-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-11-18 14:10:21
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-11-18 14:09:58
-
JOB DESCRIPTION
Job Title: Area Manager
Location: AZ, NM, & Southern NV
Department: Rust-Oleum US Sales
Reports To: Western Zone Manager
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
As an Area Manager, the candidate will be responsible for driving sales and represent Rust-Oleum's vast portfolio of products to customers within the assigned geographic territory.
Territory to include Arizona, New Mexico & Southern Nevada.
Travel accounts for 40-50%.
Candidates will need to reside within their provided territory.
Job Duties:
Sales - this job is all about increasing market share by selling the Rust-Oleum Portfolio of products in their assigned geographic territory.
Increase distribution of all Rust-Oleum brands within the assigned dealer and distributor base by expanding market share and reducing competitive presence.
Maintain regular contact with customers to identify business opportunities and increase market share.
Identify customer needs to facilitate product mix t and platform recommendations.
Achieve profitable quarterly sales objectives and goals.
Execute category management strategies with dealer base to grow market share.
Develop and follow a comprehensive time and territory management plan to maximize coverage and efficiently manage expenses.
Provide merchandising, pricing, and promotional support to the dealer base.
Work with internal and external customers to meet all commitments and deadlines.
The ability to use all Microsoft Office products to analyze data, communicate with customers, and make profitable recommendations to internal and external customers.
Able to climb a ladder and do physical activities as required by the position.
Requirements:
1 - 3 years of previous outside sales experience preferrable in paints & coatings
Associate or bachelor's degree in a business-related field and/or equivalent work experience preferred.
Prior experience in a sales service role with demonstrated success in customer retention.
Requires the ability to effectively analyze a customer's business and successfully communicate how our products and services can help them increase their sales and profits.
Ability to analyze data and complete a Profit & Loss analysis as required.
Outstanding oral and written communication skills and presentation skills
Self-starter able to manage own time, schedule, and sales territory, with a proven ability to multitask.
Ability to work and travel within assigned territory 40-50% of the time.
Periodic evening and weekend hours are required for trade shows and customer events.
Proven history of exceptional follow-up skills.
Proven history of working with diverse customer base including independent dealers, distributors, MRO accounts, professional painting contractors and OEM.
Ability to understand and carry out instructions furnished in written or oral format.
Ability to analyze territory performance reports and develop sales territory business plans.
Ability to analyze problems, collect data, establish facts, draw valid conclusions, and write reports to communicate the information.
Must possess a valid driver's license and maintain a motor vehicle record within acceptable limits as prescribed by Rust-Oleum.
Strong understanding of Microsoft Teams, Excel
Experience using analytics such as Power BI, SAP and PowerPoint is desired
Salary Target Range: $75,000 - $90,000
*Company furnished car, laptop, cell phone.
*This is a remote field-based position out of a home office.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-11-17 06:08:51
-
JOB DESCRIPTION
Job Title: Area Manager
Location: AZ, NM, & Southern NV
Department: Rust-Oleum US Sales
Reports To: Western Zone Manager
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
As an Area Manager, the candidate will be responsible for driving sales and represent Rust-Oleum's vast portfolio of products to customers within the assigned geographic territory.
Territory to include Arizona, New Mexico & Southern Nevada.
Travel accounts for 40-50%.
Candidates will need to reside within their provided territory.
Job Duties:
Sales - this job is all about increasing market share by selling the Rust-Oleum Portfolio of products in their assigned geographic territory.
Increase distribution of all Rust-Oleum brands within the assigned dealer and distributor base by expanding market share and reducing competitive presence.
Maintain regular contact with customers to identify business opportunities and increase market share.
Identify customer needs to facilitate product mix t and platform recommendations.
Achieve profitable quarterly sales objectives and goals.
Execute category management strategies with dealer base to grow market share.
Develop and follow a comprehensive time and territory management plan to maximize coverage and efficiently manage expenses.
Provide merchandising, pricing, and promotional support to the dealer base.
Work with internal and external customers to meet all commitments and deadlines.
The ability to use all Microsoft Office products to analyze data, communicate with customers, and make profitable recommendations to internal and external customers.
Able to climb a ladder and do physical activities as required by the position.
Requirements:
1 - 3 years of previous outside sales experience preferrable in paints & coatings
Associate or bachelor's degree in a business-related field and/or equivalent work experience preferred.
Prior experience in a sales service role with demonstrated success in customer retention.
