-
Battery Test Equipment Service and Calibration Engineer required to repair and calibrate AC and DC Power Sources and Loads, Battery Test Equipment, and related equipment on premises and customer sites across the UK.
You will also contribute to UKAS accreditation calibration procedures for new equipment and accreditation scope expansion.
Experience
Over 2 years hands on Calibration and Instrumentation experience in servicing, testing, and calibrating electronic and electrical instruments.
National and international calibration standards ISO 17025 and the ability to apply these standards to calibration tasks.
Test and measurement instruments multimeters, oscilloscopes, AC/DC power supplies, insulation testers, etc.
Fault finding in both analogue and digital electronics, interpreting electronic circuit schematics and performing component-level repairs.
Calibration and Documentation detailed reporting using calibration certificates and validation documents.
Calibration software and Microsoft Office tools Excel and Word for reports.
Electrical and electronic components, with the ability to repair faulty instruments to the highest standards.
Driving License: A valid UK driving license to facilitate on-site visits and transportation of equipment.
Responsibilities
Repair power electronic equipment to component level.
Calibrate AC to DC Power Equipment, Battery Test Equipment, and other related instruments to ensure their accuracy and reliability.
Travel to customer sites about 2 weeks per month for calibrations and on site support. ....Read more...
Type: Permanent Location: Petersfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £47000 Per Annum None
Posted: 2026-01-02 13:23:03
-
Instrumentation Field Application Engineer required to join a hands on scientific Field Service team.
You will play a key role in improving product reliability and quality performing software installation and configuration, validation, calibration, and mapping.
Requirements
Education background in Engineering, IT or Metrology.
Over 3 years experience in a similar technical role.
IT and networking experience.
Calibration of metrology equipment.
Fluent in written and spoken English.
Valid Driver???s License.
Role
Installing software and hardware ideally data loggers.
System configuration.
Customer training.
On site calibration of various sensors temperature, humidity, differential pressure.
Customer support.
Contribute to continuous improvement of products and processes. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £53000 Per Annum None
Posted: 2026-01-02 11:37:34
-
Quality Engineer
Location: Tamworth, Staffordshire
Salary: £35,000 £40,000 per annum
Hours: Full-time, Permanent
The Role A precision engineering manufacturer in Tamworth is seeking an experienced Quality Systems Engineer to lead and operate its Quality Management System (QMS).
Reporting to the Head of Production, you'll develop and write quality procedures, conduct audits both internally and across the supply chain, and deliver training to promote continuous improvement.
This is a hands-on role responsible for driving high standards and ensuring compliance throughout all manufacturing and business processes.
Key Responsibilities
- Oversee and develop the Quality Management System, ensuring robust documentation and compliance.
- Organise, manage, and conduct internal audits as well as support external audit processes.
- Provide quality guidance and training across procurement, engineering, and production.
- Champion continuous improvement initiatives and corrective action systems.
- Collate and report on key performance indicators to prevent non-conformities.
- Support product validation, first-off approvals, and application of tools such as Six Sigma, FMEA, and Measurement System Analysis.
- Conduct root cause analysis and work with teams to resolve quality issues.
- Plan and issue Standard Operating Procedures that meet ISO and customer requirements.
- Liaise with various functional teams to validate process improvements and maintain quality standards.
Skills & Experience
- Experience in quality engineering within automotive or precision manufacturing.
- Strong working knowledge of APQP, PPAP, FMEA, MSA and 8D.
- Experience in precision machining and/or manual assembly preferred.
- HNC/HND in Engineering or equivalent.
- Certified Internal Quality Auditor (advantageous).
- Excellent communication and strong IT skills (ERP, MS Office).
- Full UK driving licence required.
To find out more please contact Max Sinclair max@holtengineering.co.uk or apply directly.
Please note in order to be considered for this role you must hold the right to work in the UK without Visa sponsorship now or in the future. ....Read more...
Type: Permanent Location: Tamworth,England
Start: 02/01/2026
Salary / Rate: £35000 - £40000 per annum
Posted: 2026-01-02 10:59:09
-
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team.
The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems.
