-
Electronics Design Engineer required to join an existing, successful and growing team.
You will have an Electronics degree and circuit design experience ideally in DC power systems.
Key Skills
Complex mixed signal analogue and digital system Design.
Analogue experience ideally creating power electronics and DC-DC
converter systems.
Practical electronics skills, such as fine pitch surface mount soldering and test equipment applications.
Low speed digital logic systems using communication interfaces RS485, I2C, SPI, CAN, etc.
Microprocessor based hardware system design.
....Read more...
Type: Permanent Location: Ash Vale, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £65000 Per Annum None
Posted: 2025-09-07 15:51:55
-
JOB DESCRIPTION
ESSENTIAL JOB FUNCTIONS:
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
The primary result expected from the Process Engineer is to control internal processes to manufacture paint and paint products by defining and analyzing the manufacturing process of both milling and filling operations for improvement in quality, safety, and efficiency, and creating, improving, and maintaining manufacturing Process Instructions (PI) and salvage/rework integration.
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following: Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Science - Using scientific rules and methods to solve problems. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. Technology Design - Generating or adapting equipment and technology to serve user needs. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Mathematics - Using mathematics to solve problems. Writing - Communicating effectively in writing as appropriate for the needs of the audience.
WORK ACTIVITIES
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems. Analyzing Data or Information - Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information. Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job. Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work. Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data. Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions. Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-05 15:10:44
-
JOB DESCRIPTION
ESSENTIAL JOB FUNCTIONS:
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
The primary result expected from the Process Engineer is to control internal processes to manufacture paint and paint products by defining and analyzing the manufacturing process of both milling and filling operations for improvement in quality, safety, and efficiency, and creating, improving, and maintaining manufacturing Process Instructions (PI) and salvage/rework integration.
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following: Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Prepare estimate of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Develop processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Science - Using scientific rules and methods to solve problems. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. Technology Design - Generating or adapting equipment and technology to serve user needs. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Mathematics - Using mathematics to solve problems. Writing - Communicating effectively in writing as appropriate for the needs of the audience.
WORK ACTIVITIES
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems. Analyzing Data or Information - Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information. Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job. Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work. Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data. Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions. Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-05 15:10:42
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-09-05 15:10:18
-
JOB DESCRIPTION
DAP is looking to hire Process Engineer for our Baltimore Plant.
Responsibilities
Provide process engineering support for raw materials, compounding, production, and packaging functions to improve safety, and support the MS 168 continuous improvement process.
Production Support
Support daily production needs through process troubleshooting, experimentation and support for production requirements.
Continuous Improvement
Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) accordingly
Capital Plan
Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant.
Ensure completion of projects within budgets.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
MS 168
Support the tier meeting process by the implementation and analysis of data collection and visual management systems.
Environmental Program reporting
Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Requirements:
Bachelor's degree in mechanical, Electrical, or Industrial engineering
2+ years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills.
PC usage with MS Office Suite (AutoCAD experience a plus), strong interpersonal skills, good communication skills both written and verbal.
Benefits:
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$75,000 to $90,000 per year
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-09-05 15:10:16
-
Are you an Embedded Software Engineer - C/C++ looking to work for a company that makes products that save lives.
If so, then this is the job for you! My client's office is based in Rochester, Kent, commutable from Gravesend, Dartford, Bexleyheath, Sittingbourne, Maidstone, Ashford, and Sevenoaks and offers flexible/hybrid working.
In this job you will design and develop application software and embedded firmware in C and C++ for future products and assist with the support and enhancement of my clients existing product portfolio.
In this Embedded Software Engineer - C/C++ job based in Rochester, Kent you will be responsible for:
- Design and develop embedded software using Embedded C
- Work with FreeRTOS to develop real-time, low-level firmware
- Interface directly with hardware, sensors, and microcontroller peripherals
- Contribute to system integration, debugging, and testing
- Collaborate with cross-functional engineering teams to deliver high-quality products
To apply for this Embedded Software Engineer - C/C++ job based in Rochester, Kent you must have a combination of the following skills:
- Proven experience as an Embedded Software Engineer
- Strong hands-on experience with Embedded C and FreeRTOS
- Solid understanding of microcontroller-based systems and real-time constraints
- Familiarity with low-level hardware interaction and debugging tools
- Experience in a safety-critical or regulated environment is a plus-
If you are interested in this Embedded Software Engineer - C/C++ job based in Rochester, Kent please call Ricky Wilcocks on 01582 878810 or 07931788834 or email RWilcocks@redlinegroup.Com to apply or discuss alternative jobs. ....Read more...
