-
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes.
The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2025-12-15 10:58:53
-
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician.
In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities.
Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £48000 Per Annum None
Posted: 2025-12-15 10:58:51
-
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test.
Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £48000 Per Annum None
Posted: 2025-12-15 10:57:49
-
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians.
The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £46000 - £50000 Per Annum None
Posted: 2025-12-15 10:57:47
-
The Test Engineer will join a Systems Engineering team critical in space thruster engine development.
You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components.
This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop.
Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc.
Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2025-12-15 10:57:45
-
The successful candidate will support hazardous operations, testing firing sites.
You will work closely with Lead Test Engineers to prepare and maintain test sites, handle propellants, conduct sampling and analysis, and perform various critical operational tasks.
Key Responsibilities
Ensure correct feedline pressures are set for testing procedures.
Assist Lead Test Engineers with site preparation and maintenance.
Handle and sample propellants, conduct analysis, and perform system checks.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and maintain steam boiler operations.
Collate and review test data for reporting and analysis.
Operate high-pressure gas and fluidic systems with expertise.
Utilize electrical and electronic measurement and testing equipment.
Prepare, install, remove, and decontaminate customer flight hardware, including test engine instrumentation.
Skills and Competencies
Proven experience as a Mechanical Fitter.
Strong understanding of high-pressure gas and fluidic systems.
Ability to read and interpret Piping and Instrumentation Diagrams.
Experience with mechanical systems, vacuum systems, and steam boiler maintenance.
Proficient in using measurement and testing equipment ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £42000 Per Annum None
Posted: 2025-12-15 10:55:38
-
The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells.
This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test.
Key Responsibilities
Perform site maintenance and assist in site set-up and take-down activities related to testing.
Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements.
Test and verify broadband seismic instruments, including surface and borehole setups.
Engage with database management for equipment tracking and test documentation.
Handle and operate vacuum and pressure systems as needed.
Conduct tests on electrical motors and oversee the function testing of all engines.
Prepare and produce detailed test procedures for use by the test team during operations.
Requirements
Experience working in the space industry, with a strong understanding of relevant technologies and standards.
Proficiency in database management for tracking and documentation purposes.
Familiarity with vacuum and pressure systems.
Hands-on experience in testing electrical motors and conducting function tests on engines.
Demonstrated ability to prepare comprehensive test procedures. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £48000 Per Annum None
Posted: 2025-12-15 10:55:36
-
This role involves working with high-pressure gas and fluidic systems, engine testing, and test facility operations to ensure optimal performance and safety standards.
Key Responsibilities
Conduct engine testing and ensure correct feedline pressures are set.
Operate and maintain mechanical and steam vacuum systems.
Perform pressure and control system checks.
Set up and operate Data Acquisition Systems and thermal imaging cameras.
Carry out instrumentation calibrations and ensure compliance with testing standards.
Work extensively with high-pressure gas and fluidic systems.
Experience Required:
Strong mechanical fitting skills.
Solid understanding of mathematics and physics.
Hands-on experience in engine testing and test facility operations.
Experience in maintenance and operation of mechanical systems.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £40000 Per Annum None
Posted: 2025-12-15 10:54:31
-
An exciting opportunity has arisen for a Software Developer to join a leading provider of advanced flight simulation technology.
You will develop real-time software used in state-of-the-art Full Flight Simulators and Fixed Training Devices that replicate the form, fit, and function of real aircraft flight decks.
This role sits at the heart of a major transformation programme and is ideal for someone who is hands-on, motivated, and eager to implement change in a fast-paced, customer-focused environment.
Key Responsibilities for the Software Developer
- Develop real-time software for flight simulators, from control systems to graphical user interfaces.
- Support integration, testing, fault finding, and problem resolution on simulated systems.
- Contribute to the full product lifecycle, from requirements analysis through to customer acceptance and post-delivery support.
What Youll Bring
- Strong C programming skills.
