-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-12-18 22:08:34
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
Meets and/or exceed production goals and guidelines for daily/weekly production runs.
Observes plant safety rules and regulations at all times, reports all safety hazards in a timely manner.
Other duties as assigned.
EDUCATION REQUIREMENT: No formal educational required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:29
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Team Leader (Manufacturing) is proficient in all areas of production and efficiently & correctly performs all duties in addition to more complex maintenance and continuous improvement.
This is for the evening shift, which is 7:00 pm - 7:30 am.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works under minimal supervision
Adjusts machines to achieve production goals
Collaborates with machine operators in production process
Assists in carrying out production growth strategy
Troubleshoots complex processing problems with little or no assistance
Actively participates in identifying and implementing continuous improvement initiatives
Determines priorities and creates procedures to meet objectives of the plant
Ensures maintenance is completed according to Preventative Maintenance Plan
Cross-trains on all production areas in the facility (i.e.
safety, production, equipment)
Sets production schedule based on plant and customer needs utilizing factors such as lead time and manufacturing efficiency
Supports and validates the work of machine operators by answering questions, preparing production lines, and providing general direction
EDUCATION REQUIREMENT: No formal education requirement
EXPERIENCE REQUIREMENT: 4+ years' experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Windows and MS Office products (Word, Excel, & Outlook)
Excellent organizational and communication skills (both written and verbal)
Positive team player
Knowledge of area operations and related safe work practices/procedures and demonstrated ability to coordinate work activities.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:29
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:27
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:27
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:26
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Cross-train on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT: 3+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:25
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:20
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:15
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Team Leader (Manufacturing) is proficient in all areas of production and efficiently & correctly performs all duties in addition to more complex maintenance and continuous improvement.
This is for the evening shift, which is 7:00 pm - 7:30 am.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works under minimal supervision
Adjusts machines to achieve production goals
Collaborates with machine operators in production process
Assists in carrying out production growth strategy
Troubleshoots complex processing problems with little or no assistance
Actively participates in identifying and implementing continuous improvement initiatives
Determines priorities and creates procedures to meet objectives of the plant
Ensures maintenance is completed according to Preventative Maintenance Plan
Cross-trains on all production areas in the facility (i.e.
safety, production, equipment)
Sets production schedule based on plant and customer needs utilizing factors such as lead time and manufacturing efficiency
Supports and validates the work of machine operators by answering questions, preparing production lines, and providing general direction
EDUCATION REQUIREMENT: No formal education requirement
EXPERIENCE REQUIREMENT: 4+ years' experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Windows and MS Office products (Word, Excel, & Outlook)
Excellent organizational and communication skills (both written and verbal)
Positive team player
Knowledge of area operations and related safe work practices/procedures and demonstrated ability to coordinate work activities.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:13
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee day to day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
Drives the lean process to maximize profitable growth, provides premier customer service, develops a technically qualified workforce, reduce operating cost and inventories through incremental and quantum continuous improvements.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Promotes and ensures a safe and environmentally compliant work environment.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Utilizes Root Cause Investigation skills and data-driven decision making to implement systematic corrective actions.
Directly manages the departmental cell and works cooperatively with other functional teams.
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Leads the production department in meeting or exceeding production goals, including throughput, yield, cost, downtime, scrap, and quality.
managers/supervisor/leaders to optimize the entire value stream.
The Production Manager is relentless about implementing MS168 and continuous improvement.
Works with the Divisional Black Belt to regularly update the Plan's Lean implementation plan.
Makes implementation and results a top priority.
Empowers every employee in the plant through positive reinforcement of Lean.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned or necessary.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
Education/Experience:
HS Diploma with 8+ years' experience, Engineering Degree with 4 years' experience, OR Non-Engineering Degree with 6 years' experience.
All experience must include time managing people in a manufacturing environment.
Other Skills and Abilities:
Direction of Supervisors and development of workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive (example: vacuum) times.