Requires the ability to effectively analyze a customer's business and successfully communicate how our products and services can help them increase their sales and profits.
Ability to analyze data and complete a Profit & Loss analysis as required.
Outstanding oral and written communication skills and presentation skills
Self-starter able to manage own time, schedule, and sales territory, with a proven ability to multitask.
Ability to work and travel within assigned territory 40-50% of the time.
Periodic evening and weekend hours are required for trade shows and customer events.
Proven history of exceptional follow-up skills.
Proven history of working with diverse customer base including independent dealers, distributors, MRO accounts, professional painting contractors and OEM.
Ability to understand and carry out instructions furnished in written or oral format.
Ability to analyze territory performance reports and develop sales territory business plans.
Ability to analyze problems, collect data, establish facts, draw valid conclusions, and write reports to communicate the information.
Must possess a valid driver's license and maintain a motor vehicle record within acceptable limits as prescribed by Rust-Oleum.
Strong understanding of Microsoft Teams, Excel
Experience using analytics such as Power BI, SAP and PowerPoint is desired
Salary Target Range: $75,000 - $90,000
*Company furnished car, laptop, cell phone.
*This is a remote field-based position out of a home office.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-11-17 06:08:31
-
.NET Software Engineer - Fashion Industry- Amsterdam, Netherlands
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Ontwikkelaar, .NET Software Engineer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Software Engineer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Home working opportunities.
Free subscription to the service once online.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Amsterdam, Netherlands / Remote Working
Salary: €5.000 - €7.000 Per Month + Bonus + Benefits
Applicants must be based in the Netherlands and have the right to work in the Netherlands even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRNETHERLANDSRECSPNOIRNETHERLANDSRECNOIREUROPEREC
NC/CM/AMS6080 ....Read more...
Type: Permanent Location: Amsterdam, Netherlands
Start: ASAP
Salary / Rate: €5000 - €7000 per month + Bonus + Benefits
Posted: 2025-11-17 02:02:43
-
.NET Software Engineer - Amsterdam, Netherlands
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Ontwikkelaar, .NET Software Engineer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Software Engineer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Home working opportunities.
Free subscription to the service once online.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Amsterdam, Netherlands / Remote Working
Salary: €7.000 - €9.000 Per Month + Bonus + Benefits
Applicants must be based in the Netherlands and have the right to work in the Netherlands even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRNETHERLANDSRECSPNOIRNETHERLANDSRECNOIREUROPEREC
NC/CM/AMS84108 ....Read more...
Type: Permanent Location: Amsterdam, Netherlands
Start: ASAP
Salary / Rate: €7000 - €9000 per month + Bonus + Benefits
Posted: 2025-11-17 02:02:37
-
.NET Software Engineer - Hamm, Germany
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Software Engineer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Home working opportunities.
Free subscription to the service once online.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Hamm, Germany / Remote Working
Salary: €65.000 - €85.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/HAM6585 ....Read more...
Type: Permanent Location: Hamm (59063), Germany
Start: ASAP
Salary / Rate: €65000 - €85000 per annum + Bonus + Benefits
Posted: 2025-11-17 02:02:33
-
.NET Software Engineer - Fashion Industry- Lausanne, Switzerland
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Ontwikkelaar, .NET Software Engineer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Software Engineer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Home working opportunities.
Free subscription to the service once online.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Lausanne, Switzerland / Remote Working
Salary: 130'000 CHF - 140'000 CHF + Bonus + Benefits
Applicants must be based in Switzerland and have the right to work in Switzerland even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRSWITZERLANDRECSPNOIRSWITZERLANDRECNOIREUROPEREC
NC/CM/LAU130140 ....Read more...
Type: Permanent Location: Lausanne, Switzerland
Start: ASAP
Salary / Rate: €130000 - €140000 per annum + Bonus + Benefits
Posted: 2025-11-17 02:02:05
-
.NET Software Engineer - Hanover, Germany
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Software Engineer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Home working opportunities.
Free subscription to the service once online.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Hanover, Germany / Remote Working
Salary: €75.000 - €95.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/HAN7595 ....Read more...
Type: Permanent Location: Hannover (30165), Germany
Start: ASAP
Salary / Rate: €75000 - €95000 per annum + Bonus + Benefits
Posted: 2025-11-17 02:02:04
-
.NET Developer - Nottingham
(Tech stack: .NET Developer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Engineer, Architect, .NET Developer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Developer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Private medial healthcare (family plan included).
