-
JOB DESCRIPTION
Essential Duties and Responsibilities:
Duties Description Assisting Sales Assisting the Sales Representative with sales process from prospecting to closing; developing business in assigned markets, providing solid market presence including serving customers.
Assisting the Sales Representative in making sales.
This work may include, but is not limited to: preparing and/or distributing marketing materials; inspection and evaluation of the property; preparing roof drawings and sketches; preparing scope of work documents; preparing proposals; attending sales calls; pricing patch and repair jobs; providing technical expertise; and attending meetings with the architect, contractor and/or owner.
Inspections
This work may include, but is not limited to: identifying; analyzing; and resolving any problems; and preparing reports to owners regarding the condition of roofs.
When and where necessary or required, may perform QA/ QA+ inspections, Tremcare Gold Service (periodic visual inspection with minor repairs being addressed where detected on Tremco warranted roofs only).
Monitoring Installation Visits to project sites to monitor installation of Tremco roofing products for the purpose of determining whether to issue a Tremco warranty.
This work may include, but is not limited to: monitoring progress of the installation; identifying any aspect of installation that does not comply with specifications; reviewing and resolving concerns of architects, contractors and owners regarding Tremco's installation instructions; coordinating visits with contractors; and preparing reports on progress and problems for the Sales Representative.
Troubleshooting Identifying problems arising during installation and the lifecycle of the roof.
This work may include but is not limited to: identifying source(s) of leaks; analyzing problems to determine the best solution; monitoring implementation of the solution; and preparing written action plans.
This work will represent less than 45% of the SA's time Manual Labor Performing patch and repair work for small leaks that can be performed quickly after identifying the leak and other infrequent, limited physical labor.
Performing minor maintenance (caulking, flashing touch up, applying small amounts of mastic, removing debris, etc.) to prevent potential leaks.
Other Work This work may include but is not limited to: conducting diagnostic infra-red scans of roofs; taking photographs; preparing CADD drawings; and delivering or picking up samples, documents or small products from/to architects, owners and contractors.
Education and/or Experience:
Minimum: Associates degree or equivalent from two-year college or technical school; or combination of education and experience.
Must have a minimum of two to three years of related hands-on experience and/or training in a similar role.
Prior sales and/or customer related experience in roofing industry required.
Qualifications:
Thorough understanding and application of roofing and waterproofing contracting standards. Experience with MS Word, Excel and familiarity with CADD Excellent written and verbal communication skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service. Good analytical, troubleshooting, and problem-solving skills.
Language Skills: Ability to read, analyze and interpret general business and technical information, e.g.
professional journals and periodicals, technical procedures, or governmental regulations.
Ability to draft reports, business correspondence and similar documents. Ability to effectively present information and respond to questions from customers, contractors, and architects. Ability to communicate business and technical information (e.g.
information relating to status of projects, remediation plans, and customer concerns) to Sales Representative.
Mathematical Skills: Intermediate skills: ability to calculate figures and amounts such as discounts, interest, commissions, proportions, area, circumference and volume.
Reasoning Ability: High skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
Physical Demands: Ability to climb interior/exterior ladders to access roofs and carry equipment up to approximately fifty pounds over short distances. Ability to walk along roof top edges (i.e., no fear of heights, good balance). Tolerance to exposure to outside weather conditions (heat, cold, etc.).
Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-08 15:11:30
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: We are seeking a highly skilled and motivated BIM Manager to join our team.
The BIM Manager will be responsible for managing and optimizing the Revit/Building Information Modeling (BIM) implementation to enhance the design, fabrication, and coordination of HercuWall.
This role will involve working closely with product, production, and sales teams to develop accurate and efficient BIM models that support manufacturing processes and ensure seamless integration of designs into the production floor.
The ideal candidate will have expertise in Revit including advanced Family creation.
A strong understanding of factory built panelized systems, general commercial and residential building design along with the ability to collaborate effectively across multiple teams.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Develop, manage, and maintain detailed Revit models, ensuring accurate representation of designs for production and installation. Develop Revit families and work to integrate add-in software to improve BIM efficiencies and specialized outputs. Maintain and enhance the configuration of Be.Smart Metal Framing (formerly AGACAD).
Maintain and enhance the Be.Smart tools to automated repetitive tasks in Revit and manipulate and export data to Excel. Develop and maintain Revit Shared Parameters file, understanding the role of Shared Parameters in Revit Families and subsequent integration into ERP Systems Work closely with preconstruction to understand project specifications and translate them into Revit models that align with production requirements. Collaborate with production and product teams to identify and resolve potential design or fabrication issues early in the process. Assist in the creation and management of 3D models, drawings, and digital construction documents to streamline the manufacturing process and improve product accuracy.
Perform clash detection and ensure coordination between different disciplines (e.g., architecture, structure, MEP) to avoid design conflicts during the preconstruction phase. Support the team in optimizing panel design for manufacturability, cost efficiency, and ease of installation. Provide Revit/BIM training and support, including developing standards and guidelines for BIM implementation. Maintain Revit/BIM-related documentation and records, ensuring that all models and documents are up-to-date and accurate. Collaborate with the preconstruction team to conduct reviews, design validation, and coordination meetings to ensure the alignment of the models with client expectations and production requirements. Participate in the development of customized Revit/BIM workflows and tools to improve efficiency, enhance collaboration, and meet project deadlines. Monitor industry trends and advancements in BIM technology, recommending new tools and practices to improve the efficiency and effectiveness of the BIM process. Additional tasks and duties, as required.
EDUCATION REQUIREMENT:
Bachelor's degree in Architecture, Civil Engineering, Construction Management, or a related field preferred.
