-
JOB DESCRIPTION
The Process Engineer will manage and commercialize new processes developed by the Research and Development department into full scale production within the Tremco Corsicana plant.
The Process Engineer will determine which equipment in the plant is most suited to make new products and what modifications may be necessary for such production to successfully occur. Over the next two years, the Tremco Corsicana facility will design, construct, and commission a new reactor.
This new major plant expansion will introduce new production capabilities to the Corsicana facility and is expected to serve as a model project for further plant modernization efforts.
The employee filling this role will lead this expansion project all the way through the commissioning and scaleup phases. In addition to supporting new products and plant expansions, this individual will also manage and optimize existing processes throughout the plant with the goals of maximizing yield and minimizing batch cycle times. SUMMARY OF JOB DUTIES: Safety The Process Engineer will actively participate in process safety reviews, and process hazards analysis as the technical representative. Must understand the hazards of the raw materials, processes, and products in order to develop a safe manufacturing process. Subject matter expert in wide range of chemical plant processes and systems.
Perform safety vent calculations for process upset conditions. Determine the correct control systems and interlocks to safely operate the process. Participate in plantwide process safety programs. LEAN Culture Use knowledge of existing processes to propose process modifications which will reduce waste. The Process Engineer, will be the technical consultant to the plant continuous improvement team. Understand the principle and philosophy behind the implementation of a LEAN culture. Product Quality Provide process knowledge to quality control department in order to troubleshoot quality issues. After developing a new process, coordinate the training of operators with a focus on quality critical product specifications, Standard Operating Procedures and process parameters. Productivity Use knowledge of the manufacturing process to improve productivity through elimination of non-value-added activities. Lead the effort to identify causes which result in productivity levels below the expected. Participate with maintenance in facility continuous improvement programs MINIMUM QUALIFICATIONS (special skills, knowledge, ability, education, etc.): Bachelor's degree from four-year College or university in Chemical Engineering.
6+ years related experience in Process Engineering in a manufacturing environment. Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory.
Knowledge of SAP and demonstrated basic knowledge of Process Control Systems. Understand of plant operations Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
Ability to write speeches and articles for publication that conform to prescribed style and format.
Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be literate in engineering, R&D, maintenance, quality, production, scheduling, forecasting, SAP, finance, EH&S, and will assist in plant management Process oriented Outside of the box thinking Business comprehension
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-04-05 15:11:32
-
JOB DESCRIPTION
General Purpose of the Job:
Is responsible for managing assigned special projects and customers ( including GC and large-scale P&R, TremCare, etc.).
This involves working with the superintendent or Tech Rep assigned to the project to ensure delivery on time and within budget as well as managing all sub-contractors.
Essential Duties and Responsibilities:
Manage field crews and subcontractors with a proven track record in running and supervising commercial and industrial roofing construction projects to deliver projects on time and within budget. •Schedule and manage sub-contractors. •Implement and understand project administration requirements. •Create and update project schedules. •Keep the project on schedule and running efficiently. Ensure quality control management of the project. •Control and schedule all field inspections. •Verify that project work complies with contract documents. •Be responsible for resolving project issues and problems, providing coordination between subcontractors and owner operations, and affirming specifications are followed in accordance with Tremco standards. •Generating reports on project status and ensuring owner satisfaction. •Upholding high levels of health and safety management in compliance with all codes and laws and Tremco Policy. •Willing to travel 100% of the area as needed.Apply for this ad Online! ....Read more...
Type: Permanent Location: Minneapolis, Minnesota
Posted: 2025-04-05 15:11:18
-
JOB DESCRIPTION
The WTI Field Resources Supervisor is responsible for the timely delivery of services, profitability, and all employee management and training within the region.
Duties/Responsibilities, Core Knowledge:
Coordinate staffing and scheduling of all WTI Field Reps in his/her respective region to ensure proper utilization of manpower on specific jobs for highest profitability.
Collaborate with other Field Supervisors as necessary. Oversee the Quality Control (QC) process of all WTI Field Reps in the region, which will include random site visits to previous and current job sites, proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet required percentage.
The Supervisor should stress the profitability factor to all field personnel. Weekly communication with Sales Managers is required.
