-
Offshore Operations Superintendent - Permanent - London
Navis Consulting are looking for an Offshore Operations Superintendent for their submarine cable client.
The Offshore Operations Superintendent represents the company's Project Marine Manager (PMM) and the company's interests during operations in all aspects of operations and offshore installation.
MAIN RESPONSIBILITIES & ACTIVITIES
Ensuring the integrity of the supplied submarine fibre-optic cable products is maintained throughout the installation operation
Review previous operational meeting minutes to assess the vessel for project readiness, reporting on the technical status of the lay spread equipment
Ensuring the Health & Safety of the team, and ensuring the sub-contractor complies with the contractual HSE requirements, through toolbox meetings and risk assessments
Monitoring and reporting daily progress of the operation, ensuring the contractually agreed plan of work, procedures, controls and work methods are followed and adhered to
Interfacing with the Marine Offshore Operations Manager (OOM), the vessel Master/Operations Manager agreeing all operational and technical matters, to ensure a favorable outcome for all aspects of the operation (HSE, Technical and Commercial)
Reacting to dynamic situations, contributing to identifying solutions to unplanned events and implementing the necessary changes to the work plans to ensure that the safety of the operations is maintained by all involved, and to ensure a technically acceptable outcome to the company and the Client.
Communicating the agreed solution to the PMM ensuring the right methods are being used to implement the solution
IIRs/MIRs all incidents must be reported to the PMM.
A separate incident report will be completed for each incident irrespective of whether the subcontractor also submits an incident report.
This is an internal report and should only be distributed within the company
Report any near miss/accident to any personnel or contractors in accordance with the Vessel's own ISM approved Accident Report procedure and ensure these are included in the daily report back to the company.
The PMM must ensure that all such accident reports are forwarded to the appropriate site Occupational Health Department
Ensuring the Client Representative is kept informed of the project status and changes to activities that are carried out in the field of operations and coordinating with the Client Representative on any parallel in-field activities that are being carried out at the same time
Highlighting any issues arising from the onboard fibre-optic cable Jointing and Testing teams to the PMM
On completion of an operation hold a wash-up meeting with all the relevant parties onboard and issue a report/minutes to the OOM and Marine Engineering team plus agreed distribution list
EXPERIENCE & SKILLS REQUIRED
Marine operations experience as Master, Chief officer or surveyor Team Leader within the cable installation industry
Bachelor degree in a relevant field
Minimum 5 years of relevant offshore installation operation experience
Maritime experience
Extensive familiarity and understanding of offshore installation and QHSE processes
Ability to identify and manage processes coordination and solutions for multiple stakeholders across the marine operations activity
Highly developed documentation management skills
Excellent computer skills are required, high level familiarity with MS Office Suite of programs including Microsoft Project
Excellent written and oral communication skills
Ability to word autonomously and in a cross-functional team environment
Ability to prioritize workload and work under pressure
For more information please call Jack on +44 (0) 2392 322384 or email jbaker@navis-consulting.com
Navis is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: London, England
Posted: 2025-06-06 13:24:28
-
Marine Engineer Plymouth £40,000 - £45,000 Basic + Van + 33 Days Holiday + Great Team Culture + Flexible Working + OEM Training + IMMEDIATE START
Are you a skilled Marine Engineer with experience in the leisure boating sector? Join a long-established, family-feel marina service business with a loyal team, strong customer base, and exciting growth plans.
Enjoy flexible working, factory and manufacturer training, and a culture built on trust and long-term careers.
If you're hands-on, self-sufficient Marine Engineer and ready to take ownership of your work, this is a great opportunity to grow with a company that values loyalty and technical excellence.
The Role Will Include:
Service and maintenance of leisure vessels - from fishing boats to luxury yachts Using diagnostics, software, and technical tools for fault-finding and repairs Customer interaction and on-site service within the Plymouth area Supporting growth in a newly acquired division of the business
The Ideal Candidate Will Have:
Minimum 3 years' experience in marine leisure engineering Confident with diagnostics, computer systems, and Excel Presentable and customer-facing, with strong problem-solving skills Full UK driving license Able to work independently and make decisions on-site
Be part of a stable and expanding team where your work is valued and your growth is supported.
If this sounds like you apply now or call Billy on 07458163030Keywords: Marine Engineer Leisure Boats Boat Service Engineer Marine Technician Yacht Maintenance, Plymouth, South West, Devon This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Plymouth, England
Start: ASAP
Salary / Rate: £40000 - £45000 per annum + + Van + Flexible Working + OEM Training
Posted: 2025-06-05 17:18:13
-
Marine Fabricator - £31.31/hr | Plymouth | 26-Week Contract
Join one of the UK's most prestigious engineering projects at Devonport Dockyard in Plymouth.
We're looking for skilled Marine Fabricators to support major Warship and Submarine programmes, delivering critical structural repairs, modifications, and fabrication work.