Define standard work for Kettle and Varnish Operators.
Upgrade Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps of Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Benefits and Compensation:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:12
-
JOB DESCRIPTION
WTI/Pure Air Controls Services Estimating Engineer Job Description
Engineer (Preconstruction)
General Purpose:
To assess project requirements, gather technical data, and provide accurate cost estimates for HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with estimating skills to ensure that HVAC projects are planned and budgeted effectively.
Here are the primary purposes and responsibilities of a Preconstruction Engineer:
Responsibilities and Duties:
Determines scope, designs solutions and estimates cost of HVAC restoration projects. Understands components and function of existing mechanical systems that are being altered or renovated. Develops a project scope of work through site visits and discussions with owner / facility staff Exercises control over design and production tasks to enable HVAC restoration projects. Drafts construction documents and generates specifications for HVAC restoration projects. Utilizes in-house estimating tools to create project budgets. Assists sales team with scope reviews and support as needed. Creates, maintains, and improves estimating tools. Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
Conducts on-site visits and assessments to understand the scope and technical intricacies of specific projects.
This includes evaluating existing HVAC systems, identifying any issues or challenges, and gathering data needed for precise estimation. Ensures a smooth transition from estimation to project execution, providing technical guidance and insights as needed.
Qualifications Bachelor's degree or equivalent experience. 3+ years of industry-specific experience. Experience with construction drafting in AutoCAD. EI certification with ability to obtain PE license preferred. Advanced Microsoft Office Suite knowledge preferred. Experience with programming language (VBA, C#, etc.) preferred Experience with cloud based platforms (Pro-Core, E-Builder, iAuditor, etc) preferred. Ability to travel out of state up to 25% The salary range for applicants in this position generally ranges between $88,000 and $110,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-12-18 22:08:12
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee day to day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
Drives the lean process to maximize profitable growth, provides premier customer service, develops a technically qualified workforce, reduce operating cost and inventories through incremental and quantum continuous improvements.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Promotes and ensures a safe and environmentally compliant work environment.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Utilizes Root Cause Investigation skills and data-driven decision making to implement systematic corrective actions.
Directly manages the departmental cell and works cooperatively with other functional teams.
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Leads the production department in meeting or exceeding production goals, including throughput, yield, cost, downtime, scrap, and quality.
managers/supervisor/leaders to optimize the entire value stream.
The Production Manager is relentless about implementing MS168 and continuous improvement.
Works with the Divisional Black Belt to regularly update the Plan's Lean implementation plan.
Makes implementation and results a top priority.
Empowers every employee in the plant through positive reinforcement of Lean.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned or necessary.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
Education/Experience:
HS Diploma with 8+ years' experience, Engineering Degree with 4 years' experience, OR Non-Engineering Degree with 6 years' experience.
All experience must include time managing people in a manufacturing environment.
Other Skills and Abilities:
Direction of Supervisors and development of workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive (example: vacuum) times.
Define standard work for Kettle and Varnish Operators.
Upgrade Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps of Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Benefits and Compensation:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:10
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment
Collect data for process waste reduction
Edit or create P&IDs
Work alongside Process Engineers on Capital Expense Projects
Conduct meetings to communicate information or collaborate on projects
Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required.
Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:08:07
-
JOB DESCRIPTION
WTI/Pure Air Controls Services Estimating Engineer Job Description
Engineer (Preconstruction)
General Purpose:
To assess project requirements, gather technical data, and provide accurate cost estimates for HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with estimating skills to ensure that HVAC projects are planned and budgeted effectively.
Here are the primary purposes and responsibilities of a Preconstruction Engineer:
Responsibilities and Duties:
Determines scope, designs solutions and estimates cost of HVAC restoration projects. Understands components and function of existing mechanical systems that are being altered or renovated. Develops a project scope of work through site visits and discussions with owner / facility staff Exercises control over design and production tasks to enable HVAC restoration projects. Drafts construction documents and generates specifications for HVAC restoration projects. Utilizes in-house estimating tools to create project budgets. Assists sales team with scope reviews and support as needed. Creates, maintains, and improves estimating tools. Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
Conducts on-site visits and assessments to understand the scope and technical intricacies of specific projects.
