-
Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems.
You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed. ....Read more...
Type: Permanent Location: Greenford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £58000 Per Annum None
Posted: 2026-01-02 17:47:52
-
Electronics PCB Design Engineer required to join an existing product design team working on electronic and printed circuit assemblies PCBs for future products.
This is a fantastic opportunity for an experienced engineer to work on cutting edge technology.
Requirements
Degree or in Electronics, Electrical Engineering, or related subject.
Over 5 years of experience in electronics and multilayer PCB design in a commercial environment.
Over 2 years recent experience using enterprise level PCB design tools Cadence OrCAD, Allegro or Altium Designer.
High speed digital design and PCB signal integrity, stack-up, impedance control, ESD mitigation, and EMC compliance.
Video or camera image processing.
RF and FPGA design knowledge.
Analogue and digital layout, design for test, and design for manufacture.
Interest in high accuracy GNSS and automotive applications contributing to product development from concept through to production.
Responsibilities
Design and layout analogue and digital electronics for PCBs, including component footprint creation and library management.
Determine PCB configurations, outlines, interfaces and interconnects.
PCB fabrication and assembly drawings, bills of materials, and manufacturing data.
Support PCB assembly and resolve manufacturing issues.
Develop and implement PCB production test strategies, including the creation of test platforms and fixtures.
Hardware design verification, troubleshooting, and debugging using oscilloscopes, spectrum analysers, and other test equipment.
Collaborate with firmware developers to ensure seamless integration of hardware and software.
Support product assembly, customer support, and product documentation creation.
Design reviews and document the results.
If you're an experienced Electronic PCB Design Engineer with a passion for high quality design and a collaborative approach to problem solving, keen to drive innovation in the GNSS and automotive sector, then this is role is perfect. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2026-01-02 17:16:29
-
An established manufacturer of high-end electronic products is looking for skilled Electronics Technicians or Engineers to strengthen its growing production team.
What we are looking for
Hands-on experience in electronic assembly and production
Strong fault-finding and repair skills (diagnosing, testing, repairing electronic circuits)
Audio industry experience is an advantage, but not essential
Detail-oriented, reliable, and committed to high build quality
What you will do
Assemble and test advanced electronic products in a busy production environment
Diagnose and repair assemblies as part of repair and support services
Collaborate with a dedicated team to deliver consistently high standards
....Read more...
Type: Permanent Location: Maidstone, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £38000 Per Annum None
Posted: 2026-01-01 10:58:19
-
We are seeking a highly skilled Senior Electrical and Electronic Design Engineer to lead design projects from concept to delivery.
This role involves supporting product realisation, mentoring junior engineers, and working closely with internal teams and customers to ensure technical excellence.
Responsibilities
Lead electrical and electronic design on projects, producing specifications and documentation.
Prepare cost estimates and provide technical input for quotations.
Design schematics, wiring schedules, and PCBs where required.
Review and sign off manufacturing drawing packs: support assembly and testing stages.
Liaise with customers to clarify requirements and support acceptance testing.
Provide technical guidance and mentorship to colleagues.
Requirements
Formal qualification in electronic and electrical design.
Five years industry experience in electrical engineering at design/implementation level.
Strong experience designing test equipment and analogue/digital interface circuits.
Eligible for UK Security Clearance (SC).
18th Edition certification.
Experience in power engineering.
Knowledge of National Instruments hardware and software. ....Read more...
Type: Permanent Location: Dorset, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2026-01-01 10:46:10
-
We are looking for an AIT Technician to support the manufacture of ground support equipment.
The role involves hands-on assembly, wiring, and system integration of avionic and mechanical components, ensuring high standards of quality, safety, and efficiency.
Responsibilities
Install avionic and mechanical equipment, wiring, and systems.
Manufacture and assemble in-house components.
Maintain build records and follow safety procedures.
Conduct system integration tests and self-certify completed work.
Support continuous improvement and problem-solving initiatives.
Requirements
Hands on experience in avionic and electronic engineering or related field.
Ability to read and interpret engineering drawings.
Background in production, maintenance, or test environments.
Strong attention to quality and detail.
Preferred
NVQ Level 3 or equivalent in Aeronautical or Avionic Engineering.
Apprenticeship in electronic manufacture or installation.
Previous aerospace sector experience. ....Read more...
Type: Permanent Location: Farnborough, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2026-01-01 10:36:59
-
Manufacturing Engineer supporting precision instrument manufacture.
Key Skills
Optical Electronics or precision instrument manufacturing.
A degree in Physics, Optics, Electronics or equivalent industrial experience
CAD, reading electronic circuit diagrams, Opto-mechanical assemblies or writing scripts for automated measurements.