This 26-week contract offers £31.31/hr (inclusive rate), with a 35-hour workweek (Mon-Fri, early finish Fridays).
You'll work from detailed engineering drawings, manufacturing and altering structures across various metals and thicknesses.If you're time-served, hold a relevant Level 3 qualification, and have experience in marine or heavy engineering environments, we want to hear from you.
Prior experience with Royal Navy ships, submarines, or commercial vessels is highly desirable but not essential.
This is a great opportunity to contribute to projects of national significance.
Candidates will need to go through SC clearance or BPSS.
....Read more...
Type: Contract Location: Plymouth, England
Start: asap
Duration: 26 weeks
Salary / Rate: Up to £31.31 per hour
Posted: 2025-06-05 09:20:21
-
Position: Design Engineer
Job ID: 3423/5
Location: Segensworth, Hampshire
Rate/Salary: £50,000 - £60,000
Benefits competitive
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit www.hsbtechnical.com for a full list of our current vacancies.
We work with multiple leading businesses across the UK and overseas to recruit for both permanent and contract roles.
The below job description outlines the position of: Design Engineer
Typically, this person will be responsible for the detailed design and integration of mechanical subsystems and components within marine platforms.
The role focuses strongly on manufacturability and material performance, contributing to the creation of design solutions for structural and functional hardware such as hatch hinges, locking mechanisms, jigs, and composite manufacturing documentation.
This role forms a critical part of designing and developing high-speed craft for the Ministry of Defence, utilising cutting-edge technology inspired by Formula 1 and Formula 2 racing boat industries to ensure world-class performance and innovation.
About the company:
HSB Technical’s client is a forward-thinking and well-established organisation specialising in the design and manufacture of advanced high-speed maritime craft for the MOD.
Their expertise is rooted in applying the latest advancements and design philosophies from the Formula 1 and Formula 2 racing boat sectors to develop cutting-edge vessels that set new standards in speed, reliability, and capability.
Duties and responsibilities of the Design Engineer:
• Perform mechanical design of subsystems including hatch hinges, locks, jigs, and related components, ensuring robust, manufacturable solutions.
• Develop composite production materials such as ply books and mould geometries, supporting efficient fabrication processes.
• Design and integrate routing for hydraulics, propulsion, water systems, and other mechanical subsystems within the marine platforms.
• Apply personal judgement and initiative to solve day-to-day design challenges and procedural obstacles effectively.
• Maintain proficiency with all relevant IT systems and software, including Siemens NX CAD, ensuring high-quality design output.
• Act ethically and with integrity, representing the best interests of the business at all times.
• Maintain professional and supportive relationships with team members, subcontractors, suppliers, and other departments to meet business objectives.
• Manage time effectively to maximise productivity and meet project deadlines.
• Carry out any other duties as assigned by senior management or authorised representatives.
Health & Safety responsibilities:
• Ensure the working environment is clean, safe, and compliant with health and safety policies and best practices.
• Confirm all equipment used is safe, within electrical test date, and equipped with appropriate guards and interlocks.
• Follow company health and safety procedures to ensure personal and colleague safety.
• Report any health and safety hazards or violations promptly to supervisors or the QHSE Manager.
• Use and maintain personal protective equipment (PPE) and workwear, reporting replacements as necessary.
Qualifications and requirements for the Design Engineer:
Essential skills, knowledge and experience:
• Proficient use of Siemens NX CAD, with exposure to Teamcenter PLM and Simcenter Nastran highly desirable.
• Expertise in design for manufacture of composite and metallic parts, including fabricated or milled components.
• Strong knowledge of material selection principles.
Desirable skills, knowledge and experience:
• Experience designing platforms for small batch series production in marine, automotive, motorsport, or aerospace sectors.
• Marine design experience including mechanical design, naval architecture, structures, or marine engineering.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Southampton, England
Start: 25/08/2025
Duration: Permanent
Salary / Rate: £50000 - £60000 Per Annum
Posted: 2025-06-04 14:54:34
-
Position: Principal Marine Engineer
Job ID: 3423/4
Location: Segensworth, Hampshire
Rate/Salary: £50,000 - £65,000
Benefits: Competitive
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit www.hsbtechnical.com for a full list of our current vacancies.
We work with multiple leading businesses across the UK and overseas to recruit for both permanent and contract roles.
The below job description outlines the position of: Principal Marine Engineer
Typically, this person will be responsible for the specification, integration, and detailed design of primary onboard maritime systems for a portfolio of vessels ranging from 2 to 20 metres.
These are cutting-edge power craft projects primarily for the Ministry of Defence, employing advanced technology inspired by Formula 1 and Formula 2 racing powerboats, resulting in innovative, high-performance platforms.
The role combines technical expertise with hands-on design work using Siemens NX to contribute directly to system layouts, production data, and project documentation.