EXPERIENCE REQUIREMENT:
10+ years of use and implementation of Autodesk Revit in conjunction with the Autodesk Construction Cloud.
Expert level knowledge along with Revit Certification highly desired.
Strong familiarity with other CAD software such as AutoCAD, Rhino 3D.
General knowledge of other BIM related software and 3rd party Revit tools used for data manipulation and automation of repetitive tasks such as Be.Smart, CTC Tools, IMAGINiT for Revit, DI Roots.
Knowledge or interest in CNC fabrication Experience with 3D modeling, detailing, and visualization of building components, specifically in modular or factory panelized systems. Strong understanding of the construction industry, building materials, and fabrication processes, with the ability to apply Revit/BIM technology to support manufacturing and installation.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Revit/BIM coordination, clash detection, and model management processes. Excellent problem-solving skills with the ability to identify issues early in the design process and propose solutions. Strong communication skills with the ability to collaborate and communicate effectively with engineers, architects, designers, and other team members. Knowledge of industry standards, best practices, and protocols related to BIM, as well as basic understanding of Building Codes IBC and IRC. Detail-oriented with excellent organizational skills and the ability to manage multiple tasks and deadlines effectively. Ability to work in a team-oriented environment and foster collaboration across different departments. Ability to prioritize tasks, manage multiple projects, and meet deadlines in a fast-paced environment.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 25 lbs.
occasionally.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $87,991 and $109,989.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Coppell, Texas
Posted: 2025-05-08 15:11:30
-
JOB DESCRIPTION
Essential Duties and Responsibilities:
Duties Description Assisting Sales Assisting the Sales Representative with sales process from prospecting to closing; developing business in assigned markets, providing solid market presence including serving customers.
Assisting the Sales Representative in making sales.
This work may include, but is not limited to: preparing and/or distributing marketing materials; inspection and evaluation of the property; preparing roof drawings and sketches; preparing scope of work documents; preparing proposals; attending sales calls; pricing patch and repair jobs; providing technical expertise; and attending meetings with the architect, contractor and/or owner.
Inspections
This work may include, but is not limited to: identifying; analyzing; and resolving any problems; and preparing reports to owners regarding the condition of roofs.
When and where necessary or required, may perform QA/ QA+ inspections, Tremcare Gold Service (periodic visual inspection with minor repairs being addressed where detected on Tremco warranted roofs only).
Monitoring Installation Visits to project sites to monitor installation of Tremco roofing products for the purpose of determining whether to issue a Tremco warranty.
This work may include, but is not limited to: monitoring progress of the installation; identifying any aspect of installation that does not comply with specifications; reviewing and resolving concerns of architects, contractors and owners regarding Tremco's installation instructions; coordinating visits with contractors; and preparing reports on progress and problems for the Sales Representative.
Troubleshooting Identifying problems arising during installation and the lifecycle of the roof.
This work may include but is not limited to: identifying source(s) of leaks; analyzing problems to determine the best solution; monitoring implementation of the solution; and preparing written action plans.
This work will represent less than 45% of the SA's time Manual Labor Performing patch and repair work for small leaks that can be performed quickly after identifying the leak and other infrequent, limited physical labor.
Performing minor maintenance (caulking, flashing touch up, applying small amounts of mastic, removing debris, etc.) to prevent potential leaks.
Other Work This work may include but is not limited to: conducting diagnostic infra-red scans of roofs; taking photographs; preparing CADD drawings; and delivering or picking up samples, documents or small products from/to architects, owners and contractors.
Education and/or Experience:
Minimum: Associates degree or equivalent from two-year college or technical school; or combination of education and experience.
Must have a minimum of two to three years of related hands-on experience and/or training in a similar role.
Prior sales and/or customer related experience in roofing industry required.
Qualifications:
Thorough understanding and application of roofing and waterproofing contracting standards. Experience with MS Word, Excel and familiarity with CADD Excellent written and verbal communication skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service. Good analytical, troubleshooting, and problem-solving skills.
Language Skills: Ability to read, analyze and interpret general business and technical information, e.g.
professional journals and periodicals, technical procedures, or governmental regulations.
Ability to draft reports, business correspondence and similar documents. Ability to effectively present information and respond to questions from customers, contractors, and architects. Ability to communicate business and technical information (e.g.
information relating to status of projects, remediation plans, and customer concerns) to Sales Representative.
Mathematical Skills: Intermediate skills: ability to calculate figures and amounts such as discounts, interest, commissions, proportions, area, circumference and volume.
Reasoning Ability: High skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
Physical Demands: Ability to climb interior/exterior ladders to access roofs and carry equipment up to approximately fifty pounds over short distances. Ability to walk along roof top edges (i.e., no fear of heights, good balance). Tolerance to exposure to outside weather conditions (heat, cold, etc.).
Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-08 15:11:23
-
JOB DESCRIPTION
WTI/Pure Air Controls Services Estimating Engineer Job Description
Engineer (Preconstruction)
General Purpose:
To assess project requirements, gather technical data, and provide accurate cost estimates for HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with estimating skills to ensure that HVAC projects are planned and budgeted effectively.
Here are the primary purposes and responsibilities of a Preconstruction Engineer:
Responsibilities and Duties:
Determines scope, designs solutions and estimates cost of HVAC restoration projects. Understands components and function of existing mechanical systems that are being altered or renovated. Develops a project scope of work through site visits and discussions with owner / facility staff Exercises control over design and production tasks to enable HVAC restoration projects. Drafts construction documents and generates specifications for HVAC restoration projects. Utilizes in-house estimating tools to create project budgets. Assists sales team with scope reviews and support as needed. Creates, maintains, and improves estimating tools. Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
Conducts on-site visits and assessments to understand the scope and technical intricacies of specific projects.
