-
The Power Electronics Engineer is responsible for power supply design and power electronics (power conversion, motor control and motor drive).
Skills
Power Supply Design Experience, ideally to Senior or Principal level
Strong lab experience in debugging complex power modules (hand-on experience)
Familiar with multiple power supply topologies (flyback, half bridge, full bridge,???)
Strong in experience in design for cost, manufacturability, testability and reliability
Experience in firmware development is a big plus (digitalization migration)
Role Responsibilities
Assist in identifying and organizing requirements for power electronics applications.
Apply relevant usability procedures and principles.
In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure.
Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,???.)
Design magnetics with associated simulation.
Magnetics needs to be outsourced using ???built to print??? manufacturing file methodology (to allow double sourcing)
Build prototypes, products and systems suitable for testing.
Set up and run lab experiments.
Design and implement tests, document results and develop customer presentations.
Provide timely corrective actions on defects.
Release test reports of all prototypes built using the standard Power CPE engineering test platform.
Help develop a power module building block library for high temperature applications.
....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £85000 Per Annum None
Posted: 2025-08-23 14:10:11
-
The Manufacturing Engineer is responsible for complex electronic assemblies.
Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics.
Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g.
First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g.
through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £46000 Per Annum None
Posted: 2025-08-23 14:08:07
-
Electrical CAD Designer is responsible for preparing and maintaining engineering or sustaining project design layouts and PCB???s.
Skills
Several years experience in a relevant or similar role in a Technology or Manufacturing Centre
Electrical CAD PCB Design.
Electronics Design.
Product File Management.
Cadence or Altium Software ideal.
What you will be doing
Function as a design engineer for routine/correction.
Depending on seniority, use the CAD system to prepare and maintain simple to average complexity electrical and electronic layouts, average complexity mechanical and highest complexity electrical and electronic product and production drawings and other related documentation from layouts, sketches or verbal instruction.
Responsible for the accuracy of assignments, except for design features that are the responsibility of the project engineer.
Understand manufacturing processes and techniques, and interpretation of company standards and procedures.
Possesses basic knowledge of the mechanical and, depending on the seniority, partial to total knowledge of the electrical and electronic Product Line. ....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-08-23 14:03:03
-
Electrical Engineer required to provide innovative and cost-effective product reliability solutions by developing or evolving techniques, procedures or products.
Qualification requirement
Minimum BSc in Electrical Engineering or Mechatronics or equivalent.
Role Responsibilities
Analyse, design, develop and maintain products and assist in their commercialization
Build prototypes, products and systems suitable for testing.
Set up and run lab simulations.
Design and implement tests, document results and develop customer presentations.
Provide timely corrective actions on defects.
Produce analyses and mathematical models, and draw design conclusions based on those.
Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts.
Contribute to design standards and support design re-use.
Author technical reports, papers, articles, patents and presentations.
Share expertise via Eureka and special interest groups.
Expand informal network throughout the organization.
Keep abreast of novel technical concepts and markets.
Adopt new practices readily in order to develop innovative and low-cost products.
Maintain familiarity with company technology, organization and business. ....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £55000 Per Annum None
Posted: 2025-08-23 13:59:56
-
Mechanical Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g.
lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £55000 Per Annum None
Posted: 2025-08-23 13:53:44
-
Electrical Assembly Technician require to join an established large team of precision wiring assemblers.
High value low volume electronic device manufacturer is looking for Electrical Assembler to join their team.
Skills
General wiring
Crimping
Soldering, ideally precision soldering experience
The ideal candidate will have:
IPC Certification
Exposure to high value electronic device manufacturing.
My client will offer full and on-going training, career development and on-going support for the right individual. ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £23000 - £28000 Per Annum None
Posted: 2025-08-23 13:48:39
-
Auto Electrical Support Specialist Location: Huddersfield/Elland (easy access from M62) Salary: £44.000 Hours: Monday - Friday 8.30am - 5.00pm Contract: PermanentAn Automotive company that specialising in the supply, hire, and maintenance of specialist vehicles for sectors like logistics, distribution, ports, aviation, fire & rescue, industrial, road, and rail require a Auto Electrical Support Specialist.We're looking for a hands-on Auto Electrical Support Specialist to be the go-to expert for our engineers and service team.What you'll do as a Auto Electrical Support Specialist:
Provide expert technical support and training to our field engineers.
