-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Two+ years related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-11-04 14:09:28
-
JOB DESCRIPTION
Tasks PROFILE: Typical tasks for this position include (but are not limited to) the following: Monitor machinery used in the production process and assist machine operators. Examine products to verify conformance to quality standards, BOM, and test. Lift raw materials, finished products, and packed items, manually or using non-motorized equipment. Stop machines when malfunctions occur, clear jams, and report unresolved malfunctions to a machine operator, lead, maintenance, and then management. Secure finished packaged items by gluing, stapling, wrapping, taping, or attaching fastener. Mark or tag identification on parts. Load and unload materials, product, or packaging from machines, containers, conveyors, and conveyances. Help team members by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment. Perform TPM (Total Productive Maintenance) per requirements.
May require recording information such as weight, count, time, scrap and date packaged. Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels to ensure all shifts requirements are met. Perform other duties as assigned. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Operation and Control - Controlling operations of equipment or systems. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Coordination - Adjusting actions in relation to others' actions. Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
WORK ACTIVITIES
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles). Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgement to determine whether events or processes comply with laws, regulations, or standards. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Shift: Monday - Thursday 5:45AM - 4:15PM, Friday: 2-3 hours on non-mandatory Fridays Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-04 14:09:28
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-04 14:09:11
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-04 14:09:01
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Two+ years related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-11-04 14:09:00
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: The Team Leader (Manufacturing) is proficient in all areas of production and efficiently & correctly performs all duties in addition to more complex maintenance and continuous improvement.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works under minimal supervision
Adjusts machines to achieve production goals
Collaborates with machine operators in production process
Assists in carrying out production growth strategy
Troubleshoots complex processing problems with little or no assistance
Actively participates in identifying and implementing continuous improvement initiatives
Determines priorities and creates procedures to meet objectives of the plant
Ensures maintenance is completed according to Preventative Maintenance Plan
Cross-trains on all production areas in the facility (i.e.
safety, production, equipment)
Sets production schedule based on plant and customer needs utilizing factors such as lead time and manufacturing efficiency
Supports and validates the work of machine operators by answering questions, preparing production lines, and providing general direction
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: 4+ years related experience and/or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Windows and MS Office products (Word, Excel, & Outlook)
Excellent organizational and communication skills (both written and verbal)
Positive team player
Knowledge of area operations and related safe work practices/procedures and demonstrated ability to coordinate work activities.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-11-04 14:08:53
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:07:56
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-03 22:09:30
-
CNC Programmer
Poole, Dorset
CNC Programmer Salary: £35,000£42,500
Got a knack for precision, a head for CAD/CAM, and an eye for detail? This CNC Programmer role might be right up your street.
Were working with a well-established manufacturing business in Poole that produces large, complex composite parts and tooling for high-profile clients across the marine, defence, and aerospace sectors.
Theyve been around for decades, continually investing in new tech, modern facilities, and the people who make it all happen.
Youll be joining a friendly, tight-knit engineering team covering manufacturing from initial programming through to finished components.
The company has a solid reputation for quality, teamwork, and offering real career stability within a growing, innovative environment and on the lookout for a solid CNC Programmer to join their ranks.
What youll be doing as a CNC Programmer:
- Writing and editing CNC programs using CAD/CAM software (Alphacam or similar)
- Creating work instructions, drawings, and cut or pack guides for machining and manual processes
- Designing jigs, fixtures, tooling, and shop aids to support production
- Working with CNC operators to verify and refine programs, ensuring accurate, efficient machining
- Assisting with estimating and costing for new projects
- Liaising with customers and suppliers, including occasional site visits
- Identifying and implementing improvements to machining processes and workflows
- Supporting compliance with Health & Safety, quality, and environmental standards
What youll need as a CNC Programmer:
- Minimum 2 years experience programming 3-axis CNC machinery (5-axis experience a big plus)
- Experience with Alphacam, Hexagon, or other major CAM software
- Confident with both 2D and 3D CAD
- Solid understanding of machining foam, wood, and textile materials
- Strong problem-solving skills and a proactive approach
- Great communicator who enjoys working as part of a team
Whats in it for you as a CNC Programmer:
- Competitive salary based on experience
- Work with advanced materials and cutting-edge CNC machinery
- Long-term career growth in a stable, expanding company
- Supportive environment where good ideas and initiative are valued
If youre an experienced CNC Programmer who wants to be part of a business that values precision, people, and progress, get in touch.