About the company:
HSB Technical’s client is a leading and innovative business recognised for delivering state-of-the-art high-speed power craft for the MOD.
Their technology draws heavily on the high-performance principles of Formula 1 and Formula 2 powerboat engineering, setting the standard for next-generation defence maritime platforms.
Duties and responsibilities of the Principal Marine Engineer:
• Specify, integrate, and design primary onboard systems including propulsion, bilge, fire, hydraulics, and HVAC for vessels between 2 and 20 metres.
• Develop detailed cable and piping routing using Siemens NX master general arrangements (GA).
• Produce and maintain primary equipment lists, P&IDs (Piping and Instrumentation Diagrams), and input into Materials Resource Planning (MRP) Bills of Materials (BOM).
• Use initiative and expert judgement to devise effective solutions to technical challenges in system design and integration.
• Maintain proficiency with relevant IT and technical tools essential for detailed engineering design and documentation.
• Act with professionalism, integrity, and in the best interests of the business at all times.
• Collaborate closely with internal teams, sub-contractors, and suppliers to ensure design compliance and production readiness.
• Liaise directly with shipyard shop floors to manage design changes, updates, and as-built documentation for in-house and outsourced work.
• Manage time efficiently to maximise productivity and meet demanding project deadlines.
• Carry out additional duties as requested by senior management to support business growth and innovation.
Health & Safety responsibilities:
• Maintain a clean, safe working environment compliant with health and safety policies and best practices.
• Ensure all equipment used is safe, electrically tested, and has all necessary guards and interlocks in place.
• Adhere to company safety processes to protect personal and colleague wellbeing.
• Report any health and safety hazards or violations to line management or the QHSE Manager immediately.
• Use and maintain PPE/workwear, reporting replacements as required.
Qualifications and requirements for the Principal Marine Engineer:
Essential skills, knowledge and experience:
• Proven experience in maritime systems design and integration across propulsion, bilge, fire, hydraulics, HVAC, and related systems.
• Competence modelling systems and producing production information using Siemens NX.
• Experience liaising with relevant regulatory bodies to ensure compliance.
• Strong ability to work closely with shipyard shop floors to manage design changes and “as fit” updates both in-house and outsourced.
Desirable skills, knowledge and experience:
• 3D CAD modelling experience in Siemens NX.
• Electrical system design knowledge.
• Familiarity with Teamcenter Product Data Management (PDM).
• Experience in configuration control and documentation management.
• Mentoring and development of junior engineering staff.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Southampton, England
Start: 25/08/2025
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum
Posted: 2025-06-04 14:50:25
-
Position: Module Integration Design Engineer
Job ID: 3423/2
Location: Segensworth, Hampshire
Rate/Salary: £65,000
Benefits:
• Private Medical
• Life Insurance
• Company Pension
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Module Integration Design Engineer
Typically, this person will work closely with a multi-disciplinary team to develop and integrate modular payloads onto advanced maritime platforms.
You will play a key role in designing high-performance solutions for modular marine craft used in defence and commercial operations.
This is a fantastic opportunity for someone passionate about mechanical design and modular system integration.
HSB Technical’s client is an established and highly regarded MOD specialist, recognised for delivering high-performance craft for defence and specialist maritime applications.
With a growing order book and an expanding product range, they are building a dedicated module integration team to support scalable, multi-role vessel systems.
While marine design experience is highly desirable, the company is also open to applicants from other engineering sectors such as automotive or aerospace, especially where experience includes systems integration, complex assembly design, or lightweight structural work.
Duties and responsibilities of the Module Integration Design Engineer:
• Perform Space, Weight and Power (Electrical) – SWAP(E) assessments for integration of diverse payload modules
• Develop 3D CAD concepts and detailed models using Siemens NX
• Generate manufacturing and assembly drawings for both prototype and production builds
• Design components and interfaces using appropriate materials (metals and composites), ensuring system-level integration
• Produce high-quality concept renderings and visuals for customer and marketing use
• Participate in design and integration workshops with both internal stakeholders and external payload suppliers
• Collaborate with multidisciplinary teams including systems, electrical and control engineering to achieve functional solutions
Qualifications and requirements for the Module Integration Design Engineer:
Essential:
• Degree or equivalent experience in Mechanical Engineering, Product Design, or similar field
• Proficiency with 3D parametric CAD (preferably Siemens NX)
• Understanding of structural design principles and SWAP(E) analysis
• Experience designing with metallic and composite materials
• Good time management and the ability to deliver to tight deadlines
• Effective communicator and team player
Desirable:
• Background in marine design or naval/military engineering
• Familiarity with rendering tools, VR environments, or immersive model interrogation
• Experience in automotive or aerospace engineering design
• Competence with 3D printing and design for additive manufacturing
• FEA experience in composites or metals
Key Behaviours:
• Organised and able to independently manage tasks and timelines
• Clear communicator with the ability to convey technical ideas effectively
• Collaborates well in multi-disciplinary teams
• Proactive problem-solver
• High standard of attention to detail
• Maintains professional conduct and respects confidentiality
General Accountabilities and Responsibilities:
• Apply initiative and practical thinking to overcome design challenges
• Maintain fluency in engineering and design software systems
• Act with integrity and align with the organisation’s values
• Support team members and business objectives with a positive mindset
• Complete any additional duties required by senior management
• Maximise productivity through effective time management
Health & Safety Responsibilities:
• Ensure the working environment is clean, safe, and compliant with company policies
• Operate tools and equipment responsibly and ensure safety devices are in place
• Follow all Health & Safety procedures for personal and team safety
• Immediately report potential hazards to management or the QHSE team
• Maintain and use PPE correctly and report wear or damage as needed
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Southampton, England
Start: 25/08/2025
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum
Posted: 2025-06-04 14:37:57
-
4 Day working week (Monday to Thursday), 8% combined pension scheme, 33 holidays, flexible working hours and the opportunity to produce components for a number of high profile industries are just a few of the perks that the CNC Turner will enjoy whilst working with this highly respected manufacturing organization.This organization is an end-to-end engineering business which supplies critical flow-control products to a number of high-profile industries, including Defense, Oil & Gas, and Chemical Processing.
