-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-12-15 23:19:55
-
Graduate Engineer
London - Opportunity for Germany!
£38,000 - £40,000 + Travel Allowance + Accommodation + Pension + Holidays + Private Medical Insurance + Technical Career Progression + Package + 'Immediate Start'
Are you a recent engineering graduate looking to launch your career with a leading main contractor delivering high-tech technical construction projects across the UK and Europe? This is your chance to gain hands-on experience and take on a pivotal role in some of the most advanced data center projects in the industry.
Are you ready to fast-track your career and make an impact on a global scale? Joining the data center industry means:
Rapid career progression: You will be equipped with the skills to lead sooner than you think.
Cutting-edge technical expertise: Work with advanced technology that powers AI, cloud computing, and the digital world.
Worldwide opportunities: Be part of a global network with placements across the world (Europe + America).
With your first-class degree and ambition, you'll thrive in an industry where innovation meets opportunity.
Build a career that's dynamic, challenging, and impactful!
This is an exciting opportunity to work with a specialist contractor known for delivering complex, high-value projects across the UK and Europe.
You'll be at the forefront of cutting-edge digital infrastructure, managing multimillion-pound schemes and ensuring seamless execution from planning to completion.
Be part of a dynamic environment where you can progress your skillset and career.
Your Role as a Graduate Engineer Will Include:
Assisting in the planning, coordination, and execution of data center projects.
Working closely with subcontractors, suppliers, and on-site teams to maintain project efficiency and safety compliance.
Developing key skills in project coordination
As a Graduate Engineer, You Will Have:
A degree in Mechanical, Electrical, or Building Services Engineering.
A proactive attitude with a strong work ethic and eagerness to learn.
The ambition to progress within a main contractor, with structured career development opportunities.
EU Passport - travel to countries in Europe + Drivers Licence
Ready to take the next step? Any questions ask Dea Totaj on 07458163032.
Keywords: Graduate Engineer , Junior Engineer, Trainee Engineer, UK, London, Birmingham, Manchester, Glasgow, Edinburgh, Liverpool, Leeds, Bristol, Sheffield, Newcastle, Nottingham, Leicester, Coventry, Southampton, Cardiff, Belfast, Aberdeen, Portsmouth, Derby, Wolverhampton, Loughborough University, Trinity College Dublin, Imperial College London, Durham University, University of Sheffield, University of Warwick, University of Cambridge, University of Oxford, University of Manchester, University of Bristol. ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Salary / Rate: £38000 - £40000 per annum + + Training + Progression
Posted: 2025-12-15 20:48:15
-
This is an exciting opportunity to apply for a Project Manager role with a long-established manufacturer.
This company has a global footprint with quality at the forefront of everything they design and manufacture.
With a growing order book, diversification into new markets, and obtaining new industry recognised accreditations, this role is perfect for an experienced engineering professional looking for a new challenge, with the potential for progression and career development.
This workplace is easily commutable from Huddersfield, Wakefield, Barnsley, Leeds, Bradford, Halifax and Brighouse.
As a Project Manager, you will be responsible for:
Planning, monitoring, and managing full project life cycles in line with company procedures and agreed customer requirements; Ensuring scope, budget, schedule, quality, and benefits are achieved.
Ensure all design, procurement, fabrication, technical assembly, packing, shipping, installation and commissioning, activities are correctly managed.
Oversee the control of related finances, such as purchasing strategy, management of any contract changes and resulting additional expenditure.
Along with seeking and identifying opportunities for cost savings through innovation and the application of best practice.
Leading review meetings and producing and issuing regular monthly reports detailing project performance.
Identifying, evaluating, and communicating all technical, commercial, and business risks.
Finalising projects and successfully handing over to the customer, and producing project closure reports.
For the Project Manager role, we are keen to receive applications from individuals who possess:
A Mechanical Engineering qualification.
Project Management certification such as PRINCE2, APM (Association for Project Managers) qualification, PMI (Project Management Institute) certification, Lean & Six Sigma.
Project Manager experience within the manufacturing and engineering environment.
Track record of delivering projects on time and in full, according to budget, time, and performance measures.
Ability to be comfortable with consistent and regular customer communication.
Open to planned international travel within the role
What are the benefits of this Project Manager position?
Annual Salary: £45,000 - £55,000 depending on experience
Flexible working hours
Permanent full time contract, working Monday-Friday on site
24 days holiday entitlement (in addition to public holidays)
Employer pension contributions
Health care plan
To apply for the Project Manager position, please click “Apply Now” and attach a copy of your updated CV.