Diagnose and repair complex engine, electrical, and diagnostic issues.
Ensure top-quality service and safety standards.
Build strong relationships with colleagues and customers.
What you'll bring as a Auto Electrical Support Specialist:
City & Guilds Level 3 (or equivalent) in Vehicle Mechanical & Electronic Systems.
Proven experience in electrical diagnostics and repairs (HGV/specialist vehicles ideal).
Confident with the latest diagnostic systems.
Excellent communication and problem-solving skills.
Demonstrate substantial experience in Auto Electrical fault diagnosis.
Knowledge of current traffic laws.
Full UK driving licence.
Knowledge of HGVs (a plus).
Why join us? Play a key role in keeping our specialist fleet moving.
You'll use your expertise to solve tough problems, train others to your standard, and shape technical excellence in a supportive, growing team. If interested in the role of Auto Electrical Support Specialist, please contact Tony Gallagher at E3 Recruitment on 01484 64529 or 07927 587033. ....Read more...
Type: Permanent Location: Elland, England
Start: ASAP
Salary / Rate: Up to £44000.00 per annum
Posted: 2025-08-23 00:00:01
-
An exciting job opportunity has arisen for a Principal Electronics Design Engineer to join this Dynamic Design Consultancy based in Cambridge.
Our Cambridge based client develop innovative electromechanical devices from concept to production for multinational companies, in medical, healthcare, consumer, and industrial markets.
You will get to work on a wide range of different projects - some lasting several weeks and some lasting a few years.
The position of Principal Electronics Design Engineer job will be part of the Electronics team whose aim is to develop products that meet “customer excellence” standards and improve lives.
Requirements of the Principal Electronics Design Engineer job based in Cambridge:
A degree in Electronics, Electrical Engineering, Software, or Computer Science
Experience developing circuitry and control systems
Experience in Architecting and writing firmware in one or more of C, C++, Verilog or VHDL
Strong team player and collaborator
Experience in medical and life sciences sectors is highly desired
Experience in a design consultancy is highly desired
Benefits Package of the Principal Electronics Design Engineer job based in Cambridge:
12% Company Pension
25% discretionary bonus scheme
Hybrid working
Annual Training budget
Modern offices and on-site parking
This is an exciting job opportunity for a Principal Electronics Design Engineer looking for their next move and a variety of projects.
To apply for this Principal Electronics Design Engineer job based in Cambridge please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471181784. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £80000 - £100000 per annum
Posted: 2025-08-22 16:02:00
-
I have an exciting job opportunity for you as a Procurement Specialist, could this be your next move?
My client is a leader in the sourcing and resale of surplus electronic components.
They are now looking for a Procurement Specialist to join their growing team in York.
For the Procurement Specialist job in York, they are looking for someone with experience in:
Leading and developing a high-performing team
Procurement and sales of electronic components
Managing supplier relationships and strategic negotiations
Global supply chain and inventory operations
Using CRM systems to manage customer and sales information
Identifying new business opportunities and market trends
Desirable skills for this York based Procurement Specialist job:
Commercially minded with a proactive approach to growth
Strong numeracy and communication skills
Able to work both independently and collaboratively
Experience working in a fast-paced, target-driven environment
Hands-on approach to operations, logistics, and customer service
Experience with QC/RMA and pricing workflows
Must have experience in electronic components
If this opportunity as Procurement Specialist job based in York could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471181784 ....Read more...
Type: Permanent Location: York, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-08-22 16:00:45
-
I have an exciting opportunity for you as a Buyer - Electronics based in Mansfield, could this be your next move?
My client is a well-established leader in the Connector industry, known for delivering high-quality solutions to the aerospace, defence, and industrial sectors.
They are now looking for a Buyer - Electronics to join their experienced procurement team at their site in Mansfield.