Type: Permanent Location: Rochester, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2025-09-05 00:00:02
-
We are seeking an experienced Product Quality Engineer to play a key role in ensuring the quality, compliance, and reliability of end-to-end satellite communication systems.
This role covers product assurance across design, manufacturing, integration, testing, and launch phases, working closely with internal teams, suppliers, and customers.
Based in London with a very attractive hybrid working arrangement, this will be a 12-month contract (extension likely).
The rate is negotiable dependant on experience (inside IR35).
What youll do:
- Lead programme-level product assurance activities across hardware, software, and systems.
- Develop and implement assurance plans in line with AS9100, ISO 9001, and ECSS standards.
- Collaborate with engineering, manufacturing, suppliers, and partners to ensure compliance and delivery.
- Oversee supplier quality, materials, processes, inspections, and audits.
- Drive risk management, root cause analysis, and continuous improvement initiatives.
What youll need:
- Bachelors degree in engineering (electronics, aerospace, mechanical/materials, or similar).
- 5+ years experience in product assurance on space projects (ESA, UKSA or similar).
- Strong knowledge of AS9100, ISO 9001, and ECSS standards.
- Experience working with and managing suppliers and vendors.
- UK or EU (27) Citizenship required.
What will help you succeed:
- Excellent communication and stakeholder management skills.
- Ability to balance independent work with team collaboration in a fast-paced environment.
- Strong organisational skills and attention to detail.
- Willingness to travel (1015%).
If youre ready to apply your product assurance expertise to cutting-edge space programmes, wed love to hear from you.
RW ....Read more...
Type: Contract Location: London,England
Start: 04/09/2025
Duration: 12 Months
Salary / Rate: Competitive
Posted: 2025-09-04 14:41:06
-
Highly technical electronic hardware product manager required to own an intelligent electornic device product development roadmap for a world leader in high performance high value products.
Instrumentation focus is high value cameras which work in tandem with very clever cloud services.
As Hardware Product Manager you will help define the direction and development of the companies electronics research, development and New Product Innovation which includes embedded software.
The ideal candidate will have a strong background in electro mechanical engineering with some product management experience.
Experience with production manufacturing techniques, optics, broadcast standards and embedded software would be distinct assets.
Bachelor???s degree in a related field such as Engineering, Design or a closely aligned field.
Product management experience
Electromechanical design.
Optics and PCs.
Embedded software, broadcast standards and RF is desirable
Responsibilities
The Product Team have internal and external client facing duties.
Outward facing responsibilities include marketing and trend analysis, conference attendance and pre sales assistance including product demonstrations and product rollouts. ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2025-09-03 21:11:57
-
We are looking for a Senior Electronic Design Engineer to join development team in Oxford.
Reporting to the Hardware Development Manager
Key Responsibilities
Electronic Design of a range of hardware products, calibration devices and synchronisation and networking equipment.
Working alongside, and sometimes leading, teams comprising of electronic, mechanical and software design engineers in the creation of high performing and cost effective solutions.
Key skills
Key requirements are high speed digital design, a working knowledge of analogue design and experience of developing products for manufacture with an emphasis on DFM/DFT.
A working knowledge of VHDL/FPGAs, image sensors, optics, Ethernet and RF Design would be advantageous. ....Read more...
Type: Permanent Location: Bicester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £65000 Per Annum None
Posted: 2025-09-03 21:09:54
-
Exciting opportunity help build and manage a hardware roadmap and vendor integration for a world leader in developing high-performance software and hardware products for engineering, virtual reality and medical industries.
Hardware product focus is high value cameras which work in tandem with very clever cloud services.
As Product Manager for Hardware and Integration you will help define the direction and development of all hardware products including embedded software.
The ideal candidate will have a strong background in electro mechanical engineering with some product management experience.
Experience with production manufacturing techniques, optics, broadcast standards and embedded software would be distinct assets.
Bachelor???s degree in a related field such as Engineering, Design or a closely aligned field.
Product management experience
Electromechanical design.
Optics and PCs.
Embedded software, broadcast standards and RF is desirable
The Team
The Product Team consists of Senior Product Managers, Product Managers and Product Specialists with strong technical backgrounds and a high level of domain knowledge.
