-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training both on and off the roof.
They oversee large self-performed projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper roof repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work. Provide a variety of technical and application training sessions in both field and shop settings. Provide hands-on application training and supervision of roof coatings and installation. Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to: Peel tests Product testing Product recommendations Proper product installations Post project completion inspection to ensure quality workmanship and proper utilization and application of materials. Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation. Conduct roof inspections, providing written reports and photo documentation. Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed. Review and train on large warranty adjustment projects over ten (10) man days. Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team. Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable. Complete weekly/monthly activity reports as requested. Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities. Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager. Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of roofing, roofing repair, troubleshooting, or field service experience. Working knowledge of commercial roofing systems, including built-up, modified, single ply, and metal. Working knowledge of roof coating systems.
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude. Prior experience in a field service leadership role. Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems) In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line. This position is an autonomous role and requires self-motivation to manage a high level of independence. Strong work ethic and ability to multitask.
Experience working with various types of technology and software. Must have a valid driver's license and a clean driving record.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Huntsville, Alabama
Posted: 2025-09-16 07:10:35
-
JOB DESCRIPTION
Essential Functions:
Responsible for oversight and execution of all elements of regional installer recruiting, development and management Direct management of Quality Assurance Manager and Installation Coordinator, including hiring, training and performance management. Responsible for recruitment of installation resources as needed to sufficiently meet regional installation demands, including orientation and on-boarding. Responsible for quarterly administration and reporting to construction division leadership and sales management on regional manpower utilization.
This includes capacity tracking; installer needs and use of surge installers to meet demand. Conducts required field rides and coaching trips with direct reports and Installers as needed. Adjudication/mediation for installer issues. Conducts weekly regional operations team calls. Coordinates with RCM/GM on annual installer review meetings. Reviews project SOW/Work Orders for installations as needed. Works with Superintendents and TMs for installer scheduling, development and management within region. Support RCM/AM with training needs of Superintendents and TMs. Spends at least three days per week in the field, working with team members including training/on-boarding and management of installation partners. Tracking and support for all global account installations within the region, confirming execution in alignment with Global Accounts Management.
Minimum Requirements
B.S.
Degree in Engineering (Industrial, Mechanical or Civil) or Construction Management preferred.
In lieu of a degree, a combination of experience and education will be considered. A proven ability to manage projects and clearly communicate key project details.
Demonstrates the ability to lead and organize a team. Experience working with general contractors and subcontractors. Excellent written and verbal communication skills.
Proficiency with Microsoft Office Suite Spend at least three days per week in the field Required travel can be up to 50%/time in the field. Must possess reliable transportation Valid Driver's License
Physical Requirements:
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk and reach with hands and arms. The employee is occasionally required to sit, stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly lift and/or move up to 10 points; frequently lift and/or move up to 20 pounds; and occasionally lift and/or move up to 50 pounds. This position requires wearing of hard hat, safety glasses, gloves, steel-toed boots, high-visibility vest, and depending on the task, may also require ear protection, respirators, safety harnesses, and specialized protective clothing, while on the worksite.
Preferred Requirements:
Two to Five years' experience in a Stonhard sales territory, sales management, or construction management with demonstrated leadership and communication skills.
Five (5) related experience working with industrial and commercial projects. Apply for this ad Online! ....Read more...
Type: Permanent Location: Denver, Colorado
Posted: 2025-09-16 07:10:03
-
E3 Recruitment is looking to recruit a Production Operative, to join a well-established leading manufacturing business at its facility in the Birtley area of Chester-le-Street.Within this position, you will be responsible for operating manufacturing machinery and the manual packing of products.
Full training is provided for operating machinery specific to this role.What's in it for you as a Production Operative? , Pay rate of £12.21 ph with overtime paid a premium , Hours of work: Monday - Friday DAYS ONLY 6AM - 2PM (early finish Friday at 1PM) , 39 hours a week , Overtime paid at a premium of 1.5x and 2x , Location: Birtley , Full training and development, including FLT license , On-going temp to perm opportunity with a well-established PLC manufacturer.Duties of Production Operative: , Manual handling and the use of mechanical lifting aids , Operating production machinery , Hand blending , Cleaning of moulds , Preparing product mixes , The manual packing and movement of heavy products , 5S's general housekeeping , Work following local Health & Safety Standards.Requirements of the Production Operative: , Ideally worked within a production environment , Operating production machinery and lifting heavy materials , A Forklift Truck license is desirable but not essential, as training will be provided.