This includes evaluating existing HVAC systems, identifying any issues or challenges, and gathering data needed for precise estimation. Ensures a smooth transition from estimation to project execution, providing technical guidance and insights as needed.
Qualifications Bachelor's degree or equivalent experience. 3+ years of industry-specific experience. Experience with construction drafting in AutoCAD. EI certification with ability to obtain PE license preferred. Advanced Microsoft Office Suite knowledge preferred. Experience with programming language (VBA, C#, etc.) preferred Experience with cloud based platforms (Pro-Core, E-Builder, iAuditor, etc) preferred. Ability to travel out of state up to 25% The salary range for applicants in this position generally ranges between $88,000 and $110,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-05-08 15:11:19
-
JOB DESCRIPTION
DAP is looking to hire a Product Development Scientist in R&D Department. As a R&D Scientist, you will perform experiments and generate general test data and analytical data with minimal guidance from senior R&D personnel while learning the basic principles of product development and formulation.
Participate in and help drive activities that improve the operation of the R&D function.
Collaborate with other R&D personnel and participate in cross-functional teams to help drive innovation.
Proven success in previous role.
Responsibilities:
Carry out assigned experimental plans for new product development, product modification, or technology development projects and perform basic analysis of experimental results with minimal guidance of senior R&D Personnel.
Develop and use basic formulation skills.
Display capability to problem-solve in R&D context, troubleshoot and optimize laboratory experiments.
Demonstrate the ability to operate analytical and material characterization equipment, generate high quality data, and organize the data for further in-depth analysis. Assist senior R&D Personnel to develop manufacturing procedures for new products and work collaboratively at plant trials with plant engineers and quality control managers.
Learn to apply basic process steps for Plant Trials. Use the principles of DAP Innovation Processes (Innovation Engineering, etc.) and R&D Management Processes in everyday work. Adhere to Laboratory Quality Management System (QMS) practices and participate in QMS audits.
Assist in laboratory equipment calibration and maintenance.
Use Product Vision to manage data and projects.
Provide deliverables for projects in the Accolade project management system. Assist in providing technical support for marketing, sales, and customer support including planning/conducting product demonstrations for customers, trade shows, Etc.
Adhere to laboratory safety practices and participate in all safety and housekeeping initiatives.
Demonstrate the ability to assemble information for and generate effective written reports and oral presentations to communicate within R&D and with cross-functional teams.
Requirements:
Bachelor of Science degree in Chemistry, Polymer Science, Materials Science, or related field with 5 years' experience of relevant experience A passion for chemistry, science, problem solving, and creativity. Excellent interpersonal, written, and verbal communication and presentation skills. A breadth of technical knowledge and a keen interest in learning from others. Possess innovation skills evident as risk taking, result seeking, and idea integration.
Hands-on bench experience with various chemistries (latex, moisture curing, reactive, etc.) in sealants, adhesives, coatings, repair or related field. Bench chemistry experience and familiarity with various analytical techniques: wet chemistry, titrations, microscopy, rheology, thermal analysis, tensile testing, etc. Experience operating lab scale mixing equipment as well as lab scale analytical and testing apparatus.
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
75,000 to 100,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-05-08 15:11:15
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: We are seeking a highly skilled and motivated BIM Manager to join our team.
The BIM Manager will be responsible for managing and optimizing the Revit/Building Information Modeling (BIM) implementation to enhance the design, fabrication, and coordination of HercuWall.
This role will involve working closely with product, production, and sales teams to develop accurate and efficient BIM models that support manufacturing processes and ensure seamless integration of designs into the production floor.
The ideal candidate will have expertise in Revit including advanced Family creation.
A strong understanding of factory built panelized systems, general commercial and residential building design along with the ability to collaborate effectively across multiple teams.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Develop, manage, and maintain detailed Revit models, ensuring accurate representation of designs for production and installation. Develop Revit families and work to integrate add-in software to improve BIM efficiencies and specialized outputs. Maintain and enhance the configuration of Be.Smart Metal Framing (formerly AGACAD).
Maintain and enhance the Be.Smart tools to automated repetitive tasks in Revit and manipulate and export data to Excel. Develop and maintain Revit Shared Parameters file, understanding the role of Shared Parameters in Revit Families and subsequent integration into ERP Systems Work closely with preconstruction to understand project specifications and translate them into Revit models that align with production requirements. Collaborate with production and product teams to identify and resolve potential design or fabrication issues early in the process. Assist in the creation and management of 3D models, drawings, and digital construction documents to streamline the manufacturing process and improve product accuracy.
Perform clash detection and ensure coordination between different disciplines (e.g., architecture, structure, MEP) to avoid design conflicts during the preconstruction phase. Support the team in optimizing panel design for manufacturability, cost efficiency, and ease of installation. Provide Revit/BIM training and support, including developing standards and guidelines for BIM implementation. Maintain Revit/BIM-related documentation and records, ensuring that all models and documents are up-to-date and accurate. Collaborate with the preconstruction team to conduct reviews, design validation, and coordination meetings to ensure the alignment of the models with client expectations and production requirements. Participate in the development of customized Revit/BIM workflows and tools to improve efficiency, enhance collaboration, and meet project deadlines. Monitor industry trends and advancements in BIM technology, recommending new tools and practices to improve the efficiency and effectiveness of the BIM process. Additional tasks and duties, as required.
EDUCATION REQUIREMENT:
Bachelor's degree in Architecture, Civil Engineering, Construction Management, or a related field preferred.