Alternatively, please contact Adelle Taylor at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £45000 - £55000.00 per annum + Pension, Private Healthcare
Posted: 2025-12-15 15:42:10
-
A fantastic new job opportunity has arisen for a committed Staff Nurse to work in an exceptional dialysis clinic based in the West Byfleet, Surrey area.
You will be working for one of UK's leading healthcare providers
This dialysis clinic delivers the highest level of care in state-of-the-art clinics with the most technologically advanced equipment
*
*To be considered for this position you must be qualified as an RGN Nurse with a current active NMC Pin
*
*
As a Nurse your key duties include:
Deliver a high standard of individualised care whilst promoting patient-focused care
Mentor and assist team members
Provide safe haemodialysis treatment in line with patient prescription
Work collaboratively within a multidisciplinary team, and with external organisations and hospital trusts
Promote and demonstrate effective communication at all times with patients, users and providers to the service
Adhere to company procedures, guidelines and policies and assist in implementation and review
Continuously develop knowledge and skills relevant to delivering a high standard of care to patients
Demonstrate a commitment to evidence-based practice and assist in the evaluation of evidence to improve and develop patient care
The following skills and experience would be preferred and beneficial for the role:
Experience in renal nursing is preferred
Good communication skills
Good knowledge of current professional nursing issues
Ability to adapt to change within the working situation
Good interpersonal skills, friendly and outgoing, flexible
Able to work effectively within a team
The successful Nurse will receive an excellent salary of £30,000 - £35,000 per annum DOE.
This exciting position is a permanent full time role working on day shifts from Monday-Saturdays.
In return for your hard work and commitment you will receive the following generous benefits:
35 days' paid leave per annum, including bank holidays
Flexible timings
Flexible contracts
Discounts, vouchers, pension + much more!!
Reference ID: 7153
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Type: Permanent Location: West Byfleet, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £35000 per annum
Posted: 2025-12-15 14:14:13
-
A fantastic new job opportunity has arisen for a committed Staff Nurse to work in an exceptional dialysis clinic based in the Sutton, London area.
You will be working for one of UK's leading healthcare providers
This dialysis clinic delivers the highest level of care in state-of-the-art clinics with the most technologically advanced equipment
*
*To be considered for this position you must be qualified as a Registered Nurse with a current active NMC Pin
*
*
As a Nurse your key duties include:
Deliver a high standard of individualised care whilst promoting patient-focused care
Mentor and assist team members
Provide safe haemodialysis treatment in line with patient prescription
Work collaboratively within a multidisciplinary team, and with external organisations and hospital trusts
Promote and demonstrate effective communication at all times with patients, users and providers to the service
Adhere to company procedures, guidelines and policies and assist in implementation and review
Continuously develop knowledge and skills relevant to delivering a high standard of care to patients
Demonstrate a commitment to evidence-based practice and assist in the evaluation of evidence to improve and develop patient care
The following skills and experience would be preferred and beneficial for the role:
Experience in renal nursing is preferred
Good communication skills
Good knowledge of current professional nursing issues
Ability to adapt to change within the working situation
Good interpersonal skills, friendly and outgoing, flexible
Able to work effectively within a team
The successful Nurse will receive an excellent salary of £30,000 - £35,000 per annum DOE.
This exciting position is a permanent full time role working on day shifts from Monday-Saturdays.
In return for your hard work and commitment you will receive the following generous benefits:
35 days' paid leave per annum, including bank holidays
Flexible timings
Flexible contracts
Full training + much more!!
Reference ID: 6774
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Type: Permanent Location: Sutton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £35000 per annum
Posted: 2025-12-15 14:06:31
-
An opportunity for a Graduate Control Engineer to join a leading Chemical Manufacturing company in Manchester, offering a salary of up to £35,000 per year DOE.
This Monday to Friday, days-based role comes with a range of benefits, including a bonus structure, additional leave, company pension, flexitime, Hybrid working and various other incentives.As a Graduate Control Engineer, you will work closely with the senior team in been responsible for maintaining, upgrading, and optimising systems at the company's manufacturing sites in Manchester and remotely at a site in Europe.
This role focuses on ensuring the reliability, efficiency, and safety of automation with a particular emphasis on Siemens PCS7 DCS.You will support in troubleshoot system issues, implement system enhancements, and collaborate closely with contractors and internal teams to deliver advanced solutions.
