, sampling tanks and trailers, neutralization when necessary, and weight tickets for outbound trailers Management of Storm Water including monitor and reporting of storm water in containment areas and reporting to Corporate Compliance Manager, Sampling Storm Water and logging samples into laboratory, compliant and effective discharge of the Storm Water, and completing the cycle of required documentation including the Storm Water checklist back to Corporate Compliance Manager Housekeeping specific assigned areas and duties Maintain hazardous waste satellite and accumulations areas such that they are compliant with all regulations, including monitoring containment pallets and emptying via proper disposal when necessary as well as respective Satellite and Accumulation Area checklists for compliance.
Minimum Requirements:
High school diploma or GED Minimum 2 years' experience in the field
Physical Requirement:
Ability to lift/move up to 75 lbs.
frequently Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:23
-
JOB DESCRIPTION
Position Summary: The Process Technician will be responsible for production assigned duties.
This includes but is not limited to batch and process manufacturing, compliance responsibilities, inventory control, bulk material handling, and packaging.
There are three categories for a Process Technician; C, B, & A where A is most senior and technically proficient.
In addition, Process Technician A will be required as needed to fill in for the duties of Production Supervisors.
Process Technician A will have a full understanding and ability to perform assigned tasks as well as assist Level B & C as well as Utility with their assigned task.
Specific Requirements:
Works directly with Production Supervisors, other Process Technician, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Have good command and general working knowledge of manufacturing equipment. Comprehension of manufacturing techniques and demonstrates safety compliances Executes tasks and project responsibilities as outlined and assigned from the compliance calendar, production worklist, expected delivery report, and verbal / written instructions from Supervisors and Management.
Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Assists in management and development of processes and safety programs Manages inventory reduction per departmental inventory reduction strategy Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies and demonstrates compliance through work practice. The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
HS Diploma Minimum of 2 years related experience. Ability to lift/move up to 50 lbs daily and occasionally life/move up to 75 lbs.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-09-16 15:10:06
-
A Service Engineer paying £36,000, Overtime paid at 1.5, Van, Fuel Card, Laptop, Mobile phone, private medical insurance, full training is given.
8am - 5pm,(Monday to Thursday early finish on a Friday).
A large ‘blue chip' Multinational company are recruiting for a Service to work ‘on site' one of their customers manufacturing facilities.
The functions of the role would be to inspect, repair, provide preventative maintenance to compressors, blowers and pumping systems upon vehicles - full training given.
Location of the service Engineer position: Aylesbury A van is provided for the role as occasional breakdowns would need to be attended to.
We would be very keen to speak to people that have experience working in the following roles: HGV Fitter, Plant Fitter, Hydraulic fitter, Vehicle technicians, Aircraft Engineers, Mechanical fitter, Compressor engineer, HGV Technicians.
Water treatment and pump backgrounds.
Main of the Service Engineer role:
Provide an after-sales product support
Repair equipment and vehicles at depot or on-site as required to ensure conformance with manufacturer's specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times.
Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including reports, inspections, calibrations checks and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings.
We would be very keen to speak to people who have experience with:
Diagnostic analysis, repairs or preventative maintenance
Knowledge of hydraulics and pneumatics
Providing breakdown assistance both at the depot and off-site at vehicle location.
Other responsibilities include but are not limited to: onboard vehicle smart system maintenance, vessel integrity, light body repairs, and general vehicle repair.
Benefits of the Service Engineer position: £36,000Overtime paid at 1.5.
Van Laptop Mobile phone private medical insurance, full training given Alternatively, if you want a private chat about the service Engineer position before submitting your application then please call or email RODGER MORLEY at E3 Recruitment.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Salary / Rate: Up to £36000.00 per annum
Posted: 2025-09-15 10:52:21
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-09-13 23:09:59
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-09-13 15:14:10
-
Electronic PCB Production Technician required to work on the assembly, testing and calibration of small batches of electronic devices used on cars and autonomous electric vehicles.
This will include fault diagnosis and hardware repair.
You will have recent experience of electronics manufacturing or PCB, instrumentation or similar product servicing.
Key skills
Electronics and circuit design knowledge.
Soldering, surface mount and through hole.
Fault find to component level.
Test and measurement equipment.
Ideally qualified to ONC/HNC level preferably in Electronics
Full driving license is essential for this role! ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £35000 Per Annum None
Posted: 2025-09-13 11:01:53
-
Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components.