The Supervisor will field all questions/concerns from the WTI Field Reps and will handle all discrepancies between the WTI Field Reps and the Sales Force. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. The Supervisor will also be the main contact for the office personnel if there are any problems concerning a WTI Field Rep. Ensure that all WTI Field Reps will have a professional appearance and demeanor while completing services for a customer. Conduct training (both hands-on field training and classroom style) for Field Reps, according to WTI Training Policy, to include: Proper completion of all services and related paperwork. Safety training and training documentation for all Field Reps within the region. Approval/certification of each Field Rep including: OSHA Hazard Awareness, ToolBox Talks, etc. Provide training of new contractors on the proper application of Tremco Rood Systems. Demonstrate working knowledge of all services provided. Manage, monitor and document performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work related issues.
Consult with Human Resources as needed. Work in conjunction with the Recruiting Department for hiring of all new personnel.
Ensure that all required paperwork is submitted to the corporate office on a timely basis. Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information. Handle all administrative matters and corresponding paperwork within the region, including: expense management monthly sales projections Field Tech time management status reports bidding jobs with reps large job sign offs, project documentation, etc. Perform any other duty and/or project as required or assigned by the Vice President of WTI General Services.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior supervisory skills and ability to manage people and tasks Prior commercial roofing experience including patch and repair skills Knowledge of Project Management, planning and scheduling skills Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge Understanding of budgeting and expense management Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Work independently; solve problems, and ability to delegate assignments, such as quoting and pricing Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx.
100 lbs.
over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc) Ability to travel out of town, may include overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The salary range for applicants in this position generally ranges between $70,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tallahassee, Florida
Posted: 2025-04-05 15:11:14
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Supply Chain Network Analyst analyzes optimization efforts, identifies business needs, tracks performance metrics, evaluates risks/opportunities and drives improvements in the supply chain process.
Effectively communicates to leadership and leads initiatives in support of the Supply Chain Optimization Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key supply initiatives and inventory targets. Maintain Dryvit SIOP process - monthly plant meetings and network inventory management. Analyzes data to help set DOI targets and manage deliverables for OSD reduction process and excess inventory reduction efforts.
Determines inventory needs including but not limited to quantity, quality, location, etc.
Create cross functional accountability in optimization projects.
Manage PIF process and after launch follow- ups for new products and exits.
Dryvit SKU rationalization - work with inventory specialist to analyze data, change status, and balance existing product amongst plants.
Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making.
Identifies significant and/or critical supply-demand imbalances.
Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution.
Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network.
Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity.
Provides continuous process mapping support as new methods and sites are added to the network.
Travels to sites in the network to fully understand processes and workflows.
In scope deliverables include all upstream products that are part of the system.
Completes or leads special projects or other supply chain functions as assigned.
EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field.
EXPERIENCE REQUIREMENT:
Educational experience with a degree in Supply Chain or professional experience including one year in demand planning.
Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment.
Experience in formulating and implementing optimization models is a plus.
Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data.
CERTIFICATES, LICENSES, REGISTRATIONS:
APICS preferred, or green belt desired.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Preferred SAP APO and BW knowledge.
Strong MS office skills, with advanced proficiency in Excel.
Knowledge of analytical techniques in optimization, and statistical modeling.
Strong analytical and problem-solving skills.
Ability to collaborate across the organization.
Demonstrates strong verbal and written communication skills with active listening practices.
Self-managed and motivated to contribute individually as well as a member of the team.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $65,000 and $75,000 plus a bonus opportunity.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-04-04 15:10:47
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Supply Chain Network Analyst analyzes optimization efforts, identifies business needs, tracks performance metrics, evaluates risks/opportunities and drives improvements in the supply chain process.
Effectively communicates to leadership and leads initiatives in support of the Supply Chain Optimization Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key supply initiatives and inventory targets. Maintain Dryvit SIOP process - monthly plant meetings and network inventory management. Analyzes data to help set DOI targets and manage deliverables for OSD reduction process and excess inventory reduction efforts.
Determines inventory needs including but not limited to quantity, quality, location, etc.
Create cross functional accountability in optimization projects.
Manage PIF process and after launch follow- ups for new products and exits.
Dryvit SKU rationalization - work with inventory specialist to analyze data, change status, and balance existing product amongst plants.
Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making.
Identifies significant and/or critical supply-demand imbalances.
Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution.
Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network.
Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity.
Provides continuous process mapping support as new methods and sites are added to the network.
Travels to sites in the network to fully understand processes and workflows.
In scope deliverables include all upstream products that are part of the system.
Completes or leads special projects or other supply chain functions as assigned.
EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field.
EXPERIENCE REQUIREMENT:
Educational experience with a degree in Supply Chain or professional experience including one year in demand planning.
Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment.