This includes evaluating existing HVAC systems, identifying any issues or challenges, and gathering data needed for precise estimation. Ensures a smooth transition from estimation to project execution, providing technical guidance and insights as needed.
Qualifications Bachelor's degree or equivalent experience. 3+ years of industry-specific experience. Experience with construction drafting in AutoCAD. EI certification with ability to obtain PE license preferred. Advanced Microsoft Office Suite knowledge preferred. Experience with programming language (VBA, C#, etc.) preferred Experience with cloud based platforms (Pro-Core, E-Builder, iAuditor, etc) preferred. Ability to travel out of state up to 25% The salary range for applicants in this position generally ranges between $88,000 and $110,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-12-18 22:08:06
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Cross-train on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT: 3+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-12-18 22:08:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:57
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-12-18 22:07:51
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment
Collect data for process waste reduction
Edit or create P&IDs
Work alongside Process Engineers on Capital Expense Projects
Conduct meetings to communicate information or collaborate on projects
Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required.
Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:50
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:49
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g.
Hot Work, LOTO, Confined Space),
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure,
Implement the needed preventative measures, including optimization of PM program,
Ensure reliable operation of facility support processes and utilities (i.e.
HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters),
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, lighting) and components (e.g.
sensors, switches, valves),
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g.
product vessels/reactors, pumps) and components (e.g.
piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-18 22:07:28
-
Are you an experienced Business Analyst with the ability to drive operational efficiencies and lead other Business Analysts? Would you like to supercharge your career by working on an entire transformation programme from service design to digital transformation? Let Informed Recruitment help you to achieve your potential with an exciting opportunity for a Senior Business Analyst to lead on formulating, developing, and taking responsibility for end-to-end business solutions within a change portfolio.
As a specialist provider of resource to the Property & Associated Technology markets, we are delighted to be partnering with a social enterprise offering you the opportunity to make a difference and gain experience as part of modern environment championing continual improvement.
The purpose of the role will be to play a pivotal part in leading all business analysis facets of large or complex business change and technology programmes and shape the associated business outcomes.
Your day-to-day responsibilities will include driving the business goals ensuring that they are understood and documented; taking responsibility for the completion of robust analysis in line with the overall delivery plan; stakeholder engagement & analysis; leading on requirement gathering ensuring robust elicitation & validation; translating business requirement into functional & technical specifications by engaging with internal & external stakeholders; improving existing business processes; artefact production; solution support; user acceptance testing; line management; and change impact assessments amongst other responsibilities. Must Have
Demonstrable commercial experience of effectively working independently as a Business Analyst.
Previous experience in line managing, leading, coaching and/or mentoring other Business Analysts.
Stakeholder Engagement and Requirement Elicitation.
Experience of Business Process Mapping and capturing user stories.
Experienced in overseeing UAT sessions, ensuring alignment between requirements and test scenarios.
Experience of a variety of analysis techniques such as SWOT, Pestle, MoSCoW, etc.
A base of formal Business Analysis certification such as BCS Foundation, or evidence of working towards BCS/ISEB Diploma (or similar level of accreditation).
Nice to Have
Power BI/ Power Platform
Knowledge/Experience of Change Management or Continuous Improvement methodologies, tools, and techniques.
Business case development
Ideally a blend of methodology experience covering Agile and more iterative Waterfall projects.
Additional certification such as PRINCE Foundation, PMP, Agile, ITIL, etc.
As an individual you will have excellent problem-solving skills and attention to detail, be a self-starter, driven, and comfortable with taking responsibility for change and delivery.
You will have excellent interpersonal skills, the ability to think on your feet and be ultimately goal orientated.