They are responsible for proposing, road mapping, releasing and maintaining products within a defined market sector.
These products include software, input to hardware and accessories, and product documentation that constitute an end user solution.
Technical Authoring is also part of the Product Team.
Responsibilities
The Product Team have internal and external client facing duties.
Outward facing responsibilities include marketing and trend analysis, conference attendance and pre sales assistance including product demonstrations and product rollouts. ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2025-09-03 11:07:09
-
Opportunities at multiple UK sites (hybrid working): Somerset, Midlothian, Lincolnshire, Essex, Hampshire, Gloucestershire, Tyne and Wear.
Are you ready to shape the future of cutting-edge Electronic Warfare and Radar systems? Our partner are growing their systems engineering capability and currently hiring at multiple levels Senior, Lead, and Principal Systems Engineers to support the development of advanced defence technologies.
Join a collaborative, multidisciplinary team driving the development of next-generation electronic systems and contribute across the full engineering lifecycle, from requirements definition to system verification.
UK citizenship and eligibility for full security clearance required.
What Youll Be Doing:
- Define and manage system and sub-system requirements using industry-standard tools (e.g., DOORS)
- Develop and implement requirements management and verification plans
- Ensure traceability from high-level system requirements to sub-system level
- Support the generation and review of verification evidence and compliance documentation
- Collaborate across disciplines including software, hardware, and systems teams
- Contribute to the design and integration of advanced RF, radar, and electro-optic systems
What Youll Bring:
- Proven experience in systems engineering across the full lifecycle
- Strong skills in requirements definition, flow-down, and verification
- Expert-level or proficient in DOORS and requirements configuration
- Familiarity with engineering tools such as Atlassian suite, Cameo Systems Modeler, or MATLAB
- Understanding of EW, RF, Radar, or electro-optical system design
- Excellent communication skills and ability to work effectively across engineering teams
Opportunities Across Levels:
- Senior Systems Engineers Contribute technically and support project delivery
- Principal Systems Engineers Drive system architecture, strategy, and technical leadership
- Lead Systems Engineers Provide technical direction and mentor junior staff
Join a team at the forefront of defence technology innovation, where you can take ownership of challenging projects, collaborate with experts, and grow your career at the level that suits your experience.
Apply today and be part of building tomorrows defence capabilities.
....Read more...
Type: Permanent Location: United Kingdom,United Kingdom
Start: 03/09/2025
Salary / Rate: £50000 - £80000 per annum
Posted: 2025-09-03 08:14:04
-
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team.
As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master's or Bachelor's degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude.
Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc100000 - Swiss Franc130000 per annum
Posted: 2025-09-03 02:07:39
-
An exciting opportunity has arisen for an Electronics/Electrical Engineer based in Worcestershire, to join a bespoke electronic design and manufacturing services company.
This is a key position offering variety, technical challenge, and long-term career progression in a growing company.
The ideal Engineer should have a good knowledge of circuit design, both analogue and digital, at a schematic and board level, as well as a good working knowledge of C.
Ideally, you would also be at home using 3D packages to design injection moulded plastic or folded metal enclosures.
Ideal skills/experience of the Electronics/Electrical Engineer based in Worcestershire
Good knowledge of C programming language
Knowledge of embedded systems and their benefits and limitations
Knowledge of both digital and analogue electronics
Experience laying out circuit boards
Experience with Microchip devices and their IDE (MPLAB X)
Experience with Eagle
Experience with Fusion 360
Experience with CAN and other similar communications protocols
Exposure to prototyping hardware such as 3d printers and laser cutters
The successful candidate must be an adaptable, enthusiastic individual with extensive experience working for a similar kind of electronics company; however, those with some experience that show the right aptitude and interest will also be considered.
To apply for this Electronics/Electrical Engineer based in Worcestershire role, please send your CV to:
Blongden@redlinegroup.Com or call 01582 878841 / 07961 158 773. ....Read more...
Type: Permanent Location: Worcestershire, England
Start: ASAP
Salary / Rate: £30000 - £50000 per annum
Posted: 2025-08-29 10:16:50
-
Power Electronics Design Engineer
Location: Somerset
Our client is looking for an experienced Power Electronics Design Engineer to join their team, playing a key role in designing, developing, and supporting advanced power electronics systems for cutting-edge electrical applications.