Experience in formulating and implementing optimization models is a plus.
Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data.
CERTIFICATES, LICENSES, REGISTRATIONS:
APICS preferred, or green belt desired.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Preferred SAP APO and BW knowledge.
Strong MS office skills, with advanced proficiency in Excel.
Knowledge of analytical techniques in optimization, and statistical modeling.
Strong analytical and problem-solving skills.
Ability to collaborate across the organization.
Demonstrates strong verbal and written communication skills with active listening practices.
Self-managed and motivated to contribute individually as well as a member of the team.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $65,000 and $75,000 plus a bonus opportunity.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-04-04 15:10:29
-
Field Applications Engineer - Control Systems/Automation
Are you a Field Applications Engineer with extensive experience in a customer-facing support role, specialising in Control Systems, Automation, and PLCs?
If so, our client, a global leader in this field, is looking to add a key hire to their high-performing team.
In this role, you will be home-based with regular field visits, using a company-provided car to travel to customers across the UK.
This position sits between the sales function while also involving hands-on technical work.
Key Responsibilities of this Field Applications Engineer job:
Visiting customer sites to assess and implement new solutions for existing control systems, including PLCs and automation technologies.
Providing servicing, maintenance, and installation support for control systems to ensure optimal performance and reliability.
Supporting customers and distributors with technical troubleshooting, product setup, and issue resolution.
Managing project execution, from reviewing proposals to overseeing implementation and ensuring timely completion.
Conducting site surveys and industry testing to identify quality concerns, provide feedback, and support R&D in product improvements.
Requirements of this Field Applications Engineer job:
3+ years of experience working with PLCs, control systems, and automation, providing hands-on technical support, servicing, and maintenance.
Proven ability to deliver tailored sales solutions to customers by assessing their automation needs and recommending appropriate control system upgrades or enhancements.
Degree or equivalent in Engineering.
Strong proficiency in PLC programming, including CODESYS.
To apply for this Field Applications Engineer role, please send your CV to NDrain@redlinegroup.Com or call 01582 878828 / 07487 756328. ....Read more...
Type: Permanent Location: Coventry, England
Start: ASAP
Salary / Rate: £45000 - £60000 per annum
Posted: 2025-04-04 15:09:09
-
An established Steel and Architectural Metalwork company based in London is seeking an experienced Non-Working Supervisor / Site Manager to join their team immediately.Key Responsibilities
Oversee daily site activities, ensuring smooth execution of tasks and adherence to project timelines.
Work closely with suppliers, subcontractors, and internal teams to manage material deliveries and workflow.
Monitor project milestones, identifying and addressing potential delays.
Ensure strict compliance with health and safety regulations on-site.
Conduct quality inspections to maintain high construction standards.
Proactively resolve on-site challenges, ensuring minimal disruption to the project.
Key Qualifications
Previous experience in a supervisory or site management role, particularly in architectural metalwork.
Strong understanding of construction processes, safety guidelines, and quality control measures.
Effective leadership and communication skills, with the ability to manage teams efficiently.
Ability to multitask and work effectively in a fast-moving construction environment.
Certifications in construction management or health and safety (preferred).
Offer
Salary £50,000
The chance to work on a high-profile project in the industry.
A collaborative and supportive work environment with opportunities for professional development.
To apply, please submit your most recent CV, and we will be in touch. ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: Up to £50000.00 per annum
Posted: 2025-04-04 14:43:19
-
CNC Turner
Location: Gosport, Portsmouth
Salary: £16-18 per hour (dependent on experience)
Shift: Day shift, 39 hours per week
CNC Turner Overview:
We are seeking a competent CNC Turner to join our clients team near Gosport, Portsmouth.
The company operates as a small subcontractor for multiple markets including Aerospace, Motorsport and Oil & Gas.
The ideal candidate will have experience setting and operating Fanuc controlled lathes in a precision engineering environment.
CNC Turner Responsibilities:
- Setting and operating Fanuc controlled lathes
- Working with various alloys and materials
- Performing tool changes and offsets accurately
- Ensuring high-quality output and adherence to specifications
- Collaborating with the team to meet production deadlines
CNC Turner Requirements:
- Proven experience as a CNC Turner
- Proficiency in operating Fanuc controlled lathes
- Strong understanding of offsets and tool changes
- Ability to work with precision and attention to detail
- Excellent problem-solving and troubleshooting skills
How to apply for the CNC Turner role:
Please either Apply directly on contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Gosport,England
Start: 04/04/2025
Salary / Rate: £16 - £18 per hour
Posted: 2025-04-04 13:13:03
-
CNC Miller
Location: Andover
Salary: £16-£18 per hour
Holt Engineering are seeking a couple of skilled CNC Millers to join our growing team in Andover.