- Practical understanding of the Systems Engineering V-model and/or Software Development Lifecycle.
- Ability to work collaboratively in a multi-disciplinary team, with minimal supervision.
- Strong communication and presentation skills.
- Degree in engineering, mathematics, science, or equivalent experience within aviation/aerospace engineering.
Desirable Skills
- Experience with safety-critical systems in aerospace, automotive, or related industries.
- Knowledge of C#, C++, web technologies (JavaScript, HTML), and Windows application development (Visual Studio).
- Familiarity with ARINC, AFDX, or CAN bus protocols.
- Experience using the Atlassian toolset (Jira, Confluence, Bitbucket, Bamboo).
Benefits
- 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days.
- Private medical insurance (with optional family cover).
- Pension scheme with up to 7% employer contribution.
- Life assurance (4x salary, flexible up to 10x).
- Group income protection.
- Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme.
- Employee assistance programme for mental health and wellbeing.
- Subsidised staff restaurant and on-site parking with electric vehicle charging.
Why Join
- Challenging Projects: Work on cutting-edge flight simulators used by global aerospace organisations.
- Collaborative Environment: Partner with experts across systems, hardware, and software engineering.
- Innovative Technology: Develop next-generation simulation solutions, including avionics hardware and advanced control systems.
- Career Growth: Opportunities for professional development and advancement within a forward-thinking, global industry.
Eligibility: Applicants must have the right to work in the UK.
This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide.
TT ....Read more...
Type: Permanent Location: West Sussex,England
Start: 15/12/2025
Salary / Rate: Competitive
Posted: 2025-12-15 10:30:07
-
Are you looking for an Electronics Test Technician role based in Glasgow?
My client is looking for a handful of enthusiastic, inquisitive, and determined individuals who are looking for a challenging and fulfilling career to join our Repair team.
As part of a world-leading aerospace technology business is expanding its repair facility in Glasgow, you will be supporting major OEMs.
Including those supplying Airbus and Boeing, trusted by more than 300 airlines worldwide, this organisation develops advanced systems that transform how aircraft data is collected, managed and utilised.
You'll be responsible for testing, diagnosing, and repairing complex electronic systems used across global aviation fleets, directly contributing to safety, performance, and operational efficiency.
The Key Responsibilities for this Electronics Test Technician Role based in Glasgow:
Set up and conduct tests on electronic equipment, components and prototypes
Analyse data to ensure full compliance with engineering and regulatory standards
Diagnose and repair faults in electronic assemblies and systems
Perform maintenance, updates, and upgrades where required
Maintain accurate repair/test documentation and produce detailed reports
What you need for this Electronics Test Technician Role based in Glasgow:
HNC/HND in Electronic Engineering or equivalent experience
Strong practical electronics knowledge with hands-on troubleshooting skills
Experience using electronic test equipment (oscilloscope, multimeter, PSU, function generator, etc.)
Skilled with soldering tools, hand tools, and basic workshop equipment
Excellent attention to detail, communication and analytical capability
My client is unable to offer a sponsorship, so UK working rights needed, you will need to be able to pass Baseline Security Clearance.
APPLY NOW: Please send your CV to KGraveney@redlinegroup.Com or if you have any questions regarding the role please call on 01582878817 or 07961158774.
Please send your CV prior to calling. ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £25000 - £30000 per annum
Posted: 2025-12-15 09:18:37
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-14 22:09:01
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-14 22:08:27
-
£44,000 starting, Overtime paid at 150%, Door to Door payments, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits Wellness programme, Ongoing training and developmentThe Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs.This role will be covering the North of England (Excluding Scotland) and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etcIf you have experience as an Heavy Goods Engineer, PSV Technician/Bus Mechanic, or Heavy Plant Fitter, we would be very keen to speak with you.Key Responsibilities of the HGV Technician
Carry out diagnostic analysis, repairs and preventative maintenance.
Deliver customer-facing product support with a professional approach.
Complete PDI inspections to ensure vehicles meet required standards.
Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies.
Complete all required paperwork accurately - including engineer reports, inspections, calibration checks and job sheets.
Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment.
Experience & Requirements for our HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools.
Direct HGV Technician experience
Hands-on experience working with HGVs and specialist vehicles.
Competent with mechanical, hydraulic, pneumatic and electrical systems.
Full UK Driving Licence
City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous
If you are interested in this Mobile HGV Technician role, please apply now or contact Grace at E3 Recruitment ....Read more...
Type: Permanent Location: Stockton-on-Tees, England
Start: ASAP
Salary / Rate: £44000.00 - £54000.00 per annum
Posted: 2025-12-14 10:00:04
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $30/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Maintenance Technician will be to keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs. Typical tasks for this position include (but are not limited to) the following: Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Follow checklists to inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install or repair wiring, electrical and electronic components, pipe systems, machinery, and equipment. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-13 22:07:59
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $30/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Maintenance Technician will be to keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs. Typical tasks for this position include (but are not limited to) the following: Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Follow checklists to inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install or repair wiring, electrical and electronic components, pipe systems, machinery, and equipment. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-13 22:07:36
-
Senior Test Development Engineer
Location: Livingston, Scotland
This is a senior engineering role with excellent career progression opportunities within a leading electronics manufacturing environment.
Key Responsibilities of this Senior Test Development Engineer, Livingston job are:
Test Solution Design & Development - Design, develop, and verify test solutions for electronic products, ensuring robust and efficient testing processes.
High-Level Assembly Testing - Create and implement test systems to evaluate the performance and signal output of electronic boards using advanced instrumentation.
Signal Analysis - Identify and analyse signal types and characteristics to ensure accurate test coverage and reliable performance validation.
Hardware & Mechanical Development - Support the development of basic electronic boards and assist with the design and assembly of mechanical enclosures.
Software & Automation Tools - Utilise LabVIEW and TestStand to develop, debug, and verify automated test sequences and scripts.
Instrumentation & Measurement - Integrate instrumentation for measurement, calibration, and validation of electronic devices under test.
Documentation - Produce clear and comprehensive test specifications and related engineering documentation.
Key Requirements of this Senior Test Development Engineer job, Livingston are:
Proven experience in electronics test development, including the design and implementation of automated test systems.
Strong hands-on knowledge of electronic circuits, components, and board-level schematics.
Practical experience using LabVIEW and TestStand for test sequence development, debugging, and verification.
Solid background in electronics design or product development, with the ability to understand and influence design for testability.
Excellent analytical and problem-solving skills, with a methodical and detail-oriented engineering approach.
Must be a British national (due to project security requirements).
To apply for this Senior Test Development Engineer - Electronics Manufacturing role in Livingston, Scotland, please send your CV to NDrain@redlinegroup.Com Or call 07961 158786. ....Read more...
Type: Permanent Location: Scotland
Start: ASAP
Salary / Rate: £45000 - £80000 per annum
Posted: 2025-12-13 00:00:04
-
Robotics Software Engineer - C++/ROS2
Are you an experienced Robotics Software Engineer with a strong background in ROS2, C++? Are you based in the Cambridge area, or keen to join one of the UK's leading hubs for robotics and technology innovation?
If so, our client an innovative “tech for good” start-up - is seeking a Robotics Software Engineer to join their growing R&D team in Cambridge, supporting projects across the UK and EU.
Key Responsibilities:
Design, develop, and integrate ROS2-based software for advanced robotic systems.
Collaborate with cross-functional teams (electronics, mechatronics, AI/research) in an Agile environment.
Implement, test, and debug real-time robotic applications on Linux platforms.
Deploy and validate robotics software on physical hardware, including field testing.
Required Skills & Experience:
Degree or Master's in Software Engineering, Computer Science, Robotics, or a related discipline.
Proven experience with modern C++ (C++14 or later)
Hands-on expertise with ROS2 (Robot Operating System 2).