This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package - Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc90000 - Swiss Franc130000 per annum
Posted: 2026-01-02 01:07:43
-
Avionic System Design Engineer required to work as part of a team across aircraft, aviation and satellite connectivity.
Requirements
Avionics systems and SATCOM technology experience of Iridium, Inmarsat, Viasat, Starlink or similar.
DOORS, JAMA or similar systems engineering tool knowledge.
BEng in Electronics Engineering or related ideally with postgrad qualifications.
UAV regulations, safety standards ARP4754, ARP4761, DO178 or DO254 desirable.
Role
Avionic system design, development, and implementation.
SATCOM system integration of Iridium, Inmarsat, Viasat, Starlink.
Design review including testing, validation and regulatory compliance. ....Read more...
Type: Permanent Location: Farnborough, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2026-01-01 16:15:27
-
Electronics Engineer required to join a team developing advanced instrumentation, sensing and metrology solutions including the design and development of analysis and control systems in analogue and digital electronics focusing on embedded electronics, with FPGA and MCU components.
Requirements
Electronic design experience of PCB schematic capture, layout, manufacture, and testing.
High performance up to 1 MHz, precision analogue circuit design experience.
Design for CE compliance, EMC testing, and product safety knowledge.
Version control systems Git.
FPGA development, Verilog programming, and Xilinx experience.
Microcontroller programming.
PCB design in KiCAD v5 onwards.
1st class or 2:1 degree in Electronics Engineering, Electrical Engineering, or Physics.
The ideal candidate will have a strong technical background in electronics, a passion for instrumentation development.
Role
Specification and design of PCBs.
Maintenance of version-controlled design data and management of PCB fabrication through external suppliers.
PCB verification and validation.
Design, specification, and documentation of cables and wiring used in products and systems.
Conducting regulatory EMC compliance testing. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £63000 Per Annum None
Posted: 2026-01-01 15:54:21
-
Materials Engineer required to join a larger Materials Group focusing on the evaluation and qualification of battery manufacturing materials.
Requirements
Lead/Pb, Lithium and other materials used in battery manufacture experience.
Electrochemistry and battery manufacturing processes understanding.
Engineering or related Degree.
ISO 14001 EHS and ISO 9001 IATF 16949 Quality practices.
Responsibilities
Metals, ceramic and polymer material evaluation and selection including lead/Pb and Lithium materials for battery production.
Validation of prototypes and materials, defining test plans, procedures, and analysing data.
Supervise builds and collaborate with cross functional teams. ....Read more...
Type: Permanent Location: Newport, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £60000 Per Annum None
Posted: 2026-01-01 13:08:21
-
Senior Electronics Engineer required to join a growing team designing and developing motion systems and control algorithms for motor, valve and other mechatronic applications.
Requirements
Extensive experience in electronics development for industrial applications.
PCB design, power electronics, EMI or EMC testing, and simulation.
Linear, SMPS, signal conditioning, and driver circuit design.
PSpice and LTspice.
Hardware architecture design, microcontroller-based designs, and testing for compliance.
Degree and ideally Masters in Electronics, Mechatronics, Embedded Electronics or similar subject.
Full hardware development life cycle, including verification and validation.
Wireless communication protocols and high speed PCB design knowledge.
Responsibilities
Design and develop innovative, cost-effective electronics and controls for proportional valves.
Develop designs, specifications, and recommendations for new and existing product electronics control boards.
Technical peer reviews and provide solutions to complex development and field issues.
Oversee testing and validation, ensuring products meet required certifications. ....Read more...
Type: Permanent Location: Waterlooville, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £70000 Per Annum None
Posted: 2026-01-01 11:41:50
-
Manufacturing Engineer - Medical Technology
A medical devices company based in Cambridgeshire is looking for a manufacturing / new product introduction engineer to join their fledgling team and help take their first products from development through to production.
This company is looking to transform the lives of their patients by providing a step-change in real-time personalised health information via their novel sensor technology.
As a manufacturing engineer within the business, you will be taking lead on their manufacturing process development, including controlling each stage of the process and planning experimental work with prototypes to discover where improvements can be made with the product and processes.
