-
Electronics Design Engineer required to work on RF Antenna terminals for airborne, border protection and maritime communications in the defence avionics and mobile wireless networking industries.
You will join a team working at the cutting edge of RF and Microwave Ku/Ka, GNSS and LTE satellite phased array system design and development.
Technical environment
Electronic Circuit Design and layout, Schematic Design, safety critical electronics, Altium, satellite terminals, Analogue, DC low frequency circuits, SPICE, satellite phased array RF systems, RFIC, line-up, PCB, digital electronics, FPGA, ASIC, SD modems, mixed signal, RFSoC, Algorithms, Digital Signal Processing, RTL Design, Filter Design, High Frequency Electronics, ANSYS HFSS, High speed, ADC, DAC, serial communications, Audio, signal conditioning, programmable logic design, Xilinx and Altera, RFID, EMC, ESD.
Your primary contribution will be PCB hardware satellite terminal design ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £90000 Per Annum None
Posted: 2026-01-03 14:23:15
-
Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems.
You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed. ....Read more...
Type: Permanent Location: Greenford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £58000 Per Annum None
Posted: 2026-01-02 17:47:52
-
Battery Test Equipment Service and Calibration Engineer required to repair and calibrate AC and DC Power Sources and Loads, Battery Test Equipment, and related equipment on premises and customer sites across the UK.
You will also contribute to UKAS accreditation calibration procedures for new equipment and accreditation scope expansion.
Experience
Over 2 years hands on Calibration and Instrumentation experience in servicing, testing, and calibrating electronic and electrical instruments.
National and international calibration standards ISO 17025 and the ability to apply these standards to calibration tasks.
Test and measurement instruments multimeters, oscilloscopes, AC/DC power supplies, insulation testers, etc.
Fault finding in both analogue and digital electronics, interpreting electronic circuit schematics and performing component-level repairs.
Calibration and Documentation detailed reporting using calibration certificates and validation documents.
Calibration software and Microsoft Office tools Excel and Word for reports.
Electrical and electronic components, with the ability to repair faulty instruments to the highest standards.
Driving License: A valid UK driving license to facilitate on-site visits and transportation of equipment.
Responsibilities
Repair power electronic equipment to component level.
Calibrate AC to DC Power Equipment, Battery Test Equipment, and other related instruments to ensure their accuracy and reliability.
Travel to customer sites about 2 weeks per month for calibrations and on site support. ....Read more...
Type: Permanent Location: Petersfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £47000 Per Annum None
Posted: 2026-01-02 13:23:03
-
Document Controller required to join an existing team maintaining accurate electronic product and parts data, ensuring compliance with regulatory standards and supporting various teams within the company.
Skills
Electronics manufacturing experience in a similar role.
Organised skills with attention to detail.
Microsoft Office and computer system fluency.
Role
Load new parts and maintain Bills of Materials on EFACS, ensuring compliance with MSL, ECCN, and Harmonised codes.
Coordinate with engineering and production teams to maintain accurate records and resolve related queries.
Assist in the setup of consumable items, Health and Safety documentation, and stock management.
Raise, manage, and track Engineering Change Notes and concessions, providing regular reports on updates.
Perform BOM checks and ensure alignment between customer BOMs and internal systems.
Support the first off production process and assist with queries related to the production line. ....Read more...
Type: Permanent Location: Cardiff, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £40000 Per Annum None
Posted: 2026-01-02 11:09:48
-
Electronics Test Engineer
Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham.
Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply! ....Read more...
Type: Permanent Location: Rusper,England
Start: 02/01/2026
Salary / Rate: £35000 - £40000 per annum
Posted: 2026-01-02 10:58:10
-
Electronics Engineer required to join a team developing advanced instrumentation, sensing and metrology solutions including the design and development of analysis and control systems in analogue and digital electronics focusing on embedded electronics, with FPGA and MCU components.
Requirements
Electronic design experience of PCB schematic capture, layout, manufacture, and testing.