Company pension (15% company contribution).
Home working opportunities.
Free subscription to the service once online.
Pluralsight subscription.
27 days holiday.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Nottingham, UK / Remote Working
Salary: £45,000 - £75,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £75000 per annum + Bonus + Pension + Benefits
Posted: 2025-11-17 02:01:42
-
.NET Developer - Harpenden
(Tech stack: .NET Developer, .NET 9, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Engineer, Architect, .NET Developer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Developer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Private medial healthcare (family plan included).
Company pension (15% company contribution).
Home working opportunities.
Free subscription to the service once online.
Pluralsight subscription.
27 days holiday.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Harpenden, Hertfordshire, UK / Remote Working
Salary: £45,000 - £75,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions! ....Read more...
Type: Permanent Location: Harpenden, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £75000 per annum + Bonus + Pension + Benefits
Posted: 2025-11-17 02:01:02
-
.NET Developer - Market Harborough, Leicestershire
(Tech stack: .NET Developer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Engineer, Architect, .NET Developer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Developer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Private medial healthcare (family plan included).
Company pension (15% company contribution).
Home working opportunities.
Free subscription to the service once online.
Pluralsight subscription.
27 days holiday.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: Market Harborough, Leicestershire, UK / Remote Working
Salary: £35,000 - £45,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC ....Read more...
Type: Permanent Location: Market Harborough, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 per annum + Bonus + Pension + Benefits
Posted: 2025-11-17 02:00:50
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-15 14:09:43
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-15 14:08:45
-
JOB DESCRIPTION
The primary function of a Tremco Project & Compatibility Lab Technician is to manage internal testing procedures that are used to establish a compatibility matrix for all Tremco products that are subject to contact in typical construction applications.
The P&C Lab Technician will perform Project Testing and support testing functions for Decks, Below Grade Waterproofing, Sealants and Air Barriers.
These test functions include Product Comparison, Product Compatibly, ASTM Testing (potential addendums to existing standard method requirements).
The P&C Lab Technician will be required to communicate results in an organized manner and manage the flow of data through the proper channels to the proper recipients in a timely fashion
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Laboratory: 75% of time will be spent in the laboratory in constructing test samples, documenting performance and maintaining a clean working environment.
Must be familiar with a laboratory setting and safety and be able to: Test to ASTM C 1248, ASTM C 1247, ASTM C 1193, ASTM C 1135, ASTM C 1087, ASTM 794, ASTM C 793, ASTM C 719, ASTM C 679, ASTM C 679, ASTM C 661, ASTM C 639 and ASTM C 510 standard test methods. Prepare test substrates for testing using cutting equipment including band saw, table saw and wet saw. Document observations and results of standard testing in detailed test reports. Maintain organization of test articles during sample preparation, conditioning, testing and storage. Maintain cleanliness of laboratory environment and enforce laboratory hygiene plan.
Use of material testing equipment including microscope and Instron 5565. Other duties as assigned. Customer Support (External and Internal): Provide timely response on requests from internal and external customers as it relates to compatibility testing and posting of results in the database.
Develop a test schedule to provide accurate turnaround time estimates. Maintain quick and accurate written and verbal responses to technical and non-technical questions. Work with minimal dependence. Display excellent problem solving & communication skills. Provide general Technical Service phone support. Travel on a limited basis to job sites and for product application support training. Possess a team player attitude. Be self-motivated and dedicated to quality work. Other duties as assigned.
EDUCATION
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
EXPERIENCE
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
OTHER SKILLS AND ABILITIES:
Use of common construction tools such as wet saw, band saw and caulking gun. Familiar with laboratory safety and general laboratory procedures.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:10
-
JOB DESCRIPTION
The primary function of a Tremco Project & Compatibility Lab Technician is to manage internal testing procedures that are used to establish a compatibility matrix for all Tremco products that are subject to contact in typical construction applications.
The P&C Lab Technician will perform Project Testing and support testing functions for Decks, Below Grade Waterproofing, Sealants and Air Barriers.
These test functions include Product Comparison, Product Compatibly, ASTM Testing (potential addendums to existing standard method requirements).
The P&C Lab Technician will be required to communicate results in an organized manner and manage the flow of data through the proper channels to the proper recipients in a timely fashion
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Laboratory: 75% of time will be spent in the laboratory in constructing test samples, documenting performance and maintaining a clean working environment.