As a leading precision engineering company, they specialise in producing high-quality components for various industries and have recently just landed a very large automotive contract.
CNC Miller Responsibilities:
- Operating and setting CNC machining centres (Mazak, Heidenhain, Fanuc).
- Editing CNC programs.
- Producing high-precision components to tight tolerances.
- Ensuring quality standards and meeting production deadlines.
- Collaborating with the team to achieve production goals.
- Maintaining and troubleshooting CNC machines.
CNC Miller Requirements:
- Proven experience in CNC machining, preferably with Mazak, Heidenhain, and Fanuc controls.
- Proficient in offsets and tooling changes.
- Strong understanding of machining processes and materials.
- Ability to read and interpret engineering drawings.
- Good attention to detail and problem-solving skills.
- Willingness to work overtime as needed.
CNC Miller Benefits:
- Competitive salary (£16.00 - £18.00 per hour)
- Opportunities for career progression
- On-site parking
- Overtime opportunities
- Health surveillance checks
- Training and development opportunities
How to apply for the CNC Miller role:
If you are a skilled CNC Miller and passionate about precision engineering, we encourage you to apply.
To apply, please send your CV directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Andover,England
Start: 04/04/2025
Salary / Rate: £16 - £18 per hour
Posted: 2025-04-04 13:11:03
-
Sprayer
Location: Cirencester
Salary: up to £14p/h
Sprayer Overview:
Holt Engineering are seeking a skilled or semi-skilled Sprayer to join our client.
They specialise in producing internationally bespoke enclosures and sheet metal work for a variety of clients and sectors.
As a Powder Coat Sprayer, you will be responsible for operating the powder coat line and controlling the powder coating application process.
You will need a good understanding of the powder coating process to ensure high levels of quality and productivity.
Sprayer Responsibilities:
- Daily application of powder coating to products.
- Daily fault-finding and development of application processes.
- Completing daily maintenance tasks on the plant.
- Developing new paint schemes on the plant.
- Ensuring finishing facilities are clean and tidy to maintain high-quality standards.
- Developing skills and knowledge on the plant, understanding system limitations and identifying productivity improvements.
Sprayer Requirements:
- Experience in powder coating (skilled or semi-skilled).
- Ability to operate and maintain powder coating equipment.
- Strong attention to detail and a commitment to quality.
- Good problem-solving skills.
- Ability to work independently and as part of a team.
Sprayer Benefits:
- Competitive pay: £12.50 - £14 per hour.
- Company pension.
- Free on-site parking.
- Life insurance.
- Sick pay.
- Day shift with overtime opportunities.
How To Apply for the Sprayer role:
If you are a motivated and skilled Powder Coat Sprayer looking for a new challenge, please apply either directly of by contacting Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Cirencester,England
Start: 04/04/2025
Salary / Rate: £12 - £14 per hour
Posted: 2025-04-04 13:08:10
-
Welder
Location: Andover
Salary: up to £18p/h
Join a Dynamic Fabrication Team!
We are seeking a highly skilled and experienced MIG/TIG Welder to join our clients growing team.
If you are a dedicated and detail-oriented professional with a passion for quality craftsmanship, we want to hear from you!
Welder Overview:
As a MIG/TIG Welder, you will be responsible for producing high-quality welds on a variety of materials, adhering to strict tolerances and specifications.
You will work within a fast-paced fabrication environment, contributing to diverse and exciting projects.
Welder Responsibilities:
- Perform high-quality MIG and TIG welding on various materials (e.g., steel, stainless steel, aluminium, brass).
- Read and interpret engineering drawings and specifications.
- Set up and operate welding equipment, ensuring proper settings and maintenance.
- Inspect and verify welds for quality and compliance.
- Maintain a clean and safe working environment.
- Work effectively both independently and as part of a team.
- Adhere to all company safety regulations and procedures.
Welder Qualifications and Experience:
- Proven experience as a MIG/TIG Welder.
- Proficiency in reading and interpreting engineering drawings.
- Strong understanding of welding techniques and procedures.
- Ability to work with various materials and thicknesses.
- Experience with welding inspection and quality control.
- Relevant welding certifications (e.g., coded welder) are highly desirable.