If you are interested in the Production Operative vacancy, please apply now! ....Read more...
Type: Contract Location: Birtley, England
Start: ASAP
Salary / Rate: Up to £12.21 per hour + Overtime at a premium
Posted: 2025-09-15 17:22:12
-
Mechanical Fitter
Stoke On Trent
£36'000 - £43'000 ( OTE £52'000) + Commission + Holidays + internal Training + External Training + ‘immediate Start' + Company Van + Fuel Card + Pension
Have a passion for mechanical work? If so, this is a great chance to step into a Mechanical Fitter role within the calibration department.
Work a varied role with a industry leader known for the quality of service covering a local patch.
Have the chance to earn well through commision also!
My client offers calibration services to a variety of customers across the UK and due to growth they require a Mechanical Fitterto join this tight knit team where you will be looked after and treated how employees should be.
Your Role As A Mechanical Fitter Will Include
* Calibration On A Variety Of Equipment
* Mobile Role!
* Consistent Technical Training On Specific Company Equipment
* Progression Into Field / Senior Positions
As A Mechanical Fitter You Will Have:
* Mechanical Bias
* Field Service Engineering Experience / Workshop Engineer
* Clean Driving License
Keywords: Mecanical Fitter, Mechanic, Workshop Engineer, Calibration Engineer, Mechanical Engineer, Ex forces, Navy Engineer, Field Service Engineer, Mobile Engineer, Field Engineer, Garage Equipment, Hydraulics, Calibration Engineer, Technician, Engineer, Stafford, Stoke on trent, shropshire, Cannock
Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
-- ....Read more...
Type: Permanent Location: Stoke-on-Trent, England
Start: ASAP
Salary / Rate: £36000 - £43000 per annum + OTE ( £55'000 )+Progression+Training
Posted: 2025-09-15 17:12:19
-
Mechanical Estimator Dartford £50,000 - £55,000 + Family Feel + Staff Retention + No Overtime + Minimal Travel Are you tired of working for companies with a revolving door? Step into a career with an employer that values loyalty, rewards hard work and keeps their people for the long term.
This is an exciting chance for a Mechanical Estimator to become part of a growing company with a family feel, a welcoming environment, and the chance to make a real impactOperating from their main office, they've become one of the most sought-after subcontractors in the HVAC space, trusted by clients for their great service and reliability.
Joining the team as a mechanical estimator means more than just taking on a role, it's an opportunity to step into a stable position with clear progression routes, long term security, and the chance to be part of a company that genuinely values its people.Your Role as a Mechanical Estimator will include:
Carrying out site surveys and attending tender review meetings with clients.
Preparing and submitting tenders for projects up to £2.5 million.
Managing supply chain correspondence and enquiries.
The successful Mechanical Estimator will need:
Demonstrated experience in a similar role within a mechanical contractor or the M&E division of a main contractor.
Proven ability to produce accurate cost and timescale estimates to meet project deadlines.
Strong skills in interpreting technical drawings, design briefs, and scope of works documentation.
Keywords: Estimator, HVAC Estimator, Mechanical Estimator, M&E Estimator, Building Services Estimator ....Read more...
Type: Permanent Location: Dartford, England
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-09-15 16:59:59
-
A Mechanical & Electrical company is seeking Pipe Fitters and Pipe Welders for various projects located in London and the South East, with an immediate start.Salary: £320 per day Start Date: ASAP Work Arrangement: Permanent (6-month probationary period) Benefits:
21 days holiday, increasing by 1 day every 2 years of service, up to a maximum of 25 days, plus statutory days.