Call Hayden at Holt Engineering on 07955 081 482.
....Read more...
Type: Permanent Location: Poole,England
Start: 03/11/2025
Salary / Rate: £35000 - £42500 per annum
Posted: 2025-11-03 16:17:47
-
CNC Miller
Location: Andover
Salary: £15 £20 per hour (DOE)
Overview Were supporting a growing precision engineering business in Andover as they continue to expand their machining team.
With a brand-new automotive contract and long-term investment in modern equipment, this is a great opportunity for a skilled CNC Miller / Setter-Operator looking for stability, quality work, and a company that values traditional engineering excellence.
Responsibilities
- Set and operate CNC milling machines (Mazak, Heidenhain or Fanuc)
- Edit and adjust existing programs to meet precision requirements
- Produce high-quality components to tight tolerances
- Complete in-process and final quality inspections
- Meet production targets while maintaining accuracy
- Work closely with the team to ensure smooth workflow
- Perform basic machine maintenance and troubleshooting
Requirements
- Able to set/operate on Mazak, Heidenhain or Fanuc controls
- Comfortable with offsets, tooling changes, and editing programs
- Strong understanding of machining practices and materials
- Able to read and interpret engineering drawings
- Quality-focused mindset with solid problem-solving ability
- Willingness to work overtime when needed
Apply Now If youre a dedicated CNC Miller who takes real pride in precision work, this is a great chance to join a respected Andover manufacturer.
To apply, please send your CV or get in touch with Kate Taylor at Holt Engineering wed love to speak with an experienced CNC Miller ready for their next move. ....Read more...
Type: Permanent Location: Andover,England
Start: 03/11/2025
Salary / Rate: £15 - £20 per hour
Posted: 2025-11-03 10:56:06
-
JOB DESCRIPTION
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary:
Legend Brands is hiring for a CNC Machine Operator for our Prescott, AZ location.
Under general supervision, the CNC Machine Operator I/II is responsible to perform all machining operations required to produce finished products from a variety of raw materials such as stainless steel, aluminum, etc.
Essential Duties:
1-3 years CNC production experience - Level II classification requires prior experience in making program adjustments based on parts inspections and to perform a broader range of duties
Set-up and operate CNC machines in accordance with established procedures and guidelines
Use calipers, dial indicators and other measuring instruments to perform quality control checks on finished and in process parts
Select, mount, attach and calibrate a variety of attachments
Run production lots
Recommend changes to processes or procedures to improve quality and productivity
Follow schedule and organize work to ensure continuous supply of machined components to downstream assembly processes
Maintain a safe, organized work environment as well as cleanliness of equipment and the production area
Perform other related duties as assigned
Education and Experience:
1-3 years CNC production experience - Level II classification requires prior experience in making program adjustments based on parts inspections and to perform a broader range of duties
High School Diploma or equivalent required
Ability to operate machinery and hand tools
Self-starter that is interested in learning on the job
Basic math skills and reading comprehension
Computer skills
Strong attention to detail and problem-solving skills
Physical ability to stand for long periods
Basic understanding of manufacturing safety protocols
Hiring Range:
Between $20.00- $25.25 per hour DOE
Supervision Responsibility
None
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background screening
Accepting applications through 11/01/2025 or until filled.
Applications will be reviewed as received and on-going interviews will be conducted as necessaryApply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-10-31 22:10:01
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-31 22:09:57
-
JOB DESCRIPTION
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary:
Legend Brands is hiring for a CNC Machine Operator for our Prescott, AZ location.
Under general supervision, the CNC Machine Operator I/II is responsible to perform all machining operations required to produce finished products from a variety of raw materials such as stainless steel, aluminum, etc.