EXPERIENCE REQUIREMENT:
10+ years of use and implementation of Autodesk Revit in conjunction with the Autodesk Construction Cloud.
Expert level knowledge along with Revit Certification highly desired.
Strong familiarity with other CAD software such as AutoCAD, Rhino 3D.
General knowledge of other BIM related software and 3rd party Revit tools used for data manipulation and automation of repetitive tasks such as Be.Smart, CTC Tools, IMAGINiT for Revit, DI Roots.
Knowledge or interest in CNC fabrication Experience with 3D modeling, detailing, and visualization of building components, specifically in modular or factory panelized systems. Strong understanding of the construction industry, building materials, and fabrication processes, with the ability to apply Revit/BIM technology to support manufacturing and installation.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Revit/BIM coordination, clash detection, and model management processes. Excellent problem-solving skills with the ability to identify issues early in the design process and propose solutions. Strong communication skills with the ability to collaborate and communicate effectively with engineers, architects, designers, and other team members. Knowledge of industry standards, best practices, and protocols related to BIM, as well as basic understanding of Building Codes IBC and IRC. Detail-oriented with excellent organizational skills and the ability to manage multiple tasks and deadlines effectively. Ability to work in a team-oriented environment and foster collaboration across different departments. Ability to prioritize tasks, manage multiple projects, and meet deadlines in a fast-paced environment.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 25 lbs.
occasionally.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $87,991 and $109,989.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Coppell, Texas
Posted: 2025-05-08 15:11:12
-
JOB DESCRIPTION
Essential Duties and Responsibilities:
Duties Description Assisting Sales Assisting the Sales Representative with sales process from prospecting to closing; developing business in assigned markets, providing solid market presence including serving customers.
Assisting the Sales Representative in making sales.
This work may include, but is not limited to: preparing and/or distributing marketing materials; inspection and evaluation of the property; preparing roof drawings and sketches; preparing scope of work documents; preparing proposals; attending sales calls; pricing patch and repair jobs; providing technical expertise; and attending meetings with the architect, contractor and/or owner.
Inspections
This work may include, but is not limited to: identifying; analyzing; and resolving any problems; and preparing reports to owners regarding the condition of roofs.
When and where necessary or required, may perform QA/ QA+ inspections, Tremcare Gold Service (periodic visual inspection with minor repairs being addressed where detected on Tremco warranted roofs only).
Monitoring Installation Visits to project sites to monitor installation of Tremco roofing products for the purpose of determining whether to issue a Tremco warranty.
This work may include, but is not limited to: monitoring progress of the installation; identifying any aspect of installation that does not comply with specifications; reviewing and resolving concerns of architects, contractors and owners regarding Tremco's installation instructions; coordinating visits with contractors; and preparing reports on progress and problems for the Sales Representative.
Troubleshooting Identifying problems arising during installation and the lifecycle of the roof.
This work may include but is not limited to: identifying source(s) of leaks; analyzing problems to determine the best solution; monitoring implementation of the solution; and preparing written action plans.
This work will represent less than 45% of the SA's time Manual Labor Performing patch and repair work for small leaks that can be performed quickly after identifying the leak and other infrequent, limited physical labor.
Performing minor maintenance (caulking, flashing touch up, applying small amounts of mastic, removing debris, etc.) to prevent potential leaks.
Other Work This work may include but is not limited to: conducting diagnostic infra-red scans of roofs; taking photographs; preparing CADD drawings; and delivering or picking up samples, documents or small products from/to architects, owners and contractors.
Education and/or Experience:
Minimum: Associates degree or equivalent from two-year college or technical school; or combination of education and experience.
Must have a minimum of two to three years of related hands-on experience and/or training in a similar role.
Prior sales and/or customer related experience in roofing industry required.
Qualifications:
Thorough understanding and application of roofing and waterproofing contracting standards. Experience with MS Word, Excel and familiarity with CADD Excellent written and verbal communication skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service. Good analytical, troubleshooting, and problem-solving skills.
Language Skills: Ability to read, analyze and interpret general business and technical information, e.g.
professional journals and periodicals, technical procedures, or governmental regulations.
Ability to draft reports, business correspondence and similar documents. Ability to effectively present information and respond to questions from customers, contractors, and architects. Ability to communicate business and technical information (e.g.
information relating to status of projects, remediation plans, and customer concerns) to Sales Representative.
Mathematical Skills: Intermediate skills: ability to calculate figures and amounts such as discounts, interest, commissions, proportions, area, circumference and volume.
Reasoning Ability: High skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
Physical Demands: Ability to climb interior/exterior ladders to access roofs and carry equipment up to approximately fifty pounds over short distances. Ability to walk along roof top edges (i.e., no fear of heights, good balance). Tolerance to exposure to outside weather conditions (heat, cold, etc.).
Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-08 15:11:09
-
JOB DESCRIPTION
Title: SharePoint Help Desk Specialist
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline is part of RPM International Inc., a multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Design, implement, and manage SharePoint solutions that enhance collaboration and productivity across Carboline.
Support internal teams SharePoint sites for various departments, conduct training courses according and create effective applications and workflows.
Essential Functions:
Design, develop, and maintain SharePoint sites, lists, libraries, and workflows to meet business needs Collaborate with cross-functional teams to gather requirements and provide technical solutions that align with organizational goals Implement best practices for SharePoint governance, security, and compliance Provide ongoing support and training for end-users to maximize the effectiveness of SharePoint tools Monitor and troubleshoot SharePoint performance and issues, ensuring optimal user experience Stay current with SharePoint updates and enhancements, evaluating their potential impact on existing solutions Conduct virtual classes on SharePoint functions, features, and best practices for new and current employees Support 8x8 (voip) phone system support and user set up Provide Level 2 help desk support for internal and remote users Backup for Azure user environment, including creating and deleting users, managing access, in tune management Perform additional duties as assigned Commit to the Company's safety and quality programs
Requirements:
3+ years working with SharePoint, including site design, development, and administration.
