-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technology.
Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems ....Read more...
Type: Permanent Location: Northampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £38000 Per Annum None
Posted: 2026-01-04 11:39:05
-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Type: Permanent Location: Northampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-01-04 11:34:03
-
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Type: Permanent Location: Edenbridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £52000 Per Annum None
Posted: 2026-01-04 11:27:57
-
We are seeking a hands-on Operations Coordinator to manage and support external vehicle conversion partners delivering specialist build work for our business.
Acting as the central link between internal teams and third-party contractors, you will ensure vehicles are converted to specification, on schedule, and to the highest quality standards.
This is not a purely desk-based role.
You will use your practical knowledge of vehicle conversion, coachbuilding, or specialist vehicle manufacturing to challenge processes, support build teams on-site, and resolve issues quickly and effectively.
Key Responsibilities of the Operations Coordinator -
Third-Party Converter Management
Serve as the primary contact for external vehicle conversion partners
Support, train, and onboard converters to deliver new and existing vehicle build types
Ensure converters operate within their technical capability and production capacity
Identify, escalate, and resolve issues affecting quality, cost, or delivery timelines
Build Support & Technical Coordination
Ensure converters work from the latest build documentation, including drawings, specifications, bills of materials, and visual references
Provide technical support during builds and act as the go-to contact during and after conversions
Coordinate prototype and new build training, including on-site sessions when required
Quality Control & Compliance
Monitor build quality at third-party sites through regular checks and inspections
Coordinate formal quality reviews and follow-up visits where issues arise
Record and report vehicle damage or defects, ensuring corrective actions are implemented
Planning, Scheduling & Logistics
Work closely with internal production and scheduling teams to forecast workloads and allocate vehicles appropriately
Monitor build progress and maintain visibility of converter capacity
Coordinate supply, collection, and return of parts and consumables to support uninterrupted builds
Oversee stock control for free-issue or consignment parts held at converter sites
General Responsibilities -
Attend operational, technical, and planning meetings
Maintain accurate records and system updates relating to parts, builds, and supplier activity
Support continuous improvement across third-party conversion processes
Undertake additional reasonable duties in line with the role
What we are looking for in an Operations Coordinator -
Proven hands-on experience in vehicle conversion, coachbuilding, specialist vehicle builds, or a closely related automotive environment
Strong understanding of production processes, quality standards, and technical drawings
Confident communicator with the ability to build effective working relationships with external contractors
Highly organised, able to manage multiple builds and priorities simultaneously
Comfortable working independently while collaborating across internal departments
Strong IT skills, including Excel and standard office systems (ERP experience advantageous)
Full driving licence and willingness to travel regularly to external sites, including occasional overnight stays
Desirable
The operations coordinator will come from a background in mechanical, electrical, or engineering disciplines
Familiarity with CAD or technical drawing systems
Experience working in fast-paced, build-to-order, or project-based environments
Location: High Wycombe (office-based with occasional travel) Salary: Circa £40k (dependant on experience) Hours: 40 hours per week, Monday to Friday (8:00am - 5:00pm) Holidays: 25 days + bank holidays
For more information about the Operations Coordinator role, please contact Sophie Ranson at E3 Recruitment or hit ‘Apply' now! ....Read more...
Type: Permanent Location: High Wycombe, England
Start: ASAP
Salary / Rate: £30000.00 - £45000.00 per annum
Posted: 2026-01-04 10:00:18
-
JOB DESCRIPTION
Director, Engineering oversees the development and implementation of the manufacturing processes to maintain production capability, capacity to support corporate business objectives, capital plan and continuous improvement program.
Ensures the engineering team works cohesively across all departments.
Job Responsibilities
Planning and Coordinating Capital Plan
Plan, coordinate and develop the short- and long-range capital plan for the operations group.
Assure plan addresses the priorities in safety, quality capacity, innovation, cost improvement, property risk and physical plant.