Your contributions will directly impact production performance, minimise downtime, and ensure compliance with operational and safety standards.Graduate Control Engineer Responsibilities
Oversee the design, operation, and maintenance of systems.
Lead the design, implementation, and testing of system changes for equipment upgrades, capacity expansion, new product introductions, and process improvements.
Provide troubleshooting and technical support to Operations and field technicians.
Conduct system analysis, improvement studies, front-end design, and collaborate with contractors and consultants on designs.
Develop, maintain, and optimise system implementations, including creating and updating operation and maintenance procedures.
To be considered for this Graduate Controls Engineer position, the ideal candidate should have a degree or equivalent qualification in a relevant engineering discipline, along with 1-2 years of proven experience in maintaining systems within a production environment.
Previous experience with the Siemens PCS7 DCS platform is preferred but not essential.
Please apply direct for further information regarding this Graduate Control Engineer opportunity. ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: £30000.00 - £35000.00 per annum + DOE - Plus Benefits
Posted: 2025-12-15 13:52:47
-
Seeking a skilled Senior Test Engineer with expertise in space propulsion.
Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £45000 Per Annum None
Posted: 2025-12-15 10:59:57
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-14 22:09:01
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-12-14 22:08:48
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-12-14 22:08:47
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The General Services (GS) Field Estimator is responsible for delivering accurate, timely, and comprehensive estimating services for patch-and-repair proposals within their assigned region.
This role plays a critical part in supporting sales and operations by ensuring estimates are well-developed, cost-effective, and aligned with project requirements. The Field Estimator conducts assessments of existing building envelope and roofing conditions based on Sales Representative scopes of work, visual inspections, and documented deficiencies.
Leveraging these findings, the Estimator develops detailed scopes of work, prepares budgets and estimates, and produces professional proposals for roof repairs, façade repairs, and roof renovations. In addition, the Field Estimator serves as a key liaison to field teams, effectively communicating project scope and expectations to foremen and technicians through both verbal and written means.
Other essential responsibilities include attending pre-bid meetings, capturing accurate field measurements, and providing thorough photo documentation to support proposals and planning.
The role requires strong attention to detail, a collaborative mindset, and the ability to balance multiple priorities in a fast-paced environment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate the Quality Control (QC) process in partnership with the Quality Control Specialist (QCS) for all Field Representatives in the region.
This includes conducting random site visits on current and past projects, documenting findings, and ensuring that work meets company standards and customer satisfaction requirements. Investigate roof and building envelope conditions to support the development of General Services (GS) estimates and proposals for Sales Representatives, providing alternative solutions when appropriate. Serve as a technical resource with expertise in roofing systems. Perform detailed take-offs from construction documents to support accurate proposals. Travel to project sites as needed for proposal development and validation. Collaborate with Tremco Sales Representatives, WTI Field personnel, and WTI Construction Managers to align project scope and cost requirements. Provide RoofSnap labor details as needed to Construction Managers and General Contracting Estimators to support Labor, Installation, and Productivity (LIP) preparation for proposals. Prepare detailed and accurate estimates by reviewing Sales Representative scopes of work, project plans, specifications, and addenda, identifying labor, material, and time requirements. Identify and contact suppliers and subcontractors as needed for inclusion in estimates. Ensure suppliers and subcontractors without Master Service Agreements (MSAs) are referred to the Divisional Administrator for approval, documenting exceptions or refusals to avoid procurement delays. Conduct thorough take-offs for roofing repairs and renovations, ensuring a comprehensive understanding of the project scope. Assemble and present estimates with precision, incorporating both numerical data and precise descriptive details. Maintain professional and timely communication with customers, Sales Representatives, field staff, and internal company personnel via email, phone, text, or in person. Assist in the training and development of Field Representatives and "Elevate" program candidates and graduates, in alignment with WTI Training Policy.
Training includes: Proper completion of services and related documentation. Safety training and documentation requirements. Certification and approval of Field Representatives, including OSHA Hazard Awareness and Toolbox Talks. Conduct Platinum Inspections, in conjunction with the Inspection Team, to prepare associated cost estimate proposals. Demonstrate comprehensive knowledge of WTI services and deliverables. Participate in all required calls, meetings, and organizational communications. Perform other duties or special projects as assigned by the Regional Business Manager (RBM) or GS Supervisor.
CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications: Prior supervisory skills and ability to manage people and tasks. Prior roofing experience, including patch and repair skills. Knowledge of Project Management, planning, and scheduling.