You will also hold responsibility for assessing manufacturing quality, and supporting design for manufacture as products are developed, including modelling product costs, identifying potential suppliers, and supporting supplier audits.
A key aspect of this role will also be applying your knowledge to design verification activities, including the procurement of prototypes for testing and specification and validation of jigs and fixtures.
The company are offering a generous and tailored compensation package which also variety of perks, including monetary bonuses.
They have built an innovative environment and make sure their people have everything they need to make a success of their roles.
You will be joining a multidisciplinary team, working alongside world-class engineers and scientists.
This company is looking for an engineer that has hands-on experience with design and manufacturing, ideally coupled with an understanding of ISO13485 and GMP.
Familiarity with manufacturing process improvement methodologies would be an advantage, as would having a good network of CMOs and tooling specialists.
This role will grow as the company grows and along with your technical contribution you will play a key part in shaping their working practices and team culture.
It is an exciting time to join this company.
If you would like to find out more about this opportunity, then make an application and a consultant within our team will be in touch to discuss it further.
Newton Colmore is a specialist search firm operating within the medical devices and biotechnology sectors.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: £50000 - £60000 per annum + Tailored package + bonus
Posted: 2025-12-29 11:15:08
-
Senior Electronics Design Engineer to work as part of a product research and development team responsible for electronic design from concept to production and release of world beating optical instrumentation systems to be used in green tech, microelectronics, scientific research, life sciences and medicine.
Experience required
Designing electronic circuits and assemblies from concept to production.
Debugging, simulation and validation of electronics and system designs.
Testing and reporting results into the Development team.
Microcontroller, mixed digital and analogue electronic circuit design.
Schematics Capture and PCB Design Tools.
Prototyping: soldering with SMT components
Debugging and validation of electronics and system designs.
STM32F series ARM core processors.
Automated test equipment development to support production and manufacturing.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £43000 - £65000 Per Annum None
Posted: 2025-12-29 10:53:56
-
Join our dynamic team as a Test Support Technician.
As a key contributor, you will be responsible for assisting Test Engineers in various aspects of cell preparation, maintenance, and system checks, including leak integrity.
This is an exciting opportunity to be involved in interpreting Piping and Instrumentation Diagrams, utilizing electrical and electronic measurement tools, and working with flight hardware to prepare customer hardware for testing.
Responsibilities
Your role will encompass a range of responsibilities, including but not limited to
Interpreting and understanding Piping and Instrumentation Diagrams.
Handling flight hardware, preparing it for testing, including instrumentation, and installing it onto the test stand.
Collaborating with Test Engineers to implement process improvements, such as changes to site pressurant systems, new panel builds, modifications, pipe bending and installation, and installing new pressure and propellant vessels.
Ensuring the correct setup of the Data Acquisition System.
Core Skills
We are seeking individuals with the following skills and competencies:
Demonstrable mechanical fitter or practical engineering skills.
Proven experience in the operation of high-pressure gas and fluidic systems.
Skills in using MS Office and associated products. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £30000 Per Annum None
Posted: 2025-12-27 10:01:20
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
Technical Application Specialist
GENERAL PURPOSE OF THE JOB:
The Technical Application Specialist ensures proper application of Tremco products in accordance with company and industry guidelines by providing both on-site and office-based problem resolution assistance.
This individual is a technical liaison between the business and Tremco's field-based internal and external stakeholders.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide or obtain accurate and timely product application, qualification, and/or troubleshooting services to internal colleagues and external business partners
Assist with general on-site product application, training, and general substrate review.
Assist with the generation and maintenance of technical documentation and collateral with various internal departments.
Examples include application instructions, technical data sheets, technical marketing collateral, product training programs, 3rd party testing/validation reports, and other product assets.
Assist in the collection of laboratory data forproject and/or product-specific testing.
Assist with and/or perform in-field and in-house analytical lab testing to confirm the chemical compatibility and physical adhesion properties of Tremco products on specified jobs, for evaluating new areas of application, new product development, and competitive product analysis.
Conduct jobsite observations/evaluations with customers and field sales reps to make accurate and timely product and installation recommendations.