Since their establishment 75 years ago, this family owned business now employs over 60 people at their Keighley based engineering facility.Because of their ever growing order book, this impressive manufacturer are actively searching for a CNC Turner to join their team on a permanent basis.The successful CNC Turner will easily be able to commute to the NORTH BRADFORD facility from surrounding towns & cities, including Keighley, Ilkley, Skipton, Colne, Nelson, Burnley, Barnoldswick, Shipley and northern parts of Halifax.Key Responsibilities of the CNC Turner will include:
Programming, setting and operating a variety of Machining Centres or Lathes in order to produce complex components for use in the Naval Marine, Oil & Gas and Chemical sectors
Reading, interpreting and working directly from engineering drawings and technical diagrams, ensuring that strict quality tolerances are achieved in-line with specification
Self-inspection, carrying out mechanical/visual inspection using various measuring instruments
Actively participating in continuous improvement activities and identifying process improvements as necessary
For the CNC Turner role, we are keen to receive CVs from individuals who possess:
IDEAL NOT ESSENTIAL - Formal qualifications within a relevant discipline (Apprenticeship, HNC, HND, BTEC/NVQ/City & Guilds Level 3 etc.)
Stable & relevant experience working in a similar role, with Milling and/or Turning experience
The ability to generate new programs using any machine control (Fanuc, Mazatrol, Heidenhain, Siemens, Prototrak, HAAS etc.)
In return, the CNC Turner will receive:
Renumeration: Up to £33,522.84 per annum (£16.53 per hour)
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 8% Combined contribution (4% matched)
Working Hours: 39 Per week spread across 4 days - Monday to Thursday - 06:00 to 17:00
Opportunity to work frequent overtime, paid at 150%
To apply for the CNC Turner position, please click “Apply Now” and attach a copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information ....Read more...
Type: Permanent Location: Bingley, England
Start: ASAP
Salary / Rate: Up to £34192.0800 per annum + + 33 Holidays
Posted: 2025-06-04 13:31:21
-
4 Day working week (Monday to Thursday), 8% combined pension scheme, 33 holidays, flexible working hours and the opportunity to produce components for a number of high profile industries are just a few of the perks that the CNC Miller will enjoy whilst working with this highly respected manufacturing organization.This organization is an end-to-end engineering business which supplies critical flow-control products to a number of high-profile industries, including Defense, Oil & Gas, and Chemical Processing.
Since their establishment 75 years ago, this family owned business now employs over 60 people at their Keighley based engineering facility.Because of their ever growing order book, this impressive manufacturer are actively searching for a CNC Miller to join their team on a permanent basis.The successful CNC Miller will easily be able to commute to the NORTH BRADFORD facility from surrounding towns & cities, including Keighley, Ilkley, Skipton, Colne, Nelson, Burnley, Barnoldswick, Shipley and northern parts of Halifax.Key Responsibilities of the CNC Miller will include:
Programming, setting and operating a variety of Machining Centres order to produce complex components for use in the Naval Marine, Oil & Gas and Chemical sectors
Reading, interpreting and working directly from engineering drawings and technical diagrams, ensuring that strict quality tolerances are achieved in-line with specification
Self-inspection, carrying out mechanical/visual inspection using various measuring instruments
Actively participating in continuous improvement activities and identifying process improvements as necessary
For the CNC Miller role, we are keen to receive CVs from individuals who possess:
IDEAL NOT ESSENTIAL - Formal qualifications within a relevant discipline (Apprenticeship, HNC, HND, BTEC/NVQ/City & Guilds Level 3 etc.)