Best Practices
Support MS 168 and Tier Management process to assure robust continuous improvement process.
Assure identification of best practices and equipment are utilized across all plants.
Coordinate plant engineering assets to best utilize talents.
Capacity Planning
Develop and maintain a capacity utilization and growth plan to assure manufacturing capabilities support corporate growth and innovation.
Assure assets are utilized and balanced across all facilities.
Work with plant engineering to develop, justify and implement plans.
Communication
Establish strong lines of communication with the Plant Managers.
Form open communication channels with all associates and subordinates.
Be approachable to all.
Be professional in all interactions.
Work effectively and relate well with others.
Team Building
Support the hire, training, and development of engineering.
Support plant problem solving and troubleshooting when necessary.
Continuous Improvement
Establish and monitor key metrics in all functional areas.
Analyze data, identify trends, recommend improvements in the key metrics of OEE, ZBY and Quality.
Initiate and Coordinate Major Projects
E.G.
- Plant Layout changes, installation of capital equipment, major repairs, etc.
Perform miscellaneous duties and projects as assigned and required to support business objectives
Requirements
Bachelor's or master's degree in engineering.
10+ years of experience in engineering or related technical fields.
Strong leadership and people management skills, with the ability to inspire, motivate, and guide engineering teams to success.
Excellent leadership, communication, and analytical skills.
AutoCAD, Microsoft Office software, spreadsheets, and financial management skills;
Strong strategic thinking and problem-solving skills, with the ability to translate business needs into engineering solutions.
Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines in a fast-paced environment.
Ability to hit timelines.
Proven ability to drive innovation and process improvement within engineering teams.
Ability to travel up to 50%
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$155,000 to $195,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-04 06:09:11
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following: Understand and manage the capacity milling operation and assist supervising the management of the process performance. Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Work with production to start up, enhance and improve all processes related to production and assist with defining SOPs. Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Schedule: Monday - Friday Salary: $80,000 - $115,000Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-01-04 06:08:48
-
JOB DESCRIPTION
Director, Engineering oversees the development and implementation of the manufacturing processes to maintain production capability, capacity to support corporate business objectives, capital plan and continuous improvement program.
Ensures the engineering team works cohesively across all departments.
Job Responsibilities
Planning and Coordinating Capital Plan
Plan, coordinate and develop the short- and long-range capital plan for the operations group.
Assure plan addresses the priorities in safety, quality capacity, innovation, cost improvement, property risk and physical plant.
Best Practices
Support MS 168 and Tier Management process to assure robust continuous improvement process.
Assure identification of best practices and equipment are utilized across all plants.
Coordinate plant engineering assets to best utilize talents.
Capacity Planning
Develop and maintain a capacity utilization and growth plan to assure manufacturing capabilities support corporate growth and innovation.
Assure assets are utilized and balanced across all facilities.
Work with plant engineering to develop, justify and implement plans.
Communication
Establish strong lines of communication with the Plant Managers.
Form open communication channels with all associates and subordinates.
Be approachable to all.
Be professional in all interactions.
Work effectively and relate well with others.
Team Building
Support the hire, training, and development of engineering.
Support plant problem solving and troubleshooting when necessary.
Continuous Improvement
Establish and monitor key metrics in all functional areas.
Analyze data, identify trends, recommend improvements in the key metrics of OEE, ZBY and Quality.
Initiate and Coordinate Major Projects
E.G.
- Plant Layout changes, installation of capital equipment, major repairs, etc.
Perform miscellaneous duties and projects as assigned and required to support business objectives
Requirements
Bachelor's or master's degree in engineering.
10+ years of experience in engineering or related technical fields.
Strong leadership and people management skills, with the ability to inspire, motivate, and guide engineering teams to success.
Excellent leadership, communication, and analytical skills.
AutoCAD, Microsoft Office software, spreadsheets, and financial management skills;
Strong strategic thinking and problem-solving skills, with the ability to translate business needs into engineering solutions.
Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines in a fast-paced environment.
Ability to hit timelines.
Proven ability to drive innovation and process improvement within engineering teams.
Ability to travel up to 50%
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$155,000 to $195,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-04 06:08:30
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following: Understand and manage the capacity milling operation and assist supervising the management of the process performance. Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Work with production to start up, enhance and improve all processes related to production and assist with defining SOPs. Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Schedule: Monday - Friday Salary: $80,000 - $115,000Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-01-04 06:08:30
-
Automotive Engineering organisation require an Motor Vehicle Diagnostic Engineer to join a mechanical testing team that focuses on engine overhaul, vehicle testing, electrical diagnostics, electric vehicle wiring and system testing.
This role will expose you to customisable testing systems, vehicle regulation approval and certification and motorsport performance enhancement.
Skills
Automotive Engineering experience of mechanical testing.
Engine or full vehicle diagnostics electrical and mechanical instrumentation test equipment.
Dynamometer, thermocouple or transducer calibration.
Data capture, analysis and reporting
Degree or HND in Automotive or Mechanical Engineering.
Role
Full vehicle performance, safety and functional testing.
Set up and complete automated engine testing.
Identify data discrepancies early in the process, trouble shoot and re build.
Interpret and deliver conclusions from the data. ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £52000 Per Annum None
Posted: 2026-01-03 18:13:31
-
JOB DESCRIPTION
We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization.
If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for.
You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies.
You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills.
Technology Knowledge:
Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc.
Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings.
Strong command on analytical methods and structure-property relationship
Expert understanding of manufacturing process and product development
Technical Leadership:
Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation
Demonstrated skillset and track record in creating an environment to scout new ideas and innovation.
Continuous learning and intimate awareness of open literature and competitive landscape
Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress.
Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership
Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community.
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc.
Energetic, Driving and Inspiring
Action oriented, perseverance and results driven
Demonstrates Courage
Leadership (technical & managerial) command skills, conflict management
Continuous learning/growth and mentorship and teaching skills
Organization Leadership:
Ability to lead and interact with cross-functional teams in a matrixed organization
Agility to respond emerging business needs - strong change of management skills
Managing high stakes and challenging situation with all levels of organizations
Using, assessing the organizational processes and developing new processes to improve efficiency and quality
Demonstrate strong career ambition - potential to become top leader.
QUALIFICATIONS:
KNOWLEDGE:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes.
At least 4 years of technical supervisory or management experience with a diverse workforce., M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave).
Rust-Oleum offers 10.5 paid holidays and 1 floating holiday per year.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-01-03 14:08:48
-
We are seeking a Machine Learning Engineer with a strong background in machine learning and programming to join our innovative team.
In this role, you will develop and refine cutting-edge machine learning algorithms across diverse projects, including document processing, satellite imagery analysis, and Large Language Models (LLMs).
Qualifications
A PhD or MSc in Computer Science, Artificial Intelligence, Data Science, or a related field.
Key Skills and Experience
Expertise in machine learning and statistics, with practical experience in computer vision (CV) or natural language processing (NLP).
Familiarity with large language models (LLMs) is a bonus.
Strong proficiency in object oriented programming, particularly with Python.
Hands-on experience with PyTorch or other machine learning frameworks
....Read more...
Type: Permanent Location: Crawley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £75000 Per Annum None
Posted: 2026-01-03 13:56:00
-
A LabVIEW developer required to design, develop and maintain LabVIEW code as part of a condition monitoring and automated testing systems engineering team.
You will create reliable and maintainable code for instrument sensing, optical signal processing, signal capture and measurement, pressure measurement, temperature, high temperature, pressure, harsh environments, space, cryogenic and extreme pressure.
The ideal candidate will be a certified LabVIEW Developer, already on that path or keen to begin.