Compose official letters and/or corporate communiques, including installation instructions, job qualification parameters, and competitive product comparisons along with assisting in the development of detail drawings to help secure sales opportunities.
Provide or obtain accurate and timely answers to inquiries on product usage, comparative competitive products, web-site navigation, product specifications, repair techniques, assessment and/or remedial course of action recommendations for jobsite problems, environmental regulations, construction sequencing, and technical product property questions.
Ensure product performance through proper recommendation of jobsite qualification and application techniques.
Possess and leverage a basic knowledge of Tremco's product portfolio.
Learn assigned core product line technology while assisting higher level Application Specialists with occasional direction.
Provide clear written and verbal technical support and product recommendations to internal and external stakeholders including sales representatives, technical representatives, owners, architects, engineers, contractors, installers, etc.
EDUCATION
High School Diploma or GED required.
Bachelor's degree inScience, Civil Engineering,Construction Management or similarfieldpreferred
EXPERIENCE
1+ years of Technical Service, Technical Sales, or Construction Industry experience required.
CERTIFICATES, LICENSES, REGISTRATIONS:
OHSA 10 Preferred but not required
OTHER SKILLS AND ABILITIES:
Experience with Auto CAD, Word, Excel, etc.
Ability to manage multiple, shifting priorities.
Effective team player.
Self-motivated and driven.
Excellent written and verbal communication skills.
Ability to travel up to 50% domestically and internationally.
Hands-on and conceptual mechanical aptitude.
The salary range for applicants in this position generally ranges between $52,960 - $66,200.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-25 14:07:28
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
Technical Application Specialist
GENERAL PURPOSE OF THE JOB:
The Technical Application Specialist ensures proper application of Tremco products in accordance with company and industry guidelines by providing both on-site and office-based problem resolution assistance.
This individual is a technical liaison between the business and Tremco's field-based internal and external stakeholders.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide or obtain accurate and timely product application, qualification, and/or troubleshooting services to internal colleagues and external business partners
Assist with general on-site product application, training, and general substrate review.
Assist with the generation and maintenance of technical documentation and collateral with various internal departments.
Examples include application instructions, technical data sheets, technical marketing collateral, product training programs, 3rd party testing/validation reports, and other product assets.
Assist in the collection of laboratory data forproject and/or product-specific testing.
Assist with and/or perform in-field and in-house analytical lab testing to confirm the chemical compatibility and physical adhesion properties of Tremco products on specified jobs, for evaluating new areas of application, new product development, and competitive product analysis.
Conduct jobsite observations/evaluations with customers and field sales reps to make accurate and timely product and installation recommendations.
Compose official letters and/or corporate communiques, including installation instructions, job qualification parameters, and competitive product comparisons along with assisting in the development of detail drawings to help secure sales opportunities.
Provide or obtain accurate and timely answers to inquiries on product usage, comparative competitive products, web-site navigation, product specifications, repair techniques, assessment and/or remedial course of action recommendations for jobsite problems, environmental regulations, construction sequencing, and technical product property questions.
Ensure product performance through proper recommendation of jobsite qualification and application techniques.
Possess and leverage a basic knowledge of Tremco's product portfolio.
Learn assigned core product line technology while assisting higher level Application Specialists with occasional direction.
Provide clear written and verbal technical support and product recommendations to internal and external stakeholders including sales representatives, technical representatives, owners, architects, engineers, contractors, installers, etc.
EDUCATION
High School Diploma or GED required.
Bachelor's degree inScience, Civil Engineering,Construction Management or similarfieldpreferred
EXPERIENCE
1+ years of Technical Service, Technical Sales, or Construction Industry experience required.
CERTIFICATES, LICENSES, REGISTRATIONS:
OHSA 10 Preferred but not required
OTHER SKILLS AND ABILITIES:
Experience with Auto CAD, Word, Excel, etc.
Ability to manage multiple, shifting priorities.
Effective team player.
Self-motivated and driven.
Excellent written and verbal communication skills.
Ability to travel up to 50% domestically and internationally.
Hands-on and conceptual mechanical aptitude.