High performance up to 1 MHz, precision analogue circuit design experience.
Design for CE compliance, EMC testing, and product safety knowledge.
Version control systems Git.
FPGA development, Verilog programming, and Xilinx experience.
Microcontroller programming.
PCB design in KiCAD v5 onwards.
1st class or 2:1 degree in Electronics Engineering, Electrical Engineering, or Physics.
The ideal candidate will have a strong technical background in electronics, a passion for instrumentation development.
Role
Specification and design of PCBs.
Maintenance of version-controlled design data and management of PCB fabrication through external suppliers.
PCB verification and validation.
Design, specification, and documentation of cables and wiring used in products and systems.
Conducting regulatory EMC compliance testing. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £63000 Per Annum None
Posted: 2026-01-01 15:54:21
-
Senior Electronics Engineer required to join a growing team designing and developing motion systems and control algorithms for motor, valve and other mechatronic applications.
Requirements
Extensive experience in electronics development for industrial applications.
PCB design, power electronics, EMI or EMC testing, and simulation.
Linear, SMPS, signal conditioning, and driver circuit design.
PSpice and LTspice.
Hardware architecture design, microcontroller-based designs, and testing for compliance.
Degree and ideally Masters in Electronics, Mechatronics, Embedded Electronics or similar subject.
Full hardware development life cycle, including verification and validation.
Wireless communication protocols and high speed PCB design knowledge.
Responsibilities
Design and develop innovative, cost-effective electronics and controls for proportional valves.
Develop designs, specifications, and recommendations for new and existing product electronics control boards.
Technical peer reviews and provide solutions to complex development and field issues.
Oversee testing and validation, ensuring products meet required certifications. ....Read more...
Type: Permanent Location: Waterlooville, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £70000 Per Annum None
Posted: 2026-01-01 11:41:50
-
Holt Executive is pleased to be supporting a critical Business Development Director hire for a global leader in the Electronics Manufacturing Services (EMS) sector.
With over 1,000 employees and manufacturing facilities across the USA, Canada, China, Vietnam, and Mexico, our client delivers an innovative portfolio of EMS, Rapid Prototyping (ARP), NPI, and supply chain solutions.
We are seeking an entrepreneurial sales professional to drive growth and expand the companys presence across the United Kingdom.
This role will focus on acquiring new logos (OEM's) customers and deepening relationships with existing accounts, covering EMS, printed circuit board assemblies (PCBA), and electro-mechanical products.
Key Responsibilities for the Business Development Director, EMS (UK):
- Identify and develop new customer opportunities across the UK in key OEM markets such as industrial, medical, IoT, energy, and communications.
- Map regional EMS market potential, focusing on medium-to-large OEMs with outsourcing needs.
- Lead customers through the full sales process, ensuring engagement and satisfaction.
- Build long-term relationships with decision-makers in supply chain, engineering, and executive leadership.
- Develop and deliver proposals, quotations, and presentations showcasing technical capabilities and value.
- Manage or collaborate with regional sales representatives to extend market coverage.
- Coordinate new program development, including quoting, NPI, and qualification activities.
- Maintain regular contact with customer teams to understand needs, resolve issues, and identify opportunities.
- Analyze territory potential, pipeline performance, and profitability.
- Prepare forecasts, budgets, and performance reports.
- Represent the company at trade shows, industry events, and networking functions.
Key experience needed for the Business Development Director, EMS (UK):
- Bachelors degree in Engineering, Business, or related field.
- 510 years experience in business development or sales in EMS or OEM electronics.
- Strong understanding of electronics manufacturing processes and outsourcing models.
- Proven track record of identifying, developing, and closing complex B2B solutions.
- Entrepreneurial and self-directed, capable of building a regional footprint.
- Excellent communication and presentation skills, able to influence executives.
- Proficient in Microsoft Office, CRM systems, and sales tools.
- Willingness to travel across the UK and occasionally internationally. ....Read more...