Knowledge and experience monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge. Understanding of budgeting and expense management.
Competencies: Adaptable and willing to change with business needs. Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements: Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
Strong verbal and written communication skills. Ability to work independently, follow through on assignments with minimal direction, set priorities that accurately reflect the relative importance of job responsibilities, and perform under deadlines with frequent interruptions. Ability to use estimating software, advanced take-off tools, and other computer programs. Apply for this ad Online! ....Read more...
Type: Permanent Location: Rochester, Minnesota
Posted: 2025-12-14 22:08:44
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-12-14 22:08:34
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The 3rd Shift Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g., Hot Work, LOTO, and line breaking).
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure.
Implement the needed preventative measures, including optimization of the PM program.
Ensure reliable operation of facility support processes and utilities (i.e., HVAC, Air Compressors, Tow motors, Hot Oil Heaters, and chiller systems).
Diagnose/Troubleshoot, repair/replace, and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, and lighting) and components (e.g.
sensors, switches, valves, PLCs, and control wiring), and mechanical systems (e.g.
product vessels/reactors, pumps) and components.
Investigate equipment/process failures and difficulties to diagnose and troubleshoot faulty operation.
Assist the Maintenance Supervisor in arranging and coordinating contractors, safety permits, and tasks to support facility and process maintenance/repairs.
Serve, as needed, on process hazard analysis (PHA) teams/sessions.
EDUCATION AND EXPERIENCE:
One-year certificate from college or technical school.
Maintenance Mechanic Certificate or equivalent as deemed by the company.
Industrial Technology program graduate preferred.
Two to four years related experience and/or training.
Experience in LEAN manufacturing.
Military mechanical experience is a plus.
Experience in chemical/coating processing & production preferred.
Experience in dispensing operations preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Journeyman cards in various disciplines are preferred.
Ability to work overtime as needed.
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner.
Excellent communication skills with the ability to read, write, and communicate fluently in English.
Scope of experience: Electrical, Mechanical, HVAC, Welding.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-14 22:08:34
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-12-14 22:08:34
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-14 22:08:27
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The General Services (GS) Field Estimator is responsible for delivering accurate, timely, and comprehensive estimating services for patch-and-repair proposals within their assigned region.
This role plays a critical part in supporting sales and operations by ensuring estimates are well-developed, cost-effective, and aligned with project requirements. The Field Estimator conducts assessments of existing building envelope and roofing conditions based on Sales Representative scopes of work, visual inspections, and documented deficiencies.
Leveraging these findings, the Estimator develops detailed scopes of work, prepares budgets and estimates, and produces professional proposals for roof repairs, façade repairs, and roof renovations. In addition, the Field Estimator serves as a key liaison to field teams, effectively communicating project scope and expectations to foremen and technicians through both verbal and written means.
Other essential responsibilities include attending pre-bid meetings, capturing accurate field measurements, and providing thorough photo documentation to support proposals and planning.
The role requires strong attention to detail, a collaborative mindset, and the ability to balance multiple priorities in a fast-paced environment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate the Quality Control (QC) process in partnership with the Quality Control Specialist (QCS) for all Field Representatives in the region.
This includes conducting random site visits on current and past projects, documenting findings, and ensuring that work meets company standards and customer satisfaction requirements. Investigate roof and building envelope conditions to support the development of General Services (GS) estimates and proposals for Sales Representatives, providing alternative solutions when appropriate. Serve as a technical resource with expertise in roofing systems. Perform detailed take-offs from construction documents to support accurate proposals. Travel to project sites as needed for proposal development and validation. Collaborate with Tremco Sales Representatives, WTI Field personnel, and WTI Construction Managers to align project scope and cost requirements. Provide RoofSnap labor details as needed to Construction Managers and General Contracting Estimators to support Labor, Installation, and Productivity (LIP) preparation for proposals. Prepare detailed and accurate estimates by reviewing Sales Representative scopes of work, project plans, specifications, and addenda, identifying labor, material, and time requirements. Identify and contact suppliers and subcontractors as needed for inclusion in estimates. Ensure suppliers and subcontractors without Master Service Agreements (MSAs) are referred to the Divisional Administrator for approval, documenting exceptions or refusals to avoid procurement delays. Conduct thorough take-offs for roofing repairs and renovations, ensuring a comprehensive understanding of the project scope. Assemble and present estimates with precision, incorporating both numerical data and precise descriptive details. Maintain professional and timely communication with customers, Sales Representatives, field staff, and internal company personnel via email, phone, text, or in person. Assist in the training and development of Field Representatives and "Elevate" program candidates and graduates, in alignment with WTI Training Policy.