- Excellent attention to detail and a commitment to quality.
- Strong work ethic and a positive attitude.
Welder Benefits:
- Competitive salary based on experience.
- Opportunity for professional growth and development and working on varying products.
- Well-equipped workshop.
- Supportive and collaborative team environment.
How to Apply for the Welder role:
Please either apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Andover,England
Start: 04/04/2025
Salary / Rate: £16 - £18 per hour
Posted: 2025-04-04 13:05:06
-
CNC Turner
Location: Romsey
Salary: Up to £20 per hour
Is it time to join a Precision Engineering Team?!
We are seeking a highly skilled and experienced CNC Turner with strong Fanuc programming abilities to join our clients expanding team.
If you are a dedicated and detail-oriented machinist who takes pride in producing high-quality components, we want to hear from you!
CNC Turner Overview:
As a CNC Turner, you will be responsible for programming, setting, and operating our CNC turning machines, primarily utilising Fanuc controls.
You will work on a variety of materials and produce precision components to tight tolerances, contributing to their diverse range of projects.
CNC Turner Responsibilities:
- Program, set, and operate CNC turning machines with Fanuc controls.
- Interpret engineering drawings and specifications.
- Select and set appropriate tooling and work holding devices.
- Perform first-off inspections and in-process quality checks.
- Troubleshoot and resolve machining issues.
- Maintain a clean and safe working environment.
- Work effectively both independently and as part of a team.
- Contribute to continuous improvement initiatives.
CNC Turner Requirements:
- Proven experience as a CNC Turner.
- Strong proficiency in Fanuc programming (desirable).
- Ability to read and interpret engineering drawings and specifications.
- Experience with various materials (e.g., steel, aluminium, stainless steel).
- Knowledge of tooling selection and application.
- Excellent understanding of machining principles and techniques.
- Strong attention to detail and a commitment to quality.
- Ability to work to tight tolerances.
- Good problem-solving skills.
CNC Turner Benefits:
- Competitive salary based on experience.
- Excellent benefits package (including pension).
- Opportunity for professional growth and development.
- Modern and well-equipped workshop.
- Supportive and collaborative team environment.
How to apply for the CNC Turner role:
Apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Romsey,England
Start: 04/04/2025
Salary / Rate: £18 - £20 per hour
Posted: 2025-04-04 12:59:07
-
The Maintenance Engineer vacancy is working with a market leading manufacturer of building products, based in the Reading area.
The position offers excellent opportunities for both training and career development.What's in it for your as a Maintenance Engineer:
Hours of work 42 hours per week from Monday to Friday - based on a rotational 3 shift pattern of 8-hour days, afternoons and nights.
6 hours work is required every 3rd Saturday morning.
Salary - £57,134
Overtime at 1.5x for Monday to Saturday and 2x for Sundays and bank holidays
Service Bonus
KPI Bonus
Excellent pension company contribution, plus employee benefits package
Training and career development opportunities
26 days holidays plus bank holidays
Main Duties & Responsibilities of Maintenance Engineer include:
Ensure the continuous running of the production process by eliminating downtime through a safe and logical approach to fault finding and maintenance of equipment.
You'll be involved in a variety of tasks, ensuring a proactive approach to preventing equipment failure.
Working on various types of equipment including complex hydraulic, pneumatic, and electrical/electronic control systems, you'll be responsible for carrying out a range of planned and reactive activities on site.
Monitor & supply support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineer Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Good knowledge of Electrical / Mechanical Engineering within a heavy industrial / manufacturing environment
PLC programming skills with knowledge of Allen Br
Ability to fault find, repair and provide solutions to problems.
This position would suit a Multi Skilled Engineer with a recognised background in, either Mechanical or Electrical.Please apply directly for this position. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £57000.00 - £57134.00 per annum
Posted: 2025-04-04 12:09:59
-
Quality Manager - Stoke-on-Trent
An exciting opportunity at a leading manufacturer has hit the market; our client is hiring for a Quality Manager with a manufacturing/production background based in Stoke-on-Trent.
The Quality Manager will directly report to the Operations Director and will lead a team to drive quality excellence across manufacturing operations.