This exciting opportunity involves working on new power system designs, improving existing products, and collaborating with cross-functional teams to deliver high-quality solutions.
Key Responsibilities for the Power Electronics Design Engineer job based in Somerset:
Design and develop power electronic systems including switch mode power supplies (buck, boost, flyback), thyristor controllers, and wide bandgap semiconductor technologies such as GaN, SiC, and IGBT.
Research and innovate in charging technologies, battery management systems (BMS), power control, conversion, and power management.
Develop new power electronics products aligned with business and technical requirements.
Qualifications and Experience Required for this Power Electronics Design Engineer job based in Somerset:
Degree in Electrical and Electronic Engineering or related disciplines.
Proven experience designing power electronic systems with examples involving switch mode supplies, thyristor controls, GaN, SiC, or IGBT technologies.
Experience with charging technologies, BMS, power control, conversion, and power management solutions, including relevant project examples.
Hardware design experience including analogue/digital circuits, schematic capture, and PCB layout (OrCad preferred).
This is an exciting opportunity to be part of an innovative and growing team, working with advanced power electronics and power systems.
If you have the skills and experience and are ready for a challenging and rewarding role, we want to hear from you!
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information. ....Read more...
Type: Permanent Location: Somerset, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2025-08-29 09:48:56
-
We are looking for an experienced Electrical Control Engineer.
You will support the integration of telemetry systems, working on design, testing, installation, and commissioning.
This role involves collaborating with engineers and clients to develop efficient and reliable solutions.
Key Responsibilities
Integrate telemetry systems with hardware and software solutions.
Design, test, install, and commission electrical control systems.
Create and maintain technical documentation and schematics.
Conduct site surveys and provide technical support.
Collaborate with the team to optimize solutions and ensure quality standards.
Essential Requirements
18th Edition Wiring Regulations and NVQ Level 3 in Electrical Installations.
Proven experience with control systems and electrical installations.
Proficiency in interpreting electrical diagrams and using AutoCAD.
Experience with PLC or RTU and telemetry outstations.
Full UK driving license and ability to gain SC clearance.
City and Guilds 2391 and 2395 Inspection and Testing qualifications. ....Read more...
Type: Permanent Location: Stoke-on-Trent, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £52000 Per Annum None
Posted: 2025-08-28 23:04:15
-
You will be working on projects in the Defence, Avionics and Automotive industries.
The ideal candidate is passionate about computer technology and embedded software development and enjoys hands-on projects such as building computers.
Requirements
Degree in Computer Science or related field.
At least 5 years of experience in Defence, Avionics, Automotive, Medical industries
Strong knowledge of computer hardware (GPUs, Memory, Processors) and computer systems (Protocols, Networking, Secure BOOT).
Experience with Embedded Software Development and low-level coding (Drivers, I2C, SPI, CAN, Ethernet, USB, Serial).
Experience with UML-based design tools and programming languages (C, C++, Python, JavaScript).
Knowledge of Bare Metal, Linux, and RTOS systems
Understanding of Automated Testing and regulatory frameworks (DO178C, IEC61508, MISRA, C++).
Strong documentation and reporting skills. ....Read more...
Type: Permanent Location: Letchworth Garden City, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £450000 Per Annum None
Posted: 2025-08-28 22:10:00
-
Embedded Software Engineer required with experience in Aerospace, Defence, Avionics, Automotive, Medical or similar domains who understand low level hardware or computer driver development.
Requirements
Embedded SW Development commercial experience of low level coding.
Computer hardware experience of GPUs, Memory, Processors and drivers.
Over 5 years commercial post graduate experience in Aerospace, Defence, Avionics, Automotive, Medical or similar domains
C, C++, Python, JavaScript
Bare Metal, Linux, and RTOS target platform experience.
Git or similar understanding.
Responsibilities
Writing low level code Drivers, I2C, SPI, CAN, Ethernet, USB, Serial and related.
Embedded software Bare Metal, Linux, and RTOS systems design and development, ideally VxWorks.
Agile, Waterfall, DevOps collaboration across the software development life cycle.
UML, Git, automated test, software verification etc. ....Read more...
Type: Permanent Location: Letchworth Garden City, England
Start: ASAP
Duration: Permanent
Salary / Rate: £50000 - £75000 Per Annum None
Posted: 2025-08-28 22:08:55
-
C++ programmer required to join a cutting-edge systems development team producing high-quality, modern, elegant and robust code.