Training includes: Proper completion of services and related documentation. Safety training and documentation requirements. Certification and approval of Field Representatives, including OSHA Hazard Awareness and Toolbox Talks. Conduct Platinum Inspections, in conjunction with the Inspection Team, to prepare associated cost estimate proposals. Demonstrate comprehensive knowledge of WTI services and deliverables. Participate in all required calls, meetings, and organizational communications. Perform other duties or special projects as assigned by the Regional Business Manager (RBM) or GS Supervisor.
CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications: Prior supervisory skills and ability to manage people and tasks. Prior roofing experience, including patch and repair skills. Knowledge of Project Management, planning, and scheduling.
Knowledge and experience monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge. Understanding of budgeting and expense management.
Competencies: Adaptable and willing to change with business needs. Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements: Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
Strong verbal and written communication skills. Ability to work independently, follow through on assignments with minimal direction, set priorities that accurately reflect the relative importance of job responsibilities, and perform under deadlines with frequent interruptions. Ability to use estimating software, advanced take-off tools, and other computer programs. Apply for this ad Online! ....Read more...
Type: Permanent Location: Rochester, Minnesota
Posted: 2025-12-14 22:08:27
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The 3rd Shift Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g., Hot Work, LOTO, and line breaking).
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure.
Implement the needed preventative measures, including optimization of the PM program.
Ensure reliable operation of facility support processes and utilities (i.e., HVAC, Air Compressors, Tow motors, Hot Oil Heaters, and chiller systems).
Diagnose/Troubleshoot, repair/replace, and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, and lighting) and components (e.g.
sensors, switches, valves, PLCs, and control wiring), and mechanical systems (e.g.
product vessels/reactors, pumps) and components.
Investigate equipment/process failures and difficulties to diagnose and troubleshoot faulty operation.
Assist the Maintenance Supervisor in arranging and coordinating contractors, safety permits, and tasks to support facility and process maintenance/repairs.
Serve, as needed, on process hazard analysis (PHA) teams/sessions.
EDUCATION AND EXPERIENCE:
One-year certificate from college or technical school.
Maintenance Mechanic Certificate or equivalent as deemed by the company.
Industrial Technology program graduate preferred.
Two to four years related experience and/or training.
Experience in LEAN manufacturing.
Military mechanical experience is a plus.
Experience in chemical/coating processing & production preferred.
Experience in dispensing operations preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Journeyman cards in various disciplines are preferred.
Ability to work overtime as needed.
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner.
Excellent communication skills with the ability to read, write, and communicate fluently in English.
Scope of experience: Electrical, Mechanical, HVAC, Welding.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-12-14 22:08:24
-
JOB DESCRIPTION
Location: Vernon Hills, IL
Department: IT
Direct Reports/Manages others: No
Senior Systems Engineer, Cloud and Compute (for our Cloud and On-Prem Engineering and Operations team)
We're looking for a hands-on Senior Systems Engineer to join our high-performing Cloud and Compute engineering team at a multibillion-dollar global organization.
If you thrive in complex enterprise environments and enjoy solving technical challenges at scale, this is the role for you.
This position plays a key role in architecting, implementing, and optimizing our hybrid infrastructure, including Azure Cloud, VMware, Hyper-V, Storage and Windows Server platforms.
You'll drive forward key modernization initiatives such as:
Upgrading to Windows Server 2025
Migrating and building workloads in Azure as part of our cloud transformation journey
Modernizing and upgrading our ESXi infrastructure
And more exciting, high-impact projects across our global footprint
In this role, you'll contribute to the technical direction of application hosting, storage, virtualization, and disaster recovery.
You'll collaborate cross-functionally with teams across infrastructure, application development, networking and security to ensure scalable, secure, and high-performing solutions.
If you're passionate about infrastructure modernization, cloud adoption, and continuous improvement, and you bring deep technical expertise with a strategic mindset, we'd love to hear from you.
Responsibilities:
Design, optimize, and implement application hosting solutions in both Azure cloud and on-premise data centers that meet the demands of the business.
Evaluate the current and upcoming infrastructure stack from a security perspective and provide hardening recommendations.
Virtualization and Windows optimization & performance
Active Directory domain consolidations
Coordinates and supports information security efforts in server, virtualization and storage.