For the Buyer - Electronics job based in Mansfield, they are looking for someone with experience in:
Purchasing components, connectors, harnesses, and associated hardware
Managing supplier relationships and negotiating pricing, lead times, and terms
Raising and managing purchase orders and tracking deliveries
Working closely with engineering and sales teams to fulfil technical requirements
Maintaining accurate records within procurement and ERP systems
Ensuring cost-effective procurement while maintaining quality and delivery standards
Desirable skills for the Buyer - Electronics job based in Mansfield:
Strong knowledge of electronic and electrical components
Experience working with MRP/ERP systems
Excellent communication and negotiation skills
Ability to work independently and manage multiple priorities
Analytical and detail-oriented with strong commercial awareness
Previous experience within aerospace, defence, or high-reliability sectors would be a bonus
If this opportunity as a Buyer - Electronics job based in Mansfield could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Mansfield, England
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2025-08-22 16:00:23
-
My client is the leading design and manufacturing company specialising in power supplies and associated electronics systems for the Defence and Aerospace industries.
They are currently looking for an Electronic Technician to join their team based in St Neots.
Key responsibilities of the Electronic Technician job opportunity based in St Neots:
Assemble mechanical and electrical sub-assemblies
Perform product testing for performance, safety, and compliance following Acceptance Test Procedures(ATP)
Diagnose and repair faults in both sub-assemblies and final products
Interpret engineering drawings and solder to IPC 610, and IPC 620 standards
Experience required for the Electronic Technician job opportunity based in St Neots
HNC in a relevant subject (desirable)
Experience in the electronics manufacturing industry
Familiarity with oscilloscopes, multimeters, and automated test equipment
If this Electronic Technician job opportunity based in St Neots could be of interest, send your CV to bwiles@redlinegroup.Com, or call Ben on 01582 878816 / 07471181784. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £25000 - £32000 per annum
Posted: 2025-08-22 15:59:21
-
Are you looking for an Electronic Test Technician job in Mansfield, working for a global leading supplier of connectors and cables, for the Defence & Aerospace industry?
The Electronic Test Technician job is based in Mansfield and is commutable from surrounding areas including Sheffield, Nottingham, and Derby.
Key Responsibilities and experience needed for the Electronic Test Technician job are as follows:
Fault finding to component level
Electronic testing
Understanding of RF
Test reports
If you have any specific questions about this Electronic Test Technician job based in Mansfield, please call Ben Wiles on 01582 878816 or 07471181784.
To apply email: bwiles@redlinegroup.Com ....Read more...
Type: Permanent Location: Mansfield, England
Start: ASAP
Salary / Rate: £28000 - £35000 per annum
Posted: 2025-08-22 15:58:45
-
Are you an experienced electronics design engineer looking to take the next step in your career? We're hiring a Principal Electronics Design Engineer to join our innovative and growing engineering team in Leeds.
Key Responsibilities of the Principal Electronics Design Engineer job in Leeds:
Lead the design and optimisation of analogue electronics, power systems, and switch-mode power supplies (SMPS).
Guide a team of engineers through complex design challenges, promoting innovation and technical excellence.
Oversee integration of control electronics, HMI, and LED lighting systems to ensure optimal performance and reliability.
Troubleshoot and resolve advanced issues related to power conversion, EMC, thermal management, and system integration.
Collaborate across departments to ensure seamless product development and integration.
Review and approve technical documents including schematics, PCB layouts, and test specifications.
Stay current with emerging technologies, conducting research to continuously improve designs.
Required Skills & Experience for the Principal Electronics Design Engineer job in Leeds:
Bachelor's degree in Electronics Engineering (Master's or PhD is a plus).
Extensive experience in electronics design, with hands-on skill in analogue circuit design and power electronics.
Proven leadership and mentoring capabilities.
In-depth knowledge of SMPS topologies (buck, boost, flyback, etc.).
Proficient in industry-standard tools (e.G., SPICE, Matlab, Altium).
Strong understanding of EMC compliance, thermal design, and safety standards.
Excellent communication, problem-solving, and organisational skills.
If this Principal Electronics Design Engineer job in Leeds could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: £50000 - £65000 per annum
Posted: 2025-08-22 15:58:02
-
Are you looking for a Senior Embedded Software role based in Newark-on-Trent? My client, a leading manufacturer of Human Machine Interfaces are looking for a Senior Embedded Software Engineer to join their site in Newark-on-Trent.
Key Responsibilities of the Senior Embedded Software Engineer job in Newark-on-Trent:
Lead the design and development of embedded software for HMI products.
Deliver and validate robust bare-metal firmware, optimised for performance and reliability.