Experience
LabVIEW development for application in aerospace, automotive, electronic, test, measurement or similar domains.
Role
LabVIEW development using engineering concepts to create rugged test, measurement and condition monitoring devices integrating electronics, sensor signals, communication, instrumentation, embedded firmware and systems. ....Read more...
Type: Permanent Location: Wantage, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £50000 Per Annum None
Posted: 2026-01-03 10:24:53
-
JOB DESCRIPTION
We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization.
If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for.
You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies.
You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills.
Technology Knowledge:
Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc.
Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings.
Strong command on analytical methods and structure-property relationship
Expert understanding of manufacturing process and product development
Technical Leadership:
Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation
Demonstrated skillset and track record in creating an environment to scout new ideas and innovation.
Continuous learning and intimate awareness of open literature and competitive landscape
Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress.
Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership
Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community.
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc.
Energetic, Driving and Inspiring
Action oriented, perseverance and results driven
Demonstrates Courage
Leadership (technical & managerial) command skills, conflict management
Continuous learning/growth and mentorship and teaching skills
Organization Leadership:
Ability to lead and interact with cross-functional teams in a matrixed organization
Agility to respond emerging business needs - strong change of management skills
Managing high stakes and challenging situation with all levels of organizations
Using, assessing the organizational processes and developing new processes to improve efficiency and quality
Demonstrate strong career ambition - potential to become top leader.
QUALIFICATIONS:
KNOWLEDGE:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes.
At least 4 years of technical supervisory or management experience with a diverse workforce., M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave).
Rust-Oleum offers 10.5 paid holidays and 1 floating holiday per year.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-01-03 06:08:17
-
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team.
As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master's or Bachelor's degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude.
Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc100000 - Swiss Franc130000 per annum
Posted: 2026-01-03 01:05:42
-
Job Title: CNC Turner
Location: New Milton
Employment Type: Full-Time, Permanent
A long-established precision engineering manufacturer is seeking a skilled CNC Turner with programming experience to join their machining team.
The company produces a wide variety of components for highly regulated sectors and maintains strong quality standards.
Role Overview You will program, set, and operate CNC lathes with Fanuc controls, producing high-accuracy components in materials such as aluminium and stainless steel.
Work varies from one-offs to batch production.
Key Requirements
- Strong electrical/mechanical knowledge of CNC machine tools.
- Essential experience with Fanuc OI-TC / I-Series controls.
- Confident machining aluminium, stainless steel and other materials.
- Manual turning experience.
- Ability to read and interpret engineering drawings and tolerances.
- Skilled in using precision measuring equipment.
- Accurate completion of documentation within ISO9001 & AS9100 standards.
- Flexible, self-motivated and committed to continuous improvement.
Additional Details
- Mixed production volumes from prototypes to batch work.
- Materials include mainly light-gauge aluminium and stainless steel.
- Applicants must have the right to work in the UK.
Working Hours
- MondayThursday: 07:4516:15
- Friday: 07:4512:45
- Salary: Dependent on experience
About the Employer The company specialises in precision machining, welding, fabrication, heat treatment, brazing and nondestructive testing for aerospace, nuclear and other high-specification industries.
They hold a wide range of quality and special process accreditations and continue to expand their capability and compliance.
How to Apply Apply directly through Indeed or contact Rio at Holt Engineering on 07483 025038 for further details. ....Read more...
Type: Permanent Location: New Milton,England
Start: 02/01/2026
Salary / Rate: £17 - £21 per hour
Posted: 2026-01-02 20:21:04
-
CNC Miller Setter Day Shift
Location: Dorset
Contract: Permanent, Full-Time
Overview
A long-established precision engineering firm is seeking an experienced CNC Miller Setter to support the production of complex, tight-tolerance components for high-specification industries.
Role Purpose
Set and operate CNC milling machines using Fanuc or Mazak controls, ensuring all parts are produced accurately to drawing and specification.