Pension scheme - Auto enrolment
Employee Assistance Programme
Life insurance
Employee Referral Scheme
Staff Discounts
Company Van, Mobile Phone, and Uniform provided
Additional Information:
6-month probationary period
45 hours per week, 7am - 4pm, Monday to Friday
Paid weekly via BACS
Essential Qualifications/Skills:
Relevant City and Guilds Level 2 or 3 Qualification
Full UK Driving Licence
Key Responsibilities:
Maintain daily site logs, take site inductions, and ensure that paperwork is updated within the site folder.
Install commercial boiler rooms, including boilers, pumps, and mild steel welded and screwed pipework.
Fit copper and stainless-steel press-fit pipe and fittings ranging from 15mm - 108mm.
Install mild steel screwed pipework and fittings from 20mm - 150mm.
Interpret pipework schematic drawings and install according to these, where available.
Complete small to medium-sized boiler room and heating/hot water installations without the assistance of pipework drawings.
Install and hang various styles of radiators and fan convectors, including low surface temperature types.
Previous experience working in schools with an understanding of the associated risks of working in educational premises.
Drain and refill heating systems to replace leaking pipework and isolation valves.
Ensure compliance with the Health and Safety at Work Act (including risk assessments and asbestos awareness).
Overcome day-to-day challenges such as pipework routes and material availability on-site.
Welder Requirements: Pre-fabricate sections of pipework and perform positional welds when required.
Ideal Candidate:
Strong practical and problem-solving skills.
Clear understanding of commercial heating installations and hot and cold-water services.
Ability to work as a lead engineer.
Experience working in commercial buildings and educational establishments.
Commercial gas ACS qualifications (preferred but not essential).
SSSTS or SMSTS qualification (current).
Class two MMA welding certification (up-to-date).
Self-motivated with good organizational skills.
Asbestos awareness.
Flexible approach to work, especially in schools and commercial buildings, as you may be required to work outside regular hours (evenings and weekends), paid at overtime rates.
Knowledge of risk assessment processes.
Takes pride in their work and is a team player.
Please apply with your most up-to-date CV, and you will be contacted. ....Read more...
Type: Permanent Location: South East London, England
Start: ASAP
Salary / Rate: Up to £320 per day
Posted: 2025-09-15 16:38:33
-
An exciting opportunity has arisen for a skilled Production Engineer to join a growing, forward-thinking organisation at the heart of a global engineering sector.
Based in Halifax, West Yorkshire, this innovative manufacturer is offering a generous salary, benefits package and continued progression opportunities to the right person.
Reporting directly to the Operations Manager, the Production Engineer will play a key role in optimising manufacturing processes, improving efficiency, maintaining high-quality standards, and supporting a growing product range across multiple engineering disciplines.
Key Responsibilities of the Production Engineer
Improve production workflows and eliminate waste.
Ensure adherence to quality standards through the development and execution of test procedures.
Maintain and oversee production equipment and machinery to minimise downtime.
Analyse operations for cost efficiency and contribute to continuous improvement initiatives.
Support the production floor and provide hands-on troubleshooting and technical guidance.
Essential Skills & Experience of the Production Engineer
Proven experience as a Production or Manufacturing Engineer within a quality-critical environment.
Strong mechanical/machining background with excellent knowledge of related strategies and processes.
Proficient in interpreting and controlling engineering drawings.
Skilled in SolidWorks (or similar CAD software) and Microsoft Excel/Word.
NVQ Level 3 or equivalent in Mechanical/Electrical Engineering or a related field.
Practical experience with machining, sheet metal fabrication, 3D printing, and laser cutting.
Confident sourcing components, estimating costs, and managing supplier relationships.
Comfortable demonstrating products to internal teams and external stakeholders.
What's On Offer to the Production Engineer
Competitive salary of £38,000
Company pension and life insurance
Health support plan
Annual profit-based bonus scheme
24 days holiday + your birthday off + bank holidays
Free on-site parking
Opportunities for long-term development in a growing business
Hours: 37.5 per week 7.30 - 3-30
This is a fantastic chance for a hands-on, pragmatic Production Engineer looking to contribute to meaningful work in a mission-driven company.
If you would be interested, please click apply or contact Conor Wood at E3 Recruitment
....Read more...