ERP Systems
You will contribute to the smooth running of the manufacturing line: kitting of parts, optical sub-assembly, mechanical pre-assembly, optical alignment, system test, performance reports, packing and shipping.
You will be doing
Continuous improvement, lean and 5S suggestions.
Cycle time reduction, cost reduction, quality and reliability initiatives.
Designing and sourcing jigs, tooling and fixtures.
Train Production staff as new processes, tools and product variants are introduced.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £29000 - £42000 Per Annum None
Posted: 2025-12-29 10:53:58
-
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies.
Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g.
First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g.
through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £24000 - £42000 Per Annum None
Posted: 2025-12-24 10:58:16
-
The Test Engineer is responsible for developing, executing and reporting Validation & Verification (V&V) assessment tests for technology manufacturing resources, fabrication and assembly.
Test Engineer???s contribute to the development and execution of V&V standards, evaluations and reporting for individual and comprehensive product testing programs.
Experience
Needs to be hands on
Very organized, good time management to ensure stuff happens within the project schedule and V&V group schedules
Technically strong to ensure tool is tested in a thorough way
Responsibilities and Duties
Contribute to the ongoing improvement or creation of procedures, processes and technologies associated with experiments, tests and the overall V&V methodology.
Assume responsibility for the creation, content, adoption and reporting of test plans and programs.
Assume responsibility for the assessment and optimization of test plans and programs with respect to coverage, efficiency and project risk reduction.
Optimize the effectiveness and efficiency of individual tests and broader product testing programs by applying and tailoring standard tests or creating specialized tests.
Employ techniques such as data acquisition, signal and noise analysis, significance studies, sample set optimization, confidence intervals, confidence levels and statistical analysis.
Anticipate test failure modes and events.
Engineer tests so as to record and provide effective investigative test data.
Contribute to analytical and investigative activities such as FMEA, Hazard Analysis and Risk Control, and RCA.
Integrate these and associated methodologies into the development, execution and analysis of experiments and tests.
Execute experiments and tests or oversee their execution by technicians, as required.
....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £42000 Per Annum None
Posted: 2025-12-24 10:58:14
-
The Manufacturing Engineer is responsible for complex electronic assemblies.
Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics.
Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g.
First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g.
through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £46000 Per Annum None
Posted: 2025-12-24 10:57:08
-
Electrical Harness Design Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and FMEA for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g.
lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2025-12-24 10:52:53
-
Mechanical Engineer required to design enclosures with electronic contents using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g.
lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £55000 Per Annum None
Posted: 2025-12-24 10:51:49
-
Mechanical Engineer required to design and manufacture metal parts ideally for automotive application using FEA Analysis, CFD Simulation and 3D Modelling.
This is a hands-on mechanical design role working on concept to production of electronic housing and potting boxes from metal.
Key skills
3D mechanical CAD design experience including the preparation of tolerance engineering drawings
Ideally with Autodesk Fusion and Fema for vibration analysis.
Good degree in mechanical engineering or equivalent experience
Strong numerical and analysis skills
Practical mechanical engineering skills for building prototypes
Experience working on road vehicles professionally or as a hobby
Machine shop tools e.g.
lathe, mill exposure.
Knowledge of Python for data analysis and visualisation
What you will be doing
Mechanical component design of two novel sensors, including a magnetic clamping system and mould for a potted device.
Resonance analysis in Femap and design vibration damping
Deploy and repair devices in the field
Write assembly and deployment procedures for your designs ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £50000 Per Annum None
Posted: 2025-12-24 10:43:18
-
Assembler required to assemble low volume high value precision Engineered robotic devices.
You will be assembling and testing products also troubleshooting and resolving any build issues.
You will:
Assemble components of all Product Lines.
Select correct tools and fixtures.
Test assembled products.
Troubleshoot and resolve problems associated with the assembly and testing of products.
read blueprints
identify components
use pertinent hand tools
rework techniques
operate equipment
dimensioning and setting tolerances of mechanical parts and assemblies
Create labor records for all transactions.
Use the guiding principles and tools of the Manufacturing System to drive continuous improvement. ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £28000 Per Annum None
Posted: 2025-12-23 09:46:20
-
A fantastic job opportunity has arisen for a Senior Manufacturing Engineer in East Sussex.
My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Senior Manufacturing Engineer in East Sussex will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards.
You will also work to ensure the proposed design concepts can be manufactured cost-effectively.
You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis).
This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Senior Manufacturing Engineer must have experience with PCBA and leading a manufacturing or production team.
As the Senior Manufacturing Engineer in East Sussex, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable).
You will also have an Engineering Degree or equivalent and provable experience in a similar position.
Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Senior Manufacturing Engineer East Sussex job, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834. ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2025-12-23 08:41:15
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £14 - £20 Per Annum None
Posted: 2025-12-22 09:33:35
-
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria.
Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2025-12-21 11:34:35
-
Test Technician - Electronics
Are you a Test Technician with hands-on experience testing electronic or power-based systems, looking to work with high-power, cutting-edge technology?
Our client, a global leader in green energy technology, is expanding their specialist R&D and test team in Glasgow, Scotland.
This hybrid role offers strong technical exposure, long-term development, and the opportunity to support advanced battery charging and power conversion products used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Test Technician - Electronics job are:
Test industrial charging systems, comparing results to given specifications.
Construct, modify and maintain test fixtures and setups, following electrical diagrams.
Setup equipment such as power supplies, oscilloscopes and data loggers.
Assembly of cables and connectors for test setups.
Prepare reports to be shared with R&D engineers and management.
Requirements for this Test Technician - Electronics job are:
Experience working with high power electrical systems.
Knowledge of product test procedures and the ability to follow instructions.
Practical knowledge of laboratory equipment such as Thermal chambers, power supplies and oscilloscopes would be ideal.
Otherwise, the potential to transfer skills from another background.
The ability to work safely with high voltages, as our current products may be powered by up to 660Vac, 3Ph, input.
Experience in industrial, defence, rail, power, or similar sectors is beneficial.
To apply for this Test Technician - Electronics role: Please send your CV to NDrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2025-12-19 13:47:11
-
Assembler required to assemble low volume high value precision Engineered robotic devices.
You will be assembling and testing products also troubleshooting and resolving any build issues.
You will
Assemble components of all Product Lines.
Select correct tools and fixtures.
Test assembled products.
Troubleshoot and resolve problems associated with the assembly and testing of products.
dimensioning and setting tolerances of mechanical parts and assemblies
Create labor records for all transactions.
Use the guiding principles and tools of the Manufacturing System to drive continuous improvement. ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £28000 Per Annum None
Posted: 2025-12-19 10:33:52
-
Holt Engineering is currently working with an innovative manufacturing company based in Waterlooville, who are on the lookout for an experienced Cable Assembler.
The company are a leading manufacturer of electronics and distribute their products across the world for the electronics industry.
This role is offering a Temporary to Permanent contract, working Monday to Thursday 7:30-4:30 with an early finish on Friday!
As a Cable Assembler, you will be:
- Following technical drawings
- Soldering to IPC 620 standards
- Cutting, crimping, and striping cables
- Cable looming and wiring
To be a successful Cable Assembler:
- Have Cable assembly experience
- Previous experience within Looming and Wiring
- Have soldering experience (Preferably IPC 620 standard)
- Good attention to detail and be able to work to tight deadlines
- Previous experience within electrical only industry
This role is paying between £12.21-£14ph (depending on experience)
Sound like a good fit for a Cable Assembler? Great, then we would love to hear from you!
Please call Sam on 07485 390946 or APPLY NOW
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated. ....Read more...
Type: Contract Location: Waterlooville,England
Start: 19/12/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £14 per hour
Posted: 2025-12-19 08:23:04
-
A Process Engineer is sought to join an innovative engineering team in Norfolk, contributing to the development, optimisation, and validation of manufacturing processes for high-reliability electronic and microelectronic assemblies used in commercial, aerospace, and defence applications.
The Process Engineer, Norfolk, will be expected to develop a strong understanding of production engineering within regulated environments, learning from peers and senior engineers in technical areas and industry best practices.
This will include microelectronic package assembly, electronics test and assembly processes, design for manufacturability, and scalable production methods.
Responsibilities include:
Work with cross-functional engineering, quality, and operations teams to define and implement robust manufacturing and process strategies aligned with customer and regulatory requirements.
Lead process development and optimisation activities for microelectronic assembly and electronics manufacturing, ensuring quality, cost, and delivery targets are met.
Act as the nominated engineer for assigned programmes, providing technical ownership and engineering oversight.
Support new product introduction activities through DFM reviews, process validation, and production readiness.
Develop and maintain comprehensive process documentation including work instructions, control plans, FMEAs, and capability studies.
Investigate production issues using structured root cause analysis techniques and drive corrective and preventive actions.
Monitor equipment performance, supporting preventative maintenance and continuous improvement initiatives.
Ensure compliance with IPC standards and relevant aerospace and defence quality regulations.
Provide technical support during audits, customer visits, and internal reviews.
Key skills & experience:
Degree in Mechanical, Electrical, Manufacturing Engineering, or a related discipline, or equivalent industry experience.
Proven experience in a production or process engineering role within aerospace, defence, semiconductor, or microelectronics environments.
Strong understanding of electronics manufacturing and microelectronic assembly processes.