Experience integrating software with embedded or edge computing hardware (e.G.
NVIDIA Jetson/Xavier).
Exposure to ROS1 migration, simulation tools (e.G.
Gazebo, RViz), and project tracking tools such as Jira.
This role offers a competitive salary, benefits package, and opportunities for career progression and profit share within a pioneering robotics company driving real-world impact.
To apply for the Robotics Software Engineer - C++/ROS2 (Linux) role, please send your CV to NDrain@redlinegroup.Com Or call 01582 878828 / 07487 756328. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £45000 - £70000 per annum
Posted: 2025-12-13 00:00:04
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
ASSOCIATE PRODUCT MANAGER
GENERAL PURPOSE OF THE JOB:
The Associate Product Manager plays an active role in the planning, organization, and management of an assigned product or product line(s) from conceptual stages through product life cycles to optimize profit and meet marketing, financial, and corporate growth objectives by performing the following duties under the direct supervision of the Director of Product Management or Sr.
Product Manager.
This critical, hands-on position is integral to the day-to-day tactical operations and strategic growth of the product line and collaborates with a wide variety of functional areas such as sales, engineering, R&D, marketing, manufacturing, and operations to develop and provide product definitions responsive to customer needs and market opportunities.
ESSENTIAL DUTIES AND RESPONSIBILITIES: MARKET INTELLIGENCE Responsible (with guidance) for the following: Conducting customer interviews and surveys Competitive investigations and analysis Trade organization participation LIFECYCLE MANAGEMENT Responsible (with guidance) for the following: Field and sales support Participate in the following: SKU and product structure management Forecasting Market analysis Reviewing warranty exceptions Evaluation of testing requirements NEW PRODUCT DEVELOPMENT Participate in the following: Creating product charters Managing the product development process Orchestrating product launches STRATEGY DEVELOPMENT Participate in the following: Product pricing strategies Prioritizing new product initiatives Product portfolio pricing strategies Identifying growth opportunities within product segments
EDUCATION:
Bachelor's Degree in Business, Marketing, Engineering, Science or related field plus three to six months of related experience and/or training such as internships.
EXPERIENCE:
One to two years' related experience and/or training preferred; Product Management intern experience may be a substitute
SKILLS AND ABILITIES:
Ability to grasp technical details Strong organizational skills Ability to understand relationships and connections and generate charts, graphs, spreadsheets and written summaries. Excellent written and oral communication skills Ability to take direction well Able to travel Proficiency in MS Word, MS Excel and MS PowerPoint.
CAD and/or SAP experience is a plus.
Ability to manage multiple priorities, effective team player, self-motivated, quick learner.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-12 22:09:09
-
Electrical Engineering Manager - Automated Machinery
Location: Essex (Hybrid 3 days on site)
Salary: Up to £75k + Bonus & Benefits
Sector: Manufacturing Equipment
Redline Group is partnered with a global leader in automated machine systems as they search for Electrical Engineering Manager to lead their UK-based electrical engineering team.
The business develops cutting-edge equipment for high-tech industries such as electronics, aerospace, automotive, energy, medical, and lighting.
Based at the manufacturing site in Essex on a hybrid basis, this is a high-impact, senior role ideal for an experienced engineering leader looking to combine technical expertise with people management in a dynamic, collaborative environment.
As Electrical Engineering Manager you will:
Lead, mentor, and develop a team of electrical engineers, fostering innovation and collaboration.
Oversee the design, development, testing, and validation of electrical systems and components.
Manage project timelines, budgets, and resource allocation to ensure successful delivery.
Work cross-functionally with mechanical, software, manufacturing, and product teams.
Ensure compliance with industry standards, safety regulations, and quality protocols.
Drive adoption of best practices in circuit design, PCB layout, power systems, and embedded systems.
Evaluate and implement new tools, technologies, and processes to enhance efficiency.
Support recruitment, onboarding, and performance management of engineering staff.