Essential Duties:
1-3 years CNC production experience - Level II classification requires prior experience in making program adjustments based on parts inspections and to perform a broader range of duties
Set-up and operate CNC machines in accordance with established procedures and guidelines
Use calipers, dial indicators and other measuring instruments to perform quality control checks on finished and in process parts
Select, mount, attach and calibrate a variety of attachments
Run production lots
Recommend changes to processes or procedures to improve quality and productivity
Follow schedule and organize work to ensure continuous supply of machined components to downstream assembly processes
Maintain a safe, organized work environment as well as cleanliness of equipment and the production area
Perform other related duties as assigned
Education and Experience:
1-3 years CNC production experience - Level II classification requires prior experience in making program adjustments based on parts inspections and to perform a broader range of duties
High School Diploma or equivalent required
Ability to operate machinery and hand tools
Self-starter that is interested in learning on the job
Basic math skills and reading comprehension
Computer skills
Strong attention to detail and problem-solving skills
Physical ability to stand for long periods
Basic understanding of manufacturing safety protocols
Hiring Range:
Between $20.00- $25.25 per hour DOE
Supervision Responsibility
None
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background screening
Accepting applications through 11/01/2025 or until filled.
Applications will be reviewed as received and on-going interviews will be conducted as necessaryApply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-10-31 22:09:43
-
JOB DESCRIPTION
As our Batch Maker, you're there to produce paint and related products by setting up, operating, or tending machines to mix or blend materials, such as chemicals, liquids, color pigments, explosive ingredients, or rust-proofing materials. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Stages and charges necessary raw materials into process flow tanks.
Follows batch work instructions in order to manufacture quality products. Prepares disperser and letdown tank for production, including any necessary equipment clean up. Monitors and controls high-speed disperser, mixer, pumps, flow meters and other instruments in order to make sure that a batch is produced according to work instructions. Adjust a batch, under QC guidance, until it is approved. Get batch tickets from floor supervisor and discuss with floor supervisor the best order.
Determine raw materials needed. Housekeeping - Clean up work area to 5S standards, takes out trash, participate in cycle count and inventory program. May assist in other departments such as filling, and material handling or help make sample batches Ensure work area is safe, clean and free of recognizable hazards, communicating all spills or other hazards to the shift supervisor Responsible for Dust collector cleanouts when required. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
High school diploma or equivalent One year of production experience Able to read batch tickets and prepare labels for products; basic math Able to operate high-speed dispersers and other operating equipment Ability to lift 50-100 pounds, read digital scales and flow meters Experienced forklift operator Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2025-10-31 22:09:28
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-31 22:09:25
-
JOB DESCRIPTION
As our Batch Maker, you're there to produce paint and related products by setting up, operating, or tending machines to mix or blend materials, such as chemicals, liquids, color pigments, explosive ingredients, or rust-proofing materials. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Stages and charges necessary raw materials into process flow tanks.
Follows batch work instructions in order to manufacture quality products. Prepares disperser and letdown tank for production, including any necessary equipment clean up. Monitors and controls high-speed disperser, mixer, pumps, flow meters and other instruments in order to make sure that a batch is produced according to work instructions. Adjust a batch, under QC guidance, until it is approved. Get batch tickets from floor supervisor and discuss with floor supervisor the best order.
Determine raw materials needed. Housekeeping - Clean up work area to 5S standards, takes out trash, participate in cycle count and inventory program. May assist in other departments such as filling, and material handling or help make sample batches Ensure work area is safe, clean and free of recognizable hazards, communicating all spills or other hazards to the shift supervisor Responsible for Dust collector cleanouts when required. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
High school diploma or equivalent One year of production experience Able to read batch tickets and prepare labels for products; basic math Able to operate high-speed dispersers and other operating equipment Ability to lift 50-100 pounds, read digital scales and flow meters Experienced forklift operator Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2025-10-31 14:10:00
-
Manufacturing Operative
Lincoln
£30,000 - £35,000 Basic + Stability + Global Brand Exposure + Rotating Shifts + Family Feel + Appreciation + Optional Overtime + Flexibility + Generous Pension + Low Staff Turnover + Immediate Start
Looking to build your career with a world-leading manufacturer supplying high-end giants such as BMW and Rolls-Royce? Join this secure and respected company as a Machine Operator, where you'll play a key role in producing precision-engineered components trusted by some of the biggest names in the industry.