The salary range for applicants in this position generally ranges between $52,960 - $66,200.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-12-24 22:07:52
-
The Test Engineer is responsible for developing, executing and reporting Validation & Verification (V&V) assessment tests for technology manufacturing resources, fabrication and assembly.
Test Engineer???s contribute to the development and execution of V&V standards, evaluations and reporting for individual and comprehensive product testing programs.
Experience
Needs to be hands on
Very organized, good time management to ensure stuff happens within the project schedule and V&V group schedules
Technically strong to ensure tool is tested in a thorough way
Responsibilities and Duties
Contribute to the ongoing improvement or creation of procedures, processes and technologies associated with experiments, tests and the overall V&V methodology.
Assume responsibility for the creation, content, adoption and reporting of test plans and programs.
Assume responsibility for the assessment and optimization of test plans and programs with respect to coverage, efficiency and project risk reduction.
Optimize the effectiveness and efficiency of individual tests and broader product testing programs by applying and tailoring standard tests or creating specialized tests.
Employ techniques such as data acquisition, signal and noise analysis, significance studies, sample set optimization, confidence intervals, confidence levels and statistical analysis.
Anticipate test failure modes and events.
Engineer tests so as to record and provide effective investigative test data.
Contribute to analytical and investigative activities such as FMEA, Hazard Analysis and Risk Control, and RCA.
Integrate these and associated methodologies into the development, execution and analysis of experiments and tests.
Execute experiments and tests or oversee their execution by technicians, as required.
....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £42000 Per Annum None
Posted: 2025-12-24 10:58:14
-
- Operations Tools & AIOps
- 6 month Contract role - strong chance of extension possible up to 3 years.
- Start Date: January 2026 - Please only apply if you are able to join on this date. Longer notice periods will not be considered.
About the role
Were looking for an experienced Tool and Automation Architect to lead our Operations Tool Domain and drive the evolution of our automation and monitoring landscape.
This is a senior, strategic role with real ownership.
Youll be responsible for the architecture, re-architecture, and ongoing optimisation of operational tools, embedding AIOps capabilities to improve service quality, resilience, and insight across the estate. Alongside strategy, this role remains hands-on, leading from the front while managing and mentoring a specialist team.
Youll work closely with network operations, IT, cybersecurity, and senior stakeholders to ensure our tools, platforms, and automation frameworks directly support business outcomes.
Key responsibilities
- Own the end-to-end architecture and re-architecture of operational tools, including AIOps enablement
- Define and deliver the strategic roadmap for operations tools and automation
- Identify opportunities for process improvement, optimisation, and intelligent automation
- Lead, manage, and mentor a team of tools and automation specialists
- Remain hands-on across solution design, development, testing, and validation
- Oversee day-to-day operations of monitoring and automation platforms
- Manage the full lifecycle of operational tools from design through to implementation and support
- Establish real-time performance monitoring, reporting, and alerting frameworks
- Proactively identify and resolve performance, reliability, and scalability issues
- Ensure compliance with organisational, legal, and regulatory requirements
- Manage budgets, forecasting, and resource allocation for tools and automation initiatives
- Collaborate with internal teams and external vendors to deliver effective solutions
- Produce clear documentation covering architecture, processes, and configurations
- Provide regular reporting and updates to senior and executive stakeholders
- Evaluate emerging technologies and best practices within AIOps and automation
- Partner closely with cybersecurity teams to ensure secure tool design and operation
- Lead technical evaluations and validations of tooling partners and platforms
- Assess automation use cases, ensuring measurable value and alignment with strategic objectives
Skills and experience
- Bachelors or Masters degree in Computer Science, Software Engineering, or a related discipline
- 10+ years experience in operations tools, automation, or a closely related domain
- Proven experience leading and developing high-performing technical teams
- Strong programming capability in languages such as Java, Python, or C#
- Solid experience with database design, SQL, and platforms such as MySQL, PostgreSQL, or Oracle
- Strong understanding of telecommunications and network concepts, including routing and protocols
- Demonstrated experience managing budgets and delivering cost-effective solutions
- Hands-on experience with AIOps and automation platforms such as Moogsoft, Splunk ITSI, IBM Watson AIOps, Dynatrace, or Ansible
- Deep experience with ServiceNow ITSM, ITOM, and CMDB, including integrations, CI correlation, workflows, and automation
- Excellent communication skills, with the ability to engage technical and non-technical stakeholders
- Analytical, structured, and outcome-focused mindset
Why this role
This is an opportunity to take genuine ownership of an operations tooling landscape, influence strategy at a senior level, and build automation capabilities that deliver real, measurable impact.