Skills & Experience
Bachelor's or Master's degree in Electrical Engineering or related field.
Strong experience in electrical engineering, including at least 3 years in a leadership role.
Proven track record delivering complex electrical systems or products.
Strong knowledge of analogue/digital circuit design, power electronics, and embedded systems.
Experience with CAD tools (e.G., Altium, Autodesk Inventor).
Familiarity with regulatory standards (UL, CE, Semi).
Excellent leadership, communication, and project management skills.
Package & Benefits
Flexible working arrangements.
Company healthcare scheme
Enhanced employer pension plan
25 days annual leave plus public holidays.
Opportunities for career growth and professional development.
If this sounds like an interesting next step for your career then please apply by sending your CV to yskelton@redlinegroup.Com or call 01582 878 829 if you have any questions. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £65000 - £75000 per annum
Posted: 2025-12-12 16:06:39
-
An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for an Electrical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio.
This Gloucestershire based, dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years.
With continued investment in products, infrastructure and most importantly, its people, this is a fantastic opportunity to join a forward-thinking engineering function that prides itself on being entrepreneurial, customer-focused, competitive and operationally best-in-class.
As an Electrical Design Engineer here, you will take responsibility for electrical design activities across the product lifecycle, from early-stage concepts all the way through to production release.
This will include control panel design, PLC integration and ensuring that all electrical systems meet stringent safety, quality and compliance requirements.
This is a crucial role in delivering robust and manufacturable engineering solutions working as part of a multi-disciplinary team.
Key responsibilities for the role of Electrical Design Engineer based in Gloucestershire:
Leading the electrical design of packaged pumping systems, including control panel layouts, schematic diagrams and cable schedules.
Researching and developing new product concepts while enhancing existing designs in response to customer, production and market feedback.
Specifying and selecting electrical components to meet performance, safety and compliance requirements.
Development and integration of PLC-based control systems including configuration, I/O definition and functional documentation (PLC programming experience would be useful but is not essential).
Producing and maintaining detailed electrical documentation including wiring diagrams, design calculations and BOMs.
Ensuring that all electrical designs comply with CE/UKCA requirements, Health & Safety regulations and relevant UK/EU directives (LVD, EMC, Machinery Directive).
Supporting EMC compliance through best-practice design and collaboration with external test facilities.
Collaborating with Mechanical Design, Compliance and Manufacturing teams to ensure design integrity and manufacturability.
Providing input into design reviews, risk assessments and verification/validation testing throughout the development lifecycle.
Key skills required for Gloucestershire based role of Electrical Design Engineer:
Degree or equivalent in Electrical or Electronic Engineering.
Proven experience in product design or development, (specific experience involving water management / fluid-handling equipment would be ideal but is not a pre-requisite).
Experience of working within R&D or New Product Development environments.
Proven experience of designing industrial/commercial control panels (a working knowledge of PLC-based control systems and Variable Speed Drives would be an advantage but is not a pre-requisite)
Solid experience in using CAD/schematic design software, experience of SolidWorks Electrical would be ideal but experience of EPLAN, or AutoCAD Electrical will also be considered.
Familiarity with key standards and directives, including:
- Low Voltage Directive (LVD)
- EMC Directive
- Machinery Directive
- BS EN 60204-1 (Electrical Equipment of Machines)
- EN 60335
Working environment and opportunities:
Hybrid working arrangements with time split between the Gloucestershire based office, home and site
Opportunity to join a highly skilled, ambitious engineering team within a rapidly expanding market leader
Involvement in the full product lifecycle, contributing to innovative and technically challenging projects.
A culture that encourages development, continuous improvement and professional growth.
This is a great opportunity to join a forward-thinking engineering group with ambitious growth plans, a collaborative culture and a commitment to building the best place to work while helping shape the future of high-performance, compliant engineering solutions.
To apply please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868. ....Read more...