Type: Permanent Location: Brighouse, England
Start: ASAP
Salary / Rate: Up to £38000 per annum + + Extensive Benefits Package
Posted: 2025-09-15 14:35:51
-
An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines.
They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line.
Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion. ....Read more...
Type: Permanent Location: Great Yarmouth, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-09-15 14:28:49
-
Senior Mechanical Engineer - Biotech Mechatronics - Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD.
Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows.
Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it's like to wear multiple hats when needed.
Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives.
I can provide more details once you have made an application.
Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I'm expecting a lot of interest in the role.
So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: bonus, enhanced pension
Posted: 2025-09-15 13:09:16
-
Medical Devices Consultant - Senior Mechanical Engineer - Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role.
The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology.
Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties.
Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices.
Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required.
However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector.
Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly.
The organisation is open to candidates with varying levels of experience.
If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 13:08:28
-
Principal Mechanical Design Engineer - Medical Devices - Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists.
Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career.
In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills.
Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 13:08:03
-
Embedded Software Engineer - Security Clearance - Cambridge
A growing spinout security technology company, based in Cambridge, is currently seeking an experienced Embedded Software Engineer to assist with the development, modification, and enhancement of various security technologies.
Your focus will span across radio, satellite, communications, radar, sensors, and other complex technologies used in the defence, aerospace, telecommunications, and other cutting-edge sectors, where you will contribute to the development of new technologies.
You will collaborate with a team of experts, including electronics design engineers, software engineers, mechanical engineers, physicists, and other specialists.
You won't necessarily need prior experience in the specific sector, as this is trainable, but you should have substantial experience in developing embedded systems using C/C++ programming languages.
This company provides bespoke products and services for clients, ensuring that your projects will always be unique, presenting their own set of problems and challenges to keep you engaged.
In addition to client projects, you will be involved in developing new versions of existing technology and improving current versions, offering a diverse and engaging role that will keep you interested for the long term.
While experience in telecommunications, aerospace, scientific, radar, radio, or other complex technologies that involve communication between devices would be ideal, it is not essential.
Your experience as an Embedded Software Engineer is more crucial than the specific sector.
Certain roles may require security clearance, typically necessitating a British passport with no criminal record or a history of residing in the UK and paying taxes for several years (also with no criminal record).
This role has arisen due to the company's growth.
They take pride in investing in their staff by providing continuous training to support your career development.
They have received awards for their commitment to staff development.
In addition to award-winning training, career growth, and varied and unique work, you will receive a competitive starting salary, bonuses, pension contributions, medical insurance, life assurance, free parking, and other excellent benefits.
There are currently several openings for Embedded Software Engineers within the company, so they will consider candidates with different levels of experience, from those early in their careers to senior candidates with years of experience.
Salary will be determined based on experience, and there may be new roles approved in the future.
If you are interested, we recommend submitting your application now to avoid missing out.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 13:07:34
-
Embedded Software Consultant - Defence - Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C.
Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors.
It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles.
The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company's natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you.
Please note we will not be able to discuss the role specifics until we have a copy of your CV. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 13:07:06
-
Senior Electronics Engineer - Medical Devices Invention - Warwick
A growing Medical Devices company are currently seeking an experienced Electronics Engineer to contribute to the invention and development of brand-new Medical Devices.
Based in the Warwick area, you will be involved in developing cutting-edge technologies.
Working alongside physicists, mechanical engineers, scientists, and other Medical Devices experts, you will be involved in creating lifesaving and life-improving Medical Devices.
You should have a background in designing and developing Medical Devices to ISO 13485, IEC 62304, and EN 60601 standards.
It would be beneficial if you have experience on various types of Medical Devices during your career, such as Medical Robotics, Wearable Diagnostics, Injectable Treatment and other complex Medical Devices with electronics design at the core of the technology.
To be successful in the role, it is expected that you would hold a degree in electronics, physics, or other subject that enabled you to work on the electronics design of medical devices.
In addition to working on the latest areas of Medical Devices and Healthcare Technology, you will also be rewarded with an excellent starting salary, bonus, pension, healthcare, and other outstanding benefits that are not typically available with most companies.