Key Duties
- Set and run CNC milling machinery.
- Interpret drawings, route cards, and inspection criteria.
- Choose suitable tooling and workholding for each job.
- Maintain high accuracy and surface finish standards.
- Perform in-process checks using standard measuring equipment.
- Diagnose and resolve machining or tooling issues.
- Keep the work area clean and compliant with safety requirements.
- Liaise with programming and quality teams as needed.
- Record relevant production and inspection data.
Skills & Experience
- Proven CNC milling experience (Fanuc or Mazak).
- Strong understanding of drawings and GD&T.
- Precision engineering background preferred.
- Confident with measuring tools and self-inspection.
- Methodical, reliable, and able to work independently.
How to Apply
For more details or a confidential chat about the CNC Miller role, call Rio on 07483025038, or apply directly and youll be contacted shortly.
Even if your CV isnt fully updated, please still get in touch. ....Read more...
Type: Permanent Location: Three Legged Cross,England
Start: 02/01/2026
Salary / Rate: £17 - £21 per hour
Posted: 2026-01-02 20:18:07
-
Quality Inspector
Location: Wareham
Salary: £32,000£35,000
Were supporting a well-established engineering business in Wareham thats looking to bring a new Quality Inspector into the team.
This is a great opportunity for someone who enjoys working with precision components and wants to be part of a supportive, skilled engineering environment.
What youll be doing
- Carrying out first-off, roving, and final inspections on a variety of components and assemblies.
- Helping to develop programs and processes for automated measurement equipment.
- Working closely with engineering and production teams to resolve issues and support improvements.
- Recording inspection data, identifying non-conforming parts, and keeping documentation accurate.
- Providing feedback to help the team stay on track and meet targets.
- Supporting general admin, housekeeping, and upholding high quality and H&S standards.
What were looking for
- Experience within an engineering or manufacturing setting.
- Confident reading engineering drawings and understanding technical information.
- Skilled using measurement tools such as micrometers, calipers, indicators, height gauges, etc.
- Understanding of common machining processes like milling and turning.
- Clear communication skills and a collaborative approach.
- Strong attention to detail, organised working style, and confident problem-solving ability.
- Comfortable using Microsoft Word and Excel.
- Good awareness of Health & Safety practices.
It would be a bonus if you also have
- CMM programming experience (MCOSMOS).
- Vision system programming.
- Shaft scanning experience.
- A background in precision engineering inspection.
- Knowledge of assembly methods or gear hobbing.
Interested? If this sounds like a good fit, please send over your CV or get in touch with Rio on 07483 025 038. ....Read more...
Type: Permanent Location: Wareham,England
Start: 02/01/2026
Salary / Rate: £32000 - £35000 per annum
Posted: 2026-01-02 20:16:04
-
Quality Inspector
Weymouth
Quality Inspector Salary £15-17 per hour
Permanent Role
The Company
Join a leading precision engineering company with decades of experience in the aerospace and defence industries.
Specializing in the design, manufacture, and supply of high-quality components, this company produces critical parts for jet engines, aircraft structures, and weapons systems.
Committed to the highest quality standards, they are now seeking a skilled and detail-oriented Quality Inspector to join their team.
Quality Inspector Key Responsibilities
Perform First Offs, In-Process, Goods Inwards, and Final Inspections
Use hand tools for manual inspection and operate an in-house MRP system to document findings
Prepare and carry out FAIRs (First Article Inspection Reports)
Ensure compliance with Quality Assurance systems and support continuous improvement initiatives
Maintain a safe and organized workplace
Quality Inspector Skills & Experience
Experience in FAIR creation and completion to AS9102 standards
Strong ability to read and interpret engineering drawings
Good understanding of GD&T (Geometric Dimensioning & Tolerancing)
Background in Inspection and/or Surface Treatments
Why Apply for the Quality Inspector Role?