Stable & relevant experience working in a similar role, with Milling and/or Turning experience
The ability to generate new programs using any machine control (Fanuc, Mazatrol, Heidenhain, Siemens, Prototrak, HAAS etc.)
In return, the CNC Miller will receive:
Renumeration: Up to £34,192.08 per annum (£16.86 per hour)
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 8% Combined contribution (4% matched)
Working Hours: 39 Per week spread across 4 days - Monday to Thursday - 06:00 to 17:00
Opportunity to work frequent overtime, paid at 150%
To apply for the CNC Miller position, please click “Apply Now” and attach a copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information ....Read more...
Type: Permanent Location: Bingley, England
Start: ASAP
Salary / Rate: Up to £34192.0800 per annum + 33 Holidays
Posted: 2025-06-04 13:28:29
-
Title: Marine Engineer
Location: Wroxham - Norfolk
Salary or Rate: £33K - £35K plus Overtime.
Hours: 40 Hours Plus Overtime available
Type: Permanent
HSB ID: 244/28
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors.
We have several permanent and contract vacancies for multiple businesses across the UK and overseas – visit our website or LinkedIn page for more.
Our Client is looking for a Marine biased Engineer to Join their expanding Team.
The Engineer will be responsible for the preparation, build and installation of engineering systems in line with the current drawings, specifications, and guidelines
Day to day duties and responsibilities of the Marine Engineer:
Mechanical fitter of all general Marine systems including, but not limited to, hydraulics, plumbing (domestic, marine, grey, black, fresh water), air conditioning, gas installations, engine/gearbox, and final drive installations
Experience with HVAC and piping systems.
Engine alignment.
Fitting all mechanical components.
Reading and interpretation of technical drawings
Qualifications and requirements requested for the Marine Engineer:
Experience working within the marine Industry
Proven experience in fault finding and problem-solving.
Experience with freshwater cooling systems
Experience with air conditioning and on board kitchen/galley appliances i.e plumbing fixing and maintenance.
This vacancy is being advertised by HSB Technical Ltd who are governed by the Recruitment and Employment Confederation (REC) and have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Permanent Location: Wroxham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £33000 - £35000 Per Annum Overtime Available.
Posted: 2025-06-04 11:19:01
-
Position: Marine Electrician
Job ID: 244/27
Location: Wroxham - Norfolk
Rate: £33K - £35K - plus Overtime
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Marine Electrician
We are looking for a Marine Electrician for one of our maritime clients.
Typically, this person will be working from electrical schematics as well as investigation and diagnostics of existing of equipment.
You will be able to install, fault find and repair electrical installations, including motor starters and equipment control panels to an exacting standard.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the Marine Electrician:
• Install cable support systems.
• Run and dress cabling in an extremely neat fashion.
• Install control cabinet enclosures.
• Test your own work to recognised standards (IEE 17th Test and Inspect).
• Assist other departments with their temporary power requirements taking into account electrical loads and distances involved.
• Assist the commissioning engineers and take an active role in commissioning equipment
Qualifications and requirement for the Marine Electrician:
• Apprentice trained or NVQ Level 3.
• A proven track record in a marine electrical role.
• Experience with 3-phase, motors, motor starters, distribution systems.
• Previous experience of working on new build vessels
• Extremely neat work
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Permanent Location: Wroxham, England
Start: Asap
Duration: Permanent
Salary / Rate: £33000 - £35000 Per Annum Overtime Available.
Posted: 2025-06-04 11:14:58
-
Title: Marine Engineer
Location: Wroxham - Norfolk
Salary or Rate: £24p/hour
Hours: 40 Hours Plus Overtime available
Type: Contract
HSB ID: 244/4
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors.
We have several permanent and contract vacancies for multiple businesses across the UK and overseas – visit our website or LinkedIn page for more.
Our Client is looking for a Marine biased Engineer to Join the team for a 3 month contract.
The Engineer will be responsible for the preparation, build and installation of engineering systems in line with the current drawings, specifications, and guidelines
Day to day duties and responsibilities of the Marine Engineer:
Mechanical fitter of all general Marine systems including, but not limited to, hydraulics, plumbing (domestic, marine, grey, black, fresh water), air conditioning, gas installations, engine/gearbox, and final drive installations
Experience with HVAC and piping systems.
Engine alignment.
Fitting all mechanical components.
Reading and interpretation of technical drawings
Qualifications and requirements requested for the Marine Engineer:
Experience working within the marine Industry
Proven experience in fault finding and problem-solving.
Experience with freshwater cooling systems
Experience with air conditioning and on board kitchen/galley appliances i.e plumbing fixing and maintenance.