If youre an architect who enjoys combining strategy with hands-on delivery, this role offers the scope, complexity, and influence to match your experience.
Full Visa Sponsorship available. ....Read more...
Type: Permanent Location: Dubai,United Arab Emirates
Start: 24/12/2025
Salary / Rate: AED30000 - AED32000 per annum
Posted: 2025-12-24 09:03:04
-
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely.
Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable. ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £36000 Per Annum None
Posted: 2025-12-23 10:09:02
-
Head of Product Development
High Wycombe£80,000 - £90,000 + benefits
Are you ready to lead advanced technology development in a highly specialised engineering environment?
We're seeking an experienced Head of Product Development to lead the evolution of a portfolio of sophisticated scientific and sensing products used in analytical and industrial applications.
This is a senior leadership role combining strategic oversight, deep technical expertise, and people management within a precision technology setting.
You'll be responsible for driving new product innovation, enhancing existing solutions, and leading a multidisciplinary team of engineers and scientists to deliver high-performance, reliable products to market.
The Role
In this position, you will:
Define and deliver the product development roadmap in line with business objectives
Lead, mentor, and develop a cross-functional technical team, promoting collaboration and high performance
Oversee the design, development, testing, and validation of new products and system upgrades
Drive continuous improvement of existing products to support growth and market expansion
Manage development budgets, timelines, and resource planning
Work closely with manufacturing, quality, sales, suppliers, and external partners to deliver scalable solutions
Ensure compliance with ISO quality standards, regulatory requirements, and intellectual property considerations
Stay informed on emerging technologies, materials, and electronic system advancements relevant to the product range
About You
You'll be a technically credible leader with a strong background in complex product development, bringing:
An MSc in Physics, Electrical Engineering, Materials Science, or a related discipline (PhD highly desirable)
10+ years' experience in advanced technology, scientific instrumentation, semiconductor devices, or related fields
Strong understanding of sensor systems, electronics, and data analysis
Proven experience leading and developing technical teams (typically 5-10 people)
A track record of delivering products from concept through to production
Excellent analytical, problem-solving, and communication skills
Experience within regulated environments, precision instrumentation, low-noise electronics, or patented technologies would be advantageous.
Why Join?
Based in High Wycombe, this is an excellent opportunity to take ownership of product strategy and development within a technically driven organisation.
You'll have genuine influence over technology direction, team growth, and long-term innovation in a role that blends leadership with hands-on technical challenge.
If you're motivated by building high-performing teams and delivering complex products to market, we'd love to hear from you. ....Read more...
Type: Permanent Location: High Wycombe, England
Start: ASAP
Salary / Rate: £80000 - £90000 per annum
Posted: 2025-12-23 10:01:54
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2025-12-23 09:53:39
-
A Senior Hardware Design Engineer is sought to join an innovative engineering team in Essex, responsible or leading projects designing, developing, and testing hardware solutions that contribute to our range of high-performance products.
The Senior Hardware Design Engineer, Essex, will lead technical excellence in the field, guiding design and validation practices and mentoring junior engineers, collaborating with senior engineers across hardware, software, mechanical and test domains.
You'll draw on deep engineering expertise, production methodologies, and supplier processes to ensure robust, high-performance product development.
Responsibilities include:
Work with Product Management to define product and design specifications.
Lead in the design and development of digital, analogue, and RF hardware products, providing support to junior engineers.
Create detailed schematics and PCB layouts using Altium Designer.
Perform component selection, simulation, and analysis to ensure optimal performance.
Develop and execute test plans for prototypes and final products.