Type: Permanent Location: Gloucestershire, England
Start: ASAP
Salary / Rate: £55000 - £65000 per annum
Posted: 2025-12-12 14:35:44
-
Mechanical Design Engineer (NPD, Pumping Systems, Water Management / Fluid Technology)
An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for a Mechanical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio.
This Gloucestershire based dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years.
With growth comes investment, in products, infrastructure, and in people.
The group prides itself on being entrepreneurial, customer focused and operationally best-in-class, creating an exciting environment for engineers who want to innovate, develop and make an impact.
As a Mechanical Design Engineer, you will play a key role in developing new products and enhancing existing designs, ensuring that solutions are technically robust, manufacturable and fully compliant.
Working across the full product development lifecycle; from initial research and concept generation through to prototyping, testing and production release.
Key responsibilities for the role of Mechanical Design Engineer, based in Gloucestershire:
Researching and developing new product concept as well as improving existing designs based on customer, production and market feedback.
Creating and maintaining 3D CAD models, 2D drawings, BOMs and engineering documentation using Solidworks within a PDM managed environment.
Applying DFM/DFA principles and ensuring compliance with relevant industry safety standards and regulations.
Performing Finite Element Analysis (FEA) using Solidworks Simulation.
Support of prototyping, testing and validation activities, analysing results to drive design iterations.
Collaborating with Product Management, Production, Quality and Supply Chain teams.
Participating in design reviews, risk assessments (including FMEA), and broader project lifecycle activities from concept all the way through to production release.
Maintaining accurate engineering data and version control within Solidworks PDM.
Key skills required for the role of the Gloucestershire based Mechanical Design Engineer:
HND or Degree in Mechanical Engineering, Product Design Engineering or a related discipline.
Demonstrable experience in product design or development, ideally involving fluid-handling / water management / pump systems / pressurisation units technology.
Experience of working within R&D or New Product Development (NPD) environments.
Industry experience of pumping systems, pipework design, fabrication design or water management / fluid technology.
Proficiency in Solidworks 3D CAD and PDM systems (Solidworks PDM preferred).
Experience with FEA tools and analysis methods.
Knowledge of DFMA, GD&T and prototyping/testing processes.
An understanding of compliance requirements, industry safety standards and sustainable product design.
Working environment and opportunities:
Hybrid working with time split between home, office and site as required.
Join a highly skilled, ambitious and supportive engineering team within an industry-leading group.
Contribute to the development of innovative, high-performing products used across multiple sectors.
This role offers a unique chance to become part of a forward-thinking engineering group with big ambitions, a collaborative culture, and a commitment to investing in its people.
To apply please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868. ....Read more...
Type: Permanent Location: Gloucestershire, England
Start: ASAP
Salary / Rate: £45000 - £50000 per annum
Posted: 2025-12-12 14:32:48
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
ASSOCIATE PRODUCT MANAGER
GENERAL PURPOSE OF THE JOB:
The Associate Product Manager plays an active role in the planning, organization, and management of an assigned product or product line(s) from conceptual stages through product life cycles to optimize profit and meet marketing, financial, and corporate growth objectives by performing the following duties under the direct supervision of the Director of Product Management or Sr.
Product Manager.
This critical, hands-on position is integral to the day-to-day tactical operations and strategic growth of the product line and collaborates with a wide variety of functional areas such as sales, engineering, R&D, marketing, manufacturing, and operations to develop and provide product definitions responsive to customer needs and market opportunities.
ESSENTIAL DUTIES AND RESPONSIBILITIES: MARKET INTELLIGENCE Responsible (with guidance) for the following: Conducting customer interviews and surveys Competitive investigations and analysis Trade organization participation LIFECYCLE MANAGEMENT Responsible (with guidance) for the following: Field and sales support Participate in the following: SKU and product structure management Forecasting Market analysis Reviewing warranty exceptions Evaluation of testing requirements NEW PRODUCT DEVELOPMENT Participate in the following: Creating product charters Managing the product development process Orchestrating product launches STRATEGY DEVELOPMENT Participate in the following: Product pricing strategies Prioritizing new product initiatives Product portfolio pricing strategies Identifying growth opportunities within product segments
EDUCATION:
Bachelor's Degree in Business, Marketing, Engineering, Science or related field plus three to six months of related experience and/or training such as internships.