The role is offered on an initial 18-month fixed term salaried contract with scope to run and, alongside a competitive salary, you will receive a generous a benefits package that includes bonus scheme, generous employer pension, flexible working, generous leave entitlement, life/health insurance and professional development.
The role will be hybrid based, with up to 2/3 days spent in the office in the North-East on a weekly basis, If this role describes you, then please apply without delay for the opportunity to continue your career with a driven yet friendly organisation continually looking to provide a better service to customers.
Informed Recruitment Limited acts as an Employment Business in respect to this vacancy as defined by the Employment Agencies Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, national origin, disability status, or any other basis protected by appropriate law.
All hiring decisions are made based on merit, competence, and business need.
As defined under the General Data Protection Regulation (GDPR), Informed Recruitment is a Data Controller and a Data Processor, and our legal basis for processing your personal data is 'Legitimate Interests'.
You have the right to object to us processing your data in this way.
For more information about this, your rights, and our approach to Data Protection and Privacy, please visit our website. ....Read more...
Type: Contract Location: Newcastle upon Tyne, England
Duration: 18 months
Salary / Rate: £50000 - £51000 per annum + pension, bonus
Posted: 2025-12-18 17:05:03
-
Job Description:
Core-Asset Consulting is delighted to be partnering with a leading fintech firm to recruit an experienced Delivery Lead / Project Manager to play a pivotal role in the successful delivery of both client-facing and internal projects.
Our client is a specialist financial services technology provider supporting institutional clients across multiple regions.
This is a remote position, with access to office space in London or Edinburgh and will involve spending time on client sites in the UK.
Skills/Experience:
Strong experience in a project management role.
Experience working in Agile / Scrum software development environments.
Experience with delivering software development projects within financial services.
Proven experience working with institutional or Tier 1 financial services organisations.
Strong background in managing multidisciplinary teams across multiple locations.
Experience contributing to or leading process development and execution initiatives.
Demonstrated ability to manage stakeholder relationships, both internally and externally.
Comfortable working flexible hours to support global delivery requirements.
Core Responsibilities:
Leading client project deliveries in partnership with senior product consultants.
Spearhead internal delivery initiatives alongside product and engineering teams.
Coordinate internal and client-side project teams, constructively challenging stakeholders where appropriate.
Develop, maintain and manage client-facing delivery plans and budgets.
Develop and maintain internal sprint and delivery plans.
Facilitate regular team meetings and promote collaboration across global teams.
Plan and oversee release management activities through test and production environments.
Drive continuous improvement in delivery processes to support efficient implementations.
Define project success metrics and communicate them clearly to stakeholders.
Proactively manage scope changes, risks, issues and dependencies, implementing contingency plans as required.
Produce and maintain agreed project reporting, updates, and communication materials.
Work closely with internal and client-side project leadership to ensure delivery plans remain aligned and achievable.
Contribute to retrospectives and continuous improvement initiatives, including coaching or supporting junior team members where applicable.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16324
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we're committed to protecting and respecting your privacy.
Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure.
We may change this policy from time to time, so please check this policy occasionally to ensure that you're happy with any changes.
By engaging with us (either by applying for a job we're advertising, registering through our website, or getting in touch with our business) you're agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users.
For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDPERM ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Posted: 2025-12-18 16:53:05
-
Are you an experienced Business Analyst with the ability to drive operational efficiencies? Would you like to supercharge your career by working on an entire transformation programme from service design to digital transformation? Let Informed Recruitment help you to achieve your potential with an exciting opportunity for a Business Analyst to lead on formulating, developing, and taking responsibility for end-to-end business solutions within a change portfolio.
As a specialist provider of resource to the Property & Associated Technology markets, we are delighted to be partnering with a social enterprise offering you the opportunity to make a difference and gain experience as part of modern environment championing continual improvement.
The purpose of the role will be to play a pivotal part all business analysis facets of large or complex business change and technology programmes and shape the associated business outcomes.