This is an exciting role where you can focus on new types of Medical Devices, so I anticipate a lot of interest.
If you are interested, I suggest you submit an application now or risk missing out.
You will be on-site five days a week; hybrid or remote working is not currently possible.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Biotech recruitment specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Warwick, England
Salary / Rate: bonus, enhanced pension
Posted: 2025-09-15 13:00:42
-
Senior Quality Engineer - Cambridge - Medical Devices
We are currently looking for a Senior Quality Engineer for a growing Medical Devices organisation based in Cambridge.
The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals.
Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation.
If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career.
However.
if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:58:52
-
Product Design Mechanical Engineer - Medical Device - Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development.
However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career.
While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement.
Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Warwick, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:58:01
-
Mechanical Engineer - Cancer Instrumentation - Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation.
Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation.
However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies.
You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:57:00
-
Electronics Engineer - Cancer Instrumentation - Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices.
While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards.
You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients.
However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success.
They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:56:35
-
Machine Learning Engineer - Defence Sector - Cambridge
A growing organisation within the Defence Sector, based in Cambridge, is currently seeking a skilled Machine Learning Engineer or Artificial Intelligence Engineer to contribute to the ongoing development of defence, security, and intelligence technologies.
This is an expanding organisation offering intriguing career development opportunities based on success.
You will work on a variety of projects, ranging from small individual initiatives to large ongoing projects, where you will collaborate with mechanical engineers, electronics engineers, inventors, scientists, and other industry experts.
Given that you will be working on cutting-edge technologies with potential applications in corporate and national security measures, the ability to obtain security clearance is necessary.
Ideally, you will have experience in Machine Learning or Artificial Intelligence projects spanning several years.
While experience in the defence sector would be highly advantageous, it is not a strict requirement.
What makes this organisation truly fascinating is its structure, which enables you to tackle some of the world's most intriguing problems without the bureaucratic hurdles often encountered in larger organisations.
It is expected that you hold a degree that has prepared you for a role in Machine Learning or Artificial Intelligence.
In addition to working on highly challenging and captivating projects, you will receive a competitive salary, bonuses, pension benefits, complimentary meals, health insurance, ongoing skills training, and other outstanding perks.
If you seek daily challenges and the opportunity to work on projects at the forefront of the ML/AI field, we encourage you to apply now, as we anticipate significant interest in this role.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:56:14
-
Electronics Engineer - Piezoelectronics - New Product Development - Cambridge
A growing Scientific Engineering organisation is currently seeking an Electronics Engineer to assist in the product development of new piezoelectronics technologies.
You will collaborate with a team of mechanical design engineers, software engineers, and scientists, making teamwork crucial.
In this role, you will be the sole electronics specialist, so confidence in your abilities is essential.
Your responsibilities will include electronics design and PCB layout for the new piezoelectronics devices, as well as writing Embedded C software and using other software languages.
While having experience in piezoelectronics would be ideal, it is not a strict requirement.
However, we do prefer candidates with experience in highly regulated fields such as Medical Devices, Biotechnology, Scientific Engineering, Pharmatech, or other scientific domains.
While working on cutting-edge technologies, you will also enjoy an excellent starting salary, a generous pension, annual bonuses, private medical cover, life assurance, and other benefits typically associated with larger organisations.
Given the expected high level of interest in this role, we recommend submitting your application promptly if you are interested.
We are looking for someone to start relatively soon, though we understand that you may have a notice period.
The interview process will be swift, commencing with a video interview and progressing to an in-person interview.
Part of the interview may involve a tour of their state-of-the-art facilities, which are currently being expanded to stay at the forefront of technological advances.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will get in touch with you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:55:45
-
Medical Devices - Senior Mechanical Design Engineer - Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards.
If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks.
Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications.
We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects.
Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector.
In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience.
Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience.
If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified.
If you are interested in exploring this role, we recommend submitting your application and CV.
Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240.
Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:54:59
-
Electronics Design Engineer - Medical Devices FPGA - Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices.
However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering.
Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-09-15 12:54:27
-
Embedded Software Engineer - Biotech or Medical Devices - Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: bonus, enhanced pension
Posted: 2025-09-15 12:38:33
-
A Service Engineer paying £36,000, Overtime paid at 1.5, Van, Fuel Card, Laptop, Mobile phone, private medical insurance, full training is given.
8am - 5pm,(Monday to Thursday early finish on a Friday).
A large ‘blue chip' Multinational company are recruiting for a Service to work ‘on site' one of their customers manufacturing facilities.
The functions of the role would be to inspect, repair, provide preventative maintenance to compressors, blowers and pumping systems upon vehicles - full training given.
Location of the service Engineer position: Aylesbury A van is provided for the role as occasional breakdowns would need to be attended to.
We would be very keen to speak to people that have experience working in the following roles: HGV Fitter, Plant Fitter, Hydraulic fitter, Vehicle technicians, Aircraft Engineers, Mechanical fitter, Compressor engineer, HGV Technicians.
Water treatment and pump backgrounds.
Main of the Service Engineer role:
Provide an after-sales product support
Repair equipment and vehicles at depot or on-site as required to ensure conformance with manufacturer's specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times.
Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including reports, inspections, calibrations checks and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings.
We would be very keen to speak to people who have experience with:
Diagnostic analysis, repairs or preventative maintenance
Knowledge of hydraulics and pneumatics
Providing breakdown assistance both at the depot and off-site at vehicle location.
Other responsibilities include but are not limited to: onboard vehicle smart system maintenance, vessel integrity, light body repairs, and general vehicle repair.
Benefits of the Service Engineer position: £36,000Overtime paid at 1.5.
Van Laptop Mobile phone private medical insurance, full training given Alternatively, if you want a private chat about the service Engineer position before submitting your application then please call or email RODGER MORLEY at E3 Recruitment.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Salary / Rate: Up to £36000.00 per annum
Posted: 2025-09-15 10:52:21
-
Holt Executive are delighted to be partnered with a global leader across the Communication and technology space to support a critical Spectrum/ Regulatory Engineering position.
Our partner provides resilient, lifesaving Communications across a number of critical sectors around the world.
With over 40 years of experience our partner has been investing and developing future Communications solutions to support the unconnected.
For the Spectrum / Regulatory Engineering hire, our partner is looking for a diligent and proactive tactical thinker who can work independently and a part of a team.
Key Responsibilities for the Spectrum / Regulatory Engineer:
- Participate in national preparations for World Radiocommunication Conferences (WRCs) and ITU-R Working Parties
- Represent in regulatory committees and working groups on frequency allocation and spectrum sharing matters, for example the International Telecommunication Union (ITU) and regional organizations
- Represent in standardization bodies, such as 3GPP and ETSI
- Develop positions, strategies and input contributions for meetings
- Provide technical support on market access and business development activities
- Advise market development, commercial and engineering teams, as well as senior management, on regulatory opportunities and risks
- Plan and carry out ITU frequency coordination of networks in various frequency bands, including L-band, S-band, C-band, Ka-band and Q/V-band
- Prepare strategy for frequency coordination and orbital slot acquisition
Key Experience and Qualifications for the Spectrum / Regulatory Engineer:
- Bachelors Degree in Electrical Engineering, Science, Maths or another related technical discipline and 5+ years of professional relevant experience
- Knowledge of satellite communications systems (link budgets, general radio theory and basic orbital mechanics), national and international spectrum regulations, policies and spectrum regulatory, registration and coordination processes
- Knowledge of non-satellite wireless products, services and technologies
- Experience of working in international regulatory and standardization for a, such as ITU
- Understanding of policy and regulatory issues in the satellite sector, especially with regard to licensing and market access
- Knowledge of broadband communications, and radiofrequency spectrum technology
- Programming and interference analysis skills
If your skills and experience match this Spectrum / Regulatory Engineer opportunity, we encourage you to apply by sending your resume to info@holtexecutive.com. ....Read more...
Type: Permanent Location: London,England
Start: 15/09/2025
Salary / Rate: Competitive
Posted: 2025-09-15 10:27:04