Main responsibilities of the Quality Manager, based in Stoke-on-Trent:
Develop, implement, and maintain the AS9100 Quality Management System (QMS)
Lead and mentor internal auditors while overseeing internal audits
Drive continuous improvement initiatives to enhance product quality and operational efficiency
Oversee quality control and inspection of raw materials, in-process components, and finished products
Act as the primary point of contact for customer quality issues, leading root cause analysis (8D, CAPA, RCCM)
Collaborate with suppliers to ensure incoming materials meet required specifications
Manage regulatory compliance and audits, ensuring adherence to industry standards
Requirements of the Quality Manager, based in Stoke-on-Trent:
Degree in Engineering, Quality Management, or a related field (or equivalent experience)
5+ years' experience in a Quality Manager role within a regulated manufacturing environment (Aerospace, Defence, Industrial)
Strong knowledge of AS9100, ISO 14001, and quality improvement methodologies
Proficient in 8D, CAPA, Six Sigma, Root Cause Analysis
Strong leadership, problem-solving, and analytical skills
This is a great opportunity for a Quality Manager with a passion for high standards, continuous improvement, and leadership in a fast-paced manufacturing environment.
To apply for this Quality Manager role in Stoke-on-Trent please send your CV to kchandarana@redlinegroup.com or please call 01582 878 830 / 07961 158 784 ....Read more...
Type: Permanent Location: Stoke-on-Trent, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-04-04 11:34:53
-
An established Structural Steel company based in Edinburgh is seeking an experienced Steel & Cladding Site Manager to join their team immediately.Key Responsibilities
Lead and manage on-site activities for steel and cladding projects, ensuring completion within schedule, budget, and required standards
Oversee project workflows, coordinate staff, equipment, and materials, and manage scheduling for deliveries and installations
Take responsibility for project timelines, reviewing all construction package details alongside key stakeholders
Supervise site personnel, subcontractors, and suppliers to ensure smooth and efficient operations
Maintain compliance with health and safety regulations, ensuring all necessary documentation is up to date
Generate regular progress reports for clients and internal teams, identifying any challenges or delays
Work closely with other contractors to resolve project-related issues effectively and maintain clear communication
Ensure quality control by keeping accurate records and confirming that any additional work is approved and documented properly
Verify that subcontracted work aligns with agreed specifications and pricing
Manage site-based operational costs, keeping unnecessary expenses to a minimum
Track project milestones and report concerns or potential setbacks to senior management
Review and interpret technical drawings, ensuring precise execution on-site
Collaborate with engineers, architects, and clients to meet project specifications
Maintain detailed documentation, including records of progress, design modifications, and material usage
Provide strong leadership, ensuring the team remains motivated, productive, and aligned with project goals
Key Qualifications
At least 3 years of experience in site management, specifically in steel and cladding construction
Extensive knowledge of steel structures and cladding installation processes
Strong leadership and communication skills with the ability to manage and support teams effectively
Solid understanding of health and safety regulations within the construction sector
Proficiency in reading and interpreting construction plans and technical drawings
Excellent problem-solving skills with keen attention to detail
Mandatory Certifications
CSCS Card (Site Manager level)
First Aid at Work Certification
SMSTS Training Certification
Comfortable using Microsoft Office and other relevant software
Other Details
Salary: £70,000
To apply, please submit your most up-to-date CV, and we will be in touch. ....Read more...
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Salary / Rate: Up to £70000.00 per annum
Posted: 2025-04-04 11:10:10
-
Accounts Team Lead required for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff.
This employer is recognised globally for quality and innovative deliverables.The successful Accounts Team Lead will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Accounts Team Lead will include:
Manage the Accounts Receivable and Accounts Payable processes
Set KPI's for a team of Accounts Assistants and provide mentorship and guidance
Manage the company corporate purchasing cards
Work with internal departments to ensure new suppliers are onboarded inline with policies and procedures
Support with month end processes
Conduct customer and supplier statement reconciliations ensuring ledgers are accurate and up to date
For the Accounts Team Lead role, we are keen to receive CV's from candidates who possess:
Experience in a Accounts Team Leader or Manager position within a manufacturing environment
Experience with SAP is essential
Management experience of a team of Accounts Assistants
Ability to work under pressure and to deadlines
A proactive approach to tasks
Salary & Benefits:
up to £35,000 per annum (depending on experience)
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank Holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions.
These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Accounts Team Lead role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £30000.00 - £35000.00 per annum
Posted: 2025-04-04 11:02:23
-
Temporary contract for a Financial Accountant on behalf of Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff.
This employer is recognised globally for quality and innovative deliverables.The successful Financial Accountant will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Financial Accountant will include:
Provide technical knowledge and guidance of IFRS 15 and UK GAAP
Prepare statutory financial statements and support with Year-end, Weekly and bi-weekly cashflow and monthly reporting.