Proficiency in Power Automate for workflow automation, or similar programs. Experience with SharePoint Framework (SPFx), JavaScript, and REST APIs.
Proficient in utilizing SharePoint features such as lists, libraries, pages, and workflows.
Relevant certifications, such as Microsoft Certified: SharePoint Associate or similar, preferred.
Physical Requirements:
This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day.
No unusual environmental requirements are associated with this position.
Periodically lifts up to 40 pounds.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-05-08 15:11:07
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Building Sciences team will participate in different projects with various scopes of work.
The Field Engineer is responsible for the organization, research, and documentation of cross-departmental assignments supporting the continued growth and operations of Pure Air Control Services, a Weatherproofing Technologies, Inc.
division.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports the Building Sciences Project Manager with test and balance research, consultation, operations policy generation, and quality issues.
Adjust systems controls to settings recommended by the vendor, conduct measurement tests, and discuss system malfunctions with system users to isolate the problems.
Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project.
Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology.
Evaluate current processes and develop innovative approaches for improvement. Write and develop in-house training materials supporting the staff and franchise partners.
Contacts and communicates directly with all levels of company management, staff members, and clients.
CERTIFICATES, LICENSES, REGISTRATIONS: Industry certificates are preferred but not required. Ability to obtain Engineer Intern certification preferred but not required. Bachelor's Degree in an Engineering field (preferred) 3+ years of experience in the HVAC industry, including Test and Balance or Bachelor's degree in an Engineering field.
OTHER SKILLS AND ABILITIES:
Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards.
Understanding of Indoor Air Quality and how it affects the building occupants.
Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing.
Customer service oriented. Proficient computer skills and strong technical writing skills.
Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player.
Ability to travel out of state up to 15% of the time.
The salary range for applicants in this position generally ranges between $58,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-05-08 15:11:07
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Work assigned tasks on a production line making below grade waterproofing material using bentonite and High-Density Polyethylene (HDPE).
Operate and observe machinery used in the production process so that malfunctions can be detected, and supervision can be notified.
Measure material and utilize cutting tools to cut materials to specified length.
Fill pails with manufactured material.
Pack and store manufactured material by rolling materials onto a core, place the roll in a bag, and seal with a wire twist tie.
Shrink wrap or band finished goods.
Rework rejected materials.
Box manufactured accessories for further processing or shipment, following prescribed procedures.
Use a forklift to lift and transfer manufactured materials between work and storage areas.
Sift bentonite that is recycled from floors and rejected materials.
Assist in representing environmental and quality ISO management plans.
Participate in facility projects by performing maintenance and repair work related to the facility.
Utilize, sustain, and audit established Lean Manufacturing processes.
Clean work areas, machinery, and equipment.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT: 1+ Years of related experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic computer skills required.
Attention to detail - this job requires being careful about detail and thorough in completing work tasks.
Selective attention - the ability to concentrate on a task over a period of time without being distracted.
Effective team player with ability to work independently.
Knowledge of machines and tools, including their uses, repair, and maintenance.
ISO knowledge.
Troubleshooting - ability to identify causes of operating errors and determine how to resolve errors.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $15.85 and $18.98 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2025-05-08 15:11:04
-
JOB DESCRIPTION
DAP is looking to hire a Product Development Scientist in R&D Department. As a R&D Scientist, you will perform experiments and generate general test data and analytical data with minimal guidance from senior R&D personnel while learning the basic principles of product development and formulation.
Participate in and help drive activities that improve the operation of the R&D function.
Collaborate with other R&D personnel and participate in cross-functional teams to help drive innovation.
Proven success in previous role.
Responsibilities:
Carry out assigned experimental plans for new product development, product modification, or technology development projects and perform basic analysis of experimental results with minimal guidance of senior R&D Personnel.
Develop and use basic formulation skills.
Display capability to problem-solve in R&D context, troubleshoot and optimize laboratory experiments.
Demonstrate the ability to operate analytical and material characterization equipment, generate high quality data, and organize the data for further in-depth analysis. Assist senior R&D Personnel to develop manufacturing procedures for new products and work collaboratively at plant trials with plant engineers and quality control managers.
Learn to apply basic process steps for Plant Trials. Use the principles of DAP Innovation Processes (Innovation Engineering, etc.) and R&D Management Processes in everyday work. Adhere to Laboratory Quality Management System (QMS) practices and participate in QMS audits.
Assist in laboratory equipment calibration and maintenance.
Use Product Vision to manage data and projects.
Provide deliverables for projects in the Accolade project management system. Assist in providing technical support for marketing, sales, and customer support including planning/conducting product demonstrations for customers, trade shows, Etc.
Adhere to laboratory safety practices and participate in all safety and housekeeping initiatives.
Demonstrate the ability to assemble information for and generate effective written reports and oral presentations to communicate within R&D and with cross-functional teams.
Requirements:
Bachelor of Science degree in Chemistry, Polymer Science, Materials Science, or related field with 5 years' experience of relevant experience A passion for chemistry, science, problem solving, and creativity. Excellent interpersonal, written, and verbal communication and presentation skills. A breadth of technical knowledge and a keen interest in learning from others. Possess innovation skills evident as risk taking, result seeking, and idea integration.