Type: Permanent Location: Remote work,England
Start: 30/12/2025
Salary / Rate: Competitive
Posted: 2025-12-30 09:05:04
-
Junior or Graduate level Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control (relays, triacs, stepper motors, etc.) and user interfaces.
Technical Skills
8, 16 or 32 bit microcontrollers
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C
EMC compliance
Interaction of electro-mechanical products/mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £38000 Per Annum None
Posted: 2025-12-29 11:07:53
-
Embedded Digital Electronics Design Engineer required to design military aerospace technology products.
You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence.
....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-12-29 11:00:26
-
Development Manager required to build and manage a Research and Development team.
You will oversee product life-cycle management from initial concept, through product development and upgrade including maintenance oversight.
A background in automotive software and electronics development would be ideal.
Experience
Electronics and software development.
People management and experience managing commercial software projects, Scrum, Jira, etc.
Computer Vision, Image Processing, Radar or Ultrasonics, Laser.
Developing and releasing production code for embedded systems in C and C++.
Electronics and embedded systems, Microprocessors, DSP processing, testing and simulation in Python.
Bachelor of engineering Software or Electronics or similar qualifications and experience
Technologies
Software Engineering, systems, development tools, software and hardware interfaces.
Sensor Technologies based on image, radar, ultrasonics and data processing algorithms.
Analog and digital circuit design including microprocessors, DSP and communication protocols.
Digital communication protocols I2C, SPI, RS232, RS485, CAN, Ethernet etc.
Responsibilities
Lead Team, day to day, line management, technical direction and review.
Manage engineering resourcing plans.
Manage Research, Development and Verification activities.
Own product roadmap.
Manage engineering process improvement ....Read more...
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £56000 - £90000 Per Annum None
Posted: 2025-12-29 10:59:20
-
Senior Electronics Design Engineer to work as part of a product research and development team responsible for electronic design from concept to production and release of world beating optical instrumentation systems to be used in green tech, microelectronics, scientific research, life sciences and medicine.
Experience required
Designing electronic circuits and assemblies from concept to production.
Debugging, simulation and validation of electronics and system designs.
Testing and reporting results into the Development team.
Microcontroller, mixed digital and analogue electronic circuit design.
Schematics Capture and PCB Design Tools.
Prototyping: soldering with SMT components
Debugging and validation of electronics and system designs.
STM32F series ARM core processors.
Automated test equipment development to support production and manufacturing.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £43000 - £65000 Per Annum None
Posted: 2025-12-29 10:53:56
-
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-12-29 10:51:46
-
Firmware Developer required to join a dedicated firmware Research and Development team across the development life cycle for high value, complex wireless controlled rugged robots with advanced and diverse instrumentation.
Skills
Embedded C
Microcontroller programming 8 and 16 bit
Electronics Digital and Analogue
What you will be doing
Battery management and low power system design including motor drivers.
Safe failure mode by design, devices run at significant mechanical strain and harsh environments, including extreme temperatures causing unpredictable failures.
If a tool fails it is essential that the failure is isolated and does not affect any other systems.
Designing and developing elegant solutions for real world problems using innovative design keeping the product suite best in class. ....Read more...
Type: Permanent Location: Dyce, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £33000 - £55000 Per Annum None
Posted: 2025-12-29 10:49:39
-
Hardware Design Engineer required to work on high performance, real time video electronic devices.
You will be joining an Electronics Design team and cover board level architecture, design, implementation and test of digital and or analogue hardware for video processing and interfacing products.
The design work will include component selection, schematic development, PCB layout, board bring-up
Essential Skills
Electronic hardware design experience.
High speed digital design: DDR3/4, PCIe, Serdes etc.
Embedded product development.
Microcontrollers, memory and peripheral interfacing (FLASH, I2C, SPI, RS232, USB)
VHDL for CPLD/FPGA???s.
Analogue electronics.
Role responsibilities
Develop digital products and their associated designs.
Produce clear and concise design documentation of hardware designs. ....Read more...