Work for a leading Aerospace & Defence precision engineering company
Competitive £15-£17 per hour salary
Join a highly skilled Quality team in a thriving industry
How to Apply for the Quality Inspector Position
Apply for the Quality Inspector role now or contact Rio at rio@holtengineering.co.uk for more information 07483025038. ....Read more...
Type: Permanent Location: Weymouth,England
Start: 02/01/2026
Salary / Rate: £15 - £17 per hour
Posted: 2026-01-02 20:12:04
-
We are searching for an experienced Network Security Engineer to be responsible for ensuring the Group's IT Networks and Communications are well designed, secure, optimal and function consistently across all internal and external operations.
IT and Cyber Security is extremely important and is key to all our client's operations and you will play an extremely vital role in developing and maintaining security services throughout the business.
The role is offered on a hybrid-working basis with up to 2-days per week working from home.
The role requires you in the office at least 3-days per week so you MUST live within a commutable distance of Exeter to be considered for the position or you will be looking to relocate to the area.
The role comes with excellent benefits!
In this role you will be responsible for the following:
Reviewing and managing network security services in line with Group security objectives and policies.
Monitoring and administrating the security of both internal and external corporate network communications, including, routers, switches, firewalls, DMZ, servers, Wi-Fi, OT, telephony and LAN/WAN/VPN communication services.
Constantly reviewing the IP space across the organisation ensuring that the TCP/IP stack, VLANs, IP Subnet, DNS, DHCP, VPNs, and VoIP traffic is well designed, secure and optimised.
You will ensure best practices are used for delivering network security.
Continually monitoring, maintaining and testing the threat landscape and security posture.
Provide regular service status updates to line management and agree and monitor service availability targets.
Manage all SSL and external web server security functions to ensure data protection, systems integrity and user confidence at all times.
Manage NIS2 and GDPR privacy policies and operational practice.
Perform regular reviews of security solutions and processes, identifying opportunities for optimisation to over two hundred office, home and field-based employees.
Provide day-to-day cyber security guidance and support to relevant technical & business stakeholders.
Deliver annual penetration testing and implement recommended improvements.
Research latest network cyber threat developments and recommend any actions that will improve network performance and security.
Work closely with NIBE SOC teams and internal security engineers to ensure all preventative security measures are implemented and Zero Day / critical threats are extinguished in line with internal resolution targets.
Collaborate with other business teams to ensure the proper use of systems.
Coordinate investigations and reporting of security incidents related to Network, Systems and Applications.
Diagnose root causes of system failures and implement appropriate corrective actions.
Assist with OT process and system change management, overseeing testing and approval of changes using an approved methodology.
Ensure all network hardware assets are identifiable and updated in the asset management system.
Provide technical expertise to support the maintenance of our hardware infrastructure systems and services.
Work closely with NIBE IT teams to ensure Group IT policies are continually checked and in place.
Required Experience
A computer related degree or relevant professional certification and accreditation is preferred.
Extensive commercial experience in an IT security role maintaining secure networks in a MS-Windows and Linux environment.
Expert knowledge of and experience in LAN/WAN/VLAN communications, VPN configuration and enterprise wireless networking.
Experience of Dell core and edge switches with fibre is preferable.
CCNA/CCNP equivalent accreditation is advantageous but is not essential.
Experience and excellent working knowledge of GNS3 (or similar) is really beneficial.
Firewall configuration, management and monitoring experience is essential.
Experience of FortiGate products preferable.
TCP/IP networking stack, DNS, DHCP, RADIUS/AAA, Active Directory, SSL, 2FA, OT skills are essential for this position.
Knowledge of information security standards (e.g., ISO 17799/27002/27001/PCI DSS/SIEM, etc.), rules and regulations related to information security and data confidentiality (e.g., FERPA, HIPAA, etc.) and key network security principles for risk identification and analysis.
Knowledge of Linux OS and Windows Server and desktop operating systems configuration & troubleshooting and SCCM/MECM skills are preferrable.