Manage software specifications, technical reports, and documentation to professional standards.
Guide and mentor senior engineers and other team members.
Lead IP creation and support innovation initiatives across the company.
Provide technical input for commercial proposals, including cost and delivery estimates.
Take ownership of firmware change management, feature updates, and fault diagnosis.
Support cross-functional teams including production engineering, R&D, and test teams.
Conduct and support electrical testing and debugging activities.
Define and manage software tasks, ensuring timely project delivery in line with requirements.
Contribute to continuous improvement of software development processes and standards.
Required Skills for the Senior Embedded Software Engineer job in Newark-on-Trent:
Bachelor's or Master's degree in Computer Science, Electronics, or Computer Engineering.
Extensive experience developing embedded C firmware in electronics manufacturing environments.
Strong background in bare-metal development, peripheral configuration, and real-time control.
Solid understanding of layered software architectures and modular code design.
Proficient with communication protocols: SPI, I2C, I2S, UART, USB, CAN, Ethernet.
Comfortable with automated testing, unit testing, and implementing reusable code libraries.
Hands-on experience with Git, Jira, and modern software development workflows.
Proficiency with development environments and toolchains (e.G., IDEs, versioning systems, debugging tools).
Advanced skills in Microsoft Office (Excel, Word, PowerPoint, Outlook).
If this Senior Embedded Software Engineer job in Newark-on-Trent could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Newark, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2025-08-22 15:56:41
-
Holt Engineering is looking for a PCB Inspector for a growing manufacturing business in Fareham!
As a PCB Inspector you will play a pivotal role within the business, you will be working within goods in, stage and final inspection of electrical & electronic assemblies.
This role is temporary to permanent and paying £12.21- £14.50ph (DOE)
Working hours are Monday to Thursday 7:30 -16:30 and Friday 7:30 to 12:30.
Key Responsibilities for PCB Inspector
- Inspection of Electrical & Electronic Assemblies.
- Calibrated Tool control issuing & approval.
- Assist with First Article Inspection
- Assist in the resolution of quality-related problems.
- To work with the Quality Controller to develop, improve & maintain quality standards across the areas of responsibility.
- To work with the Quality Controller
- Proactively advise management of any issues
- Provide QA support as necessary.
- To assist the Quality Controller in the diagnosis of quality problems.
To be considered for this PCB Inspector role:
- IPC Trained would be advantageous but not essential
- Ability to read & understand complex Engineering drawings & instructions.
- Previous experience inspecting electronics is essential
- Structured and logical approach to problem-solving.
- Able to work independently as well as within a team
- Excellent communicator
- Good time management skills
Sounds like a good fit? Please call Sam on 07485 390946 or APPLY NOW for this advert! ....Read more...
Type: Contract Location: Fareham,England
Start: 22/08/2025
Duration: 12 weeks ongoing
Salary / Rate: £12.21 - £14.50 per hour
Posted: 2025-08-22 14:19:05
-
Holt Engineering is currently working with an innovative manufacturing company based in Fareham, which is on the lookout for an Electronic Assembler.
Duties for the Electronic Assembler:
- Working from technical drawings
- Supporting the production team with assembly workflow
- Assembly of PCBs
- Good attention to detail
To be successful in the Electronic Assembler role you must:
- Previously electrical manufacturing experience
- Previous assembly experience
- Have good attention to detail and be able to work to tight deadlines
For the successful Electronic Assembler you will receive:
- Competitive pay structure
- Early finish on Fridays
- On site parking
The working hours are: Monday to Thursday 7.30-16.30 and early finish on the Fridays 12:30
Paying between £12.21-12.75ph (depending on experience)
If youre looking to secure an Electronic Assembler position within a steadily growing business, then this job is for you!
Contact Sam at Holt Engineering on 07485 390946 or apply now through this advert.
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated. ....Read more...
Type: Permanent Location: Fareham,England
Start: 22/08/2025
Salary / Rate: £12.21 - £12.75 per hour
Posted: 2025-08-22 14:08:05
-
Are you a Stores Person looking for your next challenge?
Holt Engineering Recruitment are looking for a Stores Operative to join one of their engineering clients based in Havant.
As the Stores Person you will play a crucial role within the Stores, supporting the business in the upkeep and organisation of the onsite stores.