You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools.
Experience and skills required
Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies.
Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2)
Proven ability to work successfully within design constraints.
Electronic tools and general test equipment competence.
Producing deliverable items from full drawing packs to relevant IPC standards.
Role responsibilities
Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly.
Fault finding and rectification at system and component level. ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £42000 Per Annum None
Posted: 2025-09-13 10:41:34
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-09-12 23:08:44
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-09-12 23:08:42
-
The Facilities Technicians are responsible for developing, providing and maintaining a high standard of building energy and manufacturing services.
Key Responsibilities:
1.Implement planned preventative maintenance.
This may entail working with approved contractors to arrange for them to come to site to conduct the work.
2.
Carry out day-to-day reactive repair and maintenance tasks across all buildings where required and within individual competence
3.
Raise order requests with approved service suppliers and contractors.
Quotations to be passed to the Facilities Manager and on approval to the Facilities Administrator for SAP submission.
4.
Ensure electronic databases and files are updated with completed work on a daily basis
Qualities and skills required:
1.Recognized electrical qualification such as to IEE wiring regulations or Part P Electrical Safety
3.Relevant industrial experience gained by providing facility maintenance in a manufacturing workplace
4.Electrical maintenance experience
5.Mechanical maintenance experience advantageous.
6.HVAC experience advantageous
7.Driving license required
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £30000 Per Annum None
Posted: 2025-09-12 18:35:53
-
JOB DESCRIPTION
Essential Functions
Performs all required testing on raw materials, in-process, and finished goods
Performs first piece inspection on all product lines to ensure proper setup of filling and ink-jet coding equipment
Audits manufacturing process daily for compliance with all product quality parameters
Records all test data, properly completing all necessary reports, filling, and maintaining test data
Test and assist in the investigation of product complaints
Assists in the evaluation of obsolete, rejected and returned products for reprocessing
Maintains neatness and orderliness of the Quality Control test lab
Reports all spills and leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and material shortages immediately to the Production Supervisor
Minimum Requirements
High school diplomas and/or 5 years QC experience in a manufacturing environment
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone.
This position requires consistent wearing of a lab coat, safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $18.00/hour and $25.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2025-09-12 15:10:57
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
We are looking for a Program Administrator.
General Description:
The Program Administrator is responsible for supporting the National Account Team Lead and other Program Managers in a behind-the-scenes type of role.
The Program Administrator should be a very detail oriented and organized professional who understands the importance of deadlines, communication, and customer-specific requirements.
The Program Administrator will be responsible for working on multiple Programs (service contracts) and executing on the day-to-day requirements as outlined by the National Account Team Lead and/or the Program Manager.
Essential Duties and Responsibilities:
Writing proposals for customer accounts.
Understanding customer specific requirements (applicable discounts, labor/material break out, taxes, etc.) File/document integrity - use internal web resources (eBuilder) and local file storage to maintain document and file storage integrity. Understanding different labor rates for each WTI region(s). Understanding different WTI service types and how they are priced. Managing multiple leak response programs.
Tracking leak calls and WTI service response times.
Managing subcontractor invoices and completion paperwork.
Working with regional administrators to re-dispatch leak calls, get progress updates, etc.
Working with WTI technicians to request NTE increases on individual leak responses if applicable. Tracking and invoicing leak service calls.
Delivering invoices to customer specific locations (work order systems, customized email addresses, etc.) Tracking inspection programs.
Working in internal systems to track roof inspection data.
Maintaining a master inspection tracker showing where small pieces of entire programs are in relation to completion. Maintain a weekly schedule to WTI field technicians and Program Manager (to share with customer). Inputting budgets, editing, and categorizing recommendations from WTI field technicians.
Submitting reports and files for internal quality control.
Editing reports as needed based on feedback from quality control personnel.
Delivering reports to Program Manager/customer.
Customer portals Updating customer work order status with ETA Updating customer invoice system with Invoice Special Project Assignments Be accountable for managing your day based on tasks set forth by Program Manager.
Competencies:
Technical Knowledge of all Services that WTI offers (able to read through a price book and understand the information) Communication Superior written, oral, and digital communication skills. Computer Literacy Outlook Email Microsoft Teams Microsoft Excel (must have) SmartSheet SAP
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-12 15:10:53