Knowledge of and experience in virtual network technologies, specifically ESXi and VMware configuration and administration is advantageous.
Knowledge of MDM products, CrowdStrike and Cortex XDR configuration and administration would be advantageous.
Experienced user of Office 365, Teams, OneDrive, SharePoint etc.
- any MS E3 subscription services.
Excellent troubleshooting, diagnostic, problem-solving and communication skills.
Flexibility to work on planned, out of hours systems projects if required.
Training is available for the right candidate to ensure complementary skills are acquired.
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position.
No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: Exeter, England
Start: 23/02/2026
Salary / Rate: £38000 - £45000 per annum + Good Holiday, Hybrid, Pension, Insurance
Posted: 2026-01-02 19:40:28
-
We are looking for Microwave Design professional with extensive experience in the design and analysis of microwave and RF circuits and systems across frequencies ranging from UHF to 94 GHz.
Proficient in advanced simulation, design, and testing of complex RF components and systems.
Demonstrates a broad technical knowledge base complemented by practical skills in prototyping, fault-finding.
Responsibilities
Design and optimise filters, couplers, microstrip, waveguide, and antenna systems to meet performance specifications.
Develop and analyse microwave circuits and systems from UHF to 94 GHz.
Develop antenna solutions, including scannable receive arrays, planar microstrip patches, and parabolic reflectors.
Build, test, fault-find, and rework SMT assemblies and other microwave systems.
Create detailed technical documentation for designs, simulations, and testing procedures.
Key skills
Proficient in tools such as HP ADS, AWR Microwave Office, HFSS, CST
Skilled in using a wide range of microwave test equipment.
Proficiency in assembly language, with an awareness of HTML, Perl, and CGI scripting
AC and DC circuits, digital logic, microprocessors, microcontrollers, and DSP systems
RF design, including filters, couplers, microstrip, waveguide, and antenna systems.
Comprehensive knowledge and experience in the design, analysis, and testing of complex microwave systems. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £95000 - £650000 Per Annum None
Posted: 2026-01-02 17:46:50
-
The company specialises in the engineering, manufacture, and application of fire protection systems.
We are seeking a Material Support Engineer to assist the Technical Manager in providing technical support to internal departments such as sales and projects.
This role involves maintaining up to date certification and qualification documentation, liaising with external labs for material evaluations, supporting material testing and preparation processes, solving technical problems, and writing technical reports for clients.
You will also review documentation for compliance with standards and ensure all activities are carried out safely and effectively.
The position requires a balance of technical expertise, administrative efficiency, and hands-on involvement to support the timely delivery of technical projects. ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £42000 Per Annum None
Posted: 2026-01-02 17:43:43
-
ASIC Design and Development Project Manager required to oversee the development of customer ASIC projects across various stages, from specification to tape out.
This role is ideal for someone with hands on experience in ASIC development FE design, verification, mixed signal, or physical implementation who is looking to transition into project management.
Experience
Managing ASIC projects from concept to production release.
Hands on experience in ASIC development FE design, mixed-signal, verification, or physical implementation.
Strong understanding of ASIC and VLSI design flows, with the ability to engage in technical discussions with leads.
Proven people management skills, with experience leading teams and managing customer relationships.
Experience with multi-site, hybrid working environments.
Master???s degree in Electronics Engineering or a related field.
Responsibilities
Lead customer ASIC projects, managing the full project lifecycle from RTL to GDS2, or specific phases such as design, verification, and physical implementation.
Plan, track, and manage schedules, budgets, and risks, ensuring projects are completed on time and within scope.
Maintain regular communication with the engineering team and customers, ensuring any deviations from the original plan are addressed.
Chair key project reviews, ensuring all deliverables meet quality standards and ISO9001:2015 compliance.
Provide leadership and motivation to the project team, ensuring successful project execution.
Support business unit with new opportunities and proposals, and contribute to process improvements. ....Read more...