Support in the R&D tax credit process, working with external advisors on annual claims
Provide support with annual budgets and forward forecasts
Reporting directly to the Financial Controller, assist in ensuring standardised reporting and drive improvements where necessary
For the Financial Accountant role, we are keen to receive CV's from candidates who possess:
Strong understanding of IFRS 15 and UK GAAP reporting standards
Experience preparing statutory financial statements
Strong user of SAP
Experience within a manufacturing environment and the management of working capital and cashflow
Salary & Benefits:
up to £475 per day (depending on experience)
Temporary contract
Monday to Friday
37.5 hours per week
Please be aware that many roles working for our client will be subject to both security and export control restrictions.
These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Financial Accountant role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information.
....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: Up to £475 per day
Posted: 2025-04-04 10:46:21
-
I am currently seeking a Contract / Perm Civils Project Manager for work on Marine Civils Projects. Initially working around London with future projects covering London & home counties.This will initially be a Temp role with the opportunity to go perm
This role would include but not be limited to the below, Oversee delivery of the project until completion, including project planning, scheduling, budgeting, job costing, and quality control, Collaborate with engineers, designers, subcontractors to ensure that all project requirements are met, and that projects are delivered on time and within budget, Ensure works are installed within tolerance and all QA is signed off as required by Client., Manage any defect works to spec, on time and within budget, Conduct weekly project status meeting with the Client to ensure that all stakeholders are informed of project progress, issues, and risks, Communicate regularly with the Client and other third parties to provide updates on project progress and resolve any issues that may arise, Ensure compliance with all safety and environmental regulations and policies, Ensuring H&S policy is followed at all times, Ensure adherence to relevant laws, regulations, and company policies
The Ideal Candidate will have, Previous experience as a Project Manager, Construction Manager, Agent or similar, Solid commercial acumen with experience of NEC contracts, Experience producing and managing programmes using Microsoft Project or similar., CSCS, SMSTS, 2x References, Relevant experience within Civils, Degree within Engineering, Construction or similar
If you are keen apply now or for more information, please contact Sam Jaffe at Cavendish
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience.
All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief ....Read more...
Type: Contract Location: London, England
Start: ASAP
Posted: 2025-04-04 09:03:51
-
An exciting opportunity has arisen for a PMO Analyst to join a prestigious foreign bank based in the heart of Central London.
This is an office-based role offering excellent benefits, salary up to £35,000 and the chance to contribute to high-impact projects within a dynamic financial services environment.
As a PMO Analyst, you will play a vital role in supporting project governance, reporting, financial tracking, and resource planning within the Project Management Office.
You will work closely with project managers and stakeholders to ensure project delivery aligns with regulatory expectations and internal standards.
You will be responsible for:
* Support the implementation of project governance frameworks and maintain compliance with internal project delivery standards.
* Prepare high-quality reports, dashboards, and presentations for senior stakeholders.
* Track project budgets, forecasts, and resource allocations, highlighting risks and variances.
* Maintain accurate and up-to-date documentation including schedules, risk logs, and change registers.
* Monitor project performance metrics and analyse trends to support continuous improvement.
* Coordinate stakeholder communications and facilitate project reviews and lessons-learned sessions.
* Administer project management tools (e.g., MS Project, JIRA, Trello, Power BI) and provide user support.
* Assist in the development of PMO standards, templates, and tools to enhance delivery capability.
What we are looking for:
* Previous experience as a PMO Analyst, Project Support Analyst, Governance Analyst, Project Coordinator, Project Analyst, Project Monitoring Analyst, Project Control Analyst or in a similar project support role.
* Possess experience in working in bank or financial firm.
* Strong understanding of project management methodologies such as Agile, Waterfall, or Hybrid.
* Bachelor's degree in Business, Project Management, or related field.
* Skilled in project management and reporting tools such as MS Project, JIRA, or Power BI.
* Strong attention to detail and excellent organisational and time management skills.
* A project management certification (e.g.
PRINCE2, PMP, AgilePM) is desirable but not essential.