EXPERIENCE:
One to two years' related experience and/or training preferred; Product Management intern experience may be a substitute
SKILLS AND ABILITIES:
Ability to grasp technical details Strong organizational skills Ability to understand relationships and connections and generate charts, graphs, spreadsheets and written summaries. Excellent written and oral communication skills Ability to take direction well Able to travel Proficiency in MS Word, MS Excel and MS PowerPoint.
CAD and/or SAP experience is a plus.
Ability to manage multiple priorities, effective team player, self-motivated, quick learner.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-12 14:09:48
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Performs visual and physical inspection, sampling, testing, and control of parts, products, and raw materials to conform to established specifications, applicable standards, and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015, and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Inspects, calibrates, and supervises the use of various instrumentation for testing.
Performs data analysis and provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor, and Quality Assurance Manager on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in troubleshooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
High school diploma or general education degree (GED).
EXPERIENCE REQUIREMENT:
A minimum of 1-2 years of experience in a quality control role within a manufacturing environment with oversight of both raw materials and finished goods.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite.
Previous experience using enterprise software such as SPA is preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $19.57 and $23.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-12-12 14:09:42
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Performs visual and physical inspection, sampling, testing, and control of parts, products, and raw materials to conform to established specifications, applicable standards, and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015, and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Inspects, calibrates, and supervises the use of various instrumentation for testing.
Performs data analysis and provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor, and Quality Assurance Manager on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in troubleshooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
High school diploma or general education degree (GED).
EXPERIENCE REQUIREMENT:
A minimum of 1-2 years of experience in a quality control role within a manufacturing environment with oversight of both raw materials and finished goods.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite.
Previous experience using enterprise software such as SPA is preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $19.57 and $23.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-12-12 14:09:12
-
SAP HCM Payroll Support - Payroll - Birmingham
Hybrid working
Salary up to £60,000
SAP HR & Payroll Support Analyst required for a leading client based in Birmingham.
My client is currently seeking a SAP HR & Payroll Support Analyst to come on board to deliver crucial support for our HR and Payroll systems, this role is dedicated to maintaining, troubleshooting, and enhancing SAP HR and Payroll features to guarantee smooth payroll processing and efficient HR operations.
You will collaborate closely with business stakeholders, IT teams, and external vendors to resolve issues, optimize system performance, and contribute to key HR and Payroll projects.
Key skills and responsibilities,
, SAP Support experience
, Required experience in SAP HR Payroll, with practical skills in troubleshooting and configuration.
, Extensive SAP configuration knowledge, including payroll schemas, PCRs, and wage type setup.
, Proven track record in supporting Payroll operations and SAP Time & Attendance.
, Understanding of SAP HR master data and employee lifecycle management.
, Experience with SAP system upgrades, applying patches, and utilizing testing methodologies.
, Experience with SAP SuccessFactors.
, Familiarity with SAP S/4HANA HR & Payroll.
, Proficiency in SAP Fiori Apps, with an understanding of modern SAP user interfaces for HR & Payroll functions.
, Knowledge of GDPR and Data Security Regulations to ensure compliance when managing sensitive payroll and HR data.
, Experience with HR Shared Services.
, Capability to create functional specifications for ABAP development.
, Proficiency in SAP Query and Reporting Tools (e.g., Ad Hoc Query, SAP HCM).
, Understanding of third-party payroll integrations, including interfaces with tax authorities, benefits providers, and time management solutions.
Interested? Please submit your updated CV to Dean Sadler-Parkes at Crimson for immediate consideration.
Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers!
Crimson is acting as an employment agency regarding this vacancy ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-12-12 11:02:17