Familiarity with IPC standards and quality systems in regulated industries.
Experience with continuous improvement methodologies such as Lean and Six Sigma.
Strong analytical, problem-solving, and project management skills.
Effective communication skills and the ability to collaborate across multidisciplinary teams.
Eligibility for UK SC clearance or the ability to obtain it.
How to apply:
Apply now for the Process Engineer role in Norfolk.
Send your CV to adighton@redlinegroup.Com
Or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £45000 - £48000 per annum
Posted: 2025-12-17 15:52:38
-
Mechanical and Electrical Manufacturing Technician required to join a growing production team, supporting the build of equipment used in cutting edge marine and subsea applications.
This is a hands on role ideal for someone with strong electronics assembly and wiring experience.
Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines.
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £42000 Per Annum None
Posted: 2025-12-17 09:34:23
-
Electrical or Electronics Designer required to develop, implement and test components for complex electro-mechanical devices required to work in extreme environments.
The role exists within a precision engineering environment where you will work as a part of cross-functional teams on the full design life-cycle including technical planning for system integration, test and validation, authoring of functional specifications and the development of new principles and concepts.
You will also perform technical planning for system integration, test and validation, authoring of functional specifications, and contribute to the development of new principles and concepts.
Requirements
MEng or MSc in Electrical and/or Electronic Engineering
Electrical/Electronic Design
Digital design, Microprocessors (both Microcontrollers and DSP's.), FPGA design, Signal processing, Analog design including amplifiers and filters, Power electronics, Motor control.
Assembler, ???C???, RTOS
Troubleshooting and Failure Analysis.
Electrical/Electronic systems assembly/disassembly.
Schematic CAD and VHDL entry ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £43000 - £55000 Per Annum None
Posted: 2025-12-16 16:27:05
-
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
Specifically to build and tests various components of a complex downhole drilling tools.
....Read more...
Type: Permanent Location: Strouod, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £36000 Per Annum None
Posted: 2025-12-16 16:26:00
-
Senior Mechanical Design Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Mechanical Design Engineer to join a global RF technology group as part of a specialist R&D team in the UK.
This role focuses on designing and developing advanced mechanical solutions for RF, antenna, and electronic systems used across aerospace, defence, naval, space, and medical applications.
This position is ideal for a highly motivated and innovative engineer with extensive experience in mechanical design for demanding environments, who thrives on solving complex technical challenges and working collaboratively with multidisciplinary teams across international sites.
Main Responsibilities of the Senior Mechanical Design Engineer based in Lincoln, UK:
Lead and contribute to the mechanical design of RF, antenna, and system products from concept through CAD, prototyping, fabrication, and final assembly.
Collaborate closely with RF and electronics engineers to optimise designs for challenging applications and integrate systems effectively.
Produce detailed CAD models, drawings, and analysis for strength, vibration, thermal behaviour, environmental performance, and compliance with military standards (e.G., MIL-STD-810).
Support proposal generation with concept CAD, analysis, and presales input.
Develop and optimise prototypes, models, fixtures, and specialised test equipment.
Oversee environmental and mechanical testing, verification, and product qualification.
Work directly with suppliers and manufacturing partners to ensure high-quality fabrication and testing.
Industrialise designs and manage handover to production, including documentation, training, and assembly instructions.
Produce technical reports, customer-facing documentation, and participate in design reviews with customers.
Requirements of the Senior Mechanical Design Engineer based in Lincoln, UK:
Bachelor's degree in Mechanical Engineering (Master's preferred).
Extensive experience in mechanical product design, ideally within defence, aerospace, naval, or space applications.
Proven ability to deliver designs from concept to CAD, fabrication, and final assembly.
Experience in design for environmental requirements including vibration, shock, humidity, and ingress protection.
Strong expertise in environmental qualification, product testing, and verification.
Mastery of CAD tools (e.G., Solidworks, Autodesk Inventor).
Knowledge of composites, structures, aerospace, robotics, or electromechanical systems.
Practical experience in prototyping, machining, and assembly.
Experience working with suppliers, machinists, and toolmakers.
Proven track record of working directly with customers in a consultative and collaborative manner.
Excellent problem-solving skills, resilience, and attention to detail.
Desirable Experience:
Shipborne, maritime, or space-related equipment.
Thermal, ingress, corrosion, and EMC considerations in enclosure design.
Mechanical design of healthcare-related products.
Experience with FEA tools and MATLAB.
To apply for this Senior Mechanical Design Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.Com or call 01582 878 830 / 07961 158 784 ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £75000 - £90000 per annum
Posted: 2025-12-16 15:35:40
-
The Test Engineer will join a Systems Engineering team critical in space thruster engine development.
You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components.
This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop.
Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc.
Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2025-12-15 10:57:45