What's on offer:
* Competitive salary
* Discretionary annual bonus
* Excellent pension and private medical insurance
* Life assurance
* Gym membership contribution
* Season ticket loan
* Career development within a highly respected financial institution
Apply now for this exceptional PMO Analyst opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Central London, England
Start:
Duration:
Salary / Rate: £35000 Per Annum
Posted: 2025-04-03 17:33:46
-
Bodyshop Controller / Workshop Controller / Workshop Manager Vacancy:
- Salary: Paying up to £40,000 basic salary plus bonus
- 25 days holiday plus bank holidays
- Pension
- Permanent Vacancy
We have a fantastic opportunity for a Semi Productive Bodyshop Controller to join a dynamic and expanding Accident Repair Centre in the Tyldesley area.
Key Bodyshop Controller Responsibilities:
- Working closely with the Bodyshop productives you will be responsible for ensuring that all body repairs and paintwork meet defined quality procedures.
- Assisting Bodyshop Manager as required
- Covering for Bodyshop Manager in their absence
- Performing repairs to an extremely high standard in Panel Repair/Strip/Refit
- Repairing through to filler stage
- You will also be responsible for overseeing and motivating a team of productive staff as well as working closely with the estimators to ensure that the site is as profitable as possible
As a Bodyshop Controller you will:
- Be working in a similar role as a Bodyshop Workshop Controller or in a supervisory role within a Bodyshop
- At least 3 years experience in Panel Beating
- MET experience
- Level 3 qualification is desirable
If you want to hear more about the Bodyshop Controller role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.
Bodyshop Controller £45,000 Bodyshop Tyldesley
Bodyshop Controller / Workshop Controller / Workshop Manager ....Read more...
Type: Permanent Location: Tyldesley,England
Start: 03/04/2025
Salary / Rate: £40000 per annum, Benefits: + Bonus
Posted: 2025-04-03 15:49:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Field Material Installer applies coating material to new residential construction (homes, condos, and multi-family projects).
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Load materials, tools, and equipment onto the vehicle to be transported to the jobsite.
Install each job using company-approved methods.
Move each job along at a pace to ensure efficiency and quality.
Complete any necessary prep work for proper installation.
Inspect products and materials for defects prior to installation.
Perform quality checks after products are installedto ensure the job is completed toboththebuilder's and Tremco's scope.
Ensure thework areas at theshop and jobsite arecleanedand that trash and wasteare properly disposed.
Complete any necessary paperwork as required for each job.
Comply with all company safety policies and procedures.
Keep timesheetsupto date and accurate.
EDUCATION REQUIREMENT:
No formal education requirement.
EXPERIENCE REQUIREMENT:
No formal experience requirement.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's licenserequired.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2025-04-03 15:15:38
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-04-03 15:12:05
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Field Material Installer applies coating material to new residential construction (homes, condos, and multi-family projects).
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Load materials, tools, and equipment onto the vehicle to be transported to the jobsite.
Install each job using company-approved methods.
Move each job along at a pace to ensure efficiency and quality.
Complete any necessary prep work for proper installation.
Inspect products and materials for defects prior to installation.
Perform quality checks after products are installedto ensure the job is completed toboththebuilder's and Tremco's scope.
Ensure thework areas at theshop and jobsite arecleanedand that trash and wasteare properly disposed.
Complete any necessary paperwork as required for each job.
Comply with all company safety policies and procedures.
Keep timesheetsupto date and accurate.
EDUCATION REQUIREMENT:
No formal education requirement.
EXPERIENCE REQUIREMENT:
No formal experience requirement.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's licenserequired.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2025-04-03 15:12:03
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-04-03 15:11:55
-
Head ChefSalary starts at $5,527 per month
Things to know:, Indian Restaurant in Hong Kong part of a well-known Indian Group, The company will cover VISA expenses and provide you with accommodation for the first month, Annual flight tickets
What you will be doing as a Head Chef:, Assisting the Executive Chef with the day-to-day running of the kitchen , Ensuring ordering and stock control are managed appropriately., Mentoring and guiding the kitchen team, Making sure HACCP and due diligence requirements are consistently up to standard., Maintaining the quality of food and service
You'll be a great fit if you:, Have experience as a Head Chef or Senior Sous Chef in a Michelin-star kitchen, Strong background within the 2 / 3 rosette market, A strong understanding of Indian Cuisine, Can demonstrate exceptional attention to detail, Can work autonomously or as part of a team, Are motivating, encouraging, and inspirational with a passion, Have experience with P&L management, purchasing of stock, and experience at delivering a budget
LEGAL REQUIREMENTSSpayse's undertaking is as a recruitment agent in this role and are bound by the requirements requested by our client. ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Salary / Rate: Up to US$5400 per month + starting
Posted: 2025-04-03 14:58:02