This vacancy is being advertised by HSB Technical Ltd who are governed by the Recruitment and Employment Confederation (REC) and have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Contract Location: Wroxham, England
Start: Asap
Duration: 3 Months
Salary / Rate: £24 - £24 Per Hour Plus Overtime
Posted: 2025-06-04 11:06:46
-
Position: Project Engineer
Location: South Shields
Type: Permanent
Salary: £36-40K
Ref: 2094/33
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Project Engineer
Typically, this role supports the planning and delivery of engineering projects for a busy marine client, focusing on technical coordination with internal teams, OEMs, contractors, and MOD stakeholders.
The ideal candidate will bring strong project engineering skills, experience in marine, mechanical, or electrical systems, and a solid understanding of naval operations and standards.
HSB Technical’s client is an established and well-regarded business entity.
The below job description will outline this position of Project Engineer
Define and prioritise technical scopes in collaboration with suppliers, OEMs, and customers.
Manage onboard engineering upgrades and modifications.
Lead technical planning to ensure clear, achievable specs and goals.
Oversee contractor and OEM work, both on-site and remotely.
Coordinate with MOD to ensure compliance with defence standards.
Drive projects from request to completion, meeting all technical goals.
Contribute to the creation of detailed work packages.
Track progress, resolve issues, and enforce safety and quality standards.
Maintain technical records and support regular project reporting.
Assist with cost/resource estimates, change management, and improvements.
Represent engineering at client meetings..
Support clients in resolving issues to protect vessel readiness and availability.
Qualifications and requirement for the Project Engineer:
HNC/HND or Degree in Mechanical, Marine, Electrical Engineering, or similar.
This would suit someone who has experience with Royal Navy, RFA or MOD.
Project engineering experience, ideally in defence or marine.
Strong problem-solving and hands-on engineering knowledge.
Able to manage multiple tasks and engage with varied stakeholders.
Understanding of project lifecycles, maintenance, and OEM coordination.
Proficient in MS Office (Word, Excel, SharePoint, Teams).
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Permanent Location: South Shields, England
Start:
Duration:
Salary / Rate: £36000 - £40000 Per Annum
Posted: 2025-06-04 10:59:21
-
Position: Marine Engineer
Job ID: 2818/2
Location: Plymouth
Rate/Salary: £34 – 44K Plus
Type: Permanent / Full Time
Benefits: 25 days + BH, training courses, mobile phone, pension, uniform
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Marine Engineer
Typically, this person will need to be ready to take on a wide range of responsibilities from diagnosing technical issues and upgrading older vessels, to handling breakdown repairs and routine maintenance for marine leisure and commercial boats, as well as working on the mechanical systems of generators.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the Marine Engineer:
Inboard & outboard engines
Engine controls & electrical systems
Gearboxes, stern drives, IPS & stern gear
Generators, pumps, fuel tanks & systems
Thrusters, hydraulics, lifting & stropping
Sea trials and diagnostics
Manage your own workload efficiently
Complete time sheets and maintain service records (often online)
Use electronic parts catalogues to identify and order parts
Liaise directly with customers, providing updates and top-level service
Respond to enquiries with professionalism and technical expertise
Qualifications and requirement for the Marine Engineer:
Marine Engineering Qualification desirable
Full UK Driving Licence
Strong attention to detail
Basic IT Skills.
A commitment to high standards and customer satisfaction
A "go the extra mile" attitude to keep customers returning.
Desirable but not necessary:
Forklift licence
Manual handling
VHF
Main dealer / manufacturing training.
Powerboat level 2
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Permanent Location: Plymouth, England
Start:
Duration:
Salary / Rate: £34000 - £44000 Per Annum
Posted: 2025-06-04 10:53:14
-
Manufacturing Engineer
Location: Tamworth
Salary: £35-40k dependent on experience
We are currently working with a group of companies that delivers precision cut ground gears, splines threads and gauges as well as tooling to meet the exacting specifications of industries including automotive, aerospace, motorsport, oil and gas, marine and defence.
Manufacturing Engineer Overview:
The Manufacturing Engineer will join a team of 5 in the drawing office, focusing on producing high-quality 2D engineering drawings and 3D models to support the manufacture of components.
The role also involves proposing cost-effective manufacturing solutions and identifying ways to minimise production costs while maintaining quality.
Manufacturing Engineer Responsibilities:
- Understanding customer requirements by studying drawings and discussing requirements with the customer's technical staff.
- Considering specific customer requirements related to heat treatment, surface finish and dimensional tolerances.
- Understanding interfaces, mating, tolerances and fits to other process equipment.
- Working with manufacturing departments to ensure they can meet drawing tolerances and accuracies.
- Producing drawings to a consistent standard with clear notes and explosions of complex details.
- Marking up drawings for internal engineers and sub-contract manufacturers to enable accurate production of finished components.
- Checking that manufactured or measured parts do not interfere with fixtures, jigs or holding devices.
- Working with the purchasing department to use stock or standard materials with acceptable lead times.
- Designing new tooling and fixtures.
- Reviewing customer designs and issuing instructions to the shop floor.
- Efficiently issuing, storing and archiving designs, calculations and drawings.