This includes working with application developers and database administrators to plan and implement application security within application environments.
Thus providing guidance on risks and vulnerabilities related to common application protocols, web services security, and end user systems.
Scripting and automation of application hosting and storage maintenance
Disaster and Site Recovery
Take part in life cycle management/ refresh of equipment
Systems management and alerting, which may include nonbusiness hours on-call support rotation as needed.
Collaborate with network services, software systems engineering and/or application development to restore service and/or identify problems
Assist with other facets of IT operations and projects as needed.
Qualifications:
10+ years in engineering role for application hosting for global entities with $3B+ in annual revenue.
10+ years with MS Server and Virtualization platforms (VMWare & MS Hypervisor)
10+ years with mass storage units (HP Storage, IBM storage, etc.)
10+ years with ITIL processes and industry best practices for application hosting
5+ years with Azure IaaS and PaaS experience
BS or MS in Computer Science or equivalent education.
Excellent oral and written communication
Strong problem-solving skills, attention to detail and the ability to work both independently and as part of a team.
Ability to manage and deliver multiple priorities in a timely fashion.
Ability to support cross-team collaboration to ensure your focus area integrates with the overall solutions.
Experience with IBM Power Systems and AS400 is a plus.
MCSE, Security, ITIL, and/or Azure certifications are a plus.
Salary: $145,000 - $170,000, bonus eligible
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2025-12-13 22:08:00
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Job Type: Full-time
Shift: Monday - Thursday 5:45AM - 4:15PM Friday: 2-3 hours on non-mandatory Fridays.
Pay: $24/hour
Work Location: In person
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-13 22:07:53
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Job Type: Full-time
Shift: Monday - Thursday 5:45AM - 4:15PM Friday: 2-3 hours on non-mandatory Fridays.
Pay: $24/hour
Work Location: In person
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-13 22:07:39
-
JOB DESCRIPTION
The Senior Financial Reporting Specialist is responsible for supporting the financial reporting and close processes of the Construction Products Group Segment of RPM.
The specialist will also play a role in supporting specific finance transformation initiatives.
This role assists in ensuring the accurate, timely and compliant preparation of financial statements in accordance with U.S.
GAAP, supporting RPM's SEC reporting requirements.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Financial Reporting, Close Management and Compliance
Actively participate in CPG's monthly, quarterly, and annual financial close processes to ensure timely, accurate, complete and compliant reporting of results in accordance with U.S.
GAAP and internal policies.
Conduct monthly financial statement reviews including analytical review and inquiries with divisional management to ensure completeness, accuracy and compliance with RPM policies.
Continuously identify actionable opportunities to improve the timeliness of the financial close, incorporating automation where appropriate.
Respond to inquiries from various functional areas as needed and assist in the preparation of required/requested reporting for management.
Possess a strong cost accounting background to provide a vital support role in the global costing initiatives.
Participate in continuous improvement activities such as performing walkthroughs of a particular reporting process, identifying areas for improvement and implementing the change through automation or transferring the process to the Global Service Center.
Maintain audit evidence and process documentation to support SOX compliance and internal control effectiveness and execute certain control activities (e.g., fluctuation analysis, profit in inventory review).
Keep current on new GAAP pronouncements and SEC regulations, understanding how the new rules can impact the Company.
Collaborate with cross-functional teams to streamline global reporting processes.
Special Projects and Reporting Initiatives
Execute special financial reporting projects, including company-wide finance transformation initiatives, following accounting guidance related to mergers & acquisitions, system implementations, organizational changes, new disclosure requirements and other significant transactions.
Support RPM and CPG on the Master Data Management Committee.
Assist in ensuring the integrity, consistency, and governance of finance-related master data (e.g., chart of accounts, cost centers, profit centers, trading partners) within the ERP and support process change related to master data management across the organization.
Play a key role in updating a new financial reporting framework within the global SAP application.
Ad hoc reporting, month end close duties and other special projects.
EDUCATION:
Bachelor's degree from four or 5-year college or university
EXPERIENCE:
More than 7 years related experience and/or training
CERTIFICATES, LICENSES, REGISTRATIONS:
CPA preferred, not required
OTHER SKILLS AND ABILITIES:
Solid understanding of US GAAP, knowledge of financial consolidations, eliminations, and segment reporting.
A high level of proficiency in the OneStream consolidation system, SAP General Ledger system and all Microsoft Office products is essential.
Excellent analytical aptitude with a proven ability to collect, maintain and analyze/interpret disparate data, including financial statements.