Hands-on bench experience with various chemistries (latex, moisture curing, reactive, etc.) in sealants, adhesives, coatings, repair or related field. Bench chemistry experience and familiarity with various analytical techniques: wet chemistry, titrations, microscopy, rheology, thermal analysis, tensile testing, etc. Experience operating lab scale mixing equipment as well as lab scale analytical and testing apparatus.
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
75,000 to 100,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-05-08 15:11:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Work assigned tasks on a production line making below grade waterproofing material using bentonite and High-Density Polyethylene (HDPE).
Operate and observe machinery used in the production process so that malfunctions can be detected, and supervision can be notified.
Measure material and utilize cutting tools to cut materials to specified length.
Fill pails with manufactured material.
Pack and store manufactured material by rolling materials onto a core, place the roll in a bag, and seal with a wire twist tie.
Shrink wrap or band finished goods.
Rework rejected materials.
Box manufactured accessories for further processing or shipment, following prescribed procedures.
Use a forklift to lift and transfer manufactured materials between work and storage areas.
Sift bentonite that is recycled from floors and rejected materials.
Assist in representing environmental and quality ISO management plans.
Participate in facility projects by performing maintenance and repair work related to the facility.
Utilize, sustain, and audit established Lean Manufacturing processes.
Clean work areas, machinery, and equipment.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT: 1+ Years of related experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic computer skills required.
Attention to detail - this job requires being careful about detail and thorough in completing work tasks.
Selective attention - the ability to concentrate on a task over a period of time without being distracted.
Effective team player with ability to work independently.
Knowledge of machines and tools, including their uses, repair, and maintenance.
ISO knowledge.
Troubleshooting - ability to identify causes of operating errors and determine how to resolve errors.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $15.85 and $18.98 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2025-05-08 15:11:02
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Building Sciences team will participate in different projects with various scopes of work.
The Field Engineer is responsible for the organization, research, and documentation of cross-departmental assignments supporting the continued growth and operations of Pure Air Control Services, a Weatherproofing Technologies, Inc.
division.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports the Building Sciences Project Manager with test and balance research, consultation, operations policy generation, and quality issues.
Adjust systems controls to settings recommended by the vendor, conduct measurement tests, and discuss system malfunctions with system users to isolate the problems.
Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project.
Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology.
Evaluate current processes and develop innovative approaches for improvement. Write and develop in-house training materials supporting the staff and franchise partners.
Contacts and communicates directly with all levels of company management, staff members, and clients.
CERTIFICATES, LICENSES, REGISTRATIONS: Industry certificates are preferred but not required. Ability to obtain Engineer Intern certification preferred but not required. Bachelor's Degree in an Engineering field (preferred) 3+ years of experience in the HVAC industry, including Test and Balance or Bachelor's degree in an Engineering field.
OTHER SKILLS AND ABILITIES:
Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards.
Understanding of Indoor Air Quality and how it affects the building occupants.
Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing.
Customer service oriented. Proficient computer skills and strong technical writing skills.
Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player.
Ability to travel out of state up to 15% of the time.
The salary range for applicants in this position generally ranges between $58,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-05-08 15:10:58
-
JOB DESCRIPTION
Title: SharePoint Help Desk Specialist
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline is part of RPM International Inc., a multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Design, implement, and manage SharePoint solutions that enhance collaboration and productivity across Carboline.
Support internal teams SharePoint sites for various departments, conduct training courses according and create effective applications and workflows.
Essential Functions:
Design, develop, and maintain SharePoint sites, lists, libraries, and workflows to meet business needs Collaborate with cross-functional teams to gather requirements and provide technical solutions that align with organizational goals Implement best practices for SharePoint governance, security, and compliance Provide ongoing support and training for end-users to maximize the effectiveness of SharePoint tools Monitor and troubleshoot SharePoint performance and issues, ensuring optimal user experience Stay current with SharePoint updates and enhancements, evaluating their potential impact on existing solutions Conduct virtual classes on SharePoint functions, features, and best practices for new and current employees Support 8x8 (voip) phone system support and user set up Provide Level 2 help desk support for internal and remote users Backup for Azure user environment, including creating and deleting users, managing access, in tune management Perform additional duties as assigned Commit to the Company's safety and quality programs
Requirements:
3+ years working with SharePoint, including site design, development, and administration.
Proficiency in Power Automate for workflow automation, or similar programs. Experience with SharePoint Framework (SPFx), JavaScript, and REST APIs.
Proficient in utilizing SharePoint features such as lists, libraries, pages, and workflows.
Relevant certifications, such as Microsoft Certified: SharePoint Associate or similar, preferred.
Physical Requirements:
This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day.
No unusual environmental requirements are associated with this position.
Periodically lifts up to 40 pounds.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-05-08 15:10:55
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-08 15:10:54
-
JOB DESCRIPTION
Essential Functions
Stage and prepare all raw materials associated with production batches. Maintains orderliness and cleanliness in batch making and packaging areas, with active engagement in positive safety behavior. Communicates (gives a heads up) low levels of raw material to supervisory staff. Develops good working knowledge of all batch making and packaging processes. Maintains good working relationship with Quality Control Must be capable of logical structuring of batch making process, particularly optimizing the switchover sequence/needs of production. Reports all spills and leaks, equipment malfunctions, safety hazards, accidents, near miss accidents and material shortages to Production Supervisor Makes batches and operates packaging equipment efficiently.
Capable of handling scanner & basic computer operations When there is downtime on his line, proceeds to line assigned to him by Production Supervisor for further training or operation. Assist in hazardous waste handling when needed under the guidance from production management/supervisors or RCRA
Minimum Requirements
High school diploma or GED Minimum 2-year prior related experience of 1 year experience as a production batch maker.
Preferred Requirements
College level chemistry course experience.