Manufacturing Engineer Requirements:
- Qualified to HNC/HND/Degree standard in Mechanical Engineering or having relevant experience.
- Proficient in using AutoCAD and/or Creo and Microsoft Office.
- Capable of working alone and liaising efficiently with internal and external parties.
- An in-depth understanding of design for manufacture and manufacturing processes.
- Machining knowledge to understand manufacturing routes.
Manufacturing Engineer Desirable Experience:
- Apprenticeship trained (engineering).
- Experience in the automotive, power transmission, gear, and calibration industries.
Working Hours:
- Monday to Thursday: 08:00hrs to 17:00hrs
- Friday: 08:00hrs to 13:00hrs
Manufacturing Engineer Benefits:
- Company Pension (5% company contribution)
- Health cash plan scheme
- Employee Assistance Programme
- Holidays increase with service from 5 complete years
- Social activities
How To Apply for the Manufacturing Engineer role:
Please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Tamworth,England
Start: 03/06/2025
Salary / Rate: £35000 - £40000 per annum
Posted: 2025-06-03 23:39:30
-
£32,000 + Excellent BenefitsA vacancy has arisen for a Finance & Administration Executive to join the Operations, Finance & Administration team.
This is a fantastic opportunity to be part of a dynamic, forward-thinking Chambers and to gain valuable experience of working in a support team within a busy commercial chambers.Our client is a leading commercial barristers' chambers, with a thriving domestic and international practice, specialising in providing services across the areas of construction and engineering; energy and natural resources; infrastructure and utilities; international arbitration; IT and technology; offshore construction and marine engineering; planning and environment; procurement; competition; and associated professional negligence.The successful Finance & Administration Executive duties will include purchase ledger, sales ledger, petty cash and bank and credit card reconciliation, using Xero Accounts and LEX.
This role will report to the Head of Finance and the Head of Operations and will work in conjunction with the COO and all other teams.Key Responsibilities
All basic accounts duties for sales ledger, purchase ledger, bank reconciliation and petty cash.
Processing all barrister payments on bespoke system.
Reconciling payments received.
Using Xero Account software and LEX.
Process month end invoices, statements and barristers VAT reports all on Xero.
Year-end financial reports for barristers.
Credit card statement reconciliation.
Data processing, payments, data checking and filing.
Helping barristers with professional indemnity insurance and practising certificates.
Liaising and managing suppliers and getting best deals available.
Managing our mobile contract keeping us informed of changes to roaming costs etc.
Online banking.
Reception cover.
Assisting with changes to room layouts and furniture removals etc.
as and when required (e.g.
for in-house seminars, chambers' lunches etc.).
Assisting with conference refreshment requirements.
Help with setting up internal and external events.
Liaising with other departments and assisting in other areas to ensure smooth running of Chambers.
Any other tasks as reasonably required by the Head of Finance and the Head of Operations.
Additional Responsibilities
Undertaking ad-hoc organisation of tasks for barristers such as celebrations, dinners and Christmas parties, assisting the marketing team as required.
Marketing - Chambers seeks to promote itself actively with clients and potential clients.
These activities may take place outside of normal office hours.
The post-holder may therefore be expected to provide support such as greeting guests on a small number of occasions during the year.
Any other tasks as reasonably required to assist other departments as approved by the Head of Finance or the Head of Operations.
Skills & Experience
Educated to A Level standard with a minimum of 2 A Levels and university degree preferred.
Experience of Xero Accounts/LEX preferred but not essential (training will be provided).
Team player able to work unsupervised and under pressure.
Good problem-solving abilities.
Excellent communication skills - both written and oral.
Excellent people skills and the ability to build strong internal relationships.
Polite, friendly and of smart appearance.
Demonstrate a positive attitude and a willingness to learn.
Ability to handle confidential information discreetly.
Good IT skills with experience of O365.
Benefits
20 days holiday plus bank holidays (rising to 22 days after one year and 25 days after two years)
6% pension contribution
Bonus scheme
Season ticket loan
Permanent health insurance
Private medical insurance
Half day 'birthday' holiday
Following completion of probation Chambers supports candidates undertaking financial qualifications
This is a superb opportunity for a highly organised individual with a positive outlook, excited by the prospect of a career within the legal sector.
You will be part of a small team that works closely together to deliver outstanding service.
....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: Up to £32000.00 per annum + Excellent Benefits
Posted: 2025-06-02 11:55:21
-
Graduate EngineerDublin
€43'000 - €50'000 Basic + Bonus + Customer Facing + Technical Development + Progression + Stability + Package + Immediate Start
Are you looking for an opportunity as a graduate engineer where you can launch your career with a manufacturer in Dublin delivering high precision materials to the construction, marine, defence and aerospace industries and more.
This is your chance to gain experience in the structural side within materials in a varied role where you will be heavily customer facing.