Well-organized, methodical thinker with excellent decision-making and creative problem-solving skills.
Self-starter, with strong organizational and time management skills and the ability to balance multiple priorities to meet tight deadlines.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-13 14:09:56
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Outside Sales Associate
Location: Charlotte, NC
If you are an ambitious, self-motivated individual with a proven record of effort driven success and are interested in an opportunity to join a highly successful growing sales team in the construction arena, this position may be the right fit for you.
Compensation and Benefits:
Base Salary with strong commission potential Full health benefits, 401k, pension plan Great support for training and guidance Opportunity for advancement Paid mileage, data plan, laptop provided, etc.
Preferred Qualifications:
Bachelor's Degree (BS) preferred. Recent college graduates and/or up to 1-4 years in sales. Former athletes encouraged to apply Must have a valid drivers' license Practical computer application literacy (including Microsoft Office Suite and learn internal business systems). Prior experience that demonstrates a strong work ethic and ability to multi-task. Must be willing to participate in the year-long training program. Self-motivated and great organizational skills. Goal oriented.
Job Functions:
As part of the program, you will be partnered with an experienced Traditional Sales Representative for a period of 18 - 24 months to assist you in your comprehensive, hands-on training.
If you are confident in your sales abilities, have a high degree of energy, and strong interpersonal and communication skills, we invite your inquiry of this position.
This position offers the start to a great career in the high-end building materials industry, focusing on commercial roofing. Travel within the assigned territory. The salary range for applicants in this position generally ranges between $60,000 and $80,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Charlotte, North Carolina
Posted: 2025-12-13 14:09:44
-
JOB DESCRIPTION
The Senior Financial Reporting Specialist is responsible for supporting the financial reporting and close processes of the Construction Products Group Segment of RPM.
The specialist will also play a role in supporting specific finance transformation initiatives.
This role assists in ensuring the accurate, timely and compliant preparation of financial statements in accordance with U.S.
GAAP, supporting RPM's SEC reporting requirements.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Financial Reporting, Close Management and Compliance
Actively participate in CPG's monthly, quarterly, and annual financial close processes to ensure timely, accurate, complete and compliant reporting of results in accordance with U.S.
GAAP and internal policies.
Conduct monthly financial statement reviews including analytical review and inquiries with divisional management to ensure completeness, accuracy and compliance with RPM policies.
Continuously identify actionable opportunities to improve the timeliness of the financial close, incorporating automation where appropriate.
Respond to inquiries from various functional areas as needed and assist in the preparation of required/requested reporting for management.
Possess a strong cost accounting background to provide a vital support role in the global costing initiatives.
Participate in continuous improvement activities such as performing walkthroughs of a particular reporting process, identifying areas for improvement and implementing the change through automation or transferring the process to the Global Service Center.
Maintain audit evidence and process documentation to support SOX compliance and internal control effectiveness and execute certain control activities (e.g., fluctuation analysis, profit in inventory review).
Keep current on new GAAP pronouncements and SEC regulations, understanding how the new rules can impact the Company.
Collaborate with cross-functional teams to streamline global reporting processes.
Special Projects and Reporting Initiatives
Execute special financial reporting projects, including company-wide finance transformation initiatives, following accounting guidance related to mergers & acquisitions, system implementations, organizational changes, new disclosure requirements and other significant transactions.
Support RPM and CPG on the Master Data Management Committee.
Assist in ensuring the integrity, consistency, and governance of finance-related master data (e.g., chart of accounts, cost centers, profit centers, trading partners) within the ERP and support process change related to master data management across the organization.
Play a key role in updating a new financial reporting framework within the global SAP application.
Ad hoc reporting, month end close duties and other special projects.
EDUCATION:
Bachelor's degree from four or 5-year college or university
EXPERIENCE:
More than 7 years related experience and/or training
CERTIFICATES, LICENSES, REGISTRATIONS:
CPA preferred, not required
OTHER SKILLS AND ABILITIES:
Solid understanding of US GAAP, knowledge of financial consolidations, eliminations, and segment reporting.
A high level of proficiency in the OneStream consolidation system, SAP General Ledger system and all Microsoft Office products is essential.
Excellent analytical aptitude with a proven ability to collect, maintain and analyze/interpret disparate data, including financial statements.
Well-organized, methodical thinker with excellent decision-making and creative problem-solving skills.