Enjoy working in a modern, well-equipped facility with brand new machinery, where quality, teamwork and appreciation are at the heart of everything they do.
This is your chance to be part of a stable, growing business that combines the professionalism of a global manufacturer with the supportive culture of a family-feel company.
The Successful Manufacturing Operative Will Have:
*Previous experience operating manufacturing machinery or similar
*Experience working in a heavy industrial or engineering environment
*Forklift experience (advantageous)
*Commutable to the Lincoln areaThe Role Of The Manufacturing Operative Will Include:
*Operation of forge and precision manufacturing machinery
*Working to high quality standards producing components for leading automotive manufacturers
*Monday to Friday - 8 hour rotating shifts
*Site-based role in the Lincoln areaIf this role is what you are looking for then apply below or call Eran on 07458163044! Keywords: Manufacturing operator, manufacturing operative, forge operator, forging, metal, titanium, nickel, stainless steel, Press Brake Operator, Press Brake, Operator, Operating, Setting, Programming, CNC, Press Brake Machines, Bystronic, CNC Machines, Laser, Sheet Metal, Cutting, Manufacturing, Engineer, Engineering, ex military ,Military, Lincoln, Lincolnshire, Newark This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd is that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Lincoln, England
Salary / Rate: £30000 - £35000 per annum + Stability + 8 hour shift + Training
Posted: 2025-10-31 11:35:11
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-30 22:09:46
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-30 22:09:42
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-30 22:09:41
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE: No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-10-30 22:09:38
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: Assistant Process Operator in our Chemical plant located in Corsicana.
If you are a strong operation's professional with a proven track record of success working in chemical plants, we invite you to apply.
This is your opportunity to join a large growing company offering a competitive base salary, benefits and pension.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Complete work functions within Chemical production operations.
Responsible for the quality blending of finished products and the bulk, drum, and pail packaging of products.
Full understanding of Chemical Hazards specific to area assigned to, including PPE.
General forklift duties.
The core responsibility for blending and packaging of products demands the use of mechanical and electrical equipment such as pumps, mixing equipment, and automation control systems.
Completion and compliance of all safety initiatives and certification requirements including all near miss and incident reporting.
Accountable for the data entry of production tickets, good receipts, and shipping documentation.
Daily inspection of work area and monthly document reporting.
Ensure that a clean organized work environment is maintained at all times.
Assist with physical inventory counts and processes.
Compliance with all applicable ISO requirements.
Other duties as assigned by supervisor.
EDUCATION REQUIREMENT:
High school diploma or equivalent.
Preferred, 2-year Process Technology Degree.
EXPERIENCE REQUIREMENT:
Preferred, Manufacturing, Chemical or Technical experience 2+ years.
Preferred, Forklift experience certified.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Good Attendance record.
Able to Work 12-hour shift: Dupont Schedule, Day and Graveyard rotation.
Ability to work in the US without sponsorship.
PHYSICAL DEMANDS:
Ability to lift and carry 50 lbs.
Ability to bend, squat down, and reach above your head throughout the day,
Ability to climb stairs and ladders.
Must be able to wear fall protection, and work at heights.
Must be able to wear respirator approx.
2 hours per day and work in confined spaces.
Forklift experience certified.
24 hour Hazpower.
BENEFITS AND COMPENSATION:
The hourly starting rate for applicants in this position wage is $25.00 plus a $1.00 shift premium.
This amount is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
This position is also eligible for a 6% annual bonus.
This position will practice the DuPont work schedule.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-10-30 14:10:37
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: Assistant Process Operator in our Chemical plant located in Corsicana.
If you are a strong operation's professional with a proven track record of success working in chemical plants, we invite you to apply.
This is your opportunity to join a large growing company offering a competitive base salary, benefits and pension.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Complete work functions within Chemical production operations.
Responsible for the quality blending of finished products and the bulk, drum, and pail packaging of products.
Full understanding of Chemical Hazards specific to area assigned to, including PPE.
General forklift duties.
The core responsibility for blending and packaging of products demands the use of mechanical and electrical equipment such as pumps, mixing equipment, and automation control systems.