This is an exciting opportunity to work within an OEM who have exciting growth plans over the next 5 years, for the longterm where you can get training, gain qualifications and hands on experience and progress your career.
Be part of a team where you can learn while earning a great salary that will progress over time!
Your Role as a Graduate Engineer Will Include:
Gaining qualifications and hands on experience as a structural engineer
Developing specifications, attend site inspections
Complex calculations, developing drawings using CAD
As your skills develop, so will your responsibilities
As a Graduate Engineer You Will Have:
A degree or similar in civil / structural / mechanical engineering
A proactive attitude with a strong work ethic and eagerness to learn.
Some construction knowledge
Knowledge of CAD would be ideal
If interested apply to Georgia Daly or call 07458163040. Keywords: graduate engineer, structural engineer, civil engineer, construction, grad, degree, hnc, hnd, graduate structural engineer, graduate civil engineer, Mechanical Engineer, Dublin, Ireland, Republic Of Ireland
Future Engineering Recruitment Ltd is that of an Employment Agency.
Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Dublin, Republic of Ireland
Start: ASAP
Salary / Rate: €43000 - €50000 per annum + Bonus + Progression + Customer Facing
Posted: 2025-05-30 15:56:12
-
Position: Naval Architect / Exterior Designer
Job ID: 187/177
Location: Southampton, UK
Rate/Salary: Negotiable dependent on experience and skill level
Benefits: 25 days annual leave per year, Employer Pension contribution, Death in Service cover, Cycle to Work scheme, TELUS Assistance Programme, Sick Pay Scheme
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit www.hsbtechnical.com for a full list of our current vacancies.
We work with multiple leading businesses across the UK and overseas to recruit for both permanent and contract roles.
The below job description outlines the position of: Naval Architect
Typically, the successful candidate will be responsible for producing and delivering high-quality technical drawings and design documentation in line with design schedules and project timelines.
They will play a key role in supporting design development, yard operations, and project teams by providing accurate and detailed technical data throughout the build and commissioning phases.
HSB Technical’s client is an established and well-regarded business entity known for delivering quality and innovation within the marine industry.
Duties and responsibilities of the Naval Architect
Create, maintain, and manage comprehensive technical documentation focused on Naval Architecture and exterior fit-out aspects of vessel construction and new model development.
Issue design drawings and technical information, coordinating closely with external suppliers, fabricators, and production teams to ensure alignment and timely updates.
Work collaboratively with production and fabrication teams to implement design corrections and updates, aiming to streamline build processes and minimise potential delays or complications.
Maintain and update critical design information databases, including drawing issue registers, weight estimates, sail plans, deck plans, and general arrangements.
Provide technical input into weight studies, cradle design, docking plans, rigging component design, and load calculations to support safe and efficient vessel construction.
Lead surface modelling and GRP tooling design efforts as required.
Specify and design deck fittings, including both standard parts and custom fabrications such as stainless steel components and exterior mechanical installations (e.g., pushpits, passerelles, biminis, deck hatches).
Attend development and project meetings to stay current with design changes and incorporate production feedback effectively.
Conduct research into new technical specifications, systems, or component designs to support continuous improvement in design and manufacturing processes.
Qualifications and requirements for the Naval Architect
Degree-level qualification in Naval Architecture, Engineering, or a closely related technical discipline.
Practical and theoretical knowledge of sailing yachts, with a strong understanding of Naval Architecture principles.
Sound knowledge of stainless steel, aluminium, and composite fabrication techniques, and experience specifying sailing systems such as hydraulic rams, furlers, and winches.
Solid understanding of mechanical systems relevant to vessel design and construction.
Proficiency in 3D parametric modelling software (preferably NX) and 2D AutoCAD draughting
Competent user of Microsoft Office, particularly Excel, to manage and analyse technical data.
Proven practical experience within the marine industry, ideally in a similar design or naval architecture role.
Excellent communication skills with the ability to interpret and convey complex technical drawings and information clearly to production and project teams.
Self-motivated, proactive, and able to work independently while maintaining organisation and attention to detail.
Willingness and ability to travel occasionally to other company or project sites as required.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Southampton, England
Start: 04/08/2025
Duration: Permanent
Salary / Rate: £1 - £100000 Per Annum
Posted: 2025-05-30 11:09:19
-
Our partner are growing their national team of Marine Electronics Technicians and Engineers, to be based at various sites in the UK (eg.
Portsmouth, Hull, Liverpool, Chelmsford, Lowestoft)
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels.
Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected.
The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
- Essential: Full UK driving licence
- Medical: Must be able to pass a medical and annual working at height training
- Right to Work: Applicants must have the legal right to work in the UK.
Sponsorship is not currently available.
Whats On Offer:
- Competitive salary
- Company car
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics. ....Read more...
Type: Permanent Location: United Kingdom,United Kingdom
Start: 29/05/2025
Salary / Rate: Competitive
Posted: 2025-05-29 08:59:04