The key responsibilities for the Stores Operative role will include:
- Kit preparing for the production team
- Packing for distribution to production
- Be responsible for organising and maintaining the stores and all physical stocks
- Ensuring all parts are stored and issue correctly to avoid damage.
- Follow all Health & Safety guidelines
- Inputting data information into computers
- Following instructions for picking & packing
To be a successful Stores Operative you must:
- Have experience working within a electronic manufacturing stores (desirable)
- Have kitting or Picking & Packing experience
- High level of attention to detail
- Be PC literate
- Accurate data entry and stock checks experience
- Be able to read and follow instructions for picking & Packing
This is a temporary to permanent role, working a day shift Monday to Friday 8am - 4:30pm.
The Stores Person role is paying £12.21 - £12.50ph (Depending on Experience)
If you have the above experience and are looking for your next role please APPLY today or call Sam on 07485 390946 for more information. ....Read more...
Type: Contract Location: Havant,England
Start: 22/08/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £12.50 per hour
Posted: 2025-08-22 13:59:05
-
We have been instructed on an unmissable opportunity for an Electronics Patent Attorney to join a tenacious, highly successful IP practice that is continuing to grow and develop.
Based in Scotland, this firm is flexible on level, so if you're more senior, geography is no hurdle here, as this role can be undertaken remotely if you are comfortable working autonomously.
For those attorneys at finals standard or Associate level then your office presence will be required on a hybrid basis where the team can fully support you in situ.
With a strong focus on software, it's key too that your general electronics background is a solid one.
With exposure to the full range of responsibilities as an Electronics Patent Attorney, you'll be comfortable handling a wide range of duties whilst demonstrating excellent client care skills and being commercially astute.
Essentially, you'll be passionate about what you do and relish collaboration with colleagues and clients alike.
People are at the very heart of this business; each employee feels like they have a voice, and the business positively encourages people to bring their ideas to the table and run with them!
For a conversation in confidence, please do call Lisa Kelly on 0113 467 9793 or via: lisa.kelly@saccomann.com ....Read more...
Type: Permanent Location: England
Posted: 2025-08-22 11:43:36
-
We have been instructed on an unmissable opportunity for an Electronics Patent Attorney to join a tenacious, highly successful IP practice that is continuing to grow and develop.
Based in Scotland, this firm is flexible on level, so if you're more senior, geography is no hurdle here, as this role can be undertaken remotely if you are comfortable working autonomously.
For those attorneys at finals standard or Associate level then your office presence will be required on a hybrid basis where the team can fully support you in situ.
With a strong focus on software, it's key too that your general electronics background is a solid one.
With exposure to the full range of responsibilities as an Electronics Patent Attorney, you'll be comfortable handling a wide range of duties whilst demonstrating excellent client care skills and being commercially astute.
Essentially, you'll be passionate about what you do and relish collaboration with colleagues and clients alike.
People are at the very heart of this business; each employee feels like they have a voice, and the business positively encourages people to bring their ideas to the table and run with them!
For a conversation in confidence, please do call Lisa Kelly on 0113 467 9793 or via: lisa.kelly@saccomann.com ....Read more...
Type: Permanent Location: Scotland
Posted: 2025-08-22 11:41:48
-
Business Development Manager - Electronic Components (Remote)
Location: Remote with regular travel across the UK
An exciting opportunity for a Business Development Manager (Remote) to join a specialist UK-based distributor and manufacturer of high-reliability electronic components for defence, aerospace, rail, industrial, and other demanding sectors.
This role is ideal for a self-motivated sales professional with experience in technical B2B sales, looking to drive growth and develop relationships with OEMs, CEMs, and Tier 1 contractors nationwide.