Physical Requirements
Must pass standard eye examination (corrected or uncorrected) and must pass standard color-tone testing. Must be capable of wearing Company standard respirators as qualified by fit test performed by an authorized agency. Must be capable of lifting between 25-70 lbs. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances. Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2025-05-08 15:10:53
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Filler/Packager is responsible to fill product using at least one of the different types of packaging machines.
The operator will organize the area, collect materials such as pails, cans, cartridges or films, and set up the filling and packaging equipment.
Responsibilities include gathering required labels and casing materials.
Production Order card must be read and followed exactly as to correct packaging including labeling of cans and cases, etc.
Operator is responsible to report correct counts of production for the shift and report downtime information.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Neatly assemble and place all required materials from the fill card to be used in their appropriate location throughout the shift. Read and follow filling procedures to package material into cartridges, chubs, or one, two and five-gallon units. Follow and meet the established production schedules. Properly use the filling equipment and maintain cleanliness of the work area following written standard operating procedures. Assist in the waste segregation and recycling program. Communicate written and verbal information between the Foreman and Production Manager. Use appropriate safety equipment and follow established safety regulations. Track progress throughout assigned shift by completing overall equipment effectiveness documents.
EDUCATION:
No high school diploma required.
EXPERIENCE:
No prior experience or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred, or willing to obtain.
OTHER SKILLS AND ABILITIES:
Must be able to lift 50 pounds. Basic computer skills required (Windows familiarity). LEAN and VFM (Visual Factory Management) skills and/or willingness to train. Ability to manage multiple priorities. Effective team player, self-motivated, and quick learner. Ability to read, write and comprehend batch making processes.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-08 15:10:45
-
JOB DESCRIPTION
WTI/Pure Air Controls Services Estimating Engineer Job Description
Engineer (Preconstruction)
General Purpose:
To assess project requirements, gather technical data, and provide accurate cost estimates for HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with estimating skills to ensure that HVAC projects are planned and budgeted effectively.
Here are the primary purposes and responsibilities of a Preconstruction Engineer:
Responsibilities and Duties:
Determines scope, designs solutions and estimates cost of HVAC restoration projects. Understands components and function of existing mechanical systems that are being altered or renovated. Develops a project scope of work through site visits and discussions with owner / facility staff Exercises control over design and production tasks to enable HVAC restoration projects. Drafts construction documents and generates specifications for HVAC restoration projects. Utilizes in-house estimating tools to create project budgets. Assists sales team with scope reviews and support as needed. Creates, maintains, and improves estimating tools. Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
Conducts on-site visits and assessments to understand the scope and technical intricacies of specific projects.
This includes evaluating existing HVAC systems, identifying any issues or challenges, and gathering data needed for precise estimation. Ensures a smooth transition from estimation to project execution, providing technical guidance and insights as needed.
Qualifications Bachelor's degree or equivalent experience. 3+ years of industry-specific experience. Experience with construction drafting in AutoCAD. EI certification with ability to obtain PE license preferred. Advanced Microsoft Office Suite knowledge preferred. Experience with programming language (VBA, C#, etc.) preferred Experience with cloud based platforms (Pro-Core, E-Builder, iAuditor, etc) preferred. Ability to travel out of state up to 25% The salary range for applicants in this position generally ranges between $88,000 and $110,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-05-08 15:10:44
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Filler/Packager is responsible to fill product using at least one of the different types of packaging machines.
The operator will organize the area, collect materials such as pails, cans, cartridges or films, and set up the filling and packaging equipment.
Responsibilities include gathering required labels and casing materials.
Production Order card must be read and followed exactly as to correct packaging including labeling of cans and cases, etc.
Operator is responsible to report correct counts of production for the shift and report downtime information.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Neatly assemble and place all required materials from the fill card to be used in their appropriate location throughout the shift. Read and follow filling procedures to package material into cartridges, chubs, or one, two and five-gallon units. Follow and meet the established production schedules. Properly use the filling equipment and maintain cleanliness of the work area following written standard operating procedures. Assist in the waste segregation and recycling program. Communicate written and verbal information between the Foreman and Production Manager. Use appropriate safety equipment and follow established safety regulations. Track progress throughout assigned shift by completing overall equipment effectiveness documents.
EDUCATION:
No high school diploma required.
EXPERIENCE:
No prior experience or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred, or willing to obtain.
OTHER SKILLS AND ABILITIES:
Must be able to lift 50 pounds. Basic computer skills required (Windows familiarity). LEAN and VFM (Visual Factory Management) skills and/or willingness to train. Ability to manage multiple priorities. Effective team player, self-motivated, and quick learner. Ability to read, write and comprehend batch making processes.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-08 15:10:42
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-08 15:10:42
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Description:
Legend Brands is hiring a CNC Machinist Assistant for our Prescott AZ location.
Perform all machining operations required to produce finished products from a variety of raw materials such as stainless steel, aluminum, etc.
Job Requirements:
Operate machines in accordance with established procedures and guidelines Read and interpret blueprints and diagrams to select, position, and secure machinery Use calipers or other measuring instruments in order to perform quality control checks on parts in process and upon completion Load parts in machine, cycle machine Detect and report malfunctions in machine operation Run production lots Perform daily maintenance on machinery Communicate with co-workers regarding production runs Maintain safe, organized work environment as well as cleanliness of the equipment Perform necessary tasks and paperwork for the proper movement and control of parts
Qualifications:
Prior CNC Machine operations experience or certification Ability to use tools and machinery Ability to perform inspection of machined parts Computer skills to run CNC programs Self-starter Ability to learn CNC machine programming for basic operation
Hiring Range:
Between $19.00 - $22.50 per hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 31, 2025 or until filled.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-05-08 15:10:42
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Description:
Legend Brands is hiring a CNC Machinist Assistant for our Prescott AZ location.