Conduct debugging and validation using test equipment such as oscilloscopes, logic analysers, and spectrum analysers.
Collaborate with mechanical, software, test, and manufacturing teams to ensure efficient hardware/software integration and delivery.
The Senior Hardware Design Engineer, Essex, will have the following key skills:
Bachelor's or Master's degree in Electronic Engineering, or equivalent industry experience.
Proven experience in hardware design and development with proficiency in Altium Designer.
Expertise in high-speed signal design, RF, power management, and EMI/EMC considerations.
Strong debugging skills with hands-on experience using lab equipment.
Knowledge of FPGA design (VHDL/Verilog) or microcontroller-based systems, with an understanding of embedded software development.
APPLY NOW - Senior Hardware Design Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.Com or call Adam on 01582878821/ 07961158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £55000 - £63000 per annum
Posted: 2025-12-23 09:52:28
-
A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry.
The Senior Electronics Test Engineer, Essex, will take ownership of complex testing projects, applying strong analogue and digital expertise to resolve technical issues, support product development, and ensure the highest engineering standards.
You will also play a key role in developing automated test systems and mentoring junior colleagues.
Responsibilities include:
Perform in-depth testing of new and existing electronic modules to the highest standards.
Lead complex projects in collaboration with international colleagues.
Resolve advanced electronic test issues using technical knowledge and initiative.
Develop C++ software applications for engineering and production test systems.
Provide coaching, support, and technical guidance to engineers and technicians.
The Senior Electronics Test Engineer, Essex, will have the following key skills:
Bachelor's or Master's degree in Electronic or Electrical Engineering.
Proven experience in electronics testing (analogue and digital).
Strong circuit design, signal processing, and fault-finding skills.
Proficiency in C++ (or similar) for automated test systems.
Experience with oscilloscopes, digital multimeters, signal generators, and logic analysers.
APPLY NOW - Senior Electronics Test Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.com Or call Adam on 01582 878821 / 07961158768 ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-12-23 09:51:32
-
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Lead Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking a Lead Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries.
You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Lead Electronics Design Engineer, based in Surrey:
Proven experience within a senior electronics design role - mentor or managed small teams
Mixed signal design within a regulated industry i.E.
Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
C Software programming
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Lead Electronics Design Engineer job, based in Surrey, please send your CV to ndrain@redlinegroup.Com, or for more information contact Nick Drain on 01582 878828 or 07961158786 ....Read more...
Type: Permanent Location: Surrey, England
Start: ASAP
Salary / Rate: Up to £70000 per annum
Posted: 2025-12-23 00:00:03
-
RF Engineer - Senior
Location: Bradford, West Yorkshire (Hybrid)
An exciting opportunity has arisen for a Senior RF Engineer to join a specialist UK electronics company working on advanced RF and microwave systems.
The company designs, develops, and delivers high-performance RF solutions across multiple industries, including defence, aerospace, and communications.
This role is ideal for a technically skilled engineer with hands-on experience in RF design, testing, and integration who thrives in a collaborative, high-precision engineering environment.
Main Responsibilities of the RF Engineer - Senior (based in Bradford):
Design, analyse, and optimise RF circuits and subsystems across microwave frequency bands (1GHz-18GHz).
Develop and implement low-noise amplifiers (LNAs), power amplifiers (PAs), mixers, filters, oscillators, and synthesizers.
Conduct RF system architecture and front-end design, balancing performance, cost, power, and size.
Execute RF simulation, modelling, and statistical analysis using industry-standard tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Perform RF testing and validation using spectrum analysers, VNAs, signal generators, power meters, and noise figure analysers
Troubleshoot RF issues at component, PCB, and system level and correlate lab measurements with simulations.
Collaborate with PCB layout engineers to ensure controlled impedance, grounding, shielding, and overall RF performance.
Support EMC, EMI, and regulatory compliance testing and certification activities.
Mentor junior RF engineers and contribute to technical design reviews, reports, and customer documentation.
Requirements of the RF Engineer - Senior (based in Bradford):
Proven experience in RF design, 1GHz-18GHz frequency range, with LNAs, PAs, mixers, filters, oscillators, and synthesizers.