You would typically be working in a team of three or four developers and computer vision, applications, hardware and QA teams.
Experience
C++ expertise on challenging projects.
C++11-20, STL, Boost Asio, Qt or QML, Python, C#.
Multi-threading, Networking, Optimization, OpenGL, Computer Vision.
Embedded Software Development.
Integration of Cloud Services AWS or Azure.
Jenkins, Game Engines, Animation Tools
Responsibilities
Creating high performance, scalable application software.
Developing our highly parallel real-time processing frameworks.
Writing code for interfacing with both Vicon and third-party hardware.
Implementing APIs, protocols and plugins for integration with other systems.
Designing GUIs and data visualization tools. ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2025-08-28 20:30:33
-
Junior or Graduate level Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control (relays, triacs, stepper motors, etc.) and user interfaces.
Technical Skills
8, 16 or 32 bit microcontrollers
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C
EMC compliance
Interaction of electro-mechanical products/mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £38000 Per Annum None
Posted: 2025-08-28 20:07:15
-
Senior Hardware Design Engineer required to join a team creating cutting edge hardware products.
VHDL / Verilog for FPGA experience is essential implementation of algorithms, high speed digital design and experience in developing products for manufacture.
Key skills
FPGA tools and technologies such as Microchip, Xilinx, SoC, Modelsim, Matlab and Simulink.
FPGA design and verification in VHDL, requirements capture, simulation, synthesis, place & route, and timing analysis.
Communication protocol knowledge, DSP or VLSI maths functions.
System on Chip or SoC design targeting FPGA or ASIC. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £50000 - £78000 Per Annum None
Posted: 2025-08-28 19:07:56
-
Electrical Machine Principal Design Engineer required to take responsibility for technology specification, control and integration into fully electric automotive vehicles.
You will provide novel motor systems into powertrain and vehicle performance technology simulation, selection and verification supporting electrical machine hardware and control decisions at powertrain and vehicle level.
Skills, qualifications and experience.
Degree or equivalent in Automotive, Electrical or Electronics Engineering.
Electrical Machine design experience
Electrical Machine technologies automotive integration into Hybrid and BEV applications.
Electromagnetic theory of electrical machines and motor control.
Electrical machine performance, NVH, cost etc.
Electrical machine thermal management.
Motor inverter design and motor control.
Electrical machine power electronic drives.
CAN/ CAN FD
Matlab or Simulink, Mathcad, Motorcad, Fluxmotor to accurately model electrical machine and system performance.
Hardware test case design and test equipment, oscilloscope, etc.
EMC and reliability.
Automotive Powertrain Control Development.
Role responsibilities
Electrical Machine technology leadership.
Lead and generate Electrical Machine Technical specification.
Lead Electrical Machine Simulation.
Lead Electrical Machine functional test specification
Support the development and delivery of electronic control architectures for diverse variants of powertrain architecture including hybrid, BEV ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £95000 Per Annum None
Posted: 2025-08-28 18:49:45
-
Embedded Digital Electronics Design Engineer required to design military aerospace technology products.
You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence.
....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-08-28 18:42:41
-
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-08-28 18:22:55
-
Application and Systems Developer required to design and implement equipment interface applications and information processing recovered from complex robotic instruments.
Key experience required
Windows development experience of Visual Studio .Net (C# and/or VB) and C/C++.
Interfacing with hardware, embedded development and protocols.
BSc or equivalent in Computer Science or related Engineering/Scientific subject.
Windows Forms (Winforms) applications.
Agile software development methodologies or equivalent
Source control systems such as Subversion/Git
Continuous integration / continuous delivery systems.
Interfacing techniques and communication protocols.
You will work across whole software lifecycle, from capturing requirements, developing code,
controlling equipment, analysing results, supporting users of the final software and the practical
application of the results.
Duties
Software development, designing and developing solutions for acquiring data, controlling equipment, logging and analysing results.
To participate in technical reviews such as code review and document reviews.
....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £60000 Per Annum None
Posted: 2025-08-28 18:15:47
-
The Embedded Software Engineer designs and implements measurement and control embedded firmware.
You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages ideally with some C++.
Hardware and software tools including emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components.
Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition & logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms.
....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: permanent
Salary / Rate: £30000 - £48000 Per Annum None
Posted: 2025-08-28 18:11:29