Main Responsibilities of the Business Development Manager (Remote):
Identify, develop, and secure new business opportunities with OEMs, CEMs, and Tier 1 contractors
Research and target new sectors and applications for the company's distribution and manufacturing capabilities
Generate and qualify leads through cold outreach, networking, and attendance at industry events
Arrange and attend customer visits, product presentations, and technical discussions
Manage and maintain a healthy sales pipeline with accurate forecasting and reporting
Collaborate with product managers, internal sales, and engineering teams to deliver customer-focused solutions
Provide regular activity updates, KPIs, and progress reports to senior management
Requirements of the Business Development Manager (Remote):
Proven track record in B2B business development or technical sales, ideally within electronics or high-reliability industries
Strong communication and presentation skills, able to engage technical and commercial stakeholders
Self-motivated with the ability to manage a regional sales territory independently
Commercial awareness with strong negotiation and deal-closing skills
Full UK driving licence and willingness to travel, including visits to the company's HQ in Wales
To apply for this Business Development Manager role, please send your CV to:
Nking@redlinegroup.Com or call 01582 878 839 / 07961 158788 ....Read more...
Type: Permanent Location: Wales
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-08-22 10:39:20
-
Quality Engineer - Cambridge - Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge.
The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals.
Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation.
If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career.
However.
if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2025-08-22 10:30:23
-
An exciting opportunity has arisen for a Lead Systems Architect - Electronics to join an established and forward-thinking engineering team within a UK-based technology company located in Kent.
The successful Lead Systems Architect - Electronics will define, design, and oversee system architecture for new product development, ensuring seamless integration of mechanical, electrical, and software components.
The role balances technical, customer, and business requirements to deliver robust, scalable, and compliant products.
Key Responsibilities:
Establish and own the system architecture vision.
Translate requirements into system-level specifications.
Define interfaces between hardware, firmware, software, and mechanical components.
Lead trade-off studies, risk assessments, and validation planning.
Ensure scalability, modularity, and maintainability in designs.
Serve as the technical authority and primary point of coordination for system-level design
Technical Skills/Qualifications:
Bachelor's degree in electrical/systems engineering (Master's/PhD preferred).
10+ years in electronic product development; 3+ years in an architect/lead role.
Proven track record in electrical measurement equipment (e.g., Multimeters, oscilloscopes, analysers).
Strong knowledge of embedded systems, analogue (analog) /digital design, data acquisition, and signal conditioning.
Experience with SysML, MATLAB/Simulink, and version-controlled design workflows
This is a permanent position for a Lead Systems Architect - Electronics based in Kent, offering a fantastic opportunity to work on meaningful and technically varied projects in a supportive and technically rich environment.
If you're driven by innovation and take pride in engineering, we want to hear from you.
APPLY NOW to join a passionate engineering team committed to excellence.
Send your CV to blongden@redlinegroup.Com or call Brett on 01582 878841. ....Read more...
Type: Permanent Location: Kent, England
Start: ASAP
Posted: 2025-08-21 09:58:50
-
A leading provider of secure satellite communications and technical support services is seeking a Technical Service Manager to take ownership of high-priority UK Government support cases.
This is a key role supporting MOD satellite communication systems, ensuring that service delivery meets demanding SLAs and through-life performance expectations.
This position offers the opportunity to work at the heart of defence communications, managing technical escalations, driving resolutions, and working closely with engineering, project, and field service teams.
Key Responsibilities
- Manage and oversee all technical support cases related to MOD Commercial Satellite Communication Services.
- Act as the key point of contact for complex escalations, working alongside engineering, support, and project teams to resolve issues.
- Ensure service visits are coordinated for maximum efficiency, covering logistics, equipment use, and alignment with project or survey work.
- Collaborate with stakeholders to ensure support cases meet technical, commercial, and contractual obligations.
- Liaise with MOD authorities and internal teams, attending meetings and presenting status updates as needed.
- Track support trends using ticketing and monitoring systems and drive continual improvement initiatives.
- Maintain configuration control using secure systems and prepare technical documentation and case handover notes.
- Deliver training to 1st/2nd line support staff and onboard new Field Service Engineers.
Skills & Experience Required
- Royal Navy or MOD technical comms experience, particularly in COMSAT, MILSAT, MNE, and message handling systems.
- Technical knowledge of electrical/electronic systems, networking, and satellite communications.
- Ability to manage technical cases independently and communicate clearly with internal stakeholders and government customers.
- Proven problem-solving ability and ownership mentality.
- Strong documentation and organisational skills; confident using ticketing systems and standard office software.
- Eligible for or already hold DV Security Clearance.
- Knowledge of ITIL and wider MOD networks across land and sea is advantageous.