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £62000 Per Annum None
Posted: 2025-12-29 09:55:57
-
Join a dynamic RF and Hardware team working across the full lifecycle of advanced datalinks and RF systems for defence and aerospace.
This permanent role involves both new product development and sustaining existing products.
Responsibilities
Lead RF design, system architecture, simulation, schematic capture, and PCB layout (Altium)
Scope new technologies and manage external design resources
Support manufacturing, test and troubleshoot hardware issues
Conduct design reviews, verify specs, and mentor junior engineers
Collaborate across engineering disciplines and contribute to design documentation
Skills
Five years in RF design
Experience with wideband RF amplifiers
Proficiency in PCB design tools and RF simulation software
Solid understanding of EMC, analog and digital electronics, and RF test equipment
Strong team player with a proactive attitude
Experience with Altium, AWR Microwave Office, or Ansys HFSS
Familiarity with military or airborne applications and standards
Knowledge of SMPS, embedded systems, and DFM or DFT
Perks and Benefits
Annual bonus (3???6 percent)
25 days holiday ( buy up to 5 more)
Flexible hybrid work (3 office and 2 WFH)
40 hour week ....Read more...
Type: Permanent Location: Brackley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £70000 Per Annum None
Posted: 2025-12-27 10:48:35
-
Are you a Software professional with a background in DSP and have exposure to developing 5G applications?
If so I'd like to speak with you!
A well-established R&D organisation who are also a market leader, are looking to rapidly expand their engineering team and as such are seeking an Embedded Software Engineer to join their development team near Leicestershire.
As an Embedded Software Engineer you will have a background in Digital Signal Processing and a working knowledge of communications systems engineering.
To successful candidate for the Embedded Software Engineer job will have a mixture of embedded/bare metal experience alongside an understanding of implementing communication signal processing algorithms such as DDCs, filters, FFTs.
Skills/Experience required for the Embedded Software Engineer job include:
- BEng/BSc or MSc/Meng within Engineering (Ideally Electronics, Telecommunication or similar)
- Experience in DSP Algorithm simulation and 5G development
- Experience in Bare Metal/ Embedded C
- Experience with RF a bonus
Experience of the following would be advantageous:
- Cross compilers (C++ ARM cross-compiler GCC Version 4.3.3)
- FreeRTOS experience
- Experience with typical embedded control peripherals (i.E.
RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI)
- Cortex M3/M4 Microcontrollers or similar.
- Experience of efficient implementation of communications DSP algorithms (such as FFT, filtering DDC etc.) In VHDL
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D.
This is a great chance for a Embedded Software Engineer to join a consistently growing technology company offering great training and career progression opportunities.
To apply for the Embedded Software Engineer job please send your CV to Ricky Wilcocks, rwilcocks@redlinegroup.Com or phone 01582 87 8810 or alternatively 079317 88834. ....Read more...
Type: Permanent Location: Leicestershire, England
Start: ASAP
Salary / Rate: £40000 - £65000 per annum
Posted: 2025-12-26 00:00:14
-
Embedded device developer required to write firmware in C, use Python extensively for testing and higher-level functionality, configure and administer embedded Linux for device and OS management.
Key skills
Linux system administration for embedded devices
Very strong capability in Python programming
Writing testable.
thread safe applications
Strong capability in C for embedded devices
Configuring peripherals and using interrupts on small microcontrollers
Unit testing principles and practical experience applying them to embedded devices
Excellent understanding of binary data formats, structs and packing data for optimum efficiency
Computer Science or Electronics degree, 2:1 and above
Experience configuring and using modems
Experience working with CAN
Experience configuring Torizon or Yocto Linux
Working in an Agile software team and using Jira
Working with applications that process IMEA strings
Working with inertial data
Hardware debugging
Responsibilities
Maintain and extend the Python application running on our devices
Write modules to support new sensors
Manage the versioning and updates of our application and Yocto Linux based device
Edit the device-tree to configure devices and add new hardware support
Deploy updates to our devices in the field and ensure they are working correctly
Write firmware for microcontrollers in new sensor designs
Implement a unit testing framework in Python and write tests ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £60000 Per Annum None
Posted: 2025-12-24 10:43:16
-
An Electronics Test Engineer is sought to join an innovative engineering team in Cambridgeshire, contributing to the development and implementation of test solutions for complex electronic products and PCB assemblies.