Perform all machining operations required to produce finished products from a variety of raw materials such as stainless steel, aluminum, etc.
Job Requirements:
Operate machines in accordance with established procedures and guidelines Read and interpret blueprints and diagrams to select, position, and secure machinery Use calipers or other measuring instruments in order to perform quality control checks on parts in process and upon completion Load parts in machine, cycle machine Detect and report malfunctions in machine operation Run production lots Perform daily maintenance on machinery Communicate with co-workers regarding production runs Maintain safe, organized work environment as well as cleanliness of the equipment Perform necessary tasks and paperwork for the proper movement and control of parts
Qualifications:
Prior CNC Machine operations experience or certification Ability to use tools and machinery Ability to perform inspection of machined parts Computer skills to run CNC programs Self-starter Ability to learn CNC machine programming for basic operation
Hiring Range:
Between $19.00 - $22.50 per hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 31, 2025 or until filled.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-05-08 15:10:06
-
We're recruiting on behalf of a leading UK defence technology organisation, delivering advanced engineering solutions for naval and maritime applications.
Their systems support critical missions across allied defence forces, with a focus on innovation, precision, and performance in the most challenging environments.This is a fantastic opportunity for a Mechanical Engineer with experience in complex enclosure design to join a collaborative, multi-disciplinary team working on cutting-edge maritime technology.The Role
Develop mechanical design concepts and feasibility studies for new and existing products
Lead the design of complex enclosures used in subsea, naval, and defence applications
Work closely with electrical, systems, and manufacturing engineers to deliver integrated solutions
Contribute to proposals and R&D initiatives that support future business opportunities
What You'll Need
Degree (or equivalent) in Mechanical Engineering
Solid experience with 3D CAD tools - ideally AutoCAD Inventor
Understanding of manufacturing methods for electrical enclosures (fabrication, machining, castings, welding, coatings)
Strong grasp of materials selection and mechanical design under requirements like thermal, EMC, and shock
Excellent communication skills and the confidence to present ideas and designs to stakeholders
A proactive, self-motivated approach with a willingness to learn and shape future processes
Security Clearance: You must be eligible to obtain UK security clearance
Why Apply?
Work on technologies that protect and support naval missions around the world
Be part of a forward-thinking company that values work-life balance and flexible working
Enjoy every other Friday off with a 9-day fortnight
Join a diverse, inclusive team with a supportive culture and exciting growth plans
If you're an experienced engineer ready to make an impact in a high-tech, mission-critical sector — we want to hear from you. Apply now to take the next step in your engineering career. ....Read more...
Type: Permanent Location: Loudwater, England
Posted: 2025-05-08 14:43:28
-
Plater Welder Location: Wissington PE33
Hours: Monday to Saturday 0700 - 1730
Up to 60 hours per week
Immediate start
Long term contract
Are you a skilled Plater Welder or Fabricator looking for your next opportunity? Were working with a well-established and growing engineering firm in Wissington who are looking to add to their friendly team.
This role offers great rates of pay, steady day shifts, and the opportunity to go permanent for the right person.
What Youll Be Doing
- Working from detailed engineering drawings
- Working on site
- Plating and welding 316 stainless steel
- Fabricating components to a high standard
- Reporting to the Fabrication Manager
- Occasionally working independently on varied jobs and materials
What We're Looking For
- Apprentice-trained or time-served welder/fabricator
- Previous experience working on site
- Strong background in plater welding and fabrication
- Confident reading technical drawings
- 3+ years experience working with stainless steel
- Fitting experience is a plus, but not essential
- Someone who can hit the ground running and work on their own initiative
Why Youll Love It Here
- Excellent hourly rate - up to£24.75 per hour UMB or CIS
- Overtime paid at a premium
- Great team environment and solid support from day one
Interested? Lets talk! Call Sharon Pickering on 0116 254 5411 between 8 am - 5 pm to discuss your experience and the next steps.
Or click Apply Now and well be in touch to chat through your CV.
Ref: Plater Welder / Fabricator
INDTEMP ....Read more...
Type: Contract Location: Downham Market,England
Start: 08/05/2025
Duration: 1.0 HOUR
Salary / Rate: £24.75 per hour
Posted: 2025-05-08 13:54:03
-
An exciting opportunity has arisen for an Occupational Hygiene Technician to join a leading Healthcare Company.
This full-time role offers excellent benefits and a competitive salary.
As an Occupational Hygiene Technician, you will be covering personnel and site activities involving various chemical, physical, and biological agents.
You will be responsible for:
* Participate in occupational hygiene investigations and studies.
* Perform regular workplace inspections to assess hygiene-related aspects.
* Assist in the preparation and delivery of training and information materials on occupational hygiene.
* Contribute to occupational hygiene performance reports.
What we are looking for:
* Previously worked as a Occupational Hygiene Technician, Health and Safety Coordinator, Health and Safety Assistant or in a similar role.
* Ideally have at least 3 years work experience in industrial and/or construction environments.
* Affiliate membership of the Faculty of Occupational Hygiene (AFOH) and working towards CertOH would be preferred, training provided.
* Hold a degree in a STEM-related subject area.
* Skilled in IT (Microsoft Office 365 and Teams).
Shifts:
* 8am - 4pm
* 3pm - 11pm
* 10pm - 6am
Apply now for this exceptional Occupational Hygiene Technician opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Bridgwater, England
Start:
Duration:
Salary / Rate: £24000 - £30000 Per Annum
Posted: 2025-05-08 11:38:55