Completion and compliance of all safety initiatives and certification requirements including all near miss and incident reporting.
Accountable for the data entry of production tickets, good receipts, and shipping documentation.
Daily inspection of work area and monthly document reporting.
Ensure that a clean organized work environment is maintained at all times.
Assist with physical inventory counts and processes.
Compliance with all applicable ISO requirements.
Other duties as assigned by supervisor.
EDUCATION REQUIREMENT:
High school diploma or equivalent.
Preferred, 2-year Process Technology Degree.
EXPERIENCE REQUIREMENT:
Preferred, Manufacturing, Chemical or Technical experience 2+ years.
Preferred, Forklift experience certified.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Good Attendance record.
Able to Work 12-hour shift: Dupont Schedule, Day and Graveyard rotation.
Ability to work in the US without sponsorship.
PHYSICAL DEMANDS:
Ability to lift and carry 50 lbs.
Ability to bend, squat down, and reach above your head throughout the day,
Ability to climb stairs and ladders.
Must be able to wear fall protection, and work at heights.
Must be able to wear respirator approx.
2 hours per day and work in confined spaces.
Forklift experience certified.
24 hour Hazpower.
BENEFITS AND COMPENSATION:
The hourly starting rate for applicants in this position wage is $25.00 plus a $1.00 shift premium.
This amount is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
This position is also eligible for a 6% annual bonus.
This position will practice the DuPont work schedule.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-10-30 14:09:43
-
3 DAY WEEKENDS + 33 HOLIDAYS + 10% PENSION SCHEME + FREQUENT WORK SOCIAL EVENTS + STATE OF THE ART FACILITIES + VARIOUS HEALTH & WELLBEING PERKSEstablished over 100 years ago, this highly impressive engineering organisation has become a vital partner to their high-profile clientele.
Operating out of a state-of-the-art manufacturing facility, they currently employ over 120 people and produce bespoke high-end products for use in a variety of industries and types of facilities.They are currently in the process of investing over £2m in their Leeds facility to facilitate their ambitious growth plans over the next 12 months.
New product introductions will enable them to supply into brand new marketsThis organization is now in the process of introducing a new product line, which will create exponential growth and entry into brand new markets.This employer is based in LEEDS, meaning that the successful Machine Operator will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley.Key Responsibilities of the Machine Operator role:
Setting up and operating semi-automatic equipment to produce critical internal components
Working directly from datasheets & instructions to ensure that finished product meets specifications
Ensuring a tidy work area & space, reducing contamination to products
Working Hours of the Machine Operator: 37.5 Hours per week, spread across a rotating shift pattern:
Week 1: Monday to Friday - 06:00 to 14:00
Week 2: Monday to Thursday - 12:30 to 22:00
*
*YOU WILL START ON A DAY SHIFT WHILST TRAINING
*
*
In return, the Machine Operator will receive:
Annual Salary: £32,223.75 (inclusive of shift allowance)
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 10% Combined contribution
Various other benefits including 3x annual salary death in service, cycle to work scheme and frequent companywide social events
To apply for this role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information.3 DAY WEEKENDS + 33 HOLIDAYS + 10% PENSION SCHEME + FREQUENT WORK SOCIAL EVENTS + STATE OF THE ART FACILITIES + VARIOUS HEALTH & WELLBEING PERKSEstablished over 100 years ago, this highly impressive engineering organisation has become a vital partner to their high-profile clientele.
Operating out of a state-of-the-art manufacturing facility, they currently employ over 120 people and produce bespoke high-end products for use in a variety of industries and types of facilities.They are currently in the process of investing over £2m in their Leeds facility to facilitate their ambitious growth plans over the next 12 months.