The Electronics Test Engineer, Cambridgeshire, will be expected to develop your understanding in the field, learning from senior engineers and peers in technical areas and industry best practices.
This may include reading and interpreting customer test specifications, developing Design for Test (DFT) solutions, and supporting production test processes.
Responsibilities include:
Read and interpret customer test specifications and schematics to understand product requirements.
Develop and implement effective DFT and test plans to ensure high product yield and performance.
Serve as a technical point of contact with customer design and technical teams, discussing test requirements, solutions, product design, and improvements.
Investigate and research new testing methods, tools, and procedures to improve test coverage, fault diagnosis, and process efficiency.
Support Operations Test team on equipment specification, operation, product testing, and fault analysis.
Analyse defects and failures in collaboration with Quality, Engineering, and Production teams to implement corrective actions and continuous improvements.
Develop and maintain high-quality documentation, including test reports, SOPs, and customer-facing technical communication.
Work independently or as part of a team across multiple projects, ensuring timely delivery of test solutions.
Key skills & experience:
Minimum degree or equivalent academic qualifications; HNC level acceptable with extensive relevant experience.
Experience in electronic PCB/component testing environments with strong knowledge of electronic hardware.
Proficiency with lab software engineering tools such as LabVIEW and Gerber View; exposure to Embedded C, Python, or similar programming languages advantageous.
Strong analytical and problem-solving skills with high attention to detail.
Competent with Microsoft Office applications, particularly Excel, and capable of producing clear technical reports.
Ability to manage own projects with minimal supervision and work across multiple projects in parallel.
Effective communication skills, both verbal and written, with experience liaising with customers.
How to apply:
Apply now for the Electronics Test Engineer role in Cambridgeshire.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Cambridgeshire, England
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2025-12-23 15:49:45
-
Lead Electrical & Electronics Engineer
£40-£45 p/h | Outside IR35 | Initial 3-month contract
An innovative engineering manufacturer is seeking an experienced Lead Electrical & Electronics Engineer to support their product design team on a contract basis.
You'll take a technical lead role across electrical and electronic design for complex educational and industrial technology products used worldwide.
In this hands-on position, you'll guide a small electronics team while working across the full product lifecycle — from concept and schematics to PCB/PCBA work, component selection, integration of motors, pumps, heaters, and embedded systems, as well as fault-finding down to component level.
Experience with PLCs, HMIs, microcontrollers, and electrical systems up to ~10kW is highly valuable.
What you'll be doing:
Leading electrical & electronic design for new and legacy products
Diagnosing and improving PCBAs at component level
Creating electrical schematics and integrating mechanical/electromechanical systems
Selecting components and suppliers, balancing cost, performance & reliability
Supporting product compliance, documentation, testing and design reviews
Collaborating closely with engineering, projects, and manufacturing teams
What you'll need:
Strong background in electrical/electronic engineering (degree-qualified)
Proficiency with ECAD tools (SolidWorks Electrical, ePlan, PCB design software)
Solid understanding of product safety directives (Machinery, LVD)
Project leadership experience and ability to manage multiple design workflows
A methodical, detail-driven engineering mindset
This is a great opportunity to step into a highly varied, technically rich role within a small, collaborative team working on globally-used products.
Immediate start available — apply now to discuss the contract in detail. ....Read more...
Type: Contract Location: Hampshire, England
Start: ASAP
Salary / Rate: £40 - £45 per hour
Posted: 2025-12-23 10:07:02
-
An exciting opportunity has arisen for an Electronics Engineer based in Worcestershire, to join a bespoke electronic design and manufacturing services company.
This is a key position offering variety, technical challenge, and long-term career progression in a growing company.