Self-starter, with strong organizational and time management skills and the ability to balance multiple priorities to meet tight deadlines.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-13 14:09:41
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Outside Sales Associate
Location: Charlotte, NC
If you are an ambitious, self-motivated individual with a proven record of effort driven success and are interested in an opportunity to join a highly successful growing sales team in the construction arena, this position may be the right fit for you.
Compensation and Benefits:
Base Salary with strong commission potential Full health benefits, 401k, pension plan Great support for training and guidance Opportunity for advancement Paid mileage, data plan, laptop provided, etc.
Preferred Qualifications:
Bachelor's Degree (BS) preferred. Recent college graduates and/or up to 1-4 years in sales. Former athletes encouraged to apply Must have a valid drivers' license Practical computer application literacy (including Microsoft Office Suite and learn internal business systems). Prior experience that demonstrates a strong work ethic and ability to multi-task. Must be willing to participate in the year-long training program. Self-motivated and great organizational skills. Goal oriented.
Job Functions:
As part of the program, you will be partnered with an experienced Traditional Sales Representative for a period of 18 - 24 months to assist you in your comprehensive, hands-on training.
If you are confident in your sales abilities, have a high degree of energy, and strong interpersonal and communication skills, we invite your inquiry of this position.
This position offers the start to a great career in the high-end building materials industry, focusing on commercial roofing. Travel within the assigned territory. The salary range for applicants in this position generally ranges between $60,000 and $80,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Charlotte, North Carolina
Posted: 2025-12-13 14:09:23
-
JOB DESCRIPTION
Location: Vernon Hills, IL
Department: IT
Direct Reports/Manages others: No
Senior Systems Engineer, Cloud and Compute (for our Cloud and On-Prem Engineering and Operations team)
We're looking for a hands-on Senior Systems Engineer to join our high-performing Cloud and Compute engineering team at a multibillion-dollar global organization.
If you thrive in complex enterprise environments and enjoy solving technical challenges at scale, this is the role for you.
This position plays a key role in architecting, implementing, and optimizing our hybrid infrastructure, including Azure Cloud, VMware, Hyper-V, Storage and Windows Server platforms.
You'll drive forward key modernization initiatives such as:
Upgrading to Windows Server 2025
Migrating and building workloads in Azure as part of our cloud transformation journey
Modernizing and upgrading our ESXi infrastructure
And more exciting, high-impact projects across our global footprint
In this role, you'll contribute to the technical direction of application hosting, storage, virtualization, and disaster recovery.
You'll collaborate cross-functionally with teams across infrastructure, application development, networking and security to ensure scalable, secure, and high-performing solutions.
If you're passionate about infrastructure modernization, cloud adoption, and continuous improvement, and you bring deep technical expertise with a strategic mindset, we'd love to hear from you.
Responsibilities:
Design, optimize, and implement application hosting solutions in both Azure cloud and on-premise data centers that meet the demands of the business.
Evaluate the current and upcoming infrastructure stack from a security perspective and provide hardening recommendations.
Virtualization and Windows optimization & performance
Active Directory domain consolidations
Coordinates and supports information security efforts in server, virtualization and storage.
This includes working with application developers and database administrators to plan and implement application security within application environments.
Thus providing guidance on risks and vulnerabilities related to common application protocols, web services security, and end user systems.
Scripting and automation of application hosting and storage maintenance
Disaster and Site Recovery
Take part in life cycle management/ refresh of equipment
Systems management and alerting, which may include nonbusiness hours on-call support rotation as needed.
Collaborate with network services, software systems engineering and/or application development to restore service and/or identify problems
Assist with other facets of IT operations and projects as needed.
Qualifications:
10+ years in engineering role for application hosting for global entities with $3B+ in annual revenue.
10+ years with MS Server and Virtualization platforms (VMWare & MS Hypervisor)
10+ years with mass storage units (HP Storage, IBM storage, etc.)
10+ years with ITIL processes and industry best practices for application hosting
5+ years with Azure IaaS and PaaS experience
BS or MS in Computer Science or equivalent education.
Excellent oral and written communication
Strong problem-solving skills, attention to detail and the ability to work both independently and as part of a team.
Ability to manage and deliver multiple priorities in a timely fashion.
Ability to support cross-team collaboration to ensure your focus area integrates with the overall solutions.
Experience with IBM Power Systems and AS400 is a plus.
MCSE, Security, ITIL, and/or Azure certifications are a plus.
Salary: $145,000 - $170,000, bonus eligible
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2025-12-13 06:09:07