Your day-to-day responsibilities will include driving the business goals ensuring that they are understood and documented; Completing robust analysis in line with the overall delivery plan; stakeholder engagement & analysis; requirement gathering ensuring robust elicitation & validation; translating business requirement into functional & technical specifications by engaging with internal & external stakeholders; improving existing business processes; artefact production; solution support; user acceptance testing, and change impact assessments amongst other responsibilities.Must Have
Demonstrable commercial experience of effectively working independently as a Business Analyst.
Stakeholder Engagement and Requirement Elicitation.
Experience of Business Process Mapping and capturing user stories.
Experienced in overseeing UAT sessions, ensuring alignment between requirements and test scenarios.
Experience of a variety of analysis techniques such as SWOT, Pestle MoSCoW, etc.
A base of formal Business Analysis certification such as BCS Foundation, or evidence of working towards BCS/ISEB Diploma (or similar level of accreditation).
Nice to Have
Power BI/ Power Platform
Knowledge/Experience of Change Management or Continuous Improvement methodologies, tools, and techniques.
Business case development
Ideally a blend of methodology experience covering Agile and more iterative Waterfall projects.
Additional certification such as PRINCE Foundation, PMP, Agile, ITIL, etc.
As an individual you will have excellent problem-solving skills and attention to detail, be a self-starter, driven, and comfortable with taking responsibility for change and delivery.
You will have excellent interpersonal skills, the ability to think on your feet and be ultimately goal orientated.
The role is offered on an initial 18-month fixed term salaried contract with scope to run and, alongside a competitive salary, you will receive a generous a benefits package that includes bonus scheme, generous employer pension, flexible working, generous leave entitlement, life/health insurance and professional development.
The role will be hybrid based, with up to 2/3 days spent in the office in the North East on a weekly basis, If this role describes you, then please apply without delay for the opportunity to continue your career with a driven yet friendly organisation continually looking to provide a better service to customers.
Informed Recruitment Limited acts as an Employment Business in respect to this vacancy as defined by the Employment Agencies Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, national origin, disability status, or any other basis protected by appropriate law.
All hiring decisions are made based on merit, competence, and business need.
As defined under the General Data Protection Regulation (GDPR), Informed Recruitment is a Data Controller and a Data Processor, and our legal basis for processing your personal data is 'Legitimate Interests'.
You have the right to object to us processing your data in this way.
For more information about this, your rights, and our approach to Data Protection and Privacy, please visit our website. ....Read more...
Type: Contract Location: Newcastle upon Tyne, England
Salary / Rate: £40000 - £42000 per annum + pension, bonus
Posted: 2025-12-18 16:43:19
-
Production Operative
Tunbridge Wells (High Brooms)
Immediate start (temp-to-Perm)
KHR are currently supporting a well-established electrical manufacturer based in Tunbridge Wells (North Farm) who are looking for a Production Operative to join their team on a temporary basis with the potential of becoming permanent.
As a Production Operative, you'll be involved in the assembly and production of electrical components and systems, working from detailed drawings and written instructions.
The role involves both manual and semi-automated processes, requiring good attention to detail, accuracy, and a commitment to maintaining high-quality standards throughout inspection and testing stages.
Full training will be provided to meet the company's and industry's quality standards.
£12.21ph
Hours: Monday to Friday, 36.25 hours per week
Choose from 8:00 am-4:00 pm or 9:00 am-5:00 pm, with an early finish on Fridays.
Location & Travel:
Free on-site parking is available for drivers.
For those travelling by train, the site is approximately a 25-minute walk from High Brooms Train Station.
This is an excellent opportunity to gain hands-on experience in a technical production environment and become part of a friendly and dedicated manufacturing team.
KH Recruitment Ltd is acting as an Employment Business in relation to this vacancy. ....Read more...
Type: Contract Location: Tunbridge Wells, England
Start: 05/01/2026
Salary / Rate: Up to £12.21 per hour
Posted: 2025-12-18 16:07:51