Must be familiar with a laboratory setting and safety and be able to: Test to ASTM C 1248, ASTM C 1247, ASTM C 1193, ASTM C 1135, ASTM C 1087, ASTM 794, ASTM C 793, ASTM C 719, ASTM C 679, ASTM C 679, ASTM C 661, ASTM C 639 and ASTM C 510 standard test methods. Prepare test substrates for testing using cutting equipment including band saw, table saw and wet saw. Document observations and results of standard testing in detailed test reports. Maintain organization of test articles during sample preparation, conditioning, testing and storage. Maintain cleanliness of laboratory environment and enforce laboratory hygiene plan.
Use of material testing equipment including microscope and Instron 5565. Other duties as assigned. Customer Support (External and Internal): Provide timely response on requests from internal and external customers as it relates to compatibility testing and posting of results in the database.
Develop a test schedule to provide accurate turnaround time estimates. Maintain quick and accurate written and verbal responses to technical and non-technical questions. Work with minimal dependence. Display excellent problem solving & communication skills. Provide general Technical Service phone support. Travel on a limited basis to job sites and for product application support training. Possess a team player attitude. Be self-motivated and dedicated to quality work. Other duties as assigned.
EDUCATION
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
EXPERIENCE
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
OTHER SKILLS AND ABILITIES:
Use of common construction tools such as wet saw, band saw and caulking gun. Familiar with laboratory safety and general laboratory procedures.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:39
-
Full-Time | Independent Opticians | Luxury Eyewear | Leadership Opportunity
Zest Optical recruitment is working alongside a leading independent Opticians near Kingston upon Hull, East Yorkshire, to recruit a full-time Dispensing Optician.
This is a rare chance to join a highly respected practice offering a premium clinical experience and a carefully curated selection of exclusive eyewear brands.
Dispensing Optician - Role Highlights
Join a 100% independently owned practice
Rotate between 2-3 boutique branches in picturesque villages surrounding Hull
Provide an in-depth, quality-driven clinical and styling experience
Work with advanced optical equipment and a handpicked range of exclusive frames and lenses
Involved in all aspects of practice life:
Dispensing
Measurements and adjustments
Frame Selections
Complex patient queries
Potential to move into a leadership or training role
Working hours: Monday-Saturday, 9am-5pm (4pm on Saturdays)
Salary from £28,000, negotiable depending on experience, plus a lucrative bonus scheme
Dispensing Optician - Requirements
Qualified Dispensing Optician registered with the GOC (Applications from Student DOs will also be considered)
Passionate about eyewear, fashion, and styling
Calm, confident, and professional in patient interactions
Eager to learn and develop professionally
Why Join?
This is a fantastic opportunity for a Dispensing Optician looking to escape the high-street model and work in a supportive, forward-thinking environment where patient care and personal development come first.
Apply Now
To avoid missing out on this opportunity, please send your CV to Rebecca Wood using the ‘Apply' link.
You can also message us via WhatsApp on 07933 115681 for a quick chat about the role or other opportunities.
https://lnkd.in/dGyVayep ....Read more...
Type: Permanent Location: Kingston Upon Hull, England
Salary / Rate: Bonus
Posted: 2025-11-14 13:22:36
-
A high end independent Opticians based in Cambridge are looking for a full time Optical Assistant to join the team
Optical Assistant - Role
Multi-award winning practice
Modern, Boutique environment
Close knit team with a family feel
A focus on the customer experience
Varied frame range including exclusive designer and niche brands
Travel to international trade shows
Regular training session both in-house and external
Working 5 days a week including a Saturday
Opening hours from 8.30am to 5.30pm
Salary between £22,000 to £25,000 DOE
Bonus scheme
Free parking available
Optical Assistant - Requirements
1 + Years experience of working in an Opticians
Flair for fashion
Creative
Willingness to go above and beyond
Loyal
Team player
Attention to detail
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: £22000 - £25000 per annum
Posted: 2025-11-14 13:22:32
-
A small group of independent Opticians based in East Sussex are looking for a full or part time Dispensing Optician in Battle.
Dispensing Optician - Role
High end independent Opticians
Single testing room independent
Excellent repuation in the area
Relaxed, patient focused environment
Dispensing high quality frames and lenses - Wiliam Morris, Walter and Herbert, Wolf
Focus on tailored eyecare
Full or part time - 9am to 5.15pm
Flexibility around school hours and Saturdays
Salary between £28,000 to £35,000 DOE
Professional fees paid
Free parking close by
5 weeks Holidays plus bank holidays
Dispensing Optician - Requirements
GOC registered
Must be calm, comfortable and confident at all times when talking to patients.