Type: Permanent Location: Abingdon, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £95000 Per Annum None
Posted: 2026-01-02 17:36:37
-
We are seeking a Verification Engineer with 10+ years of industry experience to join our growing verification team.
You will have the opportunity to work on a variety of challenging and exciting projects, leading the verification process and driving innovative solutions for customers.
Key Responsibilities
Lead and support customer and internal verification projects using advanced methodologies such as Universal Verification Methodology UVM, SystemVerilog, constrained random, coverage driven, and assertion-based techniques.
Develop and implement comprehensive verification strategies, including architecting test environments, creating test benches, models, assertions, and functional tests.
Own the verification process, ensuring high quality execution across projects and collaborating with teams to meet customer requirements.
Mentor and lead junior engineers in the verification process, while also managing the progress and performance of verification tasks.
Skills
1st or 2.1 degree in Electronics, Physics, or Computer Science from a Tier 1 University.
10+ years of experience working in verification, with a strong background in UVM and SystemVerilog.
Expertise in constrained random verification, code coverage analysis, regression testing, and verification infrastructures.
Experience as a verification lead, responsible for planning and executing verification strategies.
VHDL or Verilog RTL experience.
Mentor Questa and Cadence Incisive. ....Read more...
Type: Permanent Location: Abingdon, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £75000 Per Annum None
Posted: 2026-01-02 17:29:33
-
Electronics PCB Design Engineer required to join an existing product design team working on electronic and printed circuit assemblies PCBs for future products.
This is a fantastic opportunity for an experienced engineer to work on cutting edge technology.
Requirements
Degree or in Electronics, Electrical Engineering, or related subject.
Over 5 years of experience in electronics and multilayer PCB design in a commercial environment.
Over 2 years recent experience using enterprise level PCB design tools Cadence OrCAD, Allegro or Altium Designer.
High speed digital design and PCB signal integrity, stack-up, impedance control, ESD mitigation, and EMC compliance.
Video or camera image processing.
RF and FPGA design knowledge.
Analogue and digital layout, design for test, and design for manufacture.
Interest in high accuracy GNSS and automotive applications contributing to product development from concept through to production.
Responsibilities
Design and layout analogue and digital electronics for PCBs, including component footprint creation and library management.
Determine PCB configurations, outlines, interfaces and interconnects.
PCB fabrication and assembly drawings, bills of materials, and manufacturing data.
Support PCB assembly and resolve manufacturing issues.
Develop and implement PCB production test strategies, including the creation of test platforms and fixtures.
Hardware design verification, troubleshooting, and debugging using oscilloscopes, spectrum analysers, and other test equipment.
Collaborate with firmware developers to ensure seamless integration of hardware and software.
Support product assembly, customer support, and product documentation creation.
Design reviews and document the results.
If you're an experienced Electronic PCB Design Engineer with a passion for high quality design and a collaborative approach to problem solving, keen to drive innovation in the GNSS and automotive sector, then this is role is perfect. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2026-01-02 17:16:29
-
Sales Development Manager to help drive facility utilization boosting revenue and supporting growth.
Experience
Stakeholder management, internal and external.
Excellent communication and presentation skills, with the ability to engage and influence various audiences.
Strategic relationship management and team collaboration.
Seeking and capitalizing on new commercial opportunities.
Public grant funding landscape and the bid process.
CRM systems
Public sector funding and procurement models.
Engineering facility promotion, awareness, marketing and increasing utilization
Role
Increase Facility Utilization: Work with technical leads to promote and raise awareness of Engineering, Aerospace and Robotic facilities.
Business Development.
Sales Pipeline Management.
Lead the development of new business cases driving facility investment.
Public Sector Procurement own the public sector procurement processes. ....Read more...
Type: Permanent Location: Didcot, England
Start: ASAP
Duration: Permenant
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2026-01-02 17:15:27