New product introductions will enable them to supply into brand new marketsThis organization is now in the process of introducing a new product line, which will create exponential growth and entry into brand new markets.This employer is based in LEEDS, meaning that the successful Machine Operator will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley.Key Responsibilities of the Machine Operator role:
Setting up and operating semi-automatic equipment to produce critical internal components
Working directly from datasheets & instructions to ensure that finished product meets specifications
Ensuring a tidy work area & space, reducing contamination to products
Working Hours of the Machine Operator: 37.5 Hours per week, spread across a rotating shift pattern:
Week 1: Monday to Friday - 06:00 to 14:00
Week 2: Monday to Thursday - 12:30 to 22:00
*
*YOU WILL START ON A DAY SHIFT WHILST TRAINING
*
*
In return, the Machine Operator will receive:
Annual Salary: £32,223.75 (inclusive of shift allowance)
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 10% Combined contribution
Various other benefits including 3x annual salary death in service, cycle to work scheme and frequent companywide social events
To apply for this role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Pudsey, England
Start: ASAP
Salary / Rate: £32223.75 - £33223.75 per annum + 33 Hols + 3 Day Weekends
Posted: 2025-10-30 14:06:09
-
JOB DESCRIPTION
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Production Maintenance Technician I/II/Senior/Lead is responsible for performing repairs, maintenance, and operational activities in support of manufacturing, The PMT helps maintain an inventory of manufacturing equipment, hand tools, molds, fixtures, and gauges, including spare parts.
The PMT establishes and maintains a preventive maintenance program.
participates in new equipment installations.
The PMT will assist manufacturing by assessing needs, researching and evaluating new tools and equipment, developing fixtures, and shop aids.
Work Schedule
Monday - Friday, 9am - 6pm
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Provide maintenance support for all process equipment, which will entail repair of down equipment and the coordination of various maintenance projects.
Analyze, troubleshoot and diagnose equipment, machines, and process related problems.
Perform maintenance, fabrication, adjustment, and repairs on all machinery and equipment.
Develop and review spare parts lists and inventory, order repair parts and tools, and keep accurate maintenance records utilizing Limble or other PMT programs.
Improve preventative maintenance plans including procedures with instructions for operator preventative maintenance.
Perform scheduled preventative maintenance activities.
Install, set up, evaluate and make recommendations regarding new/existing equipment.
Make modifications to equipment to optimize performance.
Coordinate fabrication of fixtures and shop aids.
Ensure that manufacturing systems meet health, safety, and environmental management requirements.
Perform other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
High School Diploma or GED required.
___________________________________________________________________________
Production Maintenance Technician I
Production Maintenance Technician I is the entry-level classification in the Production Maintenance Technician series and is intended for individuals with limited or no related work experience.
Employees in the classification receive on-the-job training and experience in the maintenance of process equipment.
As experience and proficiency are gained, assignments will become more varied and difficult; supervision become more general rather than direct.
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire:
Basic understanding of electrical, hydraulic and other systems, knowledge of general maintenance processes and methods, performing necessary equipment repairs, and working knowledge of hand tools and problem-solving skills.
This level requires the following certifications be initiated within six (6) months of hire:
LOTO certified, Forklift certified, Fall protection certification
The Production Maintenance Technician I will receive close instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
______________________________________________________________________________
Production Maintenance Technician II
This is the next level of the Production Maintenance Technician series and is required to have a minimum of 5 years of previous experience and working knowledge and competent demonstration of the following:
Solid understanding of pneumatic /electrical drills, grinders, routers, and motors.
Solid understanding of electrical, hydraulic and other systems, general maintenance processes and methods, power tools, welders and machine shop equipment.
Solid problem-solving skills including equipment breakdown, performing repairs and installation.
Previous welding experience preferred.This level requires the following certifications:
LOTO certified, Forklift certified, Fall protection certificationThe Production Maintenance Technician II performs broader range of duties, proven skillset to fully perform PMT responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
The Production Maintenance Technician II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required.
Knowledge of Lock Out/Tag Out and PPE.
Knowledge of methods, practices, materials, tools, and equipment used in the repair and maintenance of machinery and equipment or the ability to quickly learn processes and to problem solve.
Skill in verbal and written communication.
Skill in problem-solving.
Skilled at manufacturing shop math skills.
Ability to work in confined spaces and wear a silo harness.
Ability to communicate and comprehend in English, both verbal and written.
Ability to use independent discretion and judgement within organizational values, policies, and procedures.
Ability to follow directions.
Ability to work overtime.
Ability to pass a pre-employment background check.
Hiring Range
Between $22.00 - $31.50 per hour
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-10-29 14:09:15