Maintain the exceptional levels of service this practice is well known for
Interest in fashion and trends
Team player
Forward thinking
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible. ....Read more...
Type: Permanent Location: Battle, England
Salary / Rate: £28000 - £35000 per annum
Posted: 2025-11-14 13:20:21
-
A premium group of independent Opticians in the Kingston upon Hull area are looking to recruit a full time Optometrist to join the team.
Each practice is located in beautiful villages on the outskirts of Hull, all offering exceptional levels of eyecare.
Optometrist - Role
Award winning group of independent Opticians
Luxury, high end environment
30-40 min testing times
Access to the latest testing equipment - with fully computerised testing charts (iMac), fundus cameras, latest Humphrey Visual Field Analysers and Optomap
Working as the sole Optometrist
Support of a qualified Dispensing Optician and an experienced Optical Assistant team
Full time - 5 days a week including a Saturdays (No late nights, Sundays or Bank Holidays)
9am - 5.30pm opening hours
Salary between £50,000 to £60,000
Family and friends discount
Professional fees paid
Onsite parking
Access to higher qualifications if interested.
Optometrist - Requirements
Fully qualified Optometrist registered with the GOC
Interest in working in a close-knit team where everybody looks out for each other
Flair for fashion
Exceptional customer service skills
Balance between clinical and commercial skills
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible. ....Read more...
Type: Permanent Location: Kingston Upon Hull, England
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-11-14 13:20:19
-
A modern independent Opticians based in Hove, East Sussex are on the lookout for a full time Dispensing Optician.
The practice has been established for more than 60 years and has an excellent clinical reputation in the area.
Dispensing Optician - Role
High end dispensing, stocking many leading brands such as Lindberg, Starck, Silhouette, Rayban, Revo, LaFont, LA Eyewear
Amazing 5
* reviews
Diverse patient base
Advanced eye examinations
Providing a comprehensive and bespoke dispensing service
Myopia management
Working alongside two qualified Dispensing Opticians and a support team
Ensuring each patient has an amazing experience
Full Time - 9am to 5.30pm (4pm on a Sat)
Dispensing Optician - Requirements
GOC registered
Newly qualified will also be considered
Ambitious
Must be calm, comfortable and confident at all times when talking to patients.
Maintain the exceptional levels of service this practice is well known for
Interest in fashion and trends
Dispensing Optician - Salary and benefits
Basic salary between £28,000 to £35,000
No Sunday or late night working
Annual 4 weeks holiday, rising each year
Government based pension scheme
Annual Paid for CET event
GOC and ABDO fees paid
Further training and development opportunities
To apply for this role please press the apply now link or call Rebecca Wood on 01142381726 for more information. ....Read more...
Type: Permanent Location: Hove, England
Salary / Rate: £28000 - £35000 per annum
Posted: 2025-11-14 13:20:18
-
Full-Time Opportunity | Independent Luxury Opticians | Multiple Locations Near Hull
Zest Optical recruitment is working in partnership with a prestigious independent Opticians based near Kingston upon Hull, East Yorkshire, to recruit a full-time Optical Assistant.
This is an exciting opportunity to join a modern, patient-focused practice known for its premium eyewear collections and exceptional customer service.
Optical Assistant - Role Overview
Join a luxury, modern independent practice
Work across 2-3 boutique branches located in scenic villages surrounding Hull
Provide a personal styling and shopping experience for every customer
Use the latest optical equipment and premium lens technology
Focus on quality over quantity, working with exclusive brands not found elsewhere in the area
Involved in a variety of duties including:
Front-of-house and reception
Dispensing, fittings, measurements, and adjustments
Excellent earning potential through a generous bonus scheme
Working hours: Monday to Saturday, 9am-5pm (4pm on Saturdays)
Optical Assistant - Requirements
Previous experience in an Opticians or optical retail environment
Strong interest in fashion, eyewear, and styling
Confident handling high-value dispensing and customer consultations
Calm, professional, and confident in communication
Enthusiastic about learning and career development
Why Apply?
This is a fantastic opportunity for an Optical Assistant who wants to be part of a high-end, forward-thinking independent practice, where your input and expertise are truly valued.