The ideal Engineer should have a good knowledge of circuit design, both analogue and digital, at a schematic and board level, as well as a good working knowledge of C.
Ideally, you would also be at home using 3D packages to design injection moulded plastic or folded metal enclosures.
Ideal skills/experience of the Electronics Engineer based in Worcestershire
Good knowledge of C programming language
Knowledge of embedded systems and their benefits and limitations
Knowledge of both digital and analogue electronics
Experience laying out circuit boards
Experience with Microchip devices and their IDE (MPLAB X)
Experience with Eagle
Experience with Fusion 360
Experience with CAN and other similar communications protocols
Exposure to prototyping hardware such as 3d printers and laser cutters
The successful candidate must be an adaptable, enthusiastic individual with extensive experience working for a similar kind of electronics company; however, those with some experience that show the right aptitude and interest will also be considered.
To apply for this Electronics Engineer based in Worcestershire role, please send your CV to:
Adighton@redlinegroup.Com or call 01582878821 or 07961158768 ....Read more...
Type: Permanent Location: Worcestershire, England
Start: ASAP
Salary / Rate: £30000 - £50000 per annum
Posted: 2025-12-23 09:59:53
-
RF Engineer - Senior
Location: Bradford, West Yorkshire (Hybrid)
An exciting opportunity has arisen for a Senior RF Engineer to join a specialist UK electronics company working on advanced RF and microwave systems.
The company designs, develops, and delivers high-performance RF solutions across multiple industries, including defence, aerospace, and communications.
This role is ideal for a technically skilled engineer with hands-on experience in RF design, testing, and integration who thrives in a collaborative, high-precision engineering environment.
Main Responsibilities of the RF Engineer - Senior (based in Bradford):
Design, analyse, and optimise RF circuits and subsystems across microwave frequency bands (1GHz-18GHz).
Develop and implement low-noise amplifiers (LNAs), power amplifiers (PAs), mixers, filters, oscillators, and synthesizers.
Conduct RF system architecture and front-end design, balancing performance, cost, power, and size.
Execute RF simulation, modelling, and statistical analysis using industry-standard tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Perform RF testing and validation using spectrum analysers, VNAs, signal generators, power meters, and noise figure analysers
Troubleshoot RF issues at component, PCB, and system level and correlate lab measurements with simulations.
Collaborate with PCB layout engineers to ensure controlled impedance, grounding, shielding, and overall RF performance.
Support EMC, EMI, and regulatory compliance testing and certification activities.
Mentor junior RF engineers and contribute to technical design reviews, reports, and customer documentation.
Requirements of the RF Engineer - Senior (based in Bradford):
Proven experience in RF design, 1GHz-18GHz frequency range, with LNAs, PAs, mixers, filters, oscillators, and synthesizers.
Strong understanding of RF system design, linearity, noise figure, intermodulation, and spectral purity.
Hands-on experience with RF test equipment and measurement techniques.
RF PCB layout knowledge and experience integrating RF designs into larger mixed-signal or digital systems.
Proficiency with RF CAD/simulation tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Experience with scripting/programming for RF analysis or test automation (Python, MATLAB, LabVIEW).
Excellent problem-solving skills, attention to detail, and ability to communicate complex RF concepts clearly.
Experience in mentoring or leading RF work packages preferred.
Understanding of product development lifecycle, cost, risk, and schedule management.
Ability to work independently as well as collaboratively across multidisciplinary teams.
To apply for this RF Engineer - Senior role based in Bradford, please send your CV to: nking@redlinegroup.Com or call 01582 878 839 ....Read more...
Type: Permanent Location: Bradford, England
Start: ASAP
Salary / Rate: £55000 - £70000 per annum
Posted: 2025-12-22 14:45:29
-
A Process Engineer is sought to join an innovative engineering team in Norfolk, contributing to the development, optimisation, and validation of manufacturing processes for high-reliability electronic and microelectronic assemblies used in commercial, aerospace, and defence applications.