Strong understanding of RF system design, linearity, noise figure, intermodulation, and spectral purity.
Hands-on experience with RF test equipment and measurement techniques.
RF PCB layout knowledge and experience integrating RF designs into larger mixed-signal or digital systems.
Proficiency with RF CAD/simulation tools (Keysight ADS, AWR Microwave Office, CST, HFSS).
Experience with scripting/programming for RF analysis or test automation (Python, MATLAB, LabVIEW).
Excellent problem-solving skills, attention to detail, and ability to communicate complex RF concepts clearly.
Experience in mentoring or leading RF work packages preferred.
Understanding of product development lifecycle, cost, risk, and schedule management.
Ability to work independently as well as collaboratively across multidisciplinary teams.
To apply for this RF Engineer - Senior role based in Bradford, please send your CV to: nking@redlinegroup.Com or call 01582 878 839 ....Read more...
Type: Permanent Location: Bradford, England
Start: ASAP
Salary / Rate: £55000 - £70000 per annum
Posted: 2025-12-22 14:45:29
-
Experimental Data Engineer - Advanced Engineering Start-Up - Oxfordshire
We have an incredible opportunity for an Experimental Data Engineer to join one of the UK's most exciting venture-backed deep-tech start-ups.
This fast growing company is redefining the future of high-performance engineered systems and advanced materials, combining world-class engineering with cutting edge data science, proprietary software, and additive manufacturing.
Innovation here isn't theoretical — it's hands-on, tested, and built into the next generation of advanced products.
In this role you'll work alongside exceptional engineers, metallurgists, and software developers at the forefront of materials design, precision manufacturing, and experimental validation.
This is a chance to be part of a team where experimentation, insight, and creativity directly influence real-world technology.
As an Experimental Data Engineer, you will design, build, and maintain advanced testing and data acquisition systems.
You will configure hardware, integrate sensors, and develop software to collect, process, and visualise complex datasets, turning raw data into actionable insights that drive performance and product development.
You will also automate workflows, expand experimental capabilities with new technologies, and collaborate closely with design and engineering teams to ensure all tests are feasible, accurate, and impactful.
The ideal candidate will have a strong background in data acquisition systems, preferably using LabVIEW, Python, or C, with hands-on experience in hardware integration and control systems.
You will be comfortable working with high-speed and high-temperature data, familiar with electronics and sensors, and experienced in collaborative coding using tools such as Git.
Candidates with a PhD or industry experience in Mechanical, Aerospace, Electrical, or related STEM disciplines are highly desirable.
Additional experience in embedded electronics, performance testing, or UX design for control and visualisation systems will be a strong advantage.
Competitive salary with annual performance-based bonuses
, Equity options — share in the company's long-term success
, Private healthcare and comprehensive wellbeing package
, Generous pension scheme (9% non contributory)
, Dedicated R&D time to explore new technologies and research ideas
, Annual training & conference allowance of £5,000 for personal development
, Flexible and hybrid working — work where you're most effective
, Opportunities for international collaboration with teams in Europe, Asia, and the US
, 25 days holiday plus your birthday off and extra days for long service
, Regular team offsites, guest talks, and hack weeks to spark innovation
, An open, supportive culture that values curiosity, creativity, and deep technical mastery
If you're passionate about data, experimentation, and cutting-edge engineering, this is your chance to help shape the future of advanced technology.
To apply for this position, please send your CV to Lina Savjani at Noir.
NC/LS/EXPDE ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: PERM
Salary / Rate: £45000 - £70000 per annum + 9% pension, healthcare, DIS
Posted: 2025-12-22 02:02:04
-
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team.
The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems.
This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package - Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc90000 - Swiss Franc130000 per annum
Posted: 2025-12-22 01:13:35
-
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems.
They are also involved in creating composite materials such as carbon fibre tubes and aero-structures.
The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Responsibilities
Tooling design and documentation.
Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Qualifications
BS or MS in Engineering discipline or Physics.
Experience with Lean Manufacturing.
3D solid modelling experience.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2025-12-21 11:25:27