Apply Now
To avoid missing out, please send your CV to Rebecca Wood by clicking the ‘Apply' link today. ....Read more...
Type: Permanent Location: Kingston Upon Hull, England
Salary / Rate: Bonus
Posted: 2025-11-14 13:20:18
-
.NET Developer - London
(Tech stack: .NET Developer, .NET 9, C#, Azure, Angular 19, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Engineer, Architect, .NET Developer)
After 15 years' experience in the fashion industry, our client has a mission to change the way people find clothes they love by combining technology with the personal touch of seasoned style experts.
Our client is not merely concerned with supplying clothes, but truly believes in supplying a personal touch to every single customer.
They are aiming to help customers save time, look great and evolve personal styles over time.
How? Our client is creating a new subscription service to supply tailored clothes with every fashion season.
Every season our client prepares a box full of stylish pieces from well-loved brands, selected in accordance with each customers' preselected unique fashion tastes.
To achieve this, our client is looking for .NET Developer with excellent experience of: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL.
There are opportunities for training into technologies such as: .NET 9, Azure, Angular 19, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and MongoDB.
Their benefits include the following:
Bonus (10-15%).
Share options.
Private medial healthcare (family plan included).
Company pension (15% company contribution).
Home working opportunities.
Free subscription to the service once online.
Pluralsight subscription.
27 days holiday.
Customers come first.
They want a shopping experience that is easy, accessible and supplies well-known brands hassle free.
Our client believes this is achievable and wants to revolutionize the shopping experience.
If you would like to explore the possibility of joining the revolution, please do apply today!
Location: London, UK / Remote Working
Salary: £95,000 - £115,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £95000 - £115000 per annum + Bonus + Pension + Benefits
Posted: 2025-11-14 02:00:03
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $23-$26/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Lab Technician will be to complete and document performance testing of various coating attributes by making laboratory samples of paint technologies including color evaluations and color matching as well as other laboratory functions and by assisting in the development and optimization of new or existing products to support revenue growth and profits of the corporation. Typical tasks for this position include (but are not limited to) the following: Monitor product quality to ensure compliance to standards and specifications. Develop an understanding with supervision of the fundamentals of coatings technology. Compile results of tests and analyses. Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results. Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits. Prepare paint batches for products and following standardized formulas, or create experimental formulas. Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. QUALIFICATIONS: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred. Skills Science - Using scientific rules and methods to solve problems. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Mathematics - Using mathematics to solve problems. Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Time Management - Managing one's own time and the time of others. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. DESCRIPTION OF POSITION DUTIES/TASKS: Satellite Hazardous Waste Accumulation Production tank/Cleaning/filling 1.
Production Quality Lab Technicians may have to dispose of product samples, line flush, off-spec product, or expired product retain samples.
This waste material is transferred to the hazardous waste satellite accumulation drum. 2.
Production workers clean equipment and tanks pre-rinse, wipe, scrub, and final rinse surfaces using wash solvent, brushes and rags.
Dirty solvent is transferred to the satellite accumulation area. 3.
Transfer used wash solvent to the satellite accumulation drum or tank. 4.
Ensure hazardous waste storage or accumulation containers remain sealed except during the addition or removal of waste. 5.
Ensure Hazardous Waste storage containers are clearly labeled "Hazardous Waste." 6.
Care must be exercised when introducing waste into the satellite accumulation drum.
Do not drop on floor or area.
In the case of any spilled material, spills or drops shall be cleaned up immediately. 7.
When 55 gallons has accumulated, the satellite accumulation container must be moved to a permanent hazardous waste storage area within 3 days and relabeled "Hazardous Waste." REQUISITE SKILL, EDUCATION, OR OTHER QUALIFICATIONS: 1.
Knowledge and understanding of the chemical characteristics of the wastes which they are assigned to handle or control (i.e., flammability, toxics, incompatibilities, etc.). 2.
Type of protective equipment and clothing to be worn. 3.
Knowledge of what to do or who to notify in the event of a release, fire, or explosion. 4.
Knowledge of communication and alarm system. 5.
Know procedures for using facility emergency equipment. 6.
Predetermined responses and methods to control releases, fires, or explosions. 7.
Ability to shut down operations. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-13 14:10:53
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $30/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Maintenance Technician will be to keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs. Typical tasks for this position include (but are not limited to) the following: Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Follow checklists to inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install or repair wiring, electrical and electronic components, pipe systems, machinery, and equipment. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-13 14:10:52