The Process Engineer, Norfolk, will be expected to develop a strong understanding of production engineering within regulated environments, learning from peers and senior engineers in technical areas and industry best practices.
This will include microelectronic package assembly, electronics test and assembly processes, design for manufacturability, and scalable production methods.
Responsibilities include:
Work with cross-functional engineering, quality, and operations teams to define and implement robust manufacturing and process strategies aligned with customer and regulatory requirements.
Lead process development and optimisation activities for microelectronic assembly and electronics manufacturing, ensuring quality, cost, and delivery targets are met.
Act as the nominated engineer for assigned programmes, providing technical ownership and engineering oversight.
Support new product introduction activities through DFM reviews, process validation, and production readiness.
Develop and maintain comprehensive process documentation including work instructions, control plans, FMEAs, and capability studies.
Investigate production issues using structured root cause analysis techniques and drive corrective and preventive actions.
Monitor equipment performance, supporting preventative maintenance and continuous improvement initiatives.
Ensure compliance with IPC standards and relevant aerospace and defence quality regulations.
Provide technical support during audits, customer visits, and internal reviews.
Key skills & experience:
Degree in Mechanical, Electrical, Manufacturing Engineering, or a related discipline, or equivalent industry experience.
Proven experience in a production or process engineering role within aerospace, defence, semiconductor, or microelectronics environments.
Strong understanding of electronics manufacturing and microelectronic assembly processes.
Familiarity with IPC standards and quality systems in regulated industries.
Experience with continuous improvement methodologies such as Lean and Six Sigma.
Strong analytical, problem-solving, and project management skills.
Effective communication skills and the ability to collaborate across multidisciplinary teams.
Eligibility for UK SC clearance or the ability to obtain it.
How to apply:
Apply now for the Process Engineer role in Norfolk.
Send your CV to adighton@redlinegroup.Com
Or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £45000 - £48000 per annum
Posted: 2025-12-17 15:52:38
-
Are you a Software professional with a background in DSP and have exposure to developing 5G applications?
If so I'd like to speak with you!
A well-established R&D organisation who are also a market leader, are looking to rapidly expand their engineering team and as such are seeking an Embedded Software Engineer to join their development team near Leicestershire.
As an Embedded Software Engineer you will have a background in Digital Signal Processing and a working knowledge of communications systems engineering.
To successful candidate for the Embedded Software Engineer job will have a mixture of embedded/bare metal experience alongside an understanding of implementing communication signal processing algorithms such as DDCs, filters, FFTs.
Skills/Experience required for the Embedded Software Engineer job include:
- BEng/BSc or MSc/Meng within Engineering (Ideally Electronics, Telecommunication or similar)
- Experience in DSP Algorithm simulation and 5G development
- Experience in Bare Metal/ Embedded C
- Experience with progamming through Linux
Experience of the following would be advantageous:
- Experience with Yocto-based Board Support Packages
- Cross compilers (C++ ARM cross-compiler GCC Version 4.3.3)
- FreeRTOS experience
- Experience with typical embedded control peripherals (i.E.
RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI)
- Cortex M3/M4 Microcontrollers or similar.
- Experience of efficient implementation of communications DSP algorithms (such as FFT, filtering DDC etc.) In VHDL
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D.
This is a great chance for a Embedded Software Engineer to join a consistently growing technology company offering great training and career progression opportunities.
To apply for the Embedded Software Engineer job please send your CV to Kyle Graveney at @KGraveney@redlinegroup.Com ....Read more...
Type: Permanent Location: Leicestershire, England
Start: ASAP
Salary / Rate: £40000 - £65000 per annum
Posted: 2025-12-17 09:48:27
-
Mechanical and Electrical Manufacturing Technician required to join a growing production team, supporting the build of equipment used in cutting edge marine and subsea applications.
This is a hands on role ideal for someone with strong electronics assembly and wiring experience.
Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines.
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £42000 Per Annum None
Posted: 2025-12-17 09:34:23