If you're technically sharp, operationally focused, and thrive in demanding defence environments, this is a fantastic opportunity to play a vital role in maintaining secure government communications. ....Read more...
Type: Permanent Location: Surrey,England
Start: 21/08/2025
Salary / Rate: Competitive
Posted: 2025-08-21 08:25:20
-
We are seeking an experienced Maritime Project Manager to lead and deliver critical implementation projects across the UK Ministry of Defence maritime domain.
You will be responsible for managing the successful integration of communications and networking equipment across platforms including the Royal Navy, Royal Fleet Auxiliary, and other government vessels.
This is an exciting opportunity to work in a fast-paced and highly collaborative environment, supporting some of the most mission-critical defence projects in the UK.
Key Responsibilities
- Manage multiple, concurrent MOD maritime installation projects from initiation to delivery.
- Produce Equipment Guidance Packages (EGP), Installation Guidance Packages (IGP), and Modification Leaflets based on engineering input and site surveys.
- Lead the Change Impact Assessment Process (CIAP) in collaboration with engineering and assurance teams.
- Oversee internal project reporting and represent progress at customer governance meetings.
- Coordinate with suppliers and subcontractors to ensure timely equipment delivery and integration.
- Track project schedules, manage risk, and ensure all dependencies are identified and resolved.
What You\'ll Bring
- Proven experience in project management, specifically with MOD or UK government departments.
- Hands-on involvement in UK MOD maritime electrical installation projects.
- Technical background with electrical/electronic systems, IT networking, or satellite communications.
- Strong documentation skills, ideally with experience writing EGPs, IGPs, and Mod Leaflets.
- Ability to manage multiple stakeholders, balance priorities, and drive delivery under pressure.
- DV (Developed Vetting) clearance, or the ability to obtain it.
What You\'ll Need
- Strong customer-facing approach with attention to detail and a flexible mindset.
- Project ownership mentality with sound judgement and problem-solving ability.
- Willingness to travel across the UK as required for site visits and installations.
- Familiarity with standard project reporting tools and MS Office applications.
Why Apply?
This is a high-impact role offering real responsibility on nationally important projects, working with dedicated professionals in the defence and communications sectors.
If you're proactive, technically fluent, and thrive in a complex delivery environment, wed love to hear from you.
....Read more...
Type: Permanent Location: Surrey,England
Start: 21/08/2025
Salary / Rate: Competitive
Posted: 2025-08-21 08:25:09
-
A leading maritime systems integrator is seeking a System Design Engineer to join their multidisciplinary engineering team.
This is a fantastic opportunity to work across high-impact defence and commercial projects, supporting the design and delivery of advanced communications and control systems for complex operational environments.
Key Responsibilities
- Produce high-quality electrical and mechanical drawings (2D/3D) for maritime, defence, and critical systems projects.
- Translate rough concepts into fully defined engineering drawings and STEP files to ISO and BS8888 standards.
- Contribute to system-level designs involving control panels, 19 rack layouts, and enclosure manufacturing.
- Ensure compliance with industry standards, including EMC, LVD, BS7671, and the Electricity at Work Act.
- Support equipment and system documentation in line with EU directives and safety requirements.
- Collaborate closely with engineering, project, and customer teams to ensure designs meet functional and compliance needs.
Requirements
- HNC/HND, apprenticeship, or equivalent in electrical/electronic or systems engineering.
- Minimum 45 years of experience in electrical/systems design and mechanical drafting.
- Proficient in CAD tools (AutoCAD or equivalent); experience with Electrical CAD packages like SEE Electrical or ETAP is a plus.
- Strong understanding of electrical design principles, manufacturing methods, and material properties.
- Experience working within regulatory and compliance frameworks (BS7671, EMC/LVD standards).
- Confident working autonomously and balancing multiple priorities in a fast-paced environment.
- Eligible for or already hold SC (Security Check) clearance.
Why Apply?
This is an excellent opportunity to be part of a forward-thinking engineering team working on mission-critical systems for maritime and defence sectors.
Youll take ownership of meaningful design work, contribute to innovative projects, and help shape how cutting-edge technology is delivered in real-world environments. ....Read more...
Type: Permanent Location: Surrey,England
Start: 21/08/2025
Salary / Rate: Competitive
Posted: 2025-08-21 08:25:06
